Radio / Cassette
Dresden RCR 128
Boston RCR 128
Operating instructions
1 |
2 |
3 |
4 |
5 |
6 |
7 |
8 |
9 |
10 |
11 |
12 |
13 |
14 |
15 |
16 |
17 |
18 |
19 |
20 |
21 |
22 |
2
Display
The display consists of three fields and changes according to the operating mode and function.
Display field 1:
Radio mode
Memory banks and wavebands
Brief indication of preset station (e.g. P1)
Cassette mode
CAS - cassette inserted
Audio
Numeric and graphic representation of the volume and audio settings.
DSC
Permanent display for DSC programming. Graphic representation of the adjusted volume level.
Display field 2:
Radio mode
Radio frequency or station name PTY programme type
Cassette mode
TAPE1/TAPE2 - side of tape being played. Displays active function.
DSC
Serves as display and entry field during DSC programming
Clock display
Miscellaneous
Indicates new source (e.g. when changing from radio to cassette)
Display field 3:
Displays active functions.
|
- Stereo |
|
- Cassette inserted |
LD |
- Loudness |
Radio mode |
|
AF |
- RDS alternative frequency |
PTY |
- RDS programme type |
TA |
- Priority for traffic information |
TP |
- Traffic programme station |
lo |
- Seek tuning sensitivity |
DEUTSCH ENGLISH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS
19
Contents |
|
Display .................................................. |
19 |
Quick reference ................................... |
21 |
Important notes ................................... |
23 |
What you need to know ........................ |
23 |
Traffic safety ......................................... |
23 |
Installation ............................................. |
23 |
Warning note ........................................ |
23 |
Clock .................................................... |
24 |
Setting the clock ................................. |
24 |
Release panel ....................................... |
24 |
Theft protection ..................................... |
24 |
Fixing the release panel ....................... |
25 |
Selecting the audio mode .................. |
25 |
Radio operation with RDS |
|
(Radio Data System) ........................... |
25 |
AF - Alternative frequency .................... |
25 |
REG - regional programme .................. |
25 |
Selecting a waveband .......................... |
26 |
Station tuning ........................................ |
26 |
Automatic seek tuning / .................. |
26 |
Manual tuning with << >> ..................... |
26 |
Scrolling through the broadcasting |
|
networks (FM only) ............................... |
26 |
Switching between the memory |
|
banks (FM) ............................................ |
26 |
Storing stations ..................................... |
26 |
Automatically storing the strongest |
|
stations with Travelstore ....................... |
27 |
Recalling stored stations ...................... |
27 |
Scanning stations with |
|
Radio Scan ........................................... |
27 |
Selecting the automatic tuning |
|
sensitivity .............................................. |
27 |
PTY - Programme Type ...................... |
27 |
Programme types ................................. |
28 |
Switching PTY ON/OFF ........................ |
28 |
Checking the programme type of the |
|
station ................................................... |
28 |
Displaying the selected programme |
|
type ....................................................... |
28 |
Selecting a programme type ................ |
28 |
Storing programme types ..................... |
29 |
Scanning stations with PTY SCAN ...... |
29 |
PTY priority ........................................... |
29 |
Traffic programme station reception |
|
with RDS-EON ..................................... |
30 |
Traffic announcement priority on/off .... |
30 |
Warning beep ....................................... |
30 |
Switching the warning beep off ............ |
30 |
Automatic seek tuning start |
|
(Cassette operation) ............................. |
30 |
Adjusting the volume for traffic |
|
announcements and the warning |
|
beep ...................................................... |
31 |
Cassette deck operation .................... |
31 |
Cassette playback ................................ |
31 |
Cassette eject ....................................... |
31 |
Fast winding .......................................... |
31 |
Reversing the tape ............................... |
31 |
Traffic information during |
|
cassette playback ................................. |
31 |
DSC programming .............................. |
32 |
Overview of the DSC factory |
|
settings .................................................. |
33 |
Appendix .............................................. |
33 |
Specifications ........................................ |
33 |
20
Quick reference
1REL
To release the detachable panel (theft protection).
Press this knob and remove the release panel.
2ON - Power up/down
Press this button to turn the equipment on. It will play at the preset volume. If you press this button briefly during radio reception, the volume will turn down instantly (MUTE).
This function is cancelled by pressing the ON button again. You can programme the mute volume (refer to “DSC programming”).
Press the button for about 2 seconds to turn the unit off.
Switching on/off via the ignition:
If the set has been connected correspondingly, it can also be turned on and off with the vehicle ignition.
Press the ON button to keep on operating the set when the ignition is switched off.
The set will switch on. To avoid that the battery goes flat, the system will be turned off automatically after one hour of playback.
3Volume knob
Turn the knob to set the volume.
4 
Eject
Press this button to eject the cassette.
5Cassette slot
Insert the tape into the slot with the open side showing to the right. The tape will be played in the direction previously selected.
6Display
Displays all settings, operating modes and functions.
7 
Fast winding
To fast rewind the tape for direction “TAPE 1”.
To fast forward the tape for direction “TAPE 2”.
8 
Fast winding
To fast forward the tape for direction “TAPE 1”.
To fast rewind the tape for direction “TAPE 2”.
7+ 8 Reversing the tape (PROG)
Press both buttons simultaneously.
9 Rocker switch
Radio mode
/ 
Seek tuning
Up
Down
<</>> Up/down in short intervals
(on FM only if „AF“ is off)
For FM only:
<</>> Scrolling through the broadcasting networks, if AF is on. Example: NDR 1, 2, 4, N-Joy, FFN ...
Extra function of rocker switch:
For additional settings use
AUD F
DSC-MODE E
PTY <
Requirement: The respective function is activated.
:SRC/SC
(SRC = audio source, SC = scan) Press button briefly to select the operating mode (tuner, cassette). The active mode appears in the display.
DEUTSCH ENGLISH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS
21
Press SRC/SC longer to select the SCAN function.
Radio mode
Press SRC/SC longer.
The radio will scan all receivable FM, MW and LW stations (Dresden RCR 128 without MW, LW). “SCAN” and the station name (if applicable) appear on the display one after another (only for FM).
PTY Scan
PTY Scan can be started if PTY is on (“PTY” will be displayed).
The radio will scan all stations broadcasting the selected programme type.
;AF·TA
Alternative Frequency in RDS mode: TA (Traffic Announcement = priority for traffic programs)
If “AF” is displayed, the radio will automatically search for a radio frequency offering the same programme in a better quality (using RDS).
TA on/off:
Press AF·TA briefly: “TA” will be displayed, priority for traffic programs activated.
Press AF·TA briefly: TA off.
“TP” will be displayed when a traffic programme is played.
AF on/off:
Press AF·TA longer: a beep will be emitted; “AF” appears.
Press AF·TA longer: a beep will be emitted; “AF” disappears.
<PTY (Programme Type)
You can select among various programme types. Using the rocker switch << >> it is possible to recall all PTY programme types, if PTY is activated (“PTY” lights up in the display).
=BA/TS
Switches between the wavebands/ memory banks FM1, FM2, FMT (Travelstore), MW and LW (Dresden RCR 128 without MW, LW).
Extra function: Travelstore
To store the six most powerful radio stations in the Travelstore bank: Press BA/TS until a beep sounds and “T-STORE” appears.
>...C - Preset buttons 1 to 6
Radio mode
You can store six stations in each memory bank (1, 2, and “T”).
On MW and LW you can store six stations each (except for Dresden RCR 128).
Store station - hold down a preset button in radio mode until a beep is emitted.
Recall station - select a waveband and also the memory bank on FM; press the relevant preset button briefly. The selected preset button will briefly appear in display field 1 (e.g. P1).
D
DIS - clock display
Radio mode
Press this button briefly and the time will be displayed for a while.
Cassette mode
Press this button to switch the display between the cassette direction and clock indication.
EDSC Direct Software Control
Adjusts programmable basic settings. Refer to “DSC programming”.
FAUD
Default settings for treble and bass
You can store different settings for the FM, MW, LW and cassette mode
(Dresden RCR 128 without MW, LW).
22
Loading...