Blodgett MT3240E-G User Manual

505.23 Kb
Loading...

MODEL MT3240E/G

Gas/Electric Conveyor Oven

OPTIONS AND ACCESSORIES

(AT ADDITIONAL CHARGE)

ν15" (381mm) shelf extension

ν20" (508mm) shelf extension

νTwin belt - two 16" (406mm) wide belts

νStainless steel interior

ν10' (3.0M) cord with receptacle (gas model only) (w/remote control only)

ν48" (1219mm) flexible gas hose with quick disconnect and restraining device

ν36" (914mm) flexible gas hose with quick disconnect and restraining device

Note: Two 48" (1219mm) and one 36" (914mm) hose on triple model

νOne year additional extended warranty*

Project

 

 

 

MT3240E/G

Item No.

 

 

Quantity

 

 

Blodgett conveyor oven with 32" (813mm) wide belt and 40" (1016mm)

 

baking zone length. Single, double or triple stack models are available.

 

All data is shown per oven section, unless otherwise indicated.

 

EXTERIOR CONSTRUCTION

νStainless steel front, top and sides

νAluminized steel back and bottom

νFront loading solid stainless steel door and handle

ν1-1/2" (38.1mm) Vitreous fiber insulation at bottom, back and top

νCeramic fiber insulation at blower installation

INTERIOR CONSTRUCTION

νAluminized steel nozzles and bottom surface

νAluminized steel air flow plates at top

ν32" (813mm) stainless steel wire mesh conveyor belt

νTwo single inlet blowers above the combustion or heater area for air circulation

OPERATION

νHeat transferred through forced air convection

νOpen vented baking compartment

νElectronic spark ignition control system (gas model)

νGas power type burner has mixer with adjustable shutter and sight window (gas model)

νInternal gas pressure regulator (gas model)

νTubular resistance heat (electric model)

νIntegral or remote microprocessor based controls with solid state 600°F (315.5°C) maximum thermostat and belt speed control with digital display

νTwo blower motors (1/8 HP minimum) with thermal overload protectors

νFour blower area cooling fans

STANDARD FEATURES

ν Control options: (must specify)

θ computerized end mounted

θ computerized remote

ν Belt direction: (must specify)

 

θ left to right

θ right to left

 

ν23-1/2" (595mm) black legs with casters - for single model

ν17-1/2" (445mm) black legs with casters - for double model

νTriple stack base with casters - for triple model

νProduct stops

νOven start-up*

νOne year parts & labor warranty*

*For all international markets, contact your local distributor.

BLODGETT OVEN COMPANY

50 Lakeside Avenue, Burlington, VT 05402

Toll Free: (800) 331-5842 • Phone: (802) 860-3700 • Fax: (802) 864-0183

+ 1 hidden pages