Size:
509.4 Kb
Download

MODEL RE-42

Electric Series Oven

OPTIONS AND ACCESSORIES

(AT ADDITIONAL CHARGE)

Roll-In with pan racks

RPR-20, with center divider and 10 racks

Racks for pan rack L9

Electric Options

Single phase wiring (208/240 volt)

2 speed motor (208/240 volt)

Electric buzzer with mechanical timer (each)

Conventional Rack-type Options

Stainless steel center divider

Rack guides (set of 2)

Racks (each)

6" (152mm) stainless steel legs

Transport cart option (CTRE)

Roll-In with dolly basket (DBRI-L)

Project

 

 

 

-RE

Item No.

 

42

Quantity

 

 

Does not include rack, rack supports and center divider. Rolling equipment

 

must be selected from Available Options List.

 

All data is shown per oven section, unless otherwise indicated.

 

EXTERIOR CONSTRUCTION

Stainless steel front, back, top, and sides

One set of independent interlocking doors.

Heavy chrome plated tubular steel door handle

Vitreous fiber insulation at top, back, sides, bottom and doors.

INTERIOR CONSTRUCTION

29" x 41" x 28-1/4" (737mm x 1041mm x 718mm) oven compartment interior .

Porcelain-enameled steel baking compartment liner

OPERATION

2 sets of 3 tubular-type heaters

Direct acting snap - action thermostats

Slide vent - each section

2-1/3 HP blower motor operation, single speed

STANDARD FEATURES

Two 60 minute timers

Two year oven parts and one year labor warranty*

Five year limited door warranty*

*For all international markets, contact your local distributor.

BLODGETT OVEN COMPANY www.blodgett.com

44 Lakeside Avenue, Burlington, VT 05401

Toll Free: (800) 331-5842 • Phone: (802) 860-3700 • Fax: (802) 864-0183

MODEL RE-42

APPROVAL/STAMP

TOP VIEW

35-3/16”

 

ELECTRICAL

SIDE VIEW

(894mm)

 

ENTRANCE

 

 

 

ELECTRICAL

 

 

 

 

CONNECTION

6-5/8” (168mm)

 

 

3-5/8”

 

 

 

 

 

 

45-1/4”

(92mm)

 

 

 

(1149mm)

 

 

 

 

12-11/16”

ELECTRICAL

ELECTRICAL

 

 

ENTRANCE &

 

 

CONNECTION

40-5/8”

 

(322mm)

 

WIREWAY

 

 

(1032mm)

 

 

 

 

 

 

58-1/4”

 

 

 

 

 

 

 

(1140mm)

 

 

2-5/8”

17-1/4”

 

 

7-3/16”

(438mm)

 

 

(67mm)

 

 

 

 

12-9/16”

(183mm)

 

 

 

 

 

 

(319mm)

 

FRONT VIEW

35-3/16” (894mm)

SHORT FORM SPECIFICATIONS

Provide Blodgett roll-in convection oven model RE-42. Construction shall be stainless steel front, top, back, sides and legs, and shall be fully insulated. Oven shall be supported by 6" adjustable stainless steel legs. Doors shall be counterbalanced French style with chrome plated tubular steel handles. Baking compartment shall be lined with porcelain-enamel steel. Unit shall be electrically heated by two (2) sets of three (3) tubular heaters, each set controlled by independent snap-action thermostat and 60-minute timer. Air in baking chambers to be circulated by two (2) (one/two) speed blower motors. Provide with transport cart and two year parts and one year labor warranty. Provide with options and accessories as indicated.

DIMENSIONS:

Floor space:

35" (889mm ) W x 45" (1143mm) D

Motor

 

Single Speed (standard):

Two, 1/3hp (1725rpm)

Two Speed (optional):

Two, 1/3hp (1140 and1725rpm)

Clearance below oven:

7" (183mm)

Overall Dimensions:

35" (889mm ) W x 45" (1143mm) D x 65" (1651mm) H

 

(including legs and control panel)

ELECTRICAL RATING:

V.A.C.

Phase

K.W.H.

Amperes (L1-L2-L3)

208

1

21

101-0-101

208

3

21

58-56-57

220-240

1

21

89-0-89

220-240

3

21

51-53-51

MINIMUM ENTRY CLEARANCE:

Uncrated

35-3/16" (894mm)

Crated

40-1/2" (1029mm)

SHIPPING INFORMATION:

Approx. Weight:

 

Oven only

700 lbs. (317kg)

With transport cart

760 lbs. (345kg)

Crate sizes:

 

40-1/2" (1029mm) x 54" (1372mm) x 63" (1600mm)

Ovens can be phase loaded during hook-up to balance electric input. 50Hz ovens for use on 380 & 415 VAC 4 wire systems are available.

NOTE: The company reserves the right to make substitutions of components without prior notice

BLODGETT OVEN COMPANY www.blodgett.com

44 Lakeside Avenue, Burlington, VT 05401

Toll Free: (800) 331-5842 • Phone: (802) 860-3700 • Fax: (802) 864-0183

Printed in U.S.A.

NOTE: FOR COMMERCIAL USE ONLY

P/N 35014 Rev E (12/03)