Black & Decker RC1000, RC1810, RC2800 User Manual

0 (0)

Rice Cooker

First Use Safety Recommendation

Please read through this booklet for safe and efficient use of the appliance. We urge you to read the "Hint's" section and also follow all detailed instructions even if you are familiar with using this appliance.

Keep this guide handy for future reference.

English

Page 02

Farsi

Page 13

Arabic

Page 19

RC1000 / RC1800 RC1810 / RC2800

Black & Decker RC1000, RC1810, RC2800 User Manual

English

Parts Identification

A.Lid knob;

B.Lid;

C.Cooking Bowl;

A

D. Water level indication;

B

E.Heating plate:

F.Magnetic switch;

G.Main body;

H.Main cord;

I.Control lever;

J.Keep-warm indicator;

K.Cook indicator;

 

 

L

L.

Side handle;

 

M.

Measuring cup;

 

N.

Rice spoon;

J

 

 

 

K

O.

Steamer tray

I

M

N

O

C

D

E

F

G

H

-2-

English

Intended use

Your Black and Decker Rice Cooker has been designed for cooking rice as described in this manual. Do not use this appliance for any other purpose. This product is intended for household use only.

Safety instructions

Warning! When using mains-powered appliances, basic safety precautions, including the following, should always be followed to reduce the risk of fire, electric shock, personal injury and material damage.

Read all of this manual carefully before using the appliance.

The intended use is described in this manual. The use of any accessory or attachment or the performance of any operation with this appliance other than those recommended in this instruction manual may present a risk of personal injury.

Retain this manual for future reference.

Do not touch hot surfaces.

Always take care when using the appliance.

Never pull the power supply cord to disconnect the plug from the socket.

Keep the power supply cord away from heat, oil and sharp edges.

Do not allow the power supply cord to hang over the edge of your work top or table.

Always place the appliance on a level surface with adequate free space on all sides.

Do not place the appliance below a socket outlet. Do not place the appliance on a wet or slippery surface. Do not place the appliance on or near heat sources or in a heated oven.

Do not use the appliance near flammable or explosive materials.

Do not use the appliance outdoors.

Always protect the appliance from water or excessive humidity.

Do not move the appliance when in use.

Operate the appliance only with dry hands.

Do not use the appliance if you have bare feet.

If the power supply cord is damaged during use, disconnect the appliance from the power supply immediately. Do not touch the power supply cord before disconnecting from the power supply.

Disconnect the appliance from the power supply when not in use, before fitting or removing parts and before cleaning.

Allow the appliance to cool before cleaning.

Safety of others

Never leave an appliance unattended when in use.

Do not allow children or any person unfamiliar with these instructions to use the appliance.

Do not allow children or animals to come near the work area or to touch the appliance or power supply cord.

Close supervision is necessary when the appliance is used near children.

This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been give supervision or instruction concerning use of the appliance by a person responsible for their safety

Children must be supervised to make sure that they do not play with the appliance.

-3-

English

Inspection and repairs

Before use, check the appliance for damaged or defective parts. Check for breakage of parts, damage to switches and any other conditions that may affect its operation.

Do not use the appliance if any part is damaged or defective.

Do not attempt to repair the appliance yourself, instead have any damaged or defective parts repaired or replaced by an authorised repair agent.

Before use, check the power supply cord for signs of damage, ageing and wear.

Do not use the appliance if the power supply cord or mains plug is damaged or defective.

Never attempt to remove or replace any parts other than those specified in this manual.

Electrical safety

This product must be earthed. Always check that the power

supply corresponds to the voltage on the rating plate.

If the supply cord is damaged, it must be replaced by the manufacturer or an authorised Black & Decker Service Centre in order to avoid a hazard.

To avoid the risk of electric shock, do not immerse the cord, plug or appliance in water or other liquid.

Extension cables & class 1 product

If an extension lead is required a 3 core cable must be used as your appliance is earthed and of class 1 construction.

Up to 30m (100ft) can be used without loss of power.

Power plugs must match the outlet. never modify the plug in anyway. Do not use any adapter plugs with earthed (Class 1) appliances. Unmodified plugs and matching outlets will reduce the risk of electric shock.

Specific safety requirements for

Rice Cookers

Do not interfere with the automatic action of the control lever (I) by preventing it from switching to the warm mode.

Steam can escape from the unit when the accessories or lid (B) is removed.

Exercise caution when handling the rice cooker as the cooking bowl (C ) and accessories get hot during use. These may remain hot for some time after use.

To prevent damaging the non stick coating on the cooking bowl always use the plastic rice spoon (N) or other rubber or wood utensils.

If water is accidently spilled in the outer bowl area remove the power cord from the supply and dry. If water has entered the unit allow it to dry thoroughly before using the cooker again.

Always ensure that the heating plate (E) and the bottom of the cooking bowl are free from spilled particles before cooking.

Keep the heating plate clean and free from any foreign particles. Always keep the unit clean.

Always carry the rice cooker using the side handles (L).

Do not switch the unit on without having inserted the cooking bowl

Do not use the rice cooker for deep frying food and do not let any part of the rice cooker come into contact with hot oil.

Do not place on or near a hot gas or electric burner or in a heated oven.

Do not obstruct the steam vent with any article, for example a piece of cloth, during the operation.

-4-

English

Place the rice cooker on a level surface.

The accessible surfaces may become hot during operation.

Features

A.Lid knob;

B.Lid;

C.Cooking Bowl;

D.Water level indication;

E.Heating plate:

F.Magnetic switch;

G.Main body;

H.Main cord;

I.Control lever;

Use - Cooking Rice

J.Keep-warm indicator;

K.Cook indicator;

L.Side handle;

M.Measuring cup;

N.Rice spoon;

O.Steamer tray

Before first use

Remove all packaging from the appliance,

Before first use, wash the cooking bowl, lid, steaming tray, measuring jug and serving spoon in warm sudsy water, rinse and dry well.

Measure the rice using the measuring cup (M) provided. Each cup of uncooked rice normally gives two bowls of uncooked rice. Do not exceed the quantities indicated on the inside of the inner pot.

Before cooking, wash the rice thoroughly under cold running water to remove excess starch. Use a colander or fine sieve for this – do not use the cooking bowl as you may scratch the non stick coating.

Add the washed rice to the cooking bowl and add water. The amount of water required is indicated on the scale (D) on the inside of the cooking pot.

Model Number

Uncooked Rice Quantity

Water with Measuring cup provided

 

 

 

 

RC1000

1 cup

2 cups

 

 

 

 

2 cups

3 cups

 

 

 

 

 

 

3 cups

3.5 cups

 

4 cups

5 cups

 

 

5 cups

6 cups

 

 

 

 

 

RC1000 &

4 cup

5 cups

RC1810

 

 

 

6 cups

7 cups

 

 

 

 

 

8 cups

9 cups

 

10 cups

11 cups

 

 

 

 

 

RC2800

6 cup

7 cups

 

 

 

 

 

8 cups

9 cups

 

10 cups

11cups

 

 

 

 

 

12 cups

13 cups

 

15 cups

16 cups

 

 

 

 

-5-

English

Put the cooking bowl into the rice cooker. Check to ensure the cooking bowl is in good contact with the heating plate and add the lid to the cooking bowl.

Plug the supply cord into a suitable electric supply. The cook indicator (K) light will light up.

Press the control lever (I) down to start the cooking process.

When the cooking process is finished, the cook light will go out and the keep warm light (J) will come on automatically.

Remove the lid and stir the rice. For the best results, do this just after the keep warm function light comes on. Stirring the rice with the rice spoon (N) allows the steam to escape. This will give fluffier rice.

Steaming

The steaming function may only be used in combination with the rice cooking function.

Measure out the required amount of rice (as above) and ensure there is enough room for the steamer tray (O) on the top of the cooking bowl.

Add the food to be steamed into the steamer tray. Ensure the food is spread out evenly to ensure even steaming. Do not pile up the food.

Add the lid to the steaming tray ensuring it fits securely.

Continue with the rice cooking process (as described above). Once the rice is cooked

the food should be steamed. Remove the lid very carefully and remove the steam tray. Use a kitchen glove or a cloth as the steam tray will be very hot.

Be aware of the hot steam escaping.

Trying to steam too much food will result in the food not been adequately steamed.

After use

Switch off and remove the plug from the socket before leaving the appliance unattended and before changing, cleaning or inspecting any parts of the appliance.

When not in use, the appliance should be stored in a dry place. Children should not have access to stored appliances.

Cleaning and maintenance

Warning! Before cleaning and maintenance, switch the appliance off, remove the plug from the socket and allow the appliance to cool.

Warning! Do not immerse the appliance or the cord set or the plug in water or any other liquid.

Do not wash any part of the unit in a dishwasher.

Wipe the exterior with a damp cloth.

Do not use scouring pads.

If necessary, use a mild detergent to remove spots. Do not use any abrasive or solvent based cleaner.

Technical Data

Model no.

Voltage

Power

Weight

 

 

 

 

RC1000

220-240V

400W

1.7Kg

 

 

 

 

RC1800

220-240V

700W

2.5Kg

 

 

 

 

RC1810

220-240V

700W

2.5Kg

RC2800

220-240V

900W

3.7Kg

 

 

 

 

-6-

Loading...
+ 14 hidden pages