INSTRUMENT CLUSTER SIA RESET
Model: E38,E39,E46,E52,E53
Production Date: E46 from 9/99
E38,E39,E53 from 9/00
On 2001 vehicles without the diagnostic connector in the engine compartment, the use of the SIA reset tool is not possible. The service indicator may be reset using the reset mode in the instrument cluster.
|
1 |
|
|
|
|
|
|
2 |
|
|
40 |
120 |
1 |
|
6 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
140 |
|
|
7 |
|
|
|
|
|
|
40 20 15 |
10 |
0 |
|
TURN THE KEY TO |
PRESS |
|
|
|
|
P |
! |
||
|
|
|
|
ABS |
||||
LEFT |
|
|
|
|
|
|
|
POSITION 1 (KL R) |
|
|
|
|
|
|
|
|
|
KEEP PRESSED FOR |
|
|
|
|
|
|
||
5 |
AFTER |
|
|
|
|
|
|
|
KEY |
IS |
|
|
|
|
|
|
|
ON. |
|
RESET |
SIA: -919 L |
|
|
|||
TAP |
BUTTON |
Service interval reset: high cluster |
|
|||||
TO |
|
|
|
|
|
|
||
RESET |
. |
|
|
|
|
|
|
|
Reset procedure for high and low clusters with SIA III using the Reset Mode:
•Ignition key must be “off”
•Press and hold the trip odometer reset button in the instrument cluster (left button), and turn the ignition key to the first position.
•Keep the button pressed for approximately 5 seconds until one of the following words appear in the display: “OIL SERVICE, or “INSPECTION”, with “RESET”.
The service due is shown with “reset” if the coded minimum consumption limit has been reached and resetting is possible. If “reset” is not shown, the minimum limit has not been reached and resetting is not possible.
•Press and hold the reset button again until the word “RESET” begins to flash.
Loading...