Blaupunkt CD70 User Manual

Radio / CD

Denver CD70

Hamburg CD70

Orlando CD70

Phoenix CD70

Operating instructions

Bitte aufklappen Open here Ouvrir s.v.p. Aprite la pagina

Hier openslaan a.u.b. Öppna Por favor, abrir Favor abrir

2

1

2

3

4

5

6

14

13

12

11

10

9

8

7

DEUTSCH ENGLISH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS

3

OPERATING ELEMENTS

1 button for opening the control unit

2Button for switching the device on and off and for muting the device

3Volume control

4Softkeys. The function of the Softkeys depends on the contents of the display at the time

5OK button for confirming menu entries and for leaving the menu

6DEQ button for calling up the equalizer menu

7Multi-function rocker

8MENU button, which calls up the basic settings menu

9AUD button for adjusting bass, treble, balance, fader and loudness

:DIS button, to change the contents of the display

;Display

<CD button, to start playing the CD

=CDC button, to start play from the CD changer (only if connected) or

play from an external audio source (only if connected)

>TUNE button, to begin radio operation Calling up the radio function menu (only possible when the radio is switched on)

32

CONTENTS

Note ...............................................	34
Road safety ...........................................	34
Fitting ....................................................	34
Accessories ...........................................	34
Guarantee .............................................	34
International telephone information .......	34
KeyCard Theft Protection ............	35
Inserting the KeyCard ...........................	35
Removing the KeyCard .........................	35
“Training” a second KeyCard /
Replacing the KeyCard .........................	35
KeyCard lost or damaged......................	36
Training a new KeyCard / entering the
master code ..........................................	36
Visual theft protection (LED) .................	36
Display Radio Passport Data ................	37
Care of the KeyCard ..............................	37
Switching On and Off ...................	37
Adjusting the Volume ...................	38
Tone and Volume ..........................	39
Adjusting the Display ..................	40
Radio Operation ...........................	41
Switching on radio operation .................	41
RDS convenience function (AF, REG) ...	41
Select waveband/memory level .............	42
Setting the station .................................	42
Adjusting the sensitivity of the station
search ...................................................	42
Saving a station .....................................	43
Saving a station automatically
(Travelstore) ..........................................	43
Going to a preset station .......................	43
Scanning through stations ....................	43
Adjusting the sample duration
(Scantime) .............................................	44
Program type (PTY) ..............................	44
Optimising radio reception ....................	45
Switching between stereo and mono ....	46
Changing the displayed information ......	46
Traffic Information ........................	46
CD operation .................................	47
Starting CD operation and inserting
the CD ...................................................	47

Removing the CD ..................................	48
Selecting a track ....................................	48
Fast searching (audible) ........................	48
Random track replay (MIX) ...................	48
Scanning tracks (SCAN) .......................	48
Repeating tracks (REPEAT) ..................	48
Changing the display contents ..............	48
Traffic announcements with CD
operation ...............................................	49
Programming favourite CD tracks .........	49
Naming CDs ..........................................	50
CD changer operation (optional)	51
Starting CD changer operation .............	51
Selecting a CD ......................................	51
Selecting a track ....................................	51
Fast searching (audible) ........................	51
Changing the display contents ..............	51
Repeating play of individual tracks or
whole CDs (REPEAT) ...........................	51
Playing tracks in random sequence
(MIX) .....................................................	51
Sampling all tracks on all CDs (SCAN) . 52
Naming CDs ..........................................	52
Programming favourite CD tracks .........	53
CLOCK - Time ...............................	54
Setting the time .....................................	54
Selecting 12/24-hour clock mode ..........	55
Having the time displayed constantly
when the device is switched off .............	55
Equalizer .......................................	55
Adjustment instructions .........................	55
Switching the equalizer on and off ........	55
Adjusting the equalizer ..........................	56
Adjusting the sharpness of the filter ......	56
Selecting the tone preset ......................	56
Adjusting the level indicator ..................	56
Equalizer adjustment guide ...................	57
External audio sources ................	58
TMC for dynamic navigation
systems .........................................	58
Pre-amplifier / subout ..................	59
Technical data ..............................	59
Installation instructions .............	226

DEUTSCH ENGLISH FRANÇAIS ITALIANO NEDERLANDS SVENSKA ESPAÑOL PORTUGUÊS

33

NOTES

Thank you for choosing a Blaupunkt product. We hope your new device brings you a lot of pleasure.

Note

Before you use your car radio for the first time, please read this guide carefully and make yourself familiar with the device. Keep this guide in the car for later reference.

Road safety

Road safety has the first priority. Only make adjustments to your car radio when the traffic conditions allow. Familiarise yourself with the device before you start driving.

You must be able to hear audible alarms from police vehicles, fire engines or ambulances promptly when inside the vehicle. You must therefore listen at an appropriate volume when travelling.

Fitting

If you want to fit your car radio yourself, read the fitting and connecting notes at the end of the guide.

Accessories

Only use accessories approved by Blaupunkt.

Remote control

You can control the basic functions of your car radio safely and conveniently with any of the optional remote controls RC 08, RC 10 or RC 10H.

Amplifier

Any Blaupunkt amplifier can be used.

CD changer

The following Blaupunkt CD changers can be connected:

CDC A 06, CDC A 08, CDC A 072 or IDC A 09.

If an adapter cable is used (Blaupunkt no. 7 607 889 093) the CDC A 05 or CDC A 071 CD changers can also be connected.

Guarantee

The extent of the guarantee depends on the statutory conditions applicable in the country where the device was bought.

Regardless of statutory requirements, Blaupunkt offer a twelve month guarantee.

If you have any questions about your guarantee, please refer to your authorised Blaupunkt dealer. In every case the purchase receipt constitutes the guarantee documentation.

International telephone information

If you have any questions about the operation of the device, or if you need any other information, please call us!

The numbers for the telephone information are on the last page of this guide.

34

KeyCard theft protection

A KeyCard is included with your car radio.

The radio can also be operated with a second KeyCard.

If one KeyCard becomes lost or damaged you can obtain a replacement through your Blaupunkt dealer.

If you use two KeyCards, the settings of the first KeyCard are adopted by the first KeyCard. You can, however, store the following functions separately:

station button allocation, bass, treble, balance and fader settings, loudness, traffic announcement volume, beep volume and equalizer adjustment.

In addition to this, the last values selected for the waveband, station setting, traffic announcements, RDS, REG, scan time, search sensitivity, initial volume and SHARX are stored.

This means that the basic settings you have selected are made as soon as the KeyCard is inserted.

Inserting the KeyCard

Press the button, 1. The control unit opens.

Insert the KeyCard, as shown in the diagram (arrow 1), with the contact surfaces downwards.

2

1

3

THEFT PROTECTION

	Push the KeyCard with the carriage in							DEUTSCH
	the direction of the arrow (2) carefully as
	far as the stop.
	Close the control unit (arrow 3).
	Note:							ENGLISH
	If the wrong kind of card, such as a cashpoint
	card, is inserted into the device, “Wrong KC”
	will appear on the display. Remove the incor-
	rect card, and insert a KeyCard that is known
	to the device.							FRANÇAIS
	Removing the KeyCard
	In order to unlock the control unit
	press the		button, 1.
								ITALIANO
	The control unit opens.
	Push the card with the “carriage” to the
	right as far as the stop.
	Remove the card from the control unit.
								NEDERLANDS
	Note:
	Close the control unit.
	In order to prevent theft, remove the KeyCard
	whenever you leave the vehicle, and leave the							SVENSKA
	For reasons of safety the control unit
	control unit opened.
	must always be closed when the vehicle is
	moving.
								ESPAÑOL
	“Training” a second KeyCard /
	Replacing the KeyCard
	A second KeyCard can be “trained” as a sub-							PORTUGUÊS
	stitute if the device is operating with the first
	KeyCard.
	If you want to “train” a second KeyCard

insert the first KeyCard and switch the device on.

Press the MENU button, 8.

35

THEFT PROTECTION

Press the or button, 7, until “LEARN KC” appears in the display.

Press the button, 7. “CHANGE” appears in the display.

Remove the first KeyCard.

Insert the new KeyCard.

“LEARN OK” appears in the display. To leave the menu

Press the MENU button, 8.

The radio can now be operated with the new KeyCard.

Note:

Two KeyCards is the maximum that can be used with one device.

If you already have two KeyCards for the device and then “train” a third KeyCard, the device can no longer be used with the KeyCard that was not involved in the training process.

KeyCard lost or damaged

If all the KeyCards belonging to a device are damaged or lost, you can “train” a new KeyCard.

You can obtain a new KeyCard from your dealer.

In order to be able to use the new KeyCard you will require the device’s master code. You will find this in the device’s Car Radio Passport. The instructions for this are in the section on “Training a new KeyCard”.

Keep your Car Radio Passport in a safe place, but never in the car itself.

Training a new KeyCard / entering the master code

If you no longer have a valid KeyCard for your device, and would like to train a new KeyCard

insert the new, unknown KeyCard into the device.

Close the control unit.

If necessary, switch the device off.

Hold down the TUNE and ST1 buttons, >and 4, at the same time.

Switch the device on with the main button, 2.

“0000” appears in the display.

Enter the four-figure master code from the Car Radio Passport as follows:

Enter each of the numbers for the mas-

ter code using the and buttons,

7.

Press this button as many times as is necessary to obtain the desired number in the display.

Change the location of your input with the and buttons, 7.

When the master code is correctly shown, press the OK button, 5.

If the device switches to play, the new KeyCard has been accepted.

Visual theft protection (LED)

When the device is switched off and the KeyCard has been removed, the power button and the CD slot illumination can flash if desired. This requires the “LED” setting in the menu to be set to “ON”.

Press the MENU button, 8.

Press the or button, 7, until either “LED ON” or “LED OFF” appears in the display.

Press the or button, 7, in order to switch between the settings ON and OFF.

Press the OK button, 5, or the MENU button, 8, to leave the menu. The settings are then saved.

36

THEFT PROTECTION

SWITCHING ON AND OFF

Display Radio Passport Data

Using the supplied KeyCard you can show the Radio Passport data such as the device name, type number (7 6 ...) and the device number in the display.

Press the MENU button, 8.

Press the or button, 7, until “LEARN KC” appears in the display.

Press the button, 7.

The Radio Passport data is shown on the display as moving text.

To leave the menu

Press the OK button, 5, or the MENU button, 8, to leave the menu. The settings are then saved.

Care of the KeyCard

The KeyCard can only function properly if the contacts are free from foreign particles. Avoid touching the contacts with your skin.

If necessary, clean the KeyCard contacts using a lint-free cloth dipped in alcohol.

Switching on and off				DEUTSCH
There are a number of methods for switching
the device on or off.
Switching on and off with the
button 2				ENGLISH
Press the main button, 2, to switch on.
The device switches on.
To switch off, hold the main button, 2,				FRANÇAIS
pressed for longer than two seconds.
The device switches off.
Switching on and off with the
vehicle ignition				ITALIANO
If the device is correctly connected to the ve-
hicle ignition, and has not been switched off
with the main button, 2, it is switched on and
off along with the ignition.				NEDERLANDS
Press the main button, 2.
You can also switch the device on when the
ignition is off.
Note:				SVENSKA
In order to protect the vehicle battery, the
device is automatically switched off after an
hour if the vehicle ignition is off.
Switching on and off with the				ESPAÑOL
KeyCard
You can also switch the device on and off by
inserting and removing the KeyCard, if the
device was not previously switched off with
the main button, 2. Read the chapter on				PORTUGUÊS
“KeyCard theft protection” for information
about inserting and removing the KeyCard.

37

VOLUME

	Adjusting the volume				Muting
	The volume can be adjusted in steps from 0				You can reduce the level of the volume (mute)
					suddenly.
	(off) to 66 (maximum).
					Press the main button, 2.
	To increase the volume, turn the volume
					“MUTE” is shown on the display.
	control to the right.
	To reduce the volume, turn the volume				Cancelling the mute
	control to the left.				Press the main button, 2.
	Adjusting the switch-on volume				or
	The volume level of the device when it is				Turn the volume control, 3.
	switched on can be adjusted.				Muting during telephone
	Press the MENU button, 8.
					operation
	Press the		button, 7, as often as is		If your car radio is connected to a mobile tel-
	necessary for “ON VOL” to appear in the				ephone, the radio is muted when the tele-
	display.				phone is taken “off the hook”. This requires
	Adjust the switch-on volume with the				the mobile telephone to be connected to the
	buttons, 7, or with the volume				car radio as described in the fitting instruc-
	control.				tions.
	If you set a volume level below “1”, “LAST				If, in the course of a telephone call, a traffic
	VOL” will appear in the display. This means				announcement is made, and if traffic an-
					nouncements have been given priority, the
	that whatever volume was in use before the
					traffic announcement will be played. For more
	device was switched off will be activated again
					information, read the section on “Traffic Infor-
	when the device is switched on.
					mation”.
	Risk of serious injury!				Adjusting the volume for the
	If the level of switch-on volume is set to				confirmation tone (beep)
	maximum, the volume when switching on				With certain functions, if you hold a button
	can be very high.
					pressed for longer than two seconds, for in-
	If the volume was set to maximum				stance in order to save a station frequency to
					a station button, a confirmation tone, or beep,
	before switching off, and the value for the
					is generated. The volume level of the beep
	switch-on volume is set to “LAST VOL”, the
					can be adjusted.
	volume when switching on can be very
					Press the MENU button, 8.
	high.
							button, 7, as often as is
	Either case can result in serious injury to				Press the
					necessary for “BEEP” to appear in the
	hearing!
					display.
	Press the OK button, 5, or the MENU				Adjust the volume with the			buttons,
	button, 8, to leave the menu. The set-				7, or with the volume control. “0”
	tings are then saved.				means that the beep is off, while “9” is
					the maximum beep volume.

Press the OK button, 5, or the MENU button, 8, to leave the menu. The settings are then saved.

38