Loading...
Security Systems
Product |
Document type |
Release # |
SAP/Doc number |
Release date |
DVR 600 Series |
Release notes |
V2.0.7 |
|
2013.02.12 |
Video Recorder 600 Series new firmware version
1 DVR 600 Series firmware version 2.0.7 (date 2013-02-08)
File name: 600series.bin (2013-02-08)
This release includes the following improvement:
•Removed some wanIP providers that are not available anymore to solve issues with some DynDNS providers
•Corrected web site for DDNS server ‘sitelutions’.
•Solved issue that sometimes after several connection losses the system does not allow to reconnect again until power cycling the DVR.
•Security update for mobile devices.
Bosch strongly recommends upgrading to the latest firmware to achieve the best possible functionality, compatibility and performance.
2 Update procedure
To update the DVR 600 Series to the latest firmware, please refer to the Video recorder 600 Series Operation Manual, chapter 6.6.5 or follow instructions below:
1.Put firmware v2.0.7 via a PC on the root of a USB memory stick (file name: 600series.bin [date 2013-02-08])
2.Insert the USB stick into the front USB connector of the DVR
3.Log on as “ADMINISTRATOR” in the local unit
4.Select Menu and go to the “System > Configuration” screen
5.Select Update firmware to upgrade the DVR software. In this case, the current DVR settings and video will not be deleted or replaced during the update process.
Figure: Update firmware menu
www.BoschSecurity.com |
Page 1 of 6 |
|
Security Systems
Product |
Document type |
Release # |
SAP/Doc number |
Release date |
DVR 600 Series |
Release notes |
V2.0.7 |
|
2013.02.12 |
6.Select OK to begin the update process or click Cancel to stop and exit. After the update process is completed you have to press OK so that the system will automatically restart.
Alternative a firmware upgrade can be performed via the Web Client:
-Open Internet Explorer and type on the address bar the network IP address of the unit
-Log on by entering the User ID (default ADMINISTRATOR) and Password (default 000000)
-Select the configuration mode by clicking on the “Configuration” button
-Select ‘System’ and then ‘Configuration’
-Browse to the v2.0.7 firmware file name “600series.bin” (date 2013-02-08)
-Press the “Update” button
Firmware will be automatically updated and unit will be restarted.
3 DVR 600 Series firmware version history
3.1Version 1.1.0
File name: 600series.bin (2010-11-30)
Initial firmware version
3.2Version 1.2.0
File name: 600series.bin (2011-03-28)
This release includes the following improvement:
-PC application support (CC v3.32) of DVR 600 Series with firmware version 1.2.0.
3.3Version 1.3.2
File name: 600series.bin (2011-09-27)
This release includes the following improvement:
•Improve dome control using Intui keyboard.
oImmediate dome control when full screen is selected for cameras assigned for dome control.
•Quad image performance on Mon. A improved (diagonal lines were more jagged than in other multiscreens).
•Mon. B image performance improved (shown some flickering by certain monitor/camera combinations)
•Setting added to Auto delete video older than 3 days. For some countries this is required by law.
•SMTP port number was default on 587 when SSL is enabled.
Page 2 of 6
Loading...