Bosch LTC 0455, LTC 0435 User Manual

0 (0)

LTC 0435 & LTC 0455

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Installation Manual

 

Installatiehandleiding

 

 

 

 

 

 

 

 

EN

Digital Color Cameras

NL

Digitale Kleurencamera

 

 

 

 

Manuel d’installation

 

Manuale d’installazione

 

 

 

 

 

 

 

 

 

 

 

 

 

FR

Caméra Numérique

IT

Videocamera Digitale a Colori

 

 

 

 

Couleur

 

 

 

 

 

 

 

 

 

Installationsanleitung

 

Manual de Instruções

 

 

 

 

 

 

 

 

DE

Digitale Farbkamera

PT

Câmara Digital Colorida

 

 

 

 

Manual de instalación

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

ES

Cámara Digitale de Color

ZH

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Bosch LTC 0455, LTC 0435 User Manual

LTC 0435 & LTC 0455 | Installation Manual

EN | 1

 

 

SAFETY PRECAUTIONS

DANGER

The lighting flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk to persons.

WARNING

The exclamation point, within an equilateral triangle, is intended to alert the user to the presence of important operating and maintenance accompanying the appliance.

CAUTION

To reduce the risk of electric shock, do not remove cover (or back). No user - servicable parts inside. Refer servicing to qualified service personnel.

Important Safeguards

1.Keep these instructions.

2.Heed all Warnings.

3.Follow all instructions.

4.Do not use the apparatus near water.

5.Clean with a dry cloth only.

6.Do not install near heat sources such as radiators, heat registers, stoves, or other apparatus that generates heat (including amplifiers).

Bosch Security Systems | 2004-12 | Version 3

LTC 0435 & LTC 0455 | Installation Manual

EN | 2

 

 

7.Do not defeat the purpose of a polarized or grounded mains plug. A polarized plug has dissimilar prongs (one wider than the other) to ensure correct polarity, while a grounded plug has an additional 'ground' prong provided for your safety. If the plug supplied with the apparatus does not fit into your outlet, consult an electrician for advice.

8.Protect the power-supply cord from being walked on or pinched, particularly close to plugs, receptacles and the point where it exits from the apparatus.

9.Only use attachments and accessories (including stands, tripods, mounting brackets and housings) specified or recommended by the manufacturer.

10.Unplug the apparatus during lightning storms and when unused for extended periods.

11.Do not attempt to service this unit yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

12.Servicing is required when the apparatus does not function in the normal way, has been dropped, if liquid has been spilled on it, or if it has been exposed to rain or water. Unplug the unit from the outlet and refer servicing to qualified service personnel.

13.An all-pole mains switch with contact separation of at least 3 mm in each pole shall be incorporated in the electrical installation of the building.

WARNING

To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.

Bosch Security Systems | 2004-12 | Version 3

LTC 0435 & LTC 0455 | Installation Manual

EN | 3

 

 

FCC INFORMATION

CAUTION

Any changes or modifications to construction of this device that are not expressly approved by the party responsible for compliance could void the userfs authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Re-orient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

Bosch Security Systems | 2004-12 | Version 3

LTC 0435 & LTC 0455 | Installation Manual

EN | 4

 

 

SPECIFICATIONS

 

LTC 0435/x0

 

LTC 0455/x1

 

 

 

 

 

Standard resolution

 

High resolution

 

 

 

 

 

 

 

 

Standard

PAL

 

NTSC

 

PAL

 

NTSC

 

 

 

 

 

 

 

 

Active pixels (H x V)

512 x 582

 

512 x 492

 

752 x 582

 

768 x 494

 

 

 

 

 

 

 

Imager

 

 

1/3" interline CCD

 

 

 

 

 

 

Resolution

330 TV lines

 

540 TV lines

 

 

 

 

Minimum illumination

<0.39 lux

 

<0.65 lux

 

 

 

 

 

<0.26 lux with Nightsense™

Signal-to-noise ratio

 

 

> 50 dB

 

 

 

 

 

 

Video output

 

 

1 Vpp, 75Ω

 

 

 

 

 

 

 

Y/C output

 

NA

 

Y: 1 Vpp, 75 Ω

 

 

 

 

 

C: 0.3 Vpp 75 Ω

Synchronization

 

Internal or Line-Lock (selectable)

 

 

 

Shutter

Auto / Flickerless / Off (selectable)

 

PAL: 1/50 - 1/125000 - NTSC: 1/60 - 1/150000

Nightsense™

 

NA

 

Auto / Forced / Off

 

 

 

 

 

(selectable)

Autoblack

 

 

On / Off (selectable)

 

 

 

AGC

On (0-21 dB)/ Off (0 dB) (selectable)

 

 

 

 

 

BLC

 

 

On / Off (selectable)

 

 

 

ATW

Auto 2500 to 9000 K (with 'Hold' mode)

 

 

 

 

 

Lens mount

 

 

C and CS compatible

 

 

 

 

 

ALC

 

Video-iris or DC-iris (auto detect)

 

 

 

Power supply

LTC 04x5/1x & /2x: 12 to 28 VAC or 11 to 36 VDC

 

LTC 04x5/5x & /6x: to 2 VAC

Power consumption

 

 

<4 W

 

 

 

Dimensions (HxWxL)

58 x 66 x 122 mm (2.28 x 2.6 x 4.8 inch without lens)

 

 

 

 

Weight

 

450 g (0.99 lbs) (without lens)

 

 

 

Camera mount

Two 1/4" 20 UNC - isolated (bottom) and non-isolated

 

 

 

 

(top)

 

Operating temperature

 

-20ºC to +50ºC (-4ºF to +122ºF)

 

 

 

Controls

On-screen display (OSD) with softkey controls

 

 

 

 

 

 

 

 

Bosch Security Systems | 2004-12 | Version 3

Loading...
+ 11 hidden pages