Blaupunkt Mnchen RDM 169 User Manual

0 (0)

Radio / CD

München RDM 169 US

Operating instructions

		19
14	15	18
		2
		20
	1	21
	1

17 16

Contents
Condensed instructions ................	4
Remote control RC 08 .................	11
Important ......................................	12
Read the following before using
the unit ..................................................	12
Traffic safety .........................................	12
Installation .............................................	12
Telephone mute ....................................	12
Accessories ..........................................	12
Guarantee .............................................	12
International hotline ..............................	12
KeyCard anti-theft protection
system ...........................................	13
Switching on the unit ............................	13
Removing the KeyCard ........................	13
Teaching in a second KeyCard/
replacing a KeyCard .............................	13
Displaying the radio passport data .......	14
Visual display for anti-theft
protection ..............................................	14
Care of the KeyCard .............................	14
KeyCard lost/damaged .........................	14
Teaching in the new KeyCard ..............	14
Input errors ........................................	14
Selecting the operating mode ....	15
Enhancing display legibility .......	15

Radio operation with RDS ...........	16
Activating/deactivating RDS .................	16
AF - alternative frequency ....................	16
Selecting the frequency band ...............	16
Station tuning ........................................	17
Paging through the transmission chains
(FM only) ...............................................	17
Changing the memory level (FM) .........	17
Storing stations .....................................	17
Automatically saving the strongest
station with Travelstore ........................	18
Calling up stored stations .....................	18
Sampling stored stations with
Preset Scan ..........................................	18
Sampling stations with Radio Scan ......	19
Changing the sampling time (Scan) .....	19
Changing the sensitivity of the
seek run ................................................	19
Toggling between stereo and mono
(FM) ......................................................	19
Automatic bandwidth switching
(SHARX) ...............................................	19
PTY – Program Type ............................	20
Program type ........................................	20
CD mode/CD changer mode .......	22
Inserting a CD .......................................	22
Removing the CD .................................	22
Activating CD mode ..............................	22
Activating changer mode ......................	22
Selecting the display type .....................	23
Selecting CD and track .........................	23

Repeating a track/CD ...........................	23
TPM (Track Program Memory) .............	23
MIX ........................................................	24
Selecting MIX functions ....................	24
SCAN ....................................................	25
Assigning names to CDs ......................	25
Deleting the CD name/TPM store using
DSC-UPDATE ......................................	25
Clock - Time ..................................	26
Setting the time .....................................	26
Displaying the time ...............................	26
Correcting the time following an
interruption to the power supply ...........	26
Deactivating hours adjustment .............	26
Equalizer setting ..........................	27
Adjustment instructions ........................	27
Adjusting the frequency level ............	27
Selecting a quality factor for the
bass or mid-range .............................	28
Selecting the preset sound setting 28
Tips on adjusting the equalizer .........	29
Programming with DSC ...............	30
Overview of the factory default settings
with DSC ...............................................	32
Technical data ..............................	32
Glossary of technical terms .......	33
Installation and
connection instructions ............	135

PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH DEUTSCH

Condensed instructions

1Disengaging the fold-down control panel

Disengage the control panel to insert or remove the KeyCard and CD.

To disengage the control panel, press knob 1: the control panel folds down. The control panel cannot be removed, nor should it be used a shelf.

To re-engage the control panel, push it back into its original position (Arrow 3).

For safety reasons, the control panel must always be engaged whilst the vehicle is moving.

When leaving the vehicle, open the control panel and remove the KeyCard in order to prevent theft.

2ON

Switching on the unit

Insert the KeyCard and press ON briefly.

The unit is switched on in the last operating mode selected and with the previously selected volume.

Switching off the unit

Press ON for approx. 1 second.

The display can be adjusted for the desired viewing angle in order to improve legibility. Refer to “Improving the legibility of the display” if necessary.

Switching the sound on/off

Press ON briefly. “MUTE” appears on the display when the sound is switched off.

To switch the sound back on again, turn the volume knob 3.

Switching the unit on/off using the KeyCard

Insert/remove the KeyCard to switch the unit on and off.

Refer also to the description of the KeyCard anti-theft system @ in the condensed instructions.

Switching on/off by the ignition

The unit may be connected up such that it is switched on and off by the vehicle ignition.

When the ignition is switched off, a double beep reminds you to remove the KeyCard before leaving the vehicle.

Switching on whilst the ignition is off

With the ignition off (and the KeyCard inserted), proceed as follows to operate the unit:

Press ON when the double beep sounds.

The unit is switched on.

The unit switches itself off automatically after an hour’s use in order to prevent the vehicle battery from running down.

Condensed instructions

3Adjusting the volume

Turn the knob to adjust the volume.

The selected value is shown on the display. When switched on, the unit plays at the preselected volume (ON VOL).

ON VOL can be changed (refer to “Programming with DSC – ON VOL”).

4Softkeys/display

Softkey = key with variable function. The functions shown in the display can be selected.

Radio mode

In radio mode, use TU to toggle between menu level 1 and menu level 2. The system automatically returns to menu level 1 when no key has been pressed for eight seconds.

Menu level 1

Station keys and memory levels

NEXT - FM

Switch between the memory levels FM I, FM II, FM T.

NEXT - AM, AMT

Switch between the AM and AMT frequency bands.

ST1 - ST6

ST1ST6 can be used on this menu level to store radio stations on the FM levels I, II and “T”.

You can store six stations each on the AM and AMT bands.

Store station –press one of the station buttons ST1ST6 until the station can be heard again (beep).

Call up station –select the frequency band. On FM, select the memory level using NEXT and press the appropriate station key briefly.

Menu level 2

Adjusting radio functions

NEXT - FM

Switch between the memory levels FM I, FM II, FM T.

NEXT - AM, AMT

Switch between the AM and AMT frequency bands.

BND

Select the frequency band and memory level (FM I, FM II, FM T, AM, AMT).

SCA - Scan

a) PTY is deactivated (logo is lit normally, not in reverse video)

Press SCA (Radio Scan) briefly – “SCAN” appears in the display alternately with the code of the sampled station. All stations on the frequency band which can be received are sampled briefly.

PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH DEUTSCH

Condensed instructions

Press SCA for approx. 1 second (Preset Scan) –

a beep sounds, “SCAN” appears in the display alternately with the code

of the sampled station.

The stations stored on the station keys and which can be received are sampled briefly.

Stopping Radio Scan/Preset Scan: Press SCA or the seek rocker again.

b) PTY is activated (logo appears in reverse video on the display)

Press SCA –

the stations transmitting the selected PTY program type are sampled briefly.

(RDS mode/Alternative Frequency) RDS mode on/off: Select menu level 2 using TU and press AF briefly.

If “AF” appears in reverse video in the display, the radio automatically looks

for a frequency with better reception for the same station.

AF on/off: Select menu level 2 using TU and hold AF down.

EXIT

Press the key briefly to terminate or abort the adjustment process.

ENT (Enter)

Press briefly to accept/save the adjustments.

TS (Travelstore)

Press TS to switch from any frequency band to FMT or AMT. The six strongest stations are automatically stored. When they have been stored, the strongest station is selected and played.

PTY (Program Type)

PTY turns the station keys into program type keys.

“PTY” must first appear on the display in reverse video (press PTY if necessary).

A program type can now be stored and selected with each station key.

Call up PTY program types using the rocker << >> and save with the station

key (hold down for approx. 2 seconds until the beep sounds).

CD and changer mode

MIX, SCAN, RPT (repeat) and TPM can be selected in CD and changer mode by means of the corresponding softkeys.

MIX

CD tracks can be played in random order.

You can select the following functions by pressing the MIX key:

-MIX CD = CD tracks are played in random order.

In changer mode, CDs are selected in numerical order, tracks are played in random order.

-MIX MAG (changer mode only) = all tracks in the magazine are played in random order.

-MIX OFF = Switches off function.

Condensed instructions

SCA - Scan

For sampling the tracks briefly (in CD changer mode, the tracks of all CDs).

Starting Scan:

Press SCA. The tracks are sampled briefly in turn in ascending order. The sampling time can be adjusted. (Refer to “Programming with DSC – SCANTIME”.)

Ending Scan:

Press SCA. The last track selected continues playing.

RPT - Repeat

CD tracks and, in changer mode, CDs, can be repeated.

Press the RPT key to select the following functions:

-REP TRCK = Repeat track

-REP CD = Repeat CD (only in changer mode)

-RPT OFF = Deactivate function.

TPM - Track Program Memory For storing and playing preferred

tracks in CD and CD changer mode. Up to 30 CDs can be managed in CD mode and 99 CDs in changer mode with a maximum of 40 tracks per CD. (Refer to the “Storing tracks with TPM” section.)

CLR

For clearing the TPM memory (refer to the “Clearing the TPM memory” section).

5DPE

For activating/deactivating the equalizer and changing the equalizer settings.

Activating/deactivating the equalizer: Press DPE until the beep sounds. When the equalizer is activated, “EQ” appears in the display.

Changing the equalizer settings: Press DPE briefly. Further information on changing the equalizer settings: “Equalizer settings”:

	6 Rocker		DEUTSCH
	6 Rocker
	Radio mode

	If the rocker is pressed on menu level		ENGLISH
	2, menu level 1 is automatically called		ENGLISH
	2, menu level 1 is automatically called
	up.


			FRANÇAIS


	/ Station seek		ITALIANO
	/ Station seek
	Up
	Down
	<< / >> Up/down in steps

			NEDERLANDS

	(on FM, only when AF and PTY are
	deactivated)
	FM only:
	FM only:
	<< / >> Page through the transmission		SVENSKA
	chains when AF is activated and		SVENSKA
	chains when AF is activated and
	PTY deactivated,
	e.g.: NDR 1, 2, 3, 4, N-JOY ... .


			ESPAÑOL


			PORTUGUÊS

Condensed instructions

CD and CD changer mode

<</ >> Select CD (changer mode only) >> Up: Press briefly

<<Down: Press briefly

/ Select track

Up: Press briefly

CUE - fast forward (audible):

Keep depressed

Down: Press twice or more in quick succession

Replay track from beginning:

Press briefly

REVIEW - fast rewind (audible):

Keep depressed

Further functions of the rocker:

Further settings available with

AUD 8

DSC-MODE 7

PTY

The settings are available only if the corresponding function is activated.

7DSC (Direct Software Control)

You can adjust programmable default settings using DSC.

Further information: “Programming with DSC”.

8AUD

For adjusting the treble, bass, balance (left/right), fader (front/rear) and loudness settings.

Loudness = adjustment of the lowvolume sounds to the human ear.

Different treble, bass and loudness settings can be stored for the FM, AM, CD and AUX modes.

Adjustment procedure:

Select mode.

Press AUD once: “BASS” and the selected value appear on the display.

Select from the options using << / >>. Use / to change the settings.

The values selected are shown on the display. The last setting selected is stored automatically.

Particular feature of loudness:

The values can be selected between LOUD 6 and LOUD OFF by means of the rocker /.

Leaving AUD:

Press EXIT.

If no change is made within eight seconds, AUD is automatically switched off.

Condensed instructions

9DIS

Selecting various display modes. Radio mode

Press DIS briefly:

-Name of the selected station

-Currently selected frequency

-PTY code

A condition is that an RDS station can be received with an adequate field strength.

Press DIS for approx. two seconds: Toggle display between time and frequency band (incl. memory level in the case of FM).

CD mode

Press DIS briefly:

-Track number, time

-Track number, time played

-CD name, track number

Changer mode

Press DIS briefly:

-CD number, track number, time

-CD number, track number, time played

-CD name, track number

:Display

NDR2	-	Station name
FM	-	Frequency band
I, II, T	- Memory level I, II or Travel-
		store
PTY	- Program type is activated
AF	-	Alternative frequency with
		RDS
lo	- Seek sensitivity can be se-
		lected with DSC
EQ	-	Equalizer is activated
DISC-IN	-	CD is inserted

TRACK 13 -		Track number
or
VIVALDI	-	CD name (CD changer mode)
or
CD 5 T 2	-	CD number and track number
		(CD changer mode)
MIX	-	Tracks can be played in ran-
		dom order
SCA	-	Sample tracks
RPT	-	Repeat function for CD/
		changer mode
TPM	-	Save and play preferred
		tracks
CLR	-	Clear TPM memory

FM I, II, T	-	FM memory level
or
AM, AMT	-	Frequency band
or
00:20	-	Time (time played)
or
12:50	-	Time

PORTUGUÊS ESPAÑOL SVENSKA NEDERLANDS ITALIANO FRANÇAIS ENGLISH DEUTSCH

Condensed instructions

;CDC

Switch to changer mode (only if a changer is fitted).

If a changer is not fitted, AUX is selected. Condition: AUX ON must be selected in the DSC menu.

<CD

Switch to CD mode

=TU (TUNER)

For switching to the radio mode, for toggling between FMI, FM II, TS (Travelstore), AM and AMT memory levels/ frequency bands.

>Slot for CD

When the CD is inserted with the label facing upwards it is automatically transported into the operating position. CD play mode is selected automatically.

?Visual anti-theft protection

The following conditions must be met if the LED is to flash as a visible antitheft protection measure:

The unit is switched off; The control panel is open; The KeyCard is removed;

The ignition is off and LED ON is selected in the DSC menu (factory default setting).

Further information: “Programming with DSC, LED ON/OFF”.

@KeyCard anti-theft protection system

The KeyCard must be inserted before the unit can be operated.

KeyCard

Inserting the KeyCard

To disengage the control panel, press key 1. The control panel folds down. Insert the KeyCard with the contact surface facing downwards (see diagram). Engage the control panel.

Remove the KeyCard following the procedure in reverse.

Important: read the information under “KeyCard anti-theft protection system”.

AEject

Hold the key for CD ejection down for approx. 2 seconds: the CD is ejected.

For safety reasons, the control panel must always be engaged whilst the vehicle is moving.

When leaving the vehicle, open the control panel and remove the KeyCard in order to prevent theft.