Blodgett MT1820E, CONVEYOR OVEN MT1820E User Manual

709.75 Kb
Loading...

MT1820E

CONVEYOR OVEN

REPLACEMENT PARTS LIST

EFFECTIVE MARCH 12, 2001

BLODGETT OVEN COMPANY, 50 Lakeside Avenue, Burlington, Vermont 05401 USA

Telephone: (802) 860-3700 (800) 331-5842 Fax: (802) 860-3732 www.blodgett.com

Superseding All Previous Parts Lists.

The Company reserves the right to make substitution in the event that items specified are not available.

ERRORS: Descriptive and/or typographic errors are subject to correction.

www.blodgett.com

IMPORTANT: When ordering parts, please provide the model, gas type and serial number of the oven. The identification plate is located on the left side of the combustion compartment and, also, above the control panel under the ledge.

þASAP Distributor Required Stocking Parts

tDoors Are Not Returnable

2

MT1820E

March 12, 2001

ELECTRICAL COMPONENTS

Ref. Part

No. No. Description

1þ M7389 Timer, Solid State (Qty 1)

2þ M5442 Control, Temperature (Qty 1)

3þ M6811 Control, Minarik Closed Loop (Qty 1)

(for Gearmotor)

4þ 30857 Probe, Temperature RTD 500 Ohms (Qty 1) M7252 Bracket, EGO Probe (Qty 1)

5þ M5446 Potentiometer, Control (Qty 1)

6þ M6087 Knob, Low Profile (Qty 1)

7M5447 Indicator Lamp, 250V (Qty 1)

8þ 30465 Switch, Rocker DPDT Black (Qty 1)

9þ M3295 Thermostat, High Limit (Qty 1) þ M4988 Fuse, 5 AMP, 300V, SC-5 (Qty 2)

10þ M0158 Fuse Holder (Qty 2)

11þ M9559 Element Assy, 208V, 1 PH (Qty 1)

11 þ M9560

Element Assy, 240V, 1 PH (Qty 1)

11M9561 Element Assy, 230V, 1 PH (Qty 1)

M8576 Voltage Conversion Kit (208 to 240V)

M8577 Voltage Conversion Kit (240 to 208V)

12þ M5765 Relay, Heat Sink Assy. (Qty 1)

13þ M6899 Transformer, 208/240V to 24V (Qty 1) M3299 Bracket, Thermal Switch (Qty 1)

14þ M2453 Snap Disc, L140-20F, 3 Pole (Qty 1)

(Blower Compartment)

15 þ M6044 Snap Disc, L110-20F, 3 Pole (Qty 1)

(Control Compartment)

16M0593 Terminal Block, 2 Pole (Qty 3)

17M10336 Terminal Block to Din Rail Conv Kit

Replaces 11204 this oven only

18þ 23034 Axial Fan, 106 CFM, 230V 4" (Qty 5)

1922718 Guard, Axial Fan (Qty 3)

M10434 Cord Set Assy., 40 AMP, 250V (Qty 1)

4888 Lug, Grounding (Qty 1)

20M7265 Connector, Liquid Tight (Qty 1)

19634 Contactor, Mercury, 3Pole, 30AMP

M9478 Conversion Kit, SS Relay to Merc. Contactor

18651 Contactor, Mercury, 2 Pole, 60AMP

M3831 Harness, Elements to Contactor

CONVECTION COMPONENTS

Ref. Part

No. No. Description

28þ M7233 Motor, Blower Assy., CW, 50/60 HZ (Qty 2) M7577 Insulation Kit, Blower (Qty 1)

29M7961 Air Plate, Upper (Qty 1)

30M7960 Air Plate, Lower (Qty 1)

CONVEYOR COMPONENTS

Ref.

Part

 

No.

No.

Description

21

M6337

Belt, Wire S/S 18" (Per Foot)

 

 

(Total Length 9 FT)

22þ M7994 Motor, Gear w/ Encoder (Qty 1) Motor Only M7995 Cable, Encoder (for Motor M7994)

(with molex connector at each end)

23M7043 Conveyor Assy. (Qty 1)

M4815 Shaft, Drive (Qty 1)

M4816 Shaft, Idle (Qty 1)

24M4817 Bearing, Rulon (Qty 4)

M4818 Sprocket, Wire Belt (Qty 10)

25M7495 Pulley, Timing 1/5 P 3/8 Wide Motor

 

 

(Sprocket) (Qty 1) (15 Tooth)

26

þ M5425

Pulley, Timing 1/5 P 3/8 Wide Conveyor

 

 

(Sprocket) (Qty 1) (30 Tooth)

27

þ M5423

Belt, Timing (Qty 1) (Marked "200XL")

FOR OVENS MANUFACTURED BEFORE 04/01/96 & UP TO SERIAL NUMBER 040196GC038S

Ref. Part

No. No. Description

M0200 Knob, Lock Phenolic, Black (Qty 2)

þM6087 Knob, Low Profile (Qty 1)

M8209 Motor, Gear w/ Encoder Replacement Kit **See Note

þM7994 Motor, Gear w/Encoder (Qty 1) Motor only

**See note

NOTE: Part number M8209 is needed only to convert from old style (M7126-no longer available). After you've converted this motor, you will only need to order part number M7994.

M7995 Cable, Encoder (for Motor M7994) (with molex connector at each end)

M4954 Control Cover Assy. w/ Access Door (Qty 1)

M6035 Latch, Access Door (Qty 1)

M5424 Pulley, Timing 1/5 P 3/8 Wide (Sprocket) (Qty 1) (12 Tooth)

.

+ 3 hidden pages