March 2010
EME1DC16
ServSensor EXP DC16
Adds 16 opto-isolated dry contacts, so you can monitor more data points from a ServSensor V4E.
Customer
Support
Information
Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500) •
FREE technical support 24 hours a day, 7 days a week: Call 724-746-5500 or fax 724-746-0746 • Mailing address: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018 •
Web site: www.blackbox.com • E-mail: info@blackbox.com
ServSensor EXP DC16
Trademarks Used in this Manual
Black Box and the Double Diamond logo are registered trademarks of BB Technologies, Inc.
Any other trademarks mentioned in this manual are acknowledged to be the property of the trademark owners.
We‘re here to help! If you have any questions about your application or our products, contact Black Box Tech Support at 724-746-5500 or go to blackbox.com and click on “Talk to Black Box.”
You’ll be live with one of our technical experts in less than 20 seconds.
Page 2 |
724-746-5500 | blackbox.com |
FCC and IC RFI Statements
Federal Communications Commission and Industry Canada Radio Frequency Interference
Statements
This equipment generates, uses, and can radiate radio-frequency energy, and if not installed and used properly, that is, in strict accordance with the manufacturer’s instructions, may cause interference to radio communication. It has been tested and found to comply with the limits for a Class A computing device in accordance with the specifications in Subpart B of Part 15 of FCC rules, which are designed to provide reasonable protection against such interference when the equipment is operated in a commercial environment. Operation of this equipment in a residential area is likely to cause interference, in which case the user at his own expense will be required to take whatever measures may be necessary to correct the interference.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This digital apparatus does not exceed the Class A limits for radio noise emission from digital apparatus set out in the Radio
Interference Regulation of Industry Canada.
Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les limites applicables aux appareils numériques de la classe A prescrites dans le Règlement sur le brouillage radioélectrique publié par Industrie Canada.
724-746-5500 | blackbox.com |
Page 3 |
ServSensor EXP DC16
Instrucciones de Seguridad
(Normas Oficiales Mexicanas Electrical Safety Statement)
1.Todas las instrucciones de seguridad y operación deberán ser leídas antes de que el aparato eléctrico sea operado.
2.Las instrucciones de seguridad y operación deberán ser guardadas para referencia futura.
3.Todas las advertencias en el aparato eléctrico y en sus instrucciones de operación deben ser respetadas.
4.Todas las instrucciones de operación y uso deben ser seguidas.
5.El aparato eléctrico no deberá ser usado cerca del agua—por ejemplo, cerca de la tina de baño, lavabo, sótano mojado o cerca de una alberca, etc.
6.El aparato eléctrico debe ser usado únicamente con carritos o pedestales que sean recomendados por el fabricante.
7.El aparato eléctrico debe ser montado a la pared o al techo sólo como sea recomendado por el fabricante.
8.Servicio—El usuario no debe intentar dar servicio al equipo eléctrico más allá a lo descrito en las instrucciones de operación. Todo otro servicio deberá ser referido a personal de servicio calificado.
9.El aparato eléctrico debe ser situado de tal manera que su posición no interfiera su uso. La colocación del aparato eléctrico sobre una cama, sofá, alfombra o superficie similar puede bloquea la ventilación, no se debe colocar en libreros o gabinetes que impidan el flujo de aire por los orificios de ventilación.
10.El equipo eléctrico deber ser situado fuera del alcance de fuentes de calor como radiadores, registros de calor, estufas u otros aparatos (incluyendo amplificadores) que producen calor.
11.El aparato eléctrico deberá ser connectado a una fuente de poder sólo del tipo descrito en el instructivo de operación, o como se indique en el aparato.
12.Precaución debe ser tomada de tal manera que la tierra fisica y la polarización del equipo no sea eliminada.
13.Los cables de la fuente de poder deben ser guiados de tal manera que no sean pisados ni pellizcados por objetos colocados sobre o contra ellos, poniendo particular atención a los contactos y receptáculos donde salen del aparato.
14.El equipo eléctrico debe ser limpiado únicamente de acuerdo a las recomendaciones del fabricante.
15.En caso de existir, una antena externa deberá ser localizada lejos de las lineas de energia.
16.El cable de corriente deberá ser desconectado del cuando el equipo no sea usado por un largo periodo de tiempo.
17.Cuidado debe ser tomado de tal manera que objectos liquidos no sean derramados sobre la cubierta u orificios de ventilación.
18.Servicio por personal calificado deberá ser provisto cuando:
A:El cable de poder o el contacto ha sido dañado; u
B:Objectos han caído o líquido ha sido derramado dentro del aparato; o
C:El aparato ha sido expuesto a la lluvia; o
D:El aparato parece no operar normalmente o muestra un cambio en su desempeño; o
E:El aparato ha sido tirado o su cubierta ha sido dañada.
Page 4 |
724-746-5500 | blackbox.com |
Table of Contents
Table of Contents
1. |
Specifications........................................................................................................................................................................................ |
6 |
|
2. |
Overview.............................................................................................................................................................................................. |
7 |
|
|
2.1 Introduction................................................................................................................................................................................... |
7 |
|
|
2.2 |
What’s Included............................................................................................................................................................................. |
7 |
|
2.3 Hardware Description.................................................................................................................................................................... |
8 |
|
|
|
2.3.1 Front Panel............................................................................................................................................................................ |
8 |
|
|
2.3.2 Back Panel............................................................................................................................................................................ |
9 |
3. |
Installation.......................................................................................................................................................................................... |
10 |
|
|
3.1 |
Connecting to the Base Unit........................................................................................................................................................ |
10 |
|
3.2 |
Setting Up a Sensor (Standard Configuration).............................................................................................................................. |
11 |
|
3.3 |
Setting Up a Sensor (Daisychained Configuration)........................................................................................................................ |
14 |
4. |
Notifications....................................................................................................................................................................................... |
18 |
|
|
4.1 Adding a Notification.................................................................................................................................................................... |
18 |
|
|
4.2 SNMP Traps.................................................................................................................................................................................. |
19 |
|
724-746-5500 | blackbox.com |
Page 5 |
ServSensor EXP DC16
1. Specifications
Components: Manufactured using highly integrated, low-power surface-mount technology to ensure long-term reliability
Data Transfer Rate: 115.2 kbps
Expandability/E-modules: Daisychain multiple E-modules, including EME1X8 and EME1DC16, uses standard RJ-45 connections and CAT5 LAN cable, connect up to 600 intelligent sensors
Maximum Cable Length: 1000 ft. (300 m)
Mean Time Between Failures (MTBF): 400,000 hours
Network Interface: (1) standard 10/100BASE-T Ethernet RJ-45 port
Connectors: Input: (16) 2-wire dry-contact inputs configured as opto-isolated (2-wire dry-contact inputs support up to 50 VDC and 80 mA of current, (1) RJ-45 expansion module input (E-in), (1) RJ-45 expansion module output (E-out)
Indicators: (3) LEDs: (1) Power, (1) Network Connectivity, (1) Dry Contact Status
Temperature Tolerance: Operating: -31 to 131° F (-35 to +55° C)
Humidity: 20 to 80%, noncondensing
Power: Output: 7.0–9 VDC, 3 amps, configurable output signals (0–5 VDC) on any of the 8 RJ-45 sensor ports Consumption: Typical 6.15 watts, 0.82 amps
Size: 1.8"H x 8.5"W x 5.4"D (4.6 x 21.6 x 13.7 cm)
Weight: 2.4 lb. (1.1 kg)
Page 6 |
724-746-5500 | blackbox.com |
Chapter 2: Overview
2. Overview
2.1 Introduction
The ServSensor EXP DC16 (EME1DC16) expansion module extends the ServSensor V4E (EME134A) capabilities by connecting an additional 16 opto-isolated dry contacts. This increases the number of data points that can be monitoried from a single ServSensor V4E.
2.2 What’s Included
Your ServSensor EXP DC16 package should contain the following items. If anything is missing or damaged, contact Black Box Technical Support at 724-746-5500 or info@blackbox.com.
•ServSensor EXP DC16
•(1) CD-ROM
•(1) 7.0 –9 V, 2.5 A power supply
•(2) Brackets for rackmounting
•(1) 5-ft. (1.5-m) straight cable
724-746-5500 | blackbox.com |
Page 7 |
ServSensor EXP DC16
2.3 Hardware Description
2.3.1 Front Panel
Figure 2-1 shows the ServSensor EXP DC16’s front panel, and Table 2-1 describes its components.
4
1
|
|
|
|
|
|
|
2 |
3 |
|
|
|
||
|
|
|
|
|
|
Figure 2-1. Front panel. |
|
|
|
|
|
Table 2-1. Front panel components. |
|
Number |
Component |
Description |
||||
1 |
|
Power LED |
|
Lights continuously when the ServSensor EXP DC16 is powered on. |
||
|
|
|
|
|
|
If the LED is flashing, there is a problem with the CPU. |
2 |
|
Link LED |
|
Lights when a network connection is present. |
||
3 |
|
RJ-45 ports |
Expansion In/Expansion Out ports. These ports are named E-in and |
|||
|
|
|
|
|
|
E-out. The E-in port connects to your ServSensor V4E base unit via a |
|
|
|
|
|
|
CAT5e straight-through cable. The E-out port is used to daisychain |
|
|
|
|
|
|
additional expansion modules via a CAT5e straight-through cable. |
4 |
|
Status/Online LEDs 1–16 |
LEDs numbered 1–16 indicate the connectivity status of the sensors |
|||
|
|
|
|
|
|
connected to each port. These LEDs also indicate system status |
|
|
|
|
|
|
during various operations. |
|
|
|
|
|
Table 2-2. Status/Online LED functions. |
|
Function |
|
|
|
Description |
|
|
Upgrade in progress |
|
|
|
The red LEDs will move from left to right to indicate activity, and the green LEDs indicate |
||
|
|
|
|
|
overall progress of the upgrade. When all the red lights are off and all the green lights are |
|
|
|
|
|
|
on, the upgrade/recovery process is complete. |
|
Unit is operating in safe mode |
Used when the ServSensor EXP DC16 loads the operating system (OS) with a minimal set |
|||||
|
|
|
|
|
of drivers. If your device enters safe mode after rebooting, contact Black Box Technical |
|
|
|
|
|
|
Support at 724-746-5500 or info@blackbox.com. |
|
Unit is in recovery mode |
The ServSensor EXP DC16 may enter recovery mode if a firmware upgrade is incomplete. |
|||||
|
|
|
|
|
The unit displays a continuously lit row of red LEDs during recovery mode. If your device |
|
|
|
|
|
|
enters recovery mode, contact Black Box Technical Support at 724-746-5500 or |
|
|
|
|
|
|
info@blackbox.com. |
|
Page 8 |
724-746-5500 | blackbox.com |
Loading...