Blaupunkt ST. LOUIS 7, ST. LOUIS C33 User Manual

Radio / Cassette

St. Louis C33	7 642 183 110
	(FM/MW/LW/DMS)

Operating instructions

http://www.blaupunkt.com

Open here

Ouvrir s.v.p.

2

1

2

3

4

5

6

7

8

9

ENGLISH FRANÇAIS ESPAÑOL PORTUGUÊS

14

13

12

11

10

3

CONTROLS

1 button to release the control panel

2 Button to switch the unit on/off

3Volume control

4 Cassette eject

5 Cassette compartment

6 FR button, fast tape winding

7FF button, fast tape winding

8Arrow buttons

MENU button, to open the basic settings menu

9SOURCE button, to select the CC, radio and CD changer sources

:AUDIO button, to adjust the bass, treble, balance and fader settings (Balance und Fader)

;Short press: EQ button, to select the sound presets

Long press: X-BASS, X-Bass function

<Keys 1 - 6

=Short press: BAND button, to select the FM memory bank and the AM (MW/LW) waveband, source selection to radio mode

Long press: TS, to start the Travelstore function.

> button, to display the time

4

CONTENTS

Notes and accessories ............	6
Road safety .....................................	6
Installation .......................................	6
Accessories ....................................	6
Removable control panel .........	7
Theft protection ...............................	7
Detaching the control panel .............	7
Attaching the control panel ..............	7
Switching on/off ......................	8
Adjusting the volume ...............	8
Setting the power-on volume ...........	8
Instantaneously reducing
the volume (mute) ............................	8
Mute while telephoning ....................	9
Radio mode ..............................	9
Switching to radio mode ..................	9
Selecting the frequency band /
memory bank...................................	9
Tuning into a station .......................	10
Setting the sensitivity of station
seek tuning ....................................	10
Storing station presets...................	10
Storing stations automatically
(Travelstore) ..................................	10
Listening to station presets ............	10
Cassette mode .......................	11
Cassette playback .........................	11
Switching over the playing
side of the tape .............................	11
Fast tape winding ..........................	11
Cassette eject ...............................	11

CD changer mode ..................	12
Switching to CD changer mode .....	12
Selecting CDs ...............................	12
Selecting tracks ............................	12
Fast track selection .......................	12
Fast searching (audible) ................	12
Repeating individual tracks or
whole CDs (REPEAT) ....................	12
Random track play (MIX) ...............	13
Scanning all tracks on all CDs
(SCAN) .........................................	13
Pausing playback (PAUSE) ............	13
Clock - Time ...........................	14
Displaying the time ........................	14
Setting the clock ...........................	14
Selecting 12/24-hour clock mode ..	14
Displaying the time when the unit
is off and the ignition is on .............	14
Sound and volume
distribution settings ...............	15
Adjusting the bass .........................	15
Adjusting the treble .......................	15
Adjusting the balance settings .......	15
Adjusting the fader settings ...........	15
Equalizer and X-BASS ...........	16
X-BASS ........................................	16
Selecting preset sound effect ........	16
Specifications ........................	17
Amplifier ........................................	17
Tuner .............................................	17
CC................................................	17
Installation instructions ..........	32

ENGLISH FRANÇAIS ESPAÑOL PORTUGUÊS

5

NOTES AND ACCESSORIES

Thank you for deciding to use a Blaupunkt product. We hope you enjoy using this new piece of equipment.

Please read these operating instructions before using the equipment for the first time. The Blaupunkt editors are constantly working on making the operating instructions clearer and easier to understand. However, if you still have any questions on how to operate the equipment, please contact your dealer or the telephone hotline for your country. You will find the hotline telephone numbers printed at the back of this booklet.

Road safety

Road safety has absolute priority. Only operate your radio unit if the road and traffic conditions allow you to do so. Familiarize yourself with the unit before setting off on your journey.

You should always be able to hear police, fire and ambulance sirens from far. For this reason, set the volume of the program you are listening to at a reasonable level.

Installation

If you want to install your car radio by yourself, please read the installation and connection instructions that follow these operating instructions.

Accessories

Only use accessories approved by Blaupunkt.

Amplifier

All Blaupunkt and Velocity amplifiers can be used.

CD changer

The Blaupunkt CD changer CDC A 01 (7607 700 022) can be connected to the St. Louis C33 unit.

6

REMOVABLE CONTROL PANEL

Removable control panel

Theft protection

As a way of protecting your equipment against theft, the unit is equipped with a detachable control panel (release panel). Without this control panel, the car radio is worthless to a thief.

Protect your equipment against theft by taking the control panel with you every time you leave your vehicle. Do not leave the control panel in your vehicle - not even in a hiding place.

The control panel has been designed to be easily use.

Note:

●Never drop the control panel.

●Never expose the control panel to direct sunlight or other heat sources.

●Avoid making direct skin contact with the control panel’s contacts. If necessary, clean the contacts with a lint-free cloth and some alcohol.

Detaching the control panel

1

Press the button 1.

The control panel locking mechanism opens.

First, pull the control panel straight off the unit and then out towards the left.

●The unit switches off after the control panel is removed.

●All current settings of the radio are saved.

●CD already inserted in the unit remains there.

Attaching the control panel

Slide the control panel from left to right into the unit’s guide.

Press the left-hand edge of the control panel into the unit until it clicks into place.

Note:

●When attaching the control panel, make sure you do not press on the display.

If the unit was still switched on when you removed the control panel, the unit will automatically switch back on with the last settings activated i.e. radio, CC or CD changer when the panel is reinserted.

ENGLISH FRANÇAIS ESPAÑOL PORTUGUÊS

7

SWITCHING ON/OFF

ADJUSTING THE VOLUME

Switching on/off

There are various ways of switching the unit on/off:

Switching on/off using the vehicle ignition

If the unit is correctly connected to the vehicle’s ignition and it was not switched off using button 2, it will switch on/off simultaneously with the ignition.

Switching on/off using the removable control panel

Remove the control panel. The unit switches off.

Attach the control panel again.

The unit switches on. The last settings i.e. radio, CC or CD changer will be reactivated.

Switching on/off using button 2

To switch the unit on, press button

2.

The unit can only be switched on when the ignition is turned on.

To switch the unit off, press button 2for longer than two seconds.

The unit switches off.

Adjusting the volume

The system volume can be adjusted in steps from 0 (off) to 100 (maximum).

To increase the system volume,

turn the volume control 3clockwise.

To decrease the volume,

turn the volume control 3anticlockwise.

Setting the power-on volume

You can set the unit’s default power-on volume.

Press the MENU button 8.

Keep pressing the or button 8until “ON VOL” appears in the display.

Set the power-on volume using the and buttons 8.

To help you adjusting the volume more easily, the volume will be increased / decreased as you make your changes.

When you have finished making your changes,

press the MENU button 8twice.

Instantaneously reducing the volume (mute)

You can instantaneously reduce the volume (mute) to a level preset by you.

Briefly press button 2.

“MUTE” appears in the display.

8

ADJUSTING THE VOLUME

RADIO MODE

Setting the mute level

You can set the unit’s mute volume level.

Press the MENU button 8.

Keep pressing the or button 8until “MUTE LVL” appears in the display.

Set the mute level using the and

buttons 8.

When you have finished making your changes,

Radio mode

Switching to radio mode

If you are in CC or CD changer mode,

keep pressing the SOURCE 9 button until the radio mode appears in the display together with the memory bank and frequency.

Selecting the frequency band / memory bank

	press the MENU button 8twice.	This unit can receive programs broad-
		cast over the FM and AM (MW/LW) fre-
	Mute while telephoning	quency band. There are three preset
	If your unit is connected to a mobile tele-	memory bank for the FM range and one
		for the AM range. Six stations can be
	phone, the car radio’s volume will be
		stored on each memory bank.
	muted as soon as you “pick up” the tele-
	phone. “TEL CALL” flashes in the dis-	Selecting the FM memory bank
	play.	To switch between the FM memory bank
	This requires to the mobile telephone	FM1, FM2 and FMT,
	be connected to the car radio as de-	press the BAND/TS button =.
	scribed in the installation instructions.	Selecting the AM (MW/LW)
	The volume will be reduced to the con-
		waveband
	figured mute volume level.
		To select the AM (MW/LW) waveband,
		keep pressing the BAND/TS button
		=until AM (MW/LW) appears in
		the display.

ENGLISH FRANÇAIS ESPAÑOL PORTUGUÊS

9

RADIO MODE

Tuning into a station	Storing station presets

There are various ways of tuning to a station.

Automatic seek tuning

Press the or button 8.

The unit tunes to the next receivable station.

Setting the sensitivity of station seek tuning

You can choose whether to tune only to strong reception stations or to also tune to those with a weak reception.

Press the MENU button 8.

Keep pressing the or button 8until “SENS HI” or “SENS LO” appears in the display

“SENS HI” means that the tuner is set high to sensitivity. “SENS LO” means it is set to the low sensitivity setting. If “SENS LO” is selected, “LOC” lights up in the display.

Set the required sensitivity using the and buttons 8.

When you have finished making your changes,

press the MENU button 8.

Tuning into stations manually

You can also tune into stations manually.

Press the or button 8.

Storing stations manually

Select the required memory bank (FM1, FM2 or FMT) or the AM (MW/LW) waveband.

Tune into the station.

Press one of the station buttons 1-6 <for longer than one second to store the station in that preset memory.

Storing stations automatically (Travelstore)

You can automatically store the six stations with the strongest reception in the region. The stations are stored in the FMT or AM (MW/LW) memory depending on the selected frequency band.

Note:

●Any stations that were previously stored on this memory bank are deleted in the process.

Press and hold the BAND/TS button =until seek tuning begins.

The station storing procedure begins. Once the procedure finishes, all the stored stations are played briefly.

Listening to station presets

Select the memory bank on which the station was stored.

Press the preset station button 1-6 <of the station you want to listen to.

10