Bosch UC MCM 5100, MCM 5000m, UC MCM 5200 User Manual

5 (1)
Owner’s Manual
Food Processor Plus
models:
MCM 5000 UC • MCM 5100 UC
MCM 5200 UC
READ THIS MANUAL
thoroughly for important safety and operating
1
IMPORTANT SAFEGUARDS
WARNING: A risk of fire and electrical shock exists in all electrical appliances and may
cause personal injury or death.
When using electrical appliances, basic safety precautions should always be followed, including the following:
1. Read all instructions before using the food processor.
2. T o protect against risk of electric shock, do not put the drive unit in or under water or other liquid.
3. This appliance is not for use by children.
4. Close supervision is necessary when any appliance is used near children.
5. Do not leave appliances unattended during operation.
6. Unplug from outlet when not in use, before putting on or taking off parts and before cleaning.
7. T o disconnect: switch appliance of f then remove plug from power supply .
8. Avoid contacting moving parts. Keep hands, hair, clothing, as well as spatulas and other utensils away from whisks, blades, disc, dough hook and/or other moving parts during operation to reduce the risk of injury to persons and/or damage to the appliance or its attachments.
9. Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions or is dropped or damaged in any manner. Return appliance to the nearest authorized service facility for examination, repair or electrical or mechanical adjustment.
10. The use of attachments not recommended or sold by the appliance manufacturer may cause fire, electric shock or injury and is therefore prohibited.
1 1. Do not use outdoors or when standing in a damp area.
12. Do not let cord hang over edge of table or counter , or touch hot surfaces.
13. Always operate appliance with covers in place.
14. Blades are sharp. Handle carefully due to risk of injury .
15. Remove blades, hooks, whisks or discs from mixing bowl before washing.
NOTE: ALSO BE SURE TO READ THE WARNINGS AND CAUTIONS THAT ARE
PROVIDED BEFORE EACH A TT ACHMENT’S OPERA TING INSTRUCTION.
SAVE THESE INSTRUCTIONS
2
TABLE OF CONTENTS
IMPORT ANT SAFEGUARDS .................................................................. 2
T able of contents..................................................................................... 3
ABOUT YOUR FOOD PROCESSOR ...................................................... 4
Bosch Food Processor ........................................................................... 4
Unpacking............................................................................................... 4
Electrical specifications ............................................................................ 4
Before using for the first time .................................................................. 4
Getting to know your Food Processor ...................................................... 6
Power unit features .............................................................................. 6-7
Special features of mixing bowl ............................................................... 7
Getting started ................................................................................... 8-10
STANDARD A TTACHMENTS ................................................................ 10
Mixing bowl w/multifunction blade, whisk, hooks and discs................... 10
How to use multifunction blade .............................................. 10-11
Placing into operation with multifunction blade.............................. 11
How to use dough hook ................................................................ 12
How to use whipping whisk.................................................... 12-13
How to use slicing and grating discs ........................................... 14
Care and cleaning of bowl and its accessories ........................... 16
Blender with unbreakable plastic jar ........................................................ 16
How to use blender...................................................................... 17
Placing blender into operation...................................................... 18
Example of use of blender ........................................................... 18
Care and cleaning of blender........................................................ 19
Citrus Juicer........................................................................................... 19
Placing into operation with citrus juicer........................................ 20
Care and cleaning of mixing bowl with citrus juicer ...................... 20
Juice Extractor....................................................................................... 20
Placing into operation with juice extractor.................................... 21
Care and cleaning of mixing bowl with juice extractor .................. 21
SERVICE and REP AIR .......................................................................... 22
TROUBLESHOOTING ................................................................. 23
SAMPLE RECIPES .......................................................................... 24-25
Important Notes ..................................................................................... 26
BOSCH small appliance warranty ........................................................... 27
HOUSEHOLD USE ONLY
3
ABOUT YOUR FOOD PROCESSOR
Congratulations on having selected one of the Bosch Food Processors. A series of food processors designed to simplify common food preparation tasks of the home cook: stirring, beating, slicing, mincing, grating and chopping as well as juicing.
three-quart capacity mixing bowl, cover with integral feeding tube and pusher/ measuring cup, multifunction blade, whipping whisk, dough hook, reversible slicing disc, reversible coarse grating disc, fine grating disc, 6-cup capacity blender, citrus juicer, juice extractor motor drive cover and spatula.
As you read through these instructions, please pay particular attention to the IMPORTANT SAFEGUARDS. Specific safeguards for the attachments, as well as warnings and cautions, are provided in each section describing the operation of that
particular attachment.
Bosch Food Processor
The Bosch Food Processor Plus is available in 3 models:
The MCM 5000 UC comprised of a two-speed electronic power unit with integral cord storage, three-quart capacity mixing bowl, cover with integral feeding tube and pusher/ measuring cup, multifunction blade, beater, dough hook, reversible slicing disc, reversible coarse grating disc, citrus juicer, motor drive cover and spatula.
The MCM 5100 UC comprised of two-speed electronic power unit with integral cord storage, three­quart capacity mixing bowl, cover with integral feeding tube and pusher/ measuring cup, multifunction blade, beater, dough hook, reversible slicing disc, reversible coarse grating disc, 6­cup capacity blender, citrus juicer , motor drive cover and spatula.
The MCM 5200 UC comprised of a four-speed electronic power unit with automatic cord rewind,
Unpacking
Carefully remove the power unit from its packaging and place it on the counter so it is ready to use. As you remove the accessories from the carton, check them against figure 1 to assure that all the standard parts are present.
Electrical Specifications
Check to make sure that the voltage on which your food processor is to operate is the same as specified on the rating plate. Standard North American models have an electrical power rating of 530-watt maximum power rating with the attachment that draws the most power (some attachments may draw less power).
Before Using for the First Time
Before using any of the attachments for the first time it is recommended they be washed, rinsed well and dried. Of the attachments supplied with the systems in this manual, all parts, except the blender’s jar/blade assembly , are dishwasher safe:
> The blender’s jar/blade assembly
should be washed under running water and dried.
Note: It is recommended that the
blender jar/blade assembly never be left to stand in water or soap solution, to prevent the bearing lubricant from being washed out.
4
MCM 5000 UC
MCM 5100 UC
MCM 5200 UC
Figure 1
5
Getting to Know Y our Food Processor
The Bosch Food Processors are comprised of various attachments, depending on the system purchased (see above).
Bosch engineers are continually working on expanding the usefulness of your Bosch Food Processor. If there is some type of accessory in which you are interested, that is not presently available for your Bosch Food Processor, please either write us at:
Bosch Small Appliances
Customer Support
BSH Home Appliances 5551 McFadden Avenue Huntington Beach, CA 92649
or call us at:
1 (866) 44BOSCH
[1 (866) 442-6724]
Power Unit Features
The MCM 5000 power units have the following features, refer to figure 2:
530-watt motor One of the most powerful motors offered with any food processor system.
Electronic speed control Six-position rotary switch, on the MCM 5200, see figure 2a; four-position rotary switch, on the MCM 5100 and MCM 5000, figure 2b, is located at the front of the power unit. The MCM 5200 has 4 speeds plus a momentary pulse function and a stop position “O/Off,” while the MCM 5200 and MCM 5000 have 2 speeds plus a momentary pulse function and a stop position “O/Off,” see figure 2a.
Figure 2.
6
Built-in Safety Cutout
The Bosch Food Processors are provided with a built-in safety cutout to protect the motor against overheating.
If the safety cutout should open:
a. Turn the processor to the off position
“O/Off” and unplug.
b. Contact Bosch Small Appliances
Customer Support, see page 6, for closest Bosch authorized service center.
c. T ake, or ship, the food processor to
a Bosch authorized service center to have the safety cutout replaced.
Safety Cover Interlock The Bosch Food Processor incorporate in their design a special safety feature; the Safety Cover Interlock, figure 2c. This feature prevents the rotary switch from being turned from the Off position, “O/Off,” if cover has not been placed on the bowl properly and rotated to trip the Safety Cover Interlock.
Safety Motor Drive Cover Another special safety feature incorporated in the Bosch Food Processors is the Safety
Motor Drive Cover, figure 2d. The Safety
Motor Drive Cover must be in place on the high speed blender drive when not in use or the motor will not start when turned to one of its On positions, or if removed while power unit is running will bring the power unit to a stop.
Dual drives
The Bosch Food Processors come with three drives:
• A high-speed drive directly coupled to the motor, used to drive the blender and other special accessories, located under the Safety Motor Drive Cover, figure 2e.
• A dual drive, figure 2f, used by bowl accessories: one high-torque drive used to drive dough hook, citrus juicer and other special accessories requiring high torque; and, a high speed drive used to drive the multifunction blade, beater, whipping whisk and other accessories requiring higher speeds.
Convenient cord storage The MCM 5200 UC model stores the cord internally , on an automatic cord winder, see figure 2g.
Four rubber feet Four rubber feet provide the ultimate in stability, while also serving to isolate the power unit from the hard surface to minimize noise and vibration, figure 2h.
Special features of mixing bowl
The mixing bowl has a number of special features:
Dual feeding tube The three-quart capacity mixing bowl comes with two feeding tubes molded into the cover. The small tube may be used for slicing or grating items that you wish to stand on end.
Pusher/measuring cup In addition to its ability to act as both a pusher and a measuring cup, the slimmer portion of the pusher has a hole at the bottom to allow it top be used as a funnel when liquids need to be added to the mixture in the bowl. See figure 3a.
Filling tray The MCM 5200 UC, Bosch Food Processor, also comes with a filling tray that can be mounted on the feeding funnel to simplify the feeding of material into the bowl, figure 3b.
7
Figure 3.
Getting Started
The operation of your Bosch Food Processor is summarized below.
Specific instructions for using each of the attachments, provided with the food processor systems covered by this manual, follow the summarized instructions. Please read the specific instructions thoroughly before using that attachment, paying particular attention to the IMPORTANT SAFEGUARDS and WARNINGS provided.
1. Place power unit on suitable work surface.
Before using the food processor with any of the attachments, the power unit should be placed on a suitable work surface. The surface should be sturdy , smooth and clean; make sure that there is no flour or oil on the surface. A clean, smooth surface will provide the best footing for the suction cup feet on the power unit and will limit slipping and/or “walking,” see figure 2h.
2. Plug power unit into power supply.
Pull the power unit’s cord out to appropriate length and plug it into a convenient nearby outlet.
3. Select attachment to be used.
Select the attachment you wish to use.
4. Cover the drive not being used.
If dual drive is to be used for selected attachment, make sure that safety motor drive cover is placed over the
high speed blender drive and pressed down until it snaps in place.
If high speed blender drive is to be used, remove the safety motor drive cover from the high speed blender drive and place mixing bowl over dual drive and turn clockwise to lock into position as shown in figure 4a. Next place the mixing bowl cover, with pusher/measuring cup in the feeding tube, on the bowl. Make sure arrows on cover and bowl are aligned, so that tabs on bowl fit into channels in cover and then turn cover clockwise until tab on cover enters cover interlock and turn until tab clicks into place, figure 4b.
Figure 4.
5. Place selected attachment.
Place the selected attachment on power unit. See specific instructions for attachment selected. Specific instructions are located on pages listed below:
Attachment Pages
Bowl w/multifunction blade ..... 10–12
with dough hook .......................... 12
with whipping whisk/beater ..... 13-14 with slicing and grating disc .... 14-16
Blender .....................................16–18
Citrus juicer .............................. 19-20
Juice extractor........................... 20–21
Table 1.
8
6. Operate unit with rotary switch.
Once the attachment is in place, the speed of its moving components can be controlled through the use of the rotary switch at the front of the power unit. See figure 2. The rotary switch has six or four positions, depending on the model you have: All MCM models have the following: a. “M,” a momentary “pulse” position
that provides full speed and power
for the time it is held in position. b. “O/Off,” the off position. The MCM 5000 and 5100 have 2 speeds
c. Two speeds labeled 1 and 2.
Speed 1 is the lowest speed. The MCM 5200 has 4 speeds:
d. Four speeds labeled 1, 2, 3 and 4.
Speed 1 is the lowest speed. The
speed increases with each
succeeding step up to the highest
speed, speed 4.
9. Continue use.
If the attachment was of the batch-feed type and you wish to continue using the attachment, empty the bowl or jar of the attachment per its specific instructions and reinstall the attachment as before. Repeat steps 5 through 8 as often as necessary to complete work.
10. Work completed, remove attachment.
If the attachment is of the continuous feed type or is the batch type and you have completed the work you wished to perform with the attachment, remove the attachment from the power unit per the instructions for the specific attachment being used.
1 1 . Place contents (batch-feed type).
If the attachment is the batch feed type, disassemble per the specific attachment’s instructions and place the contents in a suitable container .
All models of the Bosch Food Processor incorporate a built-in safety
cutout switch to protect the motor against overheating. If the safety
becomes activated, the power unit will stop. If power unit should stop even though there is power to the unit see TROUBLESHOOTING at the back of this manual .
7. T urn power unit off.
When your work with the attachment is completed or the capacity of the batch-feed attachment has been reached, turn the power unit to the Off position, “O/Off,” and unplug.
8. Remove the attachment.
Remove the attachment from the power unit, per instructions for the specific attachment being used.
12. Care and cleaning.
Once you have completed working with the Bosch Food Processor, the next step is to disassemble and clean the attachments. If you wish to use another attachment, please return to
step 3, above.
Power unit
With the power unit turned Off and unplugged, it should be cleaned only with a clean, damp cloth. Then wipe off the safety motor drive cover and reinstall on the power unit, if necessary. Never use coarse or caustic cleaning products to clean the power unit. Never immerse the power unit in water.
The power unit may be left on the counter or stored for future use. If the unit will be stored, store the cord and lift the power unit and place in your chosen storage area.
9
Loading...
+ 19 hidden pages