Blodgett BLT-G User Manual

463.92 Kb
Loading...

BLT-G

GAS FLOOR MODEL BRAISING PAN WITH

MANUAL TILT

INSTALLATION – OPERATION – MAINTENANCE

BLODGETT OVEN COMPANY

www.blodgett.com

44 Lakeside Avenue, Burlington, Vermont 05401 USA Telephone: (802) 658-6600 Fax: (802) 864-0183

1

S00071 Rev A (5/04)

IMPORTANT NOTES FOR INSTALLATION AND OPERATION

It is recommended that this manual be read thoroughly and that all instructions be followed carefully. This manual should be retained for future reference.

This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.

FOR YOUR SAFETY: Do not store or use gasoline or other flammable vapors or liquids in the vicinity of this or any other appliance.

WARNING: Improper installation, operation, adjustment, alteration, service or maintenance can cause property damage, injury or death. Read the installation, operating and maintenance instructions thoroughly before installing, operating or servicing this equipment.

WARNING: Instructions to be followed the event that the operator of this appliance smells gas must be posted in a prominent location. This information shall be obtained by consulting the local gas supplier.

WARNING: In the event you smell gas, shut down equipment at the main shut off valve and contact the local gas company or gas supplier for service.

Do not attempt to operate this unit in the event of a power failure.

Keep the appliance area free and clear from combustibles.

Do not obstruct the flow of combustion and ventilation air.

Adequate clearances must be maintained for servicing and proper operation.

NOTICE: Contact the factory, the factory representative or local service company to perform maintenance and repairs.

2

 

TABLE OF CONTENTS

 

DESCRIPTION

PAGE

Important Notes for Installation and Operation ..............................................................

2

Service Connections .....................................................................................................

4

1.0

Installation Instructions ...........................................................................................

5

2.0

Operating Instructions ............................................................................................

9

3.0

Cooking Guidelines .............................................................................................

11

4.0

Cleaning ..............................................................................................................

15

5.0

Maintenance .........................................................................................................

15

6.0

Troubleshooting ....................................................................................................

16

3

SERVICE CONNECTIONS

Supply gas through 1/2" pipe . A gas shut-off valve must be installed in supply piping convenient and adjacent to appliance. Electrical Connection, unless otherwise specified 120 Volts, 60 Hz, 1 PH. furnished with 3 prong plug and cord. Less than 2 amperes.

DIMENSIONS

MODEL

BTU

CAPACITY

UNITS

A

B

C

D

E

F

G

H

 

 

 

 

 

 

 

 

 

 

 

 

BLT-30G

80,000

30 gallons

inches

49.5

37.25

33.5

24

43.13

37.25

10.5

74.25

114 litres

mm

1257

959

851

610

1095

946

267

1886

 

 

BLT-40G

100,000

40 gallons

inches

58.5

38.88

43.5

24

51.75

37.25

10.5

74.25

152 litres

mm

1486

988

1105

610

1314

946

267

1886

 

 

MODEL

 

 

GAS SUPPLY

 

 

 

 

 

 

 

 

BTU/HR.

kW/HR.

SUPPLY PIPE PRESSURE (W.C.)

 

BLT-30G

80,000

23.4

Natural

 

Propane

 

 

 

 

BLT-40G

100,000

29.3

7"-14" (178-356mm)

 

11"-14" (279-356mm)

 

 

 

 

 

 

 

 

 

A

 

 

 

3.25 [83]

 

 

 

4.75 [121]

[1022]

B

22 [559]

2.12 [54]

40.25

 

 

 

C

9.75 [248]

 

REAR FLANGED FOOT DETAIL

 

4 EQUALLY SPACED

 

Ø7/16" [11mm] HOLES

 

ON 3 [76] B.C.

D [997]

 

39.25

SHOWN WITH OPTIONAL FAUCET

 

9.38 [238]

 

H

 

 

17 [432]

20.75 [527] 36 [914] F

G

 

E

 

 

22 [559]

DIMENSIONS ARE IN INCHES [MM]

POUR PATH

21 [533]

12 [305]

 

 

 

4

1.0 INSTALLATION INSTRUCTIONS

INSTALLATION CODES AND STANDARDS

Installation must conform with local codes, or in the absence of local codes, with the

National Fuel Gas Code, ANSI Z223.1/NFPA 54, or the Natural Gas and Propane Installation Code, CSA B149.1, as applicable.

1.The appliance and its individual shut off valve must be disconnected from the gas supply piping system during any pressure testing of that system at pressures in excess of ½ psi (3.5 kPa).

2.The appliance must be isolated from the gas supply piping system by closing its individual manual shut off valve during any pressure testing of the gas supply piping system at test pressures equal to or less than ½ psi (3.5 kPa).

Electrical grounding must be provided in accordance with local codes, or in the absence of local codes, with the National Electrical Code, ANSI/NFPA 70, or the Canadian Electrical Code, CSA C22.2, as applicable.

FLUE CONNECTIONS

Do not obstruct the flow of flue gases from the flue duct located on the rear of the gas fired tilting skillet. It is recommended that the flue gases be ventilated to the outside of the building through a ventilation system installed by qualified personnel.

Information on the construction and installation of ventilating hoods may be obtained from the standard for “Vapor Removal from Cooking Equipment”, NFPA No. 96 (latest edition), available from the National Fire Protection Association, Batterymarch Park, Quincy, MA, U.S.A. 02269.

UNPACKING

Immediately after unpacking, check for possible shipping damage. If the gas fired tilting skillet is found to be damaged, save the packaging material and contact the carrier within 15 days of delivery.

Before installing, verify that the type of gas supply (natural or propane) and electrical service agree with the specifications on the rating plate located on the left side console as you face the front of the appliance. If the supply and equipment requirements do not agree, contact your dealer immediately.

5

+ 11 hidden pages