Bosch 600 User Manual

0 (0)
Video Recorder 600 Series
8/16 Ch. DVR
en Operations manual
Video Recorder 600 Series Operating instructions | en 2
90.0102 | 0.1v | 366.961.U10.Flaunam
ns
oitarepO smetsyS ytiruceS hcsoB
Operating instructions
limited by setting passwords.
Access to the units functions are determined by the user level of the user logged in.
Table 5.1 User Levels and permissions
Front panel controls
Figure 51 Front panel controls
Note:
8-channel models have only 8 camera keys on the front.
Function Administrator level Advanced User level Normal User level
View live Yes Yes Yes
Sequence Yes Yes Yes
Quad Yes Yes Yes
OSD Yes Yes Yes
Zoom Yes Yes Yes
Pan/Tilt/Zoom (PTZ) Yes Yes Yes
Playback Yes Yes No (configurable)
Search Yes Yes No (configurable)
Export Yes Yes No (configurable)
Acknowledge Alarm Yes Yes No (configurable)
oNoNseYsuneM metsyS
oNoNseYtrevoC
3 en | Operating instructions Video Recorder 600 Series
smetsyS ytiruceS hcsoBlaunam nsoitarepO90.0102 | 0.1v | 366.961.U10.F
Keys
The keys on the front panel control all functions. Symbols on the keys show the functions.
Inactive keys emit an audible beep when pressed.
Arrow keys:
Up, Down, Left, Right
move around through menu items or values when in menu mode
in PTZ mode, the arrow keys can be used to control the pan or tilt functions of the
selected camera
moves the visible area of the selected image in digital zoom mode
Enter key
selects a submenu or menu item, or confirms selections made in menus
brings up the cameo submenu in full screen or quad modes
Menu key
opens the system menu
Search key
press to open the date/time search menu to look for recorded images
Export key
press to open the export menu
PTZ key
enables or disables the PTZ mode
Zoom in key
PTZ zoom in key
Digital zoom in key on active full-screen display
Zoom out key
PTZ zoom out key
Digital zoom out key
Exit key
–p
ress to return to previous level or to exit the menu system
Acknowledge key
press to acknowledge an alarm event; a red indicator light is located on the key
Camera keys (1-8/16)
press to see a full-screen display of the video input
the LED will be illuminated when the camera is recording
the LED will flash during an alarm on the camera
Quad key
press to go to quad mode
in quad mode, press to toggle to full screen
Sequence key
view cameras in sequence on full-screen or quad displays
Video Recorder 600 Series Operating instructions | en 4
90.0102 | 0.1v | 366.961.U10.Flaunams noitarepO smetsyS ytiruceS hcsoB
Multi-screen key
press to go to different multi-screen modes
OSD key
press to view date/time and camera information, or date/time only
Pause key
press to freeze the picture
Reverse key
in live mode, press to start reverse playback of recordings for the displayed cameras
in playback mode, press to start or speed up reverse playback
in pause mode, press to step back one frame
Play key
in live mode, press to resume playback from the last selected playback position
in pause or fast forward/reverse modes, press to resume playback
Fast forward key
in live mode, press to start playback from one and a half minutes earlier
in playback mode, press to speed up the forward playback rate
in reverse playback mode, press to start forward playback
in pause mode, press to step forward one frame
Stop key
while in playback mode, press to return to live mode
Indicators
The indicators on the front panel display light or flash to alert of various operating conditions.
Power - lights green when the unit is powered
Network - lights green to indicate network activity
Alarm - flashes red when an alarm is detected
Record - lights red when the unit is recording video
5 en | Operating instructions Video Recorder 600 Series
smetsyS ytiruceS hcsoBlaunam nsoitarepO 90.0102 | 0.1v | 366.961.U10.F
Mouse Controls
All functions controlled by the front panel can, alternatively, be accessed using the supplied
USB mouse. All main DVR functions are accessible via the System Control Bar. To display the
panel (on monitor A), move the mouse pointer to the bottom left of the screen or press the
menu key. To close the System Control Bar press the exit key, or the left mouse
button.
Figure 2 System Control Bar
The buttons and indicators of the System Control Bar work the same as the keys and
indicators on the front panel.
The System Control Bar can also be controlled with the Arrow Keys and Enter Key.
Video Recorder 600 Series Operating instructions | en 6
90.0102 | 0.1v | 366.961.U10.Flaunam nsoitarepO smetsyS ytiruceS hcsoB
Remote control
All functions controlled by the front panel and USB mouse can, alternatively, be accessed
using the supplied remote control. The IR remote control allows control of up to nine units
without interfering with one another.
An ID number must be set on the remote control and in the system. See Section 6.6.7 System
for setting the system ID for the unit.
To set the ID on the remote control:
1. Press the ID button on the remote control.
2. Press a number between 1 and 9 that corresponds to the unit ID you wish to control.
Figure 3 Remote control
7 en | Operating instructions Video Recorder 600 Series
smetsyS ytiruceS hcsoBlaunams noitarepO 90.0102 | 0.1v | 366.961.U10.F
Viewing pictures
The unit has two monitor outputs, A and B. The way in which these monitors display pictures
depends on how the system is configured.
Monitor A
Monitor A is the main monitor. It shows full-screen, quad or multiscreen live or playback
camera pictures. Status messages, alarms, motion, and video loss warnings are also displayed
on this monitor. When the menu system is activated, it is displayed on this monitor. Monitor A
is the default monitor for keyboard and mouse commands.
Changing the full-screen display on Monitor A
To control the display on monitor A with mouse control:
1. Bring up the System Control Bar.
2. Click the Monitor A button.
3. From the pop-up menu, select the display for Monitor A
Select 1-8/16 for the corresponding Camera
Select the sequence key to sequence channels 1-8/16
Changing the quad display on Monitor A
To control the quad display on monitor A with mouse control:
1. Bring up the System Control Bar.
2. Click the Monitor A button.
3. From the pop-up menu, select the display for
Monitor A
Select the quad key to select the quad mode
Select the sequence key to sequence the quad mode
Monitor B
Monitor B displays full-screen, quad or multiscreen (with or without sequence) of live
pictures. When an alarm or motion input is detected, the camera picture with the Alarm/
Motion indicator can be displayed on monitor B. When multiple alarms or motion occur,
camera pictures are sequenced on monitor B.
Changing the full-screen display on Monitor B
To control the display on monitor B with mouse control:
1. Bring up the System Control Bar.
2. Click the Monitor B button.
3. From the pop-up menu, select the display for Monitor B
Select 1-8/16 for the corresponding Camera
Select the sequence key to sequence channels 1-8/16
Changing the quad display on Monitor B
To control the quad display on monitor B with mouse control:
1. Bring up the System Control Bar.
2. Click the Monitor B button.
3. From the pop-up menu, select the display for Monitor B
Select the quad key to select the quad mode
–Se
lect the sequence key to sequence the quad mode
Loading...
+ 16 hidden pages