DVR1 Series
Instruction Manual
EN Single Channel,
Color Digital Video
Recorder
Applicable Models:
DVR1EP08, DVR1EP16,
DVR1EP32, and DVR1EP32A
Important Safeguards
1.Read, Follow, and Retain Instructions - All safety and operating instructions should be read and followed before operating the unit. Retain instructions for future reference.
2.Heed Warnings – Adhere to all warnings on the unit and in the operating instructions.
3.Attachments - Attachments not recommended by the product manufacturer should not be used, as they may cause hazards.
4.Installation Cautions - Do not place this unit on an unstable stand, tripod, bracket, or mount. The unit may fall, causing serious injury to a person and serious damage to the unit. Use only manufacturer-recommended accessories, or those sold with the product. Mount the unit per the manufacturer's instructions. Appliance and cart combination should be moved with care. Quick stops, excessive force, or uneven surfaces may cause the appliance and cart combination to overturn.
5.Cleaning - Unplug the unit from the outlet before cleaning. Follow any instructions provided with the unit. Generally, using a damp cloth for cleaning is sufficient. Do not use liquid cleaners or aerosol cleaners.
6.Servicing - Do not attempt to service this unit yourself. Opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
7.Damage Requiring Service - Unplug the unit from the main AC power source and refer servicing to qualified service personnel under the following conditions:
•When the power supply cord or plug is damaged.
•If liquid has been spilled or an object has fallen into the unit.
•If the unit has been exposed to water and/or inclement weather (rain, snow, etc.).
•If the unit does not operate normally, when following the operating instructions. Adjust only those controls specified in the operating instructions. Improper adjustment of other controls may result in damage, and require extensive work by a qualified technician to restore the unit to normal operation.
•If the unit has been dropped or the cabinet damaged.
•If the unit exhibits a distinct change in performance, this indicates that service is needed.
8.Replacement Parts - When replacement parts are required, the service technician should use replacement parts specified by the manufacturer, or that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electrical shock, or other hazards.
9.Safety Check - Upon completion of servicing or repairs to the unit, ask the service technician to perform safety checks to ensure proper operating condition.
10.Power Sources - Operate the unit only from the type of power source indicated on the label. If unsure of the type of power supply to use, contact your dealer or local power company.
•For units intended to operate from battery power, refer to the operating instructions.
•For units intended to operate with External Power Supplies, use only the recommended approved power supplies.
•For units intended to operate with a limited power source, this power source must comply with EN60950. Substitutions may damage the unit or cause fire or shock.
•For units intended to operate at 24VAC, normal input voltage is 24VAC. Voltage applied to the unit's power input should not exceed 30VAC.
User-supplied wiring, from the 24VAC supply to unit, must be in compliance with electrical codes (Class 2 power levels). Do not ground the 24VAC supply at the terminals or at the unit's power supply terminals.
11.Coax Grounding - If an outside cable system is connected to the unit, ensure that the cable system is grounded. U.S.A. models only--Section 810 of the National Electrical Code, ANSI/NFPA No.70, provides information regarding proper grounding of the mount and supporting structure, grounding of the coax to a discharge unit, size of grounding conductors, location of discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.
12.Grounding or Polarization - This unit may be equipped with a polarized alternating current line plug (a plug with one blade wider than the other). This safety feature allows the plug to fit into the power outlet in only one way. If unable to insert the plug fully into the outlet, try reversing the plug. If the plug still fails to fit, contact an electrician to arrange replacement of the obsolete outlet. Do not defeat the safety purpose of the polarized plug.
Alternately, this unit may be equipped with a 3-wire grounding plug (a plug with a third pin, for
grounding). This safety feature allows the plug to fit into a grounding power outlet only. If unable to insert the plug into the outlet, contact an electrician to arrange replacement of the obsolete outlet. Do not defeat the safety purpose of the grounding plug.
13.Lightning - For added protection during a lightning storm, or when this unit is left unattended and unused for long periods of time, unplug the unit from the wall outlet and disconnect the cable system. This will prevent damage to the unit due to lightning and power line surges.
2
For Indoor Product
1.Water and Moisture - Do not use this unit near water - for example, in a wet basement, in an unprotected outdoor installation, or in any area classified as a wet location.
2.Object and Liquid Entry - Never push objects of any kind into this unit through openings, as they may touch dangerous voltage points or short out parts that could result in a fire or electrical shock. Never spill liquid of any kind on the unit.
3.Power Cord and Power Cord Protection - For units intended to operate with 230VAC, 50Hz, the input and output power cord must comply with the latest versions of IEC Publication 227 or IEC Publication 245.
Power supply cords should be routed so they are not likely to be walked on or pinched. Pay particular attention to location of cords and plugs, convenience receptacles, and the point of exit from the appliance.
4.Overloading - Do not overload outlets and extension cords; this can result in a risk of fire or electrical shock.
For Outdoor Product
Power Lines - An outdoor system should not be located in the vicinity of overhead power lines, electric lights, or power circuits, or where it may contact such power lines or circuits. When installing an outdoor system, extreme care should be taken to keep from touching power lines or circuits, as this contact might be fatal. U.S.A. models only - refer to the National Electrical Code Article 820 regarding installation of CATV systems.
For Rack-mount Product
1.Ventilation - This unit should not be placed in a built-in installation or rack, unless proper ventilation is provided, or the manufacturer’s instructions have been adhered to. The equipment must not exceed its maximum operating temperature requirements.
2.Mechanical Loading - Mounting of the equipment in a rack shall be such that a hazardous condition is not achieved due to uneven mechanical loading.
|
|
WARNING: |
|
|
Electrostatic-sensitive device. Use |
|
|
proper CMOS/MOSFET handling |
|
ATTENTION |
precautions to avoid electrostatic |
|
OBSERVE PRECAUTIONS |
discharge. |
|
FOR HANDLING |
|
|
ELECTROSTATIC SENSITIVE |
|
|
DEVICES |
|
|
|
|
NOTE: Grounded wrist straps must be worn and proper ESD safety precautions observed when handling the electrostaticsensitive printed circuit boards.
CAUTION: Lithium Battery
Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. Dispose of used batteries according to the battery manufacturer’s instructions.
Safety Precautions
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This symbol indicates the presence of uninsulated “dangerous voltage” within the product’s enclosure. This may constitute a risk of electric shock.
The user should consult the operating and maintenance (servicing) instructions in the literature accompanying the appliance.
Attention: Installation should be performed by qualified service personnel only in accordance with the National Electrical Code or applicable local codes.
Power Disconnect. Units with or without ON-OFF switches have power supplied to the unit whenever the power cord is inserted into the power source; however, the unit is operational only when the ON-OFF switch is in the ON position. The power cord is the main power disconnect for all units.
3
FCC & ICES INFORMATION
(U.S.A. and Canadian Models Only)
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1)This device may not cause harmful interference, and
(2)This device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules and ICES-003 of Industry Canada. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses and radiates radio frequency energy, and if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his expense.
Intentional or unintentional changes or modifications, not expressly approved by the party responsible for compliance, shall not be made. Any such changes or modifications could void the user’s authority to operate the equipment. If necessary, the user should consult the dealer or an experienced radio/television technician for corrective action. The user may find the following booklet, prepared by the Federal Communications Commission, helpful: How to Identify and Resolve Radio-TV Interference Problems. This booklet is available from the U.S. Government Printing Office, Washington, DC 20402, Stock No. 004-000- 00345-4.
WARNING: This is a Class A product. In a domestic environment, this product may cause radio interference, in which case, the user may be required to take adequate measures.
Sécurité
ATTENTION : POUR ÉVITER TOUT RISQUE D'ÉLECTROCUTION,
N'ESSAYEZ PAS DE RETIRER LE CAPOT (OU LE PANNEAU
ARRIÈRE). CET APPAREIL NE CONTIENT AUCUN COMPOSANT
SUSCEPTIBLE D'ÊTRE RÉPARÉ PAR L'UTILISATEUR. CONFIEZ
LA RÉPARATION DE L'APPAREIL À DU PERSONNEL QUALIFIÉ.
Ce symbole signale que le produit renferme une « tension potentiellement dangereuse » non isolée susceptible de provoquer une électrocution.
Ce symbole invite l'utilisateur à consulter les instructions d'utilisation et d'entretien (dépannage) reprises dans la documentation qui accompagne l'appareil.
Attention : l'installation doit exclusivement être réalisée par du personnel qualifié, conformément au code national d'électricité américain (NEC) ou au code d'électricité local en vigueur.
Coupure de l'alimentation. Qu'ils soient pourvus ou non d'un commutateur ON/OFF, tous les appareils reçoivent de l'énergie une fois le cordon branché sur la source d'alimentation. Toutefois, l'appareil ne fonctionne réellement que lorsque
le commutateur est réglé sur ON. Le débranchement du cordon d'alimentation permet de couper l'alimentation des appareils.
Sicherheitshinweise
VORSICHT: UM EINEN ELEKTRISCHEN SCHLAG ZU
VERMEIDEN, IST DIE ABDECKUNG (ODER RÜCKSEITE) NICHT
ZU ENTFERNEN. ES BEFINDEN SICH KEINE TEILE IN DIESEM
BEREICH, DIE VOM BENUTZER GEWARTET WERDEN KÖNNEN.
LASSEN SIE WARTUNGSARBEITEN NUR VON QUALIFIZIERTEM
WARTUNGSPERSONAL AUSFÜHREN.
Das Symbol macht auf nicht isolierte „gefährliche Spannung" im Gehäuse aufmerksam. Dies kann zu einem elektrischen Schlag führen.
Der Benutzer sollte sich ausführlich über Anweisungen für die Bedienung und Instandhaltung (Wartung) in den begleitenden Unterlagen informieren.
Achtung! Die Installation sollte nur von qualifiziertem
Kundendienstpersonal gemäß jeweils zutreffender
Elektrovorschriften ausgeführt werden.
Unterbrechung des Netzanschlusses. Geräte mit oder ohne Netzschalter haben Spannung am Gerät anliegen, sobald der Netzstecker in die Steckdose gesteckt wird. Das Gerät ist jedoch nur betriebsbereit, wenn der Netzschalter (EIN/AUS) auf EIN steht. Wenn das Netzkabel aus der Steckdose gezogen wird, ist die Spannungszuführung zum Gerät vollkommen unterbrochen.
Precauciones de Seguridad
PRECAUCIÓN: PARA DISMINUIR EL RIESGO DE DESCARGA ELÉCTRICA, NO RETIRE LA CUBIERTA (NI LA PARTE POSTERIOR). NO EXISTEN PIEZAS DE RECAMBIO EN EL INTERIOR DEL EQUIPO. EL PERSONAL DE SERVICIO CUALIFICADO SE ENCARGA DE REALIZAR LAS REPARACIONES.
Este símbolo indica que existen puntos de tensión peligrosos sin aislamiento dentro de la cubierta de la unidad. Estos puntos pueden constituir un riesgo de descarga eléctrica.
El usuario debe consultar las instrucciones de funcionamiento y mantenimiento (reparación) en la documentación que se suministra con el aparato.
Atención: la instalación la debe realizar únicamente personal cualificado de conformidad con el National Electric Code o las normas aplicables en su país.
Desconexión de la alimentación. Las unidades con o sin interruptores de encendido/apagado reciben alimentación eléctrica siempre que el cable de alimentación esté conectado a la fuente de alimentación. Sin embargo, la unidad sólo funciona cuando el interruptor está en la posición de encendido. El cable de alimentación es la principal fuente de desconexión de todas las unidades.
4
Veiligheidsmaatregelen |
|
Medidas de Segurança |
|||||||||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
VOORZICHTIG: OPEN DE BEHUIZING OF DE ACHTERKANT VAN HET APPARAAT NIET. ZO VERMINDERT U HET RISICO OP ELEKTRISCHE SCHOKKEN. IN HET APPARAAT BEVINDEN ZICH GEEN ONDERDELEN DIE U ZELF KUNT REPAREREN. LAAT SERVICE EN ONDERHOUD UITVOEREN DOOR GEKWALIFICEERD PERSONEEL.
Dit symbool geeft aan dat er binnen in het apparaat ongeïsoleerde, gevaarlijke spanning aanwezig is die mogelijk elektrische schokken kan veroorzaken.
De gebruiker dient de bedieningsen onderhoudsvoorschriften te raadplegen in de documentatie die werd meegeleverd met het apparaat.
Attentie: het apparaat mag alleen door gekwalificeerd personeel worden geïnstalleerd. De installatie dient in overeenstemming met de nationale elektrische richtlijnen of de van toepassing zijnde lokale richtlijnen te worden uitgevoerd.
Spanning uitschakelen. Apparatuur met of zonder aan-uitschakelaar staat onder spanning zolang de stekker is aangesloten op de wandcontactdoos. De apparatuur is uitsluitend in werking als de aan-uitschakelaar aan staat. Het netsnoer is de "hoofdschakelaar" voor alle apparatuur.
CUIDADO: PARA REDUZIR O RISCO DE CHOQUE
ELÉCTRICO, NÃO RETIRE A TAMPA (OU A PARTE
POSTERIOR). NO INTERIOR, NÃO EXISTEM PEÇAS QUE
POSSAM SER REPARADAS PELO UTILIZADOR. REMETA A
ASSISTÊNCIA PARA OS TÉCNICOS QUALIFICADOS.
Este símbolo indica a presença de "tensão perigosa" não isolada dentro da estrutura do produto, o que pode constituir risco de choque eléctrico.
O utilizador deve consultar as instruções de funcionamento e manutenção (assistência) nos documentos que acompanham o aparelho.
Atenção: a instalação deve ser executada apenas por técnicos qualificados da assistência, de acordo com o código eléctrico nacional ou os códigos locais aplicáveis.
Corte de corrente. As unidades com ou sem interruptores ON-OFF (ligar/desligar) recebem corrente sempre que o fio de alimentação está introduzido na fonte de alimentação; contudo, a unidade apenas está operacional quando o interruptor ON-OFF está na posição ON. O fio de alimentação destina-se a desligar a corrente em todas as unidades.
Sicurezza |
|
Zasady Bezpieczeństwa |
|||||||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
ATTENZIONE: PER RIDURRE IL RISCHIO DI SCOSSE ELETTRICHE NON RIMUOVERE LA COPERTURA (O IL PANNELLO POSTERIORE). L'UNITÀ NON CONTIENE COMPONENTI INTERNI RIPARABILI DALL'UTENTE. PER QUALSIASI INTERVENTO, RIVOLGERSI A PERSONALE TECNICO QUALIFICATO.
Questo simbolo indica la presenza di "tensione pericolosa" non isolata all'interno del contenitore del prodotto. Ciò comporta un potenziale rischio di scosse elettriche.
Si consiglia di consultare le istruzioni operative e di manutenzione (interventi tecnici) contenute nella documentazione fornita con il dispositivo.
Attenzione: l'installazione deve essere effettuata esclusivamente da personale tecnico qualificato in conformità con il National Electrical Code o con le normative locali vigenti.
Scollegamento dell'alimentazione. Le unità dotate o sprovviste di interruttori ON-OFF vengono alimentate quando si inserisce il cavo nella presa dell'alimentazione. L'unità è tuttavia in funzione solo quando l'interruttore ON-OFF si trova nella posizione ON. Il cavo di alimentazione costituisce il dispositivo di scollegamento dell'alimentazione principale per tutte le unità.
PRZESTROGA: ABY ZMNIEJSZYĆ RYZYKO PORAŻENIA ELEKTRYCZNEGO, NIE NALEŻY ZDEJMOWAĆ POKRYWY GÓRNEJ (ani tylnej). WEWNĄTRZ URZĄDZENIA NIE MA ŻADNYCH ELEMENTÓW, KTÓRE MOGĄ BYĆ NAPRAWIANE SAMODZIELNIE PRZEZ UŻYTKOWNIKA. SERWIS NALEŻY ZLECAĆ WYKWALIFIKOWANYM PRACOWNIKOM OBSŁUGI.
Ten symbol wskazuje na obecność nieizolowanego „niebezpiecznego napięcia” we wnętrzu urządzenia. Napięcie to grozi porażeniem elektrycznym.
Użytkownik powinien zapoznać się z instrukcjami obsługi i |
konserwacji (serwisu), zamieszczonymi w dokumentacji |
towarzyszącej urządzeniu. |
Uwaga: Instalacja może być wykonywana wyłącznie przez wykwalifikowanych pracowników obsługi, zgodnie z zasadami kodeksu National Electrical Code lub innych obowiązujących norm.
Odłączanie zasilania Niezależnie od wyposażenia w wyłącznik zasilania, prąd do urządzenia jest doprowadzany zawsze, gdy przewód zasilania jest podłączony do źródła zasilania; jednak urządzenie działa tylko wtedy, gdy wyłącznik zasilania jest włączony. Przewód zasilania jest głównym wyłącznikiem zasilania we wszystkich urządzeniach.
5
TABLE OF CONTENTS |
|
|
SECTION 1: INTRODUCTION TO THE DVR1 SERIES DIGITAL VIDEO RECORDERS |
9 |
|
1.1 |
Guide to This Manual .............................................................................................................. |
9 |
1.2 |
Unpacking ................................................................................................................................ |
9 |
1.3 |
Understanding the DVR1 Series ................................................................................................ |
9 |
SECTION 2: INSTALLING THE DVR1 ...................................................................................... |
10 |
|
2.1 |
Mounting ................................................................................................................................ |
10 |
2.2 |
Connecting the DVR1 ............................................................................................................ |
10 |
SECTION 3: GUIDE TO THE DVR1 CONTROLS .................................................................. |
13 |
|
3.1 |
DVR1 Front Panel Controls .................................................................................................... |
13 |
3.2 |
DVR1 Front Panel Display ...................................................................................................... |
13 |
3.3 |
Navigating with the DVR1 Controls ...................................................................................... |
14 |
SECTION 4: DVR1 MAIN MENU PROGRAMMING .............................................................. |
15 |
|
4.1 |
Overview of the DVR1 Main Menu ........................................................................................ |
15 |
4.2 |
Setting the Time/Date ............................................................................................................ |
15 |
4.3 |
Configuring Alarms ................................................................................................................ |
15 |
4.4 |
Configuring Scheduled Recordings .......................................................................................... |
16 |
4.5 |
Configuring the Recording Parameters .................................................................................... |
16 |
4.6 |
Configuring On-screen Display Options ................................................................................ |
17 |
4.7 |
Managing Archive Storage ...................................................................................................... |
17 |
4.8 |
Accessing the Advanced Menu ................................................................................................ |
19 |
4.9 |
About DSR ............................................................................................................................ |
19 |
SECTION 5: DVR1 ADVANCED MENU PROGRAMMING .................................................... |
20 |
|
5.1 |
Overview of the DVR1 Advanced Menu ................................................................................ |
20 |
5.2 |
DVR1 Passwords .................................................................................................................... |
20 |
5.3 |
Overwriting the Hard Disk .................................................................................................... |
21 |
5.4 |
Erasing, Deleting, and Recovering Hard Disk Data ................................................................ |
21 |
5.5 |
Invoking Audio Recording ...................................................................................................... |
21 |
5.6 |
Using the Auto Delete Feature ................................................................................................ |
21 |
5.7 |
Configuring Communications ................................................................................................ |
22 |
5.8 |
Configuring the Multiplexer Format ...................................................................................... |
22 |
5.9 |
Adjusting Picture Qualities ...................................................................................................... |
22 |
5.10 |
Locking Out the Front Panel .................................................................................................. |
22 |
5.11 |
Restoring Factory Defaults ...................................................................................................... |
23 |
5.12 |
Changing the Password .......................................................................................................... |
23 |
SECTION 6: OPERATING THE DVR1 SERIES ........................................................................ |
24 |
|
6.1 |
Initial Startup .......................................................................................................................... |
24 |
6.2 |
Recording ................................................................................................................................ |
24 |
6.3 |
Playback .................................................................................................................................. |
25 |
6.4 |
The Search Interface ................................................................................................................ |
26 |
SECTION 7: ARCHIVING .......................................................................................................... |
27 |
|
7.1 |
Archiving Applications Explained .......................................................................................... |
27 |
6
7.1.1 |
Extended Archiving Applications .......................................................................................................... |
27 |
7.1.2 |
Backup Archiving Applications ............................................................................................................ |
27 |
7.1.3 |
Selective/Manual Archiving Applications .............................................................................................. |
27 |
7.2 |
Using CD-Writers .................................................................................................................. |
27 |
7.2.1 |
Minimuum Requirements .................................................................................................................... |
27 |
7.2.2 Connecting the CD Recorder ................................................................................................................ |
27 |
|
7.3 |
Creating a CD-ROM with Video Files .................................................................................... |
28 |
7.4 |
Limitations on CD Operations ................................................................................................ |
28 |
SECTION 8: SERVICE AND RETURNS .................................................................................... |
29 |
|
8.1 |
Maintenance ............................................................................................................................ |
29 |
8.2 |
Factory Service ........................................................................................................................ |
29 |
APPENDIX A: FACTORY DEFAULT SETTINGS ...................................................................... |
30 |
|
APPENDIX B: TECHNICAL SPECIFICATIONS ........................................................................ |
31 |
|
APPENDIX C: OBSERVATION SYSTEM QUICK INSTALL GUIDE ........................................ |
33 |
|
1.1 |
Introduction ............................................................................................................................ |
33 |
1.2 |
Required Software Version ...................................................................................................... |
33 |
1.3 |
Installation .............................................................................................................................. |
33 |
1.3.1 Connection of Audio/Video Cable (A/V cable) ...................................................................................... |
33 |
|
1.3.2 Connection of Alarm Contact .............................................................................................................. |
33 |
|
1.4 |
Programming the Observation System Monitor ...................................................................... |
34 |
1.5 |
Programming the DVR1 ........................................................................................................ |
34 |
1.6 |
Remote Viewing Considerations .............................................................................................. |
34 |
APPENDIX D: INSTALLATION GUIDE FOR THE COMBINED BOSCH MULTIPLEXER, |
|
|
|
INTUIKEY KEYBOARD & DVR1 SERIES SYSTEM ........................................ |
35 |
1.1 |
Overview ................................................................................................................................ |
35 |
1.2 |
Required Software Version ...................................................................................................... |
35 |
1.3 |
Installation .............................................................................................................................. |
35 |
1.4 |
DVR1 Keyboard Menus .......................................................................................................... |
36 |
1.4.1 |
DVR1 Controls Menu .......................................................................................................................... |
36 |
1.4.2 DVR1 Playback Controls Menu ............................................................................................................ |
37 |
|
APPENDIX E: RS-232 REMOTE PROTOCOL .......................................................................... |
38 |
|
1.1 |
Supported Command Sequences ............................................................................................ |
38 |
1.2 |
Setting the Clock .................................................................................................................... |
38 |
7
8
SECTION 1: INTRODUCTION TO THE
DVR1 SERIES DIGITAL VIDEO RECORDERS
1.1Guide to This Manual
This manual contains all of the information necessary to safely install, program, and operate Bosch DVR1 Series Digital Video Recorders. Step-by-step procedures and sample menus guide you through each phase of the DVR1’s setup and programming.
The DVR1 package includes the Remote Viewer software, which allows remote access to a DVR1 through a network interface. Complete installation and operation instructions for the Remote Viewer program are included in this manual.
1.2Unpacking
Unpack carefully. This is electronic equipment and should be handled with care to prevent damage to the unit. Check for the following items:
Digital Video Recorder unit
Installation Instructions (this manual)
Accessories PCB (printed circuit board)
One (1) 12-volt power supply with two (2) power cables
Rack mount kit
Wave Reader software (CD)
Wave Reader Manual
Wave Watch Manual
If any items appear to have been damaged in shipment, replace the item(s) properly in the shipping carton and notify the shipping company. If any items are missing, notify your nearest Bosch Security Systems, Inc. Sales Representative or Customer Service Representative:
The Americas: 1 800 326 3270
Europe & Middle East: 31 40 278 1222
Asia Pacific Region: 65 350 1859
NOTE: The shipping carton and all packing materials should be retained, in case transporting the unit is necessary. This will ensure safe transport of all components.
1.3Understanding the DVR1 Series
The DVR1 Series of Digital Video Recorders provide a digital alternative to traditional time-lapse VCRs. Digital video recording allows continuous recording on a hard disk, eliminating the need to replace or rewind videotapes. The DVR1 Series provide menu-based search capabilities for recorded events, as well as access to live or recorded data via the Ethernet.
Additionally, the DVR1 Series offer the following operating features:
•Single-channel composite or S-video input/output connections.
•Ample hard disk storage: 80GB for DVR1EP08; 160GB for DVR1EP16; 320GB for DVR1EP32 &
DVR1EP32A.
•Accepts a single camera or multiplexed inputs from most popular multiplexers.
•Multiple recording rates from 0.1 up to 60 pictures per second (pps; also referred to as images per second, or IPS).
•Two hard disk recording modes: continuous recording (overwrite mode) or no overwrite.
•Two recording quality modes: S-video or VHS.
•Compatibility with many archiving devices (see Section 4.7).
•Remote Viewer software allows remote viewing of live or recorded images on a PC, as well as many other features (see Wave Reader Manual [part # 3935 890 44511] & Wave Watch Manual [part # 3935 890 44711]).
NOTE: Refer to the Bosch Web site, www.boschsecuritysystems.com, for a listing of the latest approved external archiving devices.
9
|
|
|
|
|
|
|
|
SECTION 2: INSTALLING THE DVR1 |
|||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BOSCH |
|
|
BOSCH |
|
|
|
BOSCH |
|
|
|
|
|
|
BOSCH |
|
|
BOSCH |
|
|
|
|
Audio |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
(Optional) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Microphone |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
(Optional) |
|
|
CONSOLE |
VCR |
VCR |
|
|
|
|
|
|
|
|
|
9 |
10 |
|
|
|
|
|
|
|
SVHS IN |
|
MON B MON A |
1 |
2 |
3 |
4 |
5 |
6 |
7 |
8 |
|
13 |
14 |
15 |
16 |
|
||||
KEYBD |
|
|
IN |
OUT |
|
11 |
12 |
|
|||||||||||||
|
SVHS OUT |
SDA |
|
|
ALARM |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Multiplexer |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
ACCESSORIES |
RS232 |
|
AUDIO IN |
S-video IN |
VIDEO IN |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1 |
|
5 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
ETHERNET |
1 ALARM IN |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2 ALARM OUT |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
10/100 |
3 RECORD START IN |
6 |
9 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
4 ALARM RECORD RESET |
|
|
12VDC |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
5 VEXT PULSE OUT |
|
|
|
SCSI |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
6 ERROR OUT |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
7 GROUND |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
8 VIDEOLOSS OUT |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
9 DISK END OUT |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
AUDIO OUT S-video OUT VIDEO OUT |
|
||
|
|
DVR1 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
SCSI |
CD-writer |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
Keyboard |
|
|
|
Ethernet |
|
|
|
|
|
|
|
Network |
|
|||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
Figure 2A – Sample DVR1 System Installation
Figure 2A provides an illustration of a typical DVR1 system installation. Consider the peripheral devices necessary for your system application, and perform the system connections according to the following installation instructions.
2.1Mounting
The DVR1 is supplied as a desktop unit. If desired, your unit may be rack mounted using the rack mount kit (included with the unit). Ensure that the mounting/installation location provides adequate ventilation and protection from moisture. Do not obstruct the ventilation holes at the sides of the unit.
2.2Connecting the DVR1
Rear Panel Connections
1. Refer to Figure 2B for details on the input/output connections supplied by the DVR1.
|
|
|
3 |
5 |
6 |
8 |
10 |
|
|
|
ACCESSORIES |
RS-232 |
AUDIO IN |
S-video IN |
VIDEO IN |
|
|
1 |
5 |
|
|
|
|
|
1 ALARM IN |
|
|
|
|
|
|
ETHERNET |
2 ALARM OUT |
|
|
|
|
|
|
10/100 |
3 RECORD START IN |
6 |
9 |
|
|
|
|
4 ALARM RECORD RESET |
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
5 VEXT PULSE OUT |
|
12V DC |
SCSI |
|
|
|
|
6 ERROR OUT |
|
|
|
|
||
|
7 GROUND |
|
|
|
|
|
|
|
8 VIDEOLOSS OUT |
|
|
|
|
|
|
|
9 DISK END OUT |
|
|
|
|
|
|
|
|
|
|
|
AUDIO OUT |
S-video OUT |
VIDEO OUT |
|
|
|
|
|
|
||
1 |
|
|
2 |
4 |
7 |
9 |
11 |
1 . Ethernet Port: For viewing Live or Recorded Images on a PC via the Ethernet (network).
2.Power Connector: Connect 12 Volt DC external power supply (provided).
NOTE: Ensure that the site's AC Power is stable and within the rated voltage of the external power supply. If the site's AC power is likely to have spikes or power dips, use power line conditioning or an Uninterruptible Power Supply (UPS).
3.Accessory I/O Port: Used to connect peripheral devices such as alarm devices, alarm relays, or the VEXT (Video External Pulse) connection (see additional pertinent information, including pinout details, in this section).
4.SCSI Port: For connecting a SCSI compatible archive device.
5.RS-232 Serial Port: Serial port for Flash Upgrading of software. Also used for external control of unit.
NOTE: The RS-232 port does NOT work with a modem. Use a Null Modem type cable (Bosch S1385 cable) to connect to this port.
6.Audio In (specified version only): Unbalanced, RCA style jack.
7.Audio Out (specified version only): Unbalanced, RCA style jack.
8.S-video In: Y/C video input with 4-pin mini-DIN style connector.
9.S-video Out: Y/C video output with 4-pin mini-DIN style connector.
10.Video In: Composite video input with BNC style connector.
11 . Video Out: Composite video output with BNC style connector.
Figure 2B – DVR1 Rear Panel Connections
10
2.Connect all peripherals (e.g. cameras, monitors, etc.) to the corresponding inputs/outputs on the DVR1 rear panel.
CAUTION: DO NOT connect both S-video and Composite inputs at the same time. A hardware conflict will occur, which could damage the unit.
3.When all connections have been completed, apply power to the system.
S-Video
•Cable must be purchased separately.
4 |
3 |
Pin Signal |
||||||
GND (Y) |
||||||||
|
1. |
|||||||
|
|
|
|
|
2. |
GND (C) |
||
|
|
|
||||||
|
|
|
|
|
3. |
Y-signal IN or OUT |
||
|
|
|||||||
|
4. |
C-signal IN or OUT |
||||||
2 |
1 |
|
||||||
Ethernet Port
Ethernet port uses standard pinout configuration.
•For a DVR1 that connects directly to a Hub, use a straight-through connection.
•For a DVR1 that connects directly to a PC, use a crossover connection.
Accessories Port Connections
The rear panel of the DVR1 is equipped with an Accessories Port (DB-9 style connector). Connect the Accessories PCB (supplied with the unit) to the Accessories Port, then wire all accessories to the Accessories PCB.
ACCESSORIES |
|
1 |
5 |
6 |
9 |
If the Accessories PCB is lost or missing, contact Bosch Customer Service for a |
DB-9 Connector on |
|
replacement (Part Number 0900-0127a). |
||
Rear Panel |
||
|
As an alternative to using the PCB connector, you may purchase a female |
|
|
|
|
|
||||
DB-9 connector and perform wiring and connections as detailed in the |
|
|
|
|
|
||||
following pin-out. |
|
|
|
|
|
|
|
||
Pin 1: |
Alarm In |
Pin 6: |
Error Out |
|
|
|
|
|
|
Pin 2: |
Alarm Out |
Pin 7: |
Ground |
6 |
7 |
8 |
9 |
GND |
|
Pin 3: |
Record Start In |
Pin 8: |
Videoloss Out |
||||||
1 |
2 |
3 |
4 |
5 |
|||||
Pin 4: |
Alarm Record Reset |
Pin 9: |
Disk End Out |
|
|
|
|
|
|
Pin 5: |
(future feature) |
Pin 10: |
|
|
|
|
|
|
|
VEXT Pulse Out |
Ground |
|
|
|
|
|
|||
NOTE: Refer to the multiplexer and other peripheral device manuals for |
Accessories PCB |
|
|||||||
pertinent connection and synchronization information. |
|
||||||||
|
|
|
|
|
|||||
Functional descriptions of the connections provided by the DVR1 Accessories Port follow:
Alarm In: An alarm condition can be activated by an Active Low TTL input, or by relay contact devices such as pressure pads, passive infrareds, door switches, or similar devices
Input: Active Low TTL with pull-ups or Normally Open Relay.
High: 5 V (12 V tolerant) Low: Ground
Minimum Duration: 0.5 Seconds
Normally Open Relay Alarm Connection
Alarm Input |
Pin 1 |
|
Ground |
Pin 7 or 10 |
|
Accessories PCB |
||
|
|
|
Normally Open
(Closes During Alarm)
Typical Alarm Device
Refer to each alarm device's manual for specific wiring details.
11
Alarm Out: The Alarm Output is activated when a teletext alarm is read, or while the Alarm Input is active. The Alarm output is only active for the duration of the alarm event.
Input: Active Low
High: 12 V
Low: Ground
Current Out: 50 mA Max
Short Circuit Protected.
Low for duration of alarm
Record Start In: When activated, this connection places the unit in record mode. Compatible with the Disk End Out signal from a second unit.
Input: Active Low TTL with pull-ups or Normally Open Relay.
High: 5 V (12 V tolerant) Low: Ground
Minimum Duration: 0.5 Seconds
Alarm Record Reset: This feature is for future development and has not yet been implemented.
VEXT Pulse Out: The Video External Pulse Connection (VEXT) simplifies multiplexer operation by automatically synchronizing the multiplexer with the DVR1.
The DVR1 sends a VEXT pulse to the multiplexer, indicating that it is ready to record the next image. The multiplexer responds by sending the next image to the
Video Input on the DVR1.
The VEXT connection is especially beneficial for units configured with dual record speeds (Normal and Alarm).
NOTE: Use of the VEXT connection is highly recommended when connecting the unit to a multiplexer.
Error Out: The Error Out signal is activated when the unit experiences any operational or internal error.
Videoloss Out: The Videoloss Out signal is activated when the unit experiences loss of video on the selected video input (Composite or S-video).
In the event of loss of video, VIDEOLOSS will be indicated near the upper left-hand corner of the primary monitor.
Disk End Out: The Disk End Out is activated when there are 5 minutes of recording space left on the hard disk.
Output: Active Low
High: 5 V
Low: Ground (0.8 V Max)
Current Out: 50 mA Max
Short Circuit Protected.
Output: Open Collector
High: Transistor Off
Low: Transistor On
Active When On.
Current Out: 10 mA Max
Minimum Duration: 0.5 Seconds
12
Loading...