Blaupunkt RCR 45 User Manual

Radio / Cassette

Dresden

RCR 45

Operating instructions

1

2

3

4

5

6

7

8

9

10

11

12

13

19

18

17

16

15

	ENGLISH
	FRANÇAIS
	ITALIANO
14	NEDERLANDS
	SVENSKA
	ESPAÑOL
	PORTUGUÊS

3

Contents
Short instructions ........................	17
Important notes ............................	20
Precautions ...........................................	20
Traffic safety .........................................	20
Installation/Connection ..........................	20
KeyCard theft-protection system 21
Putting the unit into operation ...............	21
Removing the KeyCard .........................	21
“Defining” a second KeyCard/
Replacing a KeyCard ............................	21
Displaying the radio pass data ..............	21
Optical indication for extra security .......	22
Radio operation with RDS ...........	22
AF - Alternative frequency ....................	22
REG - regional programme ...................	22
Automatic tuning ...................................	23
Manual tuning .......................................	23
Scrolling through the broadcasting
network (only FM) .................................	23
Changing the memory bank ..................	23
Storing stations .....................................	23
Automatically storing the strongest
stations with Travelstore .......................	24
Recalling stored stations .......................	24
Sampling stored stations briefly
(Preset Scan) ........................................	24

Scanning stations with Radio-Scan ......	24
Selecting the seek tuning sensitivity .....	24
Switching from stereo to mono (FM) .....	24
Receiving traffic programme
stations with RDS-EON ................	25
Traffic announcement priority on/off .....	25
Warning beep ........................................	25
Switching the warning beep off ..........	25
Automatic seek tuning start ...................	25
Adjusting the volume for traffic
announcements and the warning beep . 25
Tape operation ..............................	26
Inserting a tape .....................................	26
Removing a tape ...................................	26
Fast Forward/Rewind ............................	26
PROG selector ......................................	26
DSC programming ........................	27
Overview of the DSC factory settings ...	28
Appendix .......................................	28
Care notes ............................................	28
Mechanism/cassette tapes ................	28
Specifications ........................................	28

16

Short instructions

1On Off Volume

This unit can also be switched on and off with the KeyCard B.

Also, when being connected correctly, you may turn the radio on and off via the ignition of your car.

Use one of the following possibilities to continue operating the set when the ignition is switched off:

a)Switch on/off with knob 1.

b)Remove/insert the KeyCard.

c)Press AUD 3.

When turning on the unit with the KeyCard or by pressing the AUD button, the system will start to play with the volume adjusted last.

When operating the unit with the ignition being switched off, the system will automatically shut down after one hour in order to avoid that the battery goes flat.

2LD

Loudness - When listening at a low level, the Loudness function creates a more natural sound by boosting the low frequency range.

To switch the Loudness on/off: Press LD.

For more information, read chapter “DSC programming”.

3AUD/GEO

AUD –

To adjust the treble and bass frequencies with the rocker switch.

Treble +

Treble –

Bass –

Bass +

	GEO –		DEUTSCH
	To adjust the balance (left/right) and
	fader (front/rear) with the rocker switch.
			ENGLISH
	Fader front		FRANÇAIS
	Fader rear
	Balance left
	Balance right
			ITALIANO
	To alter a setting,
	• press AUD or GEO and then chan-
	ge the value with the rocker switch.
			NEDERLANDS
	The adjusted value is indicated in the
	display.
	The last setting will be stored automati-
	cally.
	To finish the setting: Press AUD or		SVENSKA
	GEO.
	If the setting remains unchanged within
	8 seconds, the display will switch back
	to the previous condition.
			ESPAÑOL
			PORTUGUÊS

17

4DSC (Direct Software Control) Use the DSC function to customise

certain programmable, basic settings to suit your personal needs and preferences. See chapter “DSC programming” for more information.

5AF - Alternative frequency during RDS operation

When “AF” lights up in the display, the radio will automatically search for a frequency offering better reception of the same RDS programme.

To switch AF on/off: Press AF briefly.

6 REG

7lo/dx

To alter the automatic seek tuning sensitivity.

If “lo” is displayed, the radio will only pick up strong, local stations (low sensitivity).

If “lo” does not light up, the radio will also pick up weaker, distant stations (high sensitivity).

To switch over: Press lo or dx briefly. For more information, see chapter “DSC programming”.

8Cassette removal

Press .

REG ON / REG OFF

With REG ON the system will only switch to a better alternative frequency if the latter belongs to a linked station offering the same regional programme (see “REG - regional programme). To switch REG on or off: Press REG

until “REG ON” or “REG OFF” appears in the display (BEEP tone).

9Cassette loading slot

Insert tape (side A or 1 up; the open side facing to the right).

:Display

Radio operation:

NDR1 NDS - Station abbreviation or frequency

FM	- Waveband
T	- Memory bank (I, II, T)
5	- Preset button (1 - 6)
	- Stereo
lo	- Seek tuning sensitivity
AF	- Alternative RDS frequency
TP	- Traffic programme identifier
TA	- Priority for traffic programme
	stations
LD	- Loudness

Tape operation:

TR1--PLAY - Side 1 (or 2)

18