Black & Decker HT512, HT018, TR016, HT012, HT022 User Manual

...
0 (0)

90530436 TR016 etc htrimmers 3/17/08 8:35 AM Page 1

INSTRUCTION MANUAL

Catalog Numbers

TR016, TR017, HT012, HT018, HT020, HT022, HT512,

TR016, TR017

HT012, HT018, HT020, HT512

HT022

THANK YOU FOR CHOOSING BLACK & DECKER!

GO TO WWW.BLACKANDDECKER.COM/NEWOWNER

TO REGISTER YOUR NEW PRODUCT.

BEFORE RETURNING THIS PRODUCT

FOR ANY REASON PLEASE CALL

1-800-544-6986

BEFOREYOUCALL,HAVETHECATALOGNo.ANDDATECODEAVAILABLE.INMOSTCASES,ABLACK& DECKERREPRESENTATIVECANRESOLVETHEPROBLEMOVERTHEPHONE.IFYOUHAVEA SUGGESTION ORCOMMENT,GIVEUSACALL.YOURFEEDBACKISVITALTOBLACK&DECKER.

KEY INFORMATION YOU SHOULD KNOW:

To insure extension cord does not come loose see Figure 8 for proper attachment.

In order to operate the trimmer, the lock button must first be pulled back (see figure 9) then squeeze trigger.

SAVE THIS MANUAL FOR FUTURE REFERENCE.

VEA EL ESPAÑOL EN LA CONTRAPORTADA.

INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZA DE GARANTÍA. ADVERTENCIA: LÉASE ESTE INSTRUCTIVO ANTES DE USAR EL PRODUCTO.

90530436 TR016 etc htrimmers 3/17/08 8:35 AM Page 2

SAFETY GUIDELINES - DEFINITIONS

It is important for you to read and understand this manual. The information it contains relates to protecting YOUR SAFETY and PREVENTING PROBLEMS. The symbols below are used to help you recognize this information.

DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.

WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.

CAUTION: Used without the safety alert symbol indicates a potentially hazardous situation which, if not avoided, may result in property damage.

WARNING: IMPORTANT SAFETY WARNINGS AND INSTRUCTIONS

TO REDUCE RISK OF INJURY:

Before any use, be sure everyone using this tool reads and understands all safety instructions and other information contained in this manual.

Save these instructions and review frequently prior to use and in instructing others.

WARNING: When using electric gardening appliances, basic safety precautions should always be followed to reduce risk of fire, electric shock, and personal injury, including the following:

READ ALL INSTRUCTIONS.

GENERAL SAFETY WARNINGS AND INSTRUCTIONS FOR ALL TOOLS

AVOID DANGEROUS ENVIRONMENT - Don’t use hedge trimmers in damp or wet locations.

DON’T USE IN RAIN.

KEEP CHILDREN AWAY - All visitors should be kept at a safe distance from the work area.

DRESS PROPERLY - Don’t wear loose clothing or jewelry. They can be caught in moving parts. Use of rubber gloves and substantial footwear is recommended when working outdoors. Wear protective hair covering to contain long hair.

USE SAFETY GLASSES - Also use face or dustmask if operation is dusty.

GROUND FAULT CIRCUIT INTERRUPTER (GFCI) protection should be provided on the circuit(s) or outlet(s) to be used for the hedge trimmer. Receptacles are available having built-in GFCI protection and may be used for this measure of safety.

USE RIGHT APPLIANCE - Do not use appliance for any job except that for which it is intended.

EXTENSION CORD. To reduce the risk of electric shock use only with an extension cord intended for outdoor use, such as SW-A, S0W-A, STW-A, STOW-A, SJW-A, SJOW-A, SJTW-A or SJTOW-A. Make sure your extension cord is in good condition. When using an extension cord be sure it is heavy enough to carry the current your product will draw. An undersized extension cord will cause a drop in line voltage resulting in loss of power and overheating. The following table shows the correct size to use depending on cord length and nameplate ampere rating. If in doubt, use the next heavier gage. The smaller the gage number, the heavier the cord.

2

90530436 TR016 etc htrimmers 3/17/08 8:35 AM Page 3

 

 

 

Minimum Gage for Cord Sets

 

Volts

 

Total Length of Cord in Feet

120V

 

0-25

26-50

51-100

101-150

 

 

 

(0-7,6m)

(7,6-15,2m) (15,2-30,4m) (30,4-45,7m)

240V

 

0-50

51-100

101-200

201-300

 

 

 

(0-15,2m) (15,2-30,4m) (30,4-60,9m) (60,9-91,4m)

Ampere Rating

 

 

 

 

More

 

Not more

American Wire Gage

 

Than

 

Than

 

 

 

 

0

-

6

18

16

16

14

6

-

10

18

16

14

12

10

-

12

16

16

14

12

12

-

16

14

12

Not Recommended

 

 

 

 

 

 

 

AVOID UNINTENTIONAL STARTING - Don’t carry plugged in hedge trimmer with finger on switch. Be sure switch is off when plugging in.

DON’T ABUSE CORD - Never carry hedge trimmer by cord or yank it to disconnect from receptacle. Keep cord from heat, oil, and sharp edges.

DO NOT ATTEMPT to remove cut material or hold material to be cut when blades are moving. Make sure trimmer switch is off when clearing jammed material from blades. Do not grasp the exposed cutting blades or cutting edges when picking up or holding the hedge trimmer.

DON’T FORCE HEDGE TRIMMER - It will do the job better and with less likelihood of a risk of injury at the rate for which it was designed.

DON’T OVERREACH - Keep proper footing and balance at all times.

STAY ALERT - Watch what you are doing. Use common sense. Do not operate hedge trimmer when you are tired.

DISCONNECT HEDGE TRIMMER from the power supply when not in use or when servicing or cleaning.

STORE IDLE HEDGE TRIMMER INDOORS - When not in use, hedge trimmer should be stored indoors in a dry and high or locked-up placeout of reach of children.

MAINTAIN HEDGE TRIMMER WITH CARE - Keep cutting blades sharp and clean for best performance and to reduce the risk of injury. Inspect extension cord periodically and replace if damaged. Keep handles dry, clean and free from oil and grease.

CHECK DAMAGED PARTS - before further use of the hedge trimmer, a guard or other part that is damaged should be carefully checked to determine that it will operate properly and perform its intended function. Check for alignment of moving parts, binding of moving parts, breakage of parts, mounting and any other condition that may affect its operation. A guard or other part that is damaged should be properly repaired or replaced by an authorized service center unless otherwise indicated elsewhere in this manual.

DANGER: Laceration hazard. Keep hands away from blades. Keep both hands on handles when power is on.

CAUTION: Laceration hazard. Blades coast after turn off.

SAFETY WARNINGS: DOUBLE INSULATION

Double insulated tools are constructed throughout with two separate layers of electrical insulation or one double thickness of insulation between you and the tool’s electrical system. Tools built with this insulation system are not intended to be grounded. As a result, your tool is equipped with a two prong plug which permits you to use extension cords without concern for maintaining a ground connection.

NOTE: Double insulation does not take the place of normal safety precautions when operating this tool. The insulation system is for added protection against injury resulting from a possible electrical insulation failure within the tool.

Replacement parts: When servicing all tools, USE IDENTICAL REPLACEMENT PARTS. Repair or replace damaged cords.

3

90530436 TR016 etc htrimmers 3/17/08 8:35 AM Page 4

SAFETY WARNINGS AND INSTRUCTIONS: POLARIZED PLUGS reduce the risk of electric shock, this equipment has a polarized plug (one blade is

wider than the other). This equipment must

with a suitable polarized 2 wire or 3

extension cord. Polarized connections

together only one way. Make sure that

receptacle end of the extension cord has large and small blade slot widths. If the

does not fit fully into the extension cord, reverse the plug. If it still does not fit, obtain

suitable extension cord. If the extension

not fit fully into the outlet, contact a

qualified electrician to install the proper outlet.

not change the tool plug or extension

in any way.

 

SPECIFIC SAFETY WARNING

WARNING: Some dust created by this

contains chemicals known to the

State of California to cause cancer, birth

or other reproductive harm. Some

examples of these chemicals are:

 

• compounds in fertilizers

 

• compounds in

herbicides and pesticides

• arsenic and chromium reduce your exposure to these chemicals, dust masks that are specially designed to

chemically treated lumber approved safety equipment such out microscopic particles.

6

4

Black & Decker HT512, HT018, TR016, HT012, HT022 User Manual

90530436 TR016 etc htrimmers 3/17/08 8:36 AM Page 5

7

9

Lock Button

Trigger

Bouton de verrouillage

Gâchette

Botón de seguridad

Interruptor de Gatillo

11

13

8

10

12

5

90530436 TR016 etc htrimmers 3/17/08 8:36 AM Page 6

ASSEMBLY INSTRUCTIONS

ASSEMBLY TOOLS REQUIRED (NOT SUPPLIED):

- Phillips Screwdriver

ATTACHING BAIL HANDLE TO TRIMMER (HT012, HT018, HT020, HT022, HT512 ONLY)

The trimmer is shipped with the bail handle tied to the trimmer. To attach the bail handle:

Cut the zip tie which holds the handle to the trimmer.

Remove the phillips head screws from both sides of the trimmer housing or from the carton.

For catalog numbers (HT012, HT018, HT020, HT512), position the handle in place by sliding it on over the blade as shown in figure 1. Push the handle up onto the housing and click it into place as shown in figure 2.

Insert the phillips head screws into the openings on both sides of the handle and tighten securely (do not over tighten) as shown in figure 3.

For catalog number (HT022) attach the handle and insert the threaded screw through the handle and housing as shown in figure 4.

Insert the two screws into the holes shown in figure 5 and screw down. Do not over tighten.

Screw on the plastic knob to tighten handle to unit (figure 6).

NOTE: The handle on the HT022 is adjustable to three different positions as shown figure 7. To move handle, unscrew plastic knob, position handle as desired and retighten knob.

WARNING: DONOTOPERATETHEHEDGETRIMMERWITHOUTTHEBAILHANDLE ATTACHED.

ATTACHING EXTENSION CORD TO TRIMMER

WARNING: BE SURE HEDGE TRIMMER IS NOT LOCKED ON.

An extension cord retainer is built into the switch handle that prevents the tool from coming unplugged. To use this feature, simply double the extension cord about 8 inches (203 mm) from the end, and insert it into the slot in the bottom of the handle area. Hook the loop formed by doubling the cord over the tab, as shown in figure 8. Gently tug on the cord to insure that it is firmly retained in the trimmer’s handle. Plug the receptacle end of the extension cord into the plug blades in the trimmer (figure 8).

SAVE THESE INSTRUCTIONS FOR FUTURE USE OPERATING INSTRUCTIONS

TO TURN THE TOOL ON

Pull the LOCK BUTTON back with your thumb and then squeeze the TRIGGER with your fingers as shown in figure 9. (Once the tool is running you can release the LOCK BUTTON.) To turn the tool OFF, release the TRIGGER.

TO LOCK THE TOOL ON FOR CONTINUOUS RUN

WITH THE TOOL RUNNING, pull the LOCK BUTTON ALL THE WAY back, release the TRIGGER, then release the LOCK BUTTON. The tool is now locked ON. To turn the tool OFF, squeeze and release the TRIGGER. NOTE: In order to lock the tool on, it is important to first release the trigger and then release the lock button.

TRIMMING INSTRUCTIONS

1.EXTENSION CORD – (Figures 8 and 10) Always keep extension cord behind trimmer and away from the trimming operation. Never drape it over a hedge being trimmed. If you cut or damage the cord, unplug it at the electrical outlet immediately, before inspecting or repairing cord.

2.WORKING POSITION – ( Figure 10) Maintain proper footing and balance and do not overreach. Wear safety goggles, non-skid footwear and rubber gloves when trimming. Hold the tool firmly in both hands and turn the tool ON. Always hold the trimmer, with one hand on the switch handle and one hand on the bail handle. Never hold the tool by the blade guard.

3.TRIMMING NEW GROWTH - (Figure 11) – A wide, sweeping motion, feeding the blade teeth through the twigs is most effective. A slight downward tilt of the blade, in the direction of motion gives the best cutting.

6

90530436 TR016 etc htrimmers 3/17/08 8:36 AM Page 7

CAUTION: Do not use the trimmer for cutting stems greater than its capacity. TR016, TR017 3/8 in.(5mm).

HT012, HT018 5/8 in.(8mm).

HT020, HT512, HT022 3/4 in.(19mm).

Use the trimmer only for cutting normal shrubbery found around houses and buildings.

4.LEVEL HEDGES (Figure 12) – To obtain exceptionally level hedges, a piece of string can be stretched along the length of the hedge as a guide.

5.SIDE-TRIMMING HEDGES (Figure 13) – Begin at the bottom and sweep up.

WARNING: TO GUARD AGAINST INJURY, OBSERVE THE FOLLOWING:

READ INSTRUCTION MANUAL BEFORE USING, SAVE INSTRUCTION MANUAL.

KEEP HANDS ON HANDLES. DON’T OVERREACH.

DO NOT USE UNDER WET CONDITIONS.

DO NOT USE WITH DAMAGED EXTENSION CORD.

DO NOT UNPLUG OR STORE WITH SWITCH LOCKED ON.

DANGER: KEEP HANDS AWAY FROM BLADES.

CAUTION: BLADE COASTS AFTER TURN OFF.

Troubleshooting

Problem

Possible Cause

Possible Solution

•Unit will not start.

• Cord not plugged in.

• Plug in cord.

 

• Circuit fuse is blown.

• Replace circuit fuse.

 

• Circuit breaker

• Reset circuit breaker.

 

is tripped.

 

 

• Cord or switch is

• Have cord or switch

 

damaged.

replaced at Black & Decker

 

 

Service Center or Authorized

 

 

Servicer.

For assistance with your product, visit our website www.blackanddecker.com for the location of the service center nearest you or call the BLACK & DECKER help line at

1-800-544-6986.

MAINTENANCE

The cutting blades are made from high quality, hardened steel and with normal usage, they will not require resharpening. However, if you accidentally hit a wire fence, stones, glass or other hard objects, you may put a nick in the blade. There is no need to remove this nick as long as it does not interfere with the movement of the blade. If it does interfere, unplug unit and while wearing proper eye protection use a fine toothed file or sharpening stone to remove the nick.

If you drop the trimmer, carefully inspect it for damage. If the blade is bent, housing cracked, or handles broken or if you see any other condition that may affect the trimmer’s operation, contact your local Black & Decker Service Center for repairs before putting it back into use.

Fertilizers and other garden chemicals contain agents which greatly accelerate the corrosion of metals. Do not store the tool on or adjacent to fertilizers or chemicals. With the unit unplugged, use only mild soap and a damp cloth to clean the tool. Never let any liquid get inside the tool; never immerse any part of the tool into a liquid. IMPORTANT: To assure product SAFETY and RELIABILITY, repairs, maintenance and

adjustment should be performed by authorized service centers or other qualified service organizations, always using identical replacement parts.

7

90530436 TR016 etc htrimmers 3/17/08 8:36 AM Page 8

Accessories

WARNING: DO NOT use the hedge trimmer with any type of accessory or attachment. Such usage might be hazardous.

Service Information

Black & Decker offers a full network of company-owned and authorized service locations throughout North America. All Black & Decker Service Centers are staffed with trained personnel to provide customers with efficient and reliable power tool service.

Whether you need technical advice, repair, or genuine factory replacement parts, contact the Black & Decker location nearest you.

To find your local service location, refer to the yellow page directory under "Tools–Electric" or call:1-800-544-6986.

Full Two-Year Home Use Warranty, 30 Day Satisfaction Guarantee

Black & Decker warrants this product for two (2) years from date of purchase. This warranty does not cover damage resulting from negligent handling, misuse or lack of reasonable maintenance and care. (Proof of purchase maybe required). We will repair, without charge, any defect due to faulty material or workmanship. Please return the complete unit, transportation prepaid, to any Black & Decker/DEWALT Certified Service Center, any Black & Decker Authorized Service Centers or DEWALT Authorized Service Centers listed in the Yellow Pages under "Tools-Electric". These warranties do not cover failures due to abuse, accidental damage or when repairs have been made or attempted by other than Black & Decker and it’s Authorized Service Centers. These warranties give you specific legal rights, and you may have other rights which vary from state to state. Should you have any questions, contact your assigned Service Center (proof of purchase may be required).

This warranty does not apply to accessories. This warranty gives you specific legal rights and you may have other rights which vary from state to state. Should you have any questions, contact the manager of your nearest Black & Decker Service Center.

If you are not completely satisfied with the performance of your Black & Decker tool, you can return it within 30 days from the date of purchase with a receipt for a full refund (provided that the store is a participating retailer).

This product is not intended for commercial use.

FREE WARNING LABEL REPLACEMENT: If your warning labels become illegible or are missing, call 1-800-544-6986 for a free replacement.

Imported by

See ‘Tools-Electric’

Black & Decker (U.S.) Inc.,

– Yellow Pages –

701 E. Joppa Rd.

for Service & Sales

Towson, MD 21286 U.S.A.

 

8

Loading...
+ 16 hidden pages