BMW 125, 120, 118, 116 User Manual

0 (0)
Contents
Owner's Handbook for Vehicle
A-Z
The Ultimate Driving
Machine
THE BMW 1 SERIES.
THE BMW 1 SERIES.
OWNER'S HANDBOOK.
OWNER'S HANDBOOK.
116i 118i 125i
116d
116ed
118d 120d 125d
Owner's Handbook for Vehicle
Congratulations on your choice of a BMW. The better you are acquainted with your car, the easier you will
find it is to handle. We would therefore like to offer you the following advice:
Please read the Owner's Handbook before setting out in your new BMW. Also use the integrated Owner's Handbook in your vehicle. It contains important notes on how to operate the car, enabling you to derive maximum benefit from the technical advantages of your BMW. It also contains useful information which will help you to uphold both your BMW's operating safety and its full resale value.
Updates to the printed or integrated Owner's Handbook after go‐ ing to press are located as needed in the appendix to the printed quick reference to the vehicle.
Supplementary information is provided in the other documents of on-board literature.
We wish you a safe and enjoyable journey, BMW AG
© 2012 Bayerische Motoren Werke Aktiengesellschaft Munich, Germany Not to be reproduced, wholly or in part, without written permission from BMW AG, Munich. English II/12, 03 12 490 Printed on environmentally friendly paper, bleached without chlorine, suitable for recycling.
Contents
For quick access to a particular topic or item, please consult the detailed alphabetical index, see page 294.
6 Notes
Overview
10 Cockpit 14 iDrive 21 Voice control system 24 Integrated Owner’s Handbook in the
vehicle
Controls
28 Opening and closing 42 Adjusting 52 Carrying children in safety 57 Driving 67 Displays 83 Lights 90 Security 98 Driving stability control systems 103 Driving comfort 116 Climate 122 Interior equipment 126 Storage compartments
Driving hints
132 Driving precautions 135 Loads 137 Towing a trailer 142 Saving fuel
Entertainment
168 Sound 170 Radio 176 CD/multimedia
Communication
200 Telephone 210 Office 219 Contacts 222 ConnectedDrive 231 Extended BMW Online services
Mobility
234 Refuelling 236 Fuel 238 Wheels and tyres 246 Engine compartment 248 Engine oil 251 Coolant 252 Maintenance 255 Replacing parts 265 Help in the event of a breakdown 271 General care
Reference
278 Technical data 286 Short commands of the voice control
system
294 From A to Z
Navigation
148 Navigation system
Notes
Notes
About this Owner’s Handbook
The quickest access to a particular topic or item is by consulting the alphabetical index.
The first chapter is recommended for an initial overview of the vehicle.
Updates after going to press
Updates to the Owner's Handbook after going to press are found in the appendix of the printed quick reference to the vehicle.
Additional sources of information
Should you require any further information, please contact your Service centre, who will be pleased to advise you.
Information on BMW, for example on technol‐ ogy, on the Internet: www.bmw.com
Symbols
Indicates precautions that must be followed precisely in order to avoid the possibility of per‐ sonal injury and serious damage to the vehicle.
◄ Marks the end of a specific item of informa‐ tion.
"..." Identifies texts on the control display for se‐ lecting functions.
›...‹ Identifies commands for the voice control system.
»...« Identifies replies by the voice control sys‐ tem.
Refers to measures that can be taken to help protect the environment.
Symbol for components and assemblies
Recommends that you study the relevant section of this Owner's Handbook in connection with a particular part or assembly.
Vehicle Equipment
This Owner's Handbook describes all models and all standard, national and special equipment provided in the model series. This Owner's Handbook therefore also describes and illus‐ trates equipment not present in your vehicle, for example due to selected special equipment and national version.
That also applies to safety-relevant functions and systems.
If certain equipment and models are not descri‐ bed in this Owner's Handbook, refer to the Sup‐ plementary Owner's Handbooks provided.
In right-hand drive vehicles, some of the control functions are arranged differently from those shown in the illustrations.
Built-date
The 'built-date' of your vehicle is indicated un‐ derneath the door post on the driver's door.
The ‘built-date’ is defined as ‘the calendar month and the calendar year in which the body shell and the powertrain subassemblies are con‐ joined and the vehicle is driven or moved from the production line’.
Status of the Owner's Handbook
The high level of safety and quality of vehicles is ensured by continuous enhancement. In rare in‐
6
Notes
stances, your car may therefore differ from the information supplied here.
For Australia/New Zealand
When reading this Owner's Handbook, please bear the following in mind: to ensure that our vehicles continue to embody the highest quality and safety standards, we pursue a policy of con‐ tinuous, ongoing development. Because modi‐ fications in the design of both vehicles and ac‐ cessories may be introduced at any time, your own vehicle's equipment may vary from that de‐ scribed in this manual. For the same reason, it is also impossible to guarantee that all descrip‐ tions will be completely accurate in all respects.
We must therefore request your understanding of the fact that the manufacturer of your vehicle is unable to recognise legal claims based on dis‐ crepancies between the data, illustrations and descriptions in this Owner's Handbook and your own vehicle's equipment. Please note, too, that some of the optional equipment described in this manual is not available on Australian models due to restrictions imposed by Australian De‐ sign Rules and other requirements.
Should you require any further information, please contact your Service centre, who will be pleased to advise you.
Updates after going to press
Updates to the Owner's Handbook after going to press are found in the appendix of the printed quick reference to the vehicle.
Your own safety
Your vehicle is configured for the operating con‐ ditions and registration requirements of your country. If the vehicle is to be operated in an‐ other country, your vehicle must be adapted to any prevailing different operating conditions and permit requirements. Information on possi‐ ble exclusion of warranty or warranty restrictions for your vehicle can be obtained from your Serv‐ ice centre.
Maintenance and repair
The advanced technology behind this car, for example the use of modern materials and high­performance electronics, means that adapted methods of maintenance and repair are re‐ quired.
Always have the corresponding work performed either by a BMW Service centre or by a work‐ shop that operates to BMW specifications and has suitably trained personnel.
If such work is performed inexpertly, it could re‐ sult in consequential damage and thus consti‐ tute a safety risk.
Parts and accessories
BMW recommends using parts and accessory products that are specifically approved for this purpose by BMW.
You are recommended to consult a BMW Serv‐ ice centre for advice on genuine BMW parts and accessories, other BMW approved products and competent advice on all related matters.
The safety and compatibility of these products in conjunction with BMW vehicles have been checked by BMW.
BMW accepts product liability for them. BMW cannot accept liability for parts or accessory products of any kind which it has not approved.
BMW is unable to assess each individual prod‐ uct of outside origin as to its suitability for use on BMW vehicles without safety risk. Nor can suitability be assured if an official permit has been issued for it in a specific country. Tests performed for such permits cannot always cover all operating conditions for BMW vehicles, and some of them therefore are insufficient.
7

Overview

This summary of buttons, switches and displays
serves as an initial guide.
In addition, it gives you an insight into the
principles behind the various ways in which
functions can be performed.
Overview Cockpit

Cockpit

Vehicle Equipment

This chapter describes all standard, national and special equipment provided in the model series.

Around the steering wheel

Therefore equipment not available in a vehicle is also described, for example the selected special equipment or national version. That also applies to safety-relevant functions and systems.
1 Safety switch for window in rear passenger
compartment  40
2 Power windows  38 3 Exterior mirror operation  49 4 Glove box on the driver's side  126
Driver assistance systems
Forward alert  103
Lane departure warning  95
5 Lights
10
Front fog lights  87
Rear fog lights  87
Side lights  83
Low-beam headlights  83
Cockpit Overview
Automatic driving lights con‐ trol  84
Daytime driving lights  84 Adaptive Headlights  85 High-beam assistance  85 Instrument lighting  88
Headlight beam throw adjust‐ ment  85
6 Steering-column lever, left
Turn indicator  61
High-beam headlights, headlight flasher  61
High-beam assistance  85
Parking lights  84
On-board computer  78
7 Buttons on steering wheel, left
Speed limit  96
Cruise control on/off, inter‐ rupt  105
Paddle for Cruise Control  106
8 Instrument cluster  67 9 Buttons on steering wheel, right
Entertainment source
Volume control
Voice control  21
Telephone  200
Knurled wheel for selection lists  77
10 Start/stop engine and switch igni‐
tion on/off  58
Auto Start Stop function  59
11 Steering-column lever, right
Windscreen wipers  62
Rain sensor  62
Set speed  104
Resume speed  106
12 Horn 13 Steering wheel adjustment  51 14 Unlock bonnet  246
Cleaning the windows and head‐ lights  63
Rear wipers  63
11
Overview Cockpit

Around the centre console

1 Roof lining  13 2 Control display  14 3 Glove box  126 4 Air outlets  120 5 Hazard warning flashers  265
Central locking system  31
6 Radio  170
CD/multimedia  176
7 Climate  116
8 Controller with buttons  14 9 Parking brake  60 10 Park Distance Control,
PDC  106 Rear view camera  109 Park assistant  112
11 Drive experience switch  99
Dynamic Stability Control, DSC  98
12 Gear selector lever   64  64
12

Around the headlining

Cockpit Overview
1 Emergency call  265
2 Glass roof  40
3 Front passenger airbag indicator
lamp  92
4 Reading lights  88
5 Interior light  88
13
Overview iDrive

iDrive

Vehicle Equipment

This chapter describes all standard, national and special equipment provided in the model series. Therefore equipment not available in a vehicle is also described, for example the selected special equipment or national version. That also applies to safety-relevant functions and systems.

Principle

iDrive integrates the functions of a large number of switches. These functions can thus be con‐ trolled from one central point.
Operate iDrive while the vehicle is in mo‐ tion
Only make adjustments if the traffic conditions are appropriate. Otherwise, you may become distracted and endanger the vehicle occupants and other road users.◀

Overview of controls

Control functions
Control display
Notes
To clean the control display, comply with the
information regarding care.
To avoid risk of damage to the control dis‐
play, please do not place objects in front of it.
Switching off
1. Press the button.
2. "Switch off control display"
Switch on
Press the controller to switch on.
1 Control display 2 Controller with buttons
The buttons can be used to call up menus directly. The controller can be used to select menu items and make settings.
14
Controller with navigation system
Select menu items and making settings.
Turning.
1.
iDrive Overview
2. Pressing.
3. Tilting in four directions.
Buttons on the controller
Press the button Function
MENU Call up the main menu.
Turning
1.
2. Pressing
3. Tilting in four directions.
RADIO Calls up the Radio menu.
MEDIA Calls up the CD/multimedia
menu.
NAV Calls up the Navigation
menu.
TEL Calls up the Telephone
menu.
BACK Displays the previous
screen.
OPTION Calls up the Options menu.
Controller without navigation system
Select menu items and making settings.
Buttons on the controller
Press the button Function
MENU Call up the main menu.
AUDIO Calls up last heard audio
menu, change between au‐ dio menus.
TEL Calls up the Telephone
menu.
15
Overview iDrive
Press the button Function
BACK Call up previous table.
OPTION Calls up the Options menu.

Operating principle

Calling up the main menu
Press the button.
The main menu is displayed. All iDrive functions can be called up via the main
menu.
Menu items in the Owner’s Handbook
In this Owner's Handbook, the menu items that are to be selected are shown in quotation marks, for example "Settings".
Switching between screens
After a menu item has been selected, for exam‐ ple "Radio", a new screen is displayed. Screens can lie one on top of the other.
Tilt the controller to the left.
The current screen is closed and the previ‐ ous screen is displayed.
Pressing the BACK button reopens the pre‐ vious screen. The current screen is not closed.
Tilt the controller to the right.
A new screen is opened and overlaid.
Selecting a menu item
Menu items in white can be selected by high‐ lighting them.
Turn the controller until the desired menu
1.
item is highlighted.
2. Press the controller.
16
White arrows to the left or right indicate that other screens can be called up.
View of an opened menu
In general, when a menu is called up, the screen that was last selected in this menu is displayed. To display the first screen of the menu:
Tilt the controller repeatedly to the left until
the first screen is displayed.
Press the menu button on the controller
twice.
Calling up the Options menu
Press the button.
The "Options" menu is displayed.
Alternatively, tilt the controller repeatedly to the right until the "Options" menu is displayed.
Options menu
The "Options" menu consists of various areas:
Screen settings, for example "Split screen".
Area remains unchanged.
Operating options for the selected main
menu, for example for "Radio".
If applicable, other operating options for the
selected main menu, for example "Save station".
Adjusting the settings
Select a field.
1.
2. Turn the controller until the desired setting
is displayed.
iDrive Overview
Function is disabled.

Example: setting the clock

Setting the clock
1. Press the button. The main menu is
displayed.
2. Turn the controller until "Settings" is high‐
lighted and press the controller.
3. If necessary, tilt the controller to the left to
display "Time/Date".
4. Turn the controller until "Time/Date" is high‐
lighted and press the controller.
3. Press the controller.
Enabling/disabling functions
Some menu items are preceded by a checkbox. This indicates whether the function is enabled or disabled. Selecting the menu item enables or disables the function.
Function is enabled.
17
Overview iDrive
5. Turn the controller until "Time:" is highligh‐
ted and press the controller.
6. Turn the controller to set the hour and press
the controller.
7. Turn the controller to set the minutes and
press the controller.

Status information

Status field
The following items of information are displayed in the status field on the top right:
TimeCurrent entertainment source.Sound output on/off.Reception level of mobile telephone net‐
work.
Phone status.Reception of traffic reports.
Symbols in the status field
The symbols are combined in the following groups.
Symbols for radio
Symbol Meaning
TP Traffic Information switched on.
Symbols for telephone
Symbol Meaning
Incoming or outgoing call.
Missed call.
Reception level of mobile telephone
network symbol flashes: network search.
No mobile phone network available.
Bluetooth switched on.
Data transfer active.
Roaming active.
Text message received.
SIM card check.
SIM card disabled.
SIM card not found.
PIN required.
Symbols for entertainment
Symbol Meaning
CD/DVD player.
Music collection
Gracenote® database.
AUX-IN port
USB audio interface/Audio interface,
mobile phone
USB audio interface.
Audio interface for mobile phone.
18
iDrive Overview
Other functions
Symbol Meaning
Spoken instructions switched off.

Split screen

General
In the split screen view, additional information can be displayed on the right-hand side of the screen, for example information from the on­board computer.
This information remains visible in the split screen view even if a switch is made to another menu.
Switching the split screen view on and off
1.
2. "Split screen"
Selecting display
1.
2. "Split screen"
3. Tilt the controller until the split screen is se‐
4. Press the controller or select "Split screen
5. Select the desired menu item.
Press the button.
Press the button.
lected.
display"

Favourites buttons

General
iDrive functions can be saved on the favourites buttons and called up directly, for example radio stations, navigation destinations, telephone numbers and shortcuts into the menu.
The settings are saved for the remote control currently in use.
Without navigation system and telephone
On the buttons, only the radio transmitter, see page 174, can be stored.
Saving a function
Highlight the function using the iDrive.
1.
2. Press the desired button for longer
than 2 seconds.
Performing a function
Press the button.
The function is carried out immediately. If you have selected a telephone number, for ex‐ ample, the connection will also be established.
Displaying assignment of buttons
Touch the buttons with your finger. Do not wear gloves or use objects.
The assignment of the buttons is displayed at the top edge of the screen.
19
Overview iDrive
To display brief information: touch the but‐
ton.
To display detailed information: touch the
button for longer.
Clearing assignment of buttons
1. Press buttons 1 and 8 simultaneously for
approximately five seconds.
2. "OK"

Entering letters and digits

General
Turn controller and select letters or digits.
1.
2. If applicable, select other letters or digits.
3. Select "OK" to confirm the input.
Symbol Function
Press the controller: deletes a letter
or digit.
Press and hold down the controller:
deletes all numbers or letters.
Entry comparison
Input of names and addresses: the selection is gradually narrowed down and possibly supple‐ mented with every subsequent letter that you enter.
Inputs are continuously compared with the data saved in the vehicle.
Only letters that are present in the data are
offered for entry.
Destination search: place names can be en‐
tered in the writing of any language available on the control display.
Enters a space.
Change between upper/lower case, numbers and symbols
Depending on the menu, you can switch be‐ tween the input of lower case or upper case let‐ ters, numbers and symbols:
Symbol Function
Enter letters.
Enter digits.
or Tilt the controller up.
Without navigation system
Select the symbol.
20

Voice control system

Voice control system Overview

Vehicle Equipment

This chapter describes all standard, national and special equipment provided in the model series. Therefore equipment not available in a vehicle is also described, for example the selected special equipment or national version. That also applies to safety-relevant functions and systems.

Principle

Through the voice control system most
functions shown in the Control Display can be operated by spoken commands. The system supports spoken input.
Functions that can only be used when the
vehicle is stationary cannot be operated via the voice control system.
The system has a special microphone on the
driver's side.
›...‹ Identifies commands for the voice con‐
trol system in the Owner's Handbook.

Requirements

On the control display set a language that is also supported by the voice control system, so that the vehicle can identify spoken commands.
Setting the language, see page 81.

Issuing voice commands

Activating the voice control system
The command is shown in the instrument cluster.
Symbol in the instrument cluster indicates
that the voice control system is active. If no further spoken commands are possible,
switch to iDrive to control the function in this case.
Switching off the voice control system
Press the button on the steering wheel or say ›Cancel‹.

Possible commands

Most of the menu items on the control display can be called up by means of spoken com‐ mands.
The possible commands depend on which menu is currently displayed on the Control Dis‐ play.
There are commands for the functions of the main menu.
Several list entries, for example, telephone book entries, can also be selected using the voice control system. When doing this, list entries are to be spoken exactly as they are shown in the relevant list.
Having possible commands read aloud
Possible commands can be read aloud: ›Voice commands‹
If, for example, the menu "Settings" is displayed, the commands for the settings are announced.
1.
2. Wait for acoustic signal.
3. Issue the command.
Press the button on the steering
wheel.
Running functions using short commands
Main menu functions can be performed imme‐ diately using short commands, almost irrespec‐
21
Overview Voice control system
tive of which menu item is selected, for exam‐ ple ›Vehicle status‹.
List of Short commands of the voice control sys‐ tem, see page 286.
Help dialogue to voice entry system
Call up help dialogue: ›Help‹ Further commands for help dialogue:
›Help with examples‹: information on the
current possible operations and the most important commands for this are read out.
›Help with voice input‹: information on the
operating principle of the voice entry system is read out.

Example: playing a CD

If necessary, switch on entertainment audio
1.
output.
2. Press the button on the steering
wheel.
3. ›C D and multimedia‹
The last medium played is played.
4. ›C D track ...‹, for example CD track 4.

Setting the speech dialogue

You can set whether the system uses the stand‐ ard dialogue or the short variant,
With the short variants of the speech dialogue, the system announcements are played in short‐ ened form.
On the control display:
"Settings"
1.
2. "Language/Units"
3. "Speech mode:"
4. Select the setting.

Adjusting volume

Turn the volume knob during the voice instruc‐ tions until the desired volume is obtained.
The volume is retained even if you change
the volume of other audio sources.
The volume is saved for the remote control
currently in use.

Information regarding emergency calls

The voice control system should not be used for emergency calls. Under stress, the spoken lan‐ guage and voice pitch can change, which could unnecessarily delay the connection of your call.
Instead, use the SOS button, see page 265, in the area of the interior mirror.

Operating conditions

Commands, digits and letters should be
pronounced fluently, with the usual empha‐ sis, and at a normal volume and speed.
Always speak the commands in the lan‐
guage of the voice control system.
When selecting a radio station, use the
standard pronunciation of the station name:
22
›Station ...‹ for example, Classic Radio sta‐ tion
Doors, windows and the glass roof should be
kept closed to avoid noise interference.
Avoid background noises in the car while
you are speaking.
Voice control system Overview
23
Overview Integrated Owner’s Handbook in the vehicle

Integrated Owner’s Handbook in the vehicle

Vehicle Equipment

This chapter describes all standard, national and special equipment provided in the model series. Therefore equipment not available in a vehicle is also described, for example the selected special equipment or national version. That also applies to safety-relevant functions and systems.

Integrated Owner’s Handbook in the vehicle

The integrated Owner's Handbook can be shown in the control display. It particularly de‐ scribes the equipment and functions present in the vehicle.
Components of the integrated Owner's Handbook
The integrated Owner's Handbook consists of three parts, which provide various information depths or access possibilities.
Quick Reference
Important information is found in the quick ref‐ erence for the operation of the vehicle, the op‐ eration of fundamental vehicle functions or in case of breakdown. This information can also be displayed when driving.
Search by pictures
Using the search by pictures, information and descriptions can be searched using pictures. For example, that is particularly helpful when the description of a piece of equipment is needed, which cannot be named.
Owner's Handbook
Here, information and descriptions can be searched via the index by directly entering a search term.
Select components
1. Press the button.
2. Turn the controller and select "Vehicle
information".
3. Press the controller.
4. Select desired area:"Quick reference""Search by pictures""Owner's Handbook"
Browsing within the Owner’s Handbook
Page by page with link access
Turn the controller until the next or previous page is displayed.
Page by page without link access
Browse the pages directly, skipping links. Highlight the symbol once. Then simply press
the controller to browse from page to page.
24
Integrated Owner’s Handbook in the vehicle Overview
Browse back.
Browse forward.
Context-sensitive help - Owner's Handbook for the currently selected function
Suitable information can be displayed directly.
Call-up when operating via iDrive
Switch to the Options menu directly from the application on the control display:
1.
2. "Show Owner's Handbook"
Press the button or tilt the controller repeatedly to the right until the "Options" menu appears.
Calling up with display of a Check Control message
Directly from the Check Control message on the control display:
"Show Owner's Handbook"
Switching between function and Owner’s Handbook
You can use the control display to switch from a function, for example radio, to the Owner's Handbook, and then back and forth between the two displays:
4. Press the button again to switch back
to the last displayed function.
5. Press the button again to switch back
to the last displayed page of the Owner’s Handbook.
To switch continuously between the last dis‐ played function and the last displayed page of the Owner’s Handbook, repeat steps 4 and 5. As you do so, new screens are opened.
Favourites buttons
General
The Owner's Handbook can be stored in the fa‐ vourite buttons and called up directly.
Saving
Select "Owner's Handbook" using the
1.
iDrive.
2. Hold down the desired button for
longer than two seconds.
Use
Press the button. The Owner's Handbook is displayed
immediately.
1.
2. "Show Owner's Handbook"
3. Select the desired page in the Owner’s
Press the button or tilt the controller repeatedly to the right until the "Options" menu appears.
Handbook.
25

Controls

This chapter enables you to operate your car with
greater ease, explaining in detail the features
designed to make your journey safer, more
comfortable and more enjoyable.
Controls Opening and closing

Opening and closing

Vehicle Equipment

This chapter describes all standard, national and special equipment provided in the model series. Therefore equipment not available in a vehicle is also described, for example the selected special equipment or national version. That also applies to safety-relevant functions and systems.

Remote control/keys

Buttons on the remote control
1 Unlocking 2 Locking 3 Opening the tailgate
General
The delivery specification includes two remote controls with keys.
Every remote control contains a replaceable battery.
The settings called up and implemented when the car is unlocked depend on which remote control is used to unlock the car. See Personal Profile, see page 29.
Information regarding service requirements is also saved in the remote control. See Service data in the remote control, see page 252.
Integrated key
Press the button on the back of the remote con‐ trol, arrow 1, and pull out the key, arrow 2.
The integrated key fits in the driver's door lock.
Replacing the battery
Remove the integrated key from the remote
1.
control.
2. Push in catch with the key, arrow 1.
3. Remove the cover for the battery compart‐
ment, arrow 2.
4. Insert a new battery of the same type with
the positive side facing upwards.
5. Press the cover back into position.
Dispose of the old battery at an author‐ ised collecting point or hand it in to a Service centre.
28
Opening and closing Controls
New remote controls
New remote controls can be obtained from your Service Centre.
Loss of remote controls
A lost remote control can be blocked by the Service Centre.
Emergency detection of the remote control
The ignition can be switched on or the engine started even in one of the following situations:
Interference in the radio transmission to the
remote control from external sources.
Flat battery in the remote control.Fault in radio transmission due to mobile
radio device in the immediate vicinity of the
remote control.
Fault in radio transmission due to the
charger when charging in the vehicle, for ex‐
ample, for mobile radio devices. If an attempt is made to switch on the ignition or
start the engine, a Check Control message is displayed.
Starting the engine in the event of emergency detection of the remote control
Gearbox Hold the corresponding check control message of the remote control, as illustrated, to marking of the steering column and press the start/stop button within 10 seconds with the clutch depressed.

Personal Profile

Principle
Personal profile principle
Some functions of the vehicle can be adjusted to individual needs.
Settings are saved automatically in the cur‐
rently activated profile.
When you unlock the vehicle, the last profile
used with the remote control is recognised and called up.
Personal settings are also found and called
up if the vehicle has been driven in the mean‐ time by other persons with their own remote controls.
Individual settings for three personal profiles and a guest profile are stored.
Transferring settings
The personal settings can be taken to another vehicle with the Personal Profile function. More detailed information is available from your Serv‐ ice centre.
The transfer takes place:
Via the USB interface in the glove box or the
centre console on a USB medium.
Via BMW Online.
Automatic gearbox: Hold the corresponding check control message of the remote control, as illustrated, to marking of the steering column and press the start/stop button within 10 sec‐ onds with the brake depressed.
Profile management
Calling up profiles
Independently of the remote control that is used, another profile can be called up.
"Settings"
1.
29
Controls Opening and closing
2. "Profiles"
3. Select a profile.
The profile called up is assigned to the remote control currently used.
Renaming profiles
"Settings"
1.
2. "Profiles"
The current profile is selected.
3. Call up "Options".
4. "Rename current profile"
Resetting profiles
Settings of the active profile are reset to factory settings.
Switch on ignition.
1.
2. "Settings"
3. "Profiles"
The current profile is selected.
4. Call up "Options".
5. "Reset current profile"
Importing profiles
Existing settings and contacts are overwritten with the imported profile.
1. "Settings"
2. "Profiles"
3. "Import profile"
4. BMW Online: "BMW Online"
USB interface: "USB device"
Exporting profiles
Most settings of the active profile and the saved contacts can be exported.
This can be beneficial for safeguarding and re‐ calling personal settings, for example if items are accidentally moved or deleted.
"Settings"
1.
2. "Profiles"
3. "Export profile"
4. BMW Online: "BMW Online":
USB interface: "USB device"
Using a guest profile
With the guest profile, individual settings can be made without affecting the three personal pro‐ files.
This can be beneficial if a driver without their own profile uses the vehicle temporarily.
"Settings"
1.
2. "Profiles"
3. The current profile is selected.
30
Loading...
+ 274 hidden pages