Bissell 2X 9200 User Manual

4 (1)

c>

ProHeat 2)C

 

 

 

8920, 9200,9300,9400 SERIES

3 1 Safety Instructions

i:

/

6-17

17-18

19-20

24

We're glad you purchased a BISSELL ProHeat 2X heated formula deep cleaner. Everything we know about floor care went into the design and construction of this complete, high-tech home cleaning system.

Your ProHeat 2X is well made, and we back it with a limited one-year warranty. We also stand behind it with a knowledgeable, dedicated Consumer Services department, so, should you ever have a problem, you’ll receive fast, considerate assistance. v

My great-grandfather invented the floor sweeper in 1876. Today, BISSELL is a global leader in the design, manufacture, and service of high quality homecare products tike your ProHeat 2X,

Thanks again, from all of us at BISSELL.

. President and Chief Executive Officer

Bissell 2X 9200 User Manual

IMPORTANT SAFETY INSTRUCTIONS

When using an electrical appjiance, basic precautions■ ■Useonly cleaning products formulated by

should be observed, Including the following:

BISSELIL for use in this appliance to prevent internal

Read all instructions before using your PROHEAT 2X®. compor

component

damage. See the cleaning fluid section

AWARNING; To reduce the risk of fire,

of this guide

.KeeoKeepoi openings free of dust, lint, hair, etc.

electric shock, or injury:

■ Do not point attachment nozzle at people

Do not immerse.

or animals

Use only on surfaces moistened by

■ Keep appliance on a level surface

cleaning process

■ Turn off all controls before unplugging

Always connect to a properly grounded outlet.

■ Unplug before attaching the Turbo Brush

See Grounding Instructions

■ Be extra careful when cleaning stairs

Unplug from outlet when not in use and before

■ Close attention is necessary when used by

conducting maintenance or troubleshooting

or near children

Do not leave machine when it is plugged in

WARNING: The Power Cord on this product contains

Do not service machine when it is plugged in

lead, a chemical known to the State of California to

Do not use with damaged cord or plug

cause birth defects or other reproductive harm.

If appliance is not working as it should, has been

WASH HANDS AFTER HANDLING

SAVE THBE INSTRUCTIONS.

dropped, damaged, left outdoors, or dropped into water,

have it repaired at an Authorized Service Center

 

 

Use indoors only

THIS MODEL IS EOR HOUSEHOLD USE ONLY.

 

Do not pull or carry by cord, use cord as a hardle, close

Commercial use of this unit voids the manufacturer’s

 

door on cord, pull cord around sharp corners or edges, run

warranty.

 

appliance over cord, or expose cord to heated surfaces

GROUNDING INSTRUCTIONS

 

Unplug by grasping the plug, not the cord

 

Do not handle plug or appliance with wet hands

This appliance must be connected to a grounded wiring

 

Do not put any object into appliance openings,

system. If it should malfunction or break down,

 

use with blocked opening, or restrict air flow

grounding provides a safe path of least resistance for

 

Do not expose hair, loose clothing, fingers

electrical current, reducing the risk of electrical shock.

 

The cord for this appliance has an equipment-grounding

 

or body parts to openings or moving parts

 

conductor and a grounding plug. It must only be plugged

 

Do not pick up hot or burning objects

 

into an outlet that is properly installed and grounded in

 

Do not pick up flammable or combustible materials (lighter

 

accordance with all local codes and ordinances.

 

fluid, gasoline, kerosene, etc.) or use in the presence of

 

 

 

 

explosive liquids or vapor

 

 

 

Do not use appliance in an enclosed space filled with vapors given off by oil base paint, paint

thinner, some moth proofing sub stances, flammable dust, or other explosive or toxic vapors

■ Do not pick up toxic material (chlorine bleach, ammonia,

A WARNING; Improper connection of the

 

drain cleaner, gasoline, etc.)

equipment-grounding conductor can result In a

■ Do not modify the 3-prong grounded plug

risk of electrical shock. Check with a qualified

■ Do not allow to be used as a toy

electrician or service person If you aren’t sure If

■ Do not use for any purpose other than

the outlet Is properly grounded. DO NOT MODIFY

 

described in this User’s Guide

THE PLUG. If It will not fit the outlet, have a

■ Do not operate the appliance unless the

proper outlet Installed by a qualified electrician.

This appliance Is designed for use on a nominal

 

nozzle is securely assembled in the

 

120-volt circuit, and has a grounding

 

location provided

 

attachment plug that looks like the plug In the

■ Do not unplug by pulling on the cord

drawing above. Make certain that the appliance

Use only manufacturer’s recommended

Is connected to an outlet having the same

 

attachments

 

configuration as the plug. No plug adapter

Always install float before any wet pick up operation

should be used with this appliance.

 

 

Optional Accessories:

These items are available for purchase with your model. To order replacement parts or additional tools or formulas, please refer to page 22-23.

3” Tough Stain Brush : 4”. Upholstery Tool 6” Wide Stair Tool TurboBrush™ Bare Floor Attachment

Spraying Crevice Too!

Scotchgard

protector

Tool

Ba

 

appifoator

 

 

 

16 oz. BISSELL 16 oz. 8 oz, Fiber Cleansing Tough Stain Hard Floor Formula™ with PreCleaner"' Solutions™ Scotchgard™
Protection

Optional Accessories:

These items are available for purchase with your model. To order replacement parts or additional.tools or formulas, please refer to page 22-23.

Keep plenty of genuine BISSELL Advanced Cleaning Formulas on hand so you can clean whenever it fits your schedule. Always use genuine BISSELL deep cleaning formulas. Non-BISSELL cleaning solutions may harm the machine and void the warranty.

8 oz, . Scotchgard protector Cartridge

This User’s Guide has been designed to help you get the utmost satisfaction from your BISSELL ProHeat 2X. You’ll find assembly and operating Instructions, safety precautions, as well as maintenance and troubleshooting Instructions. Please read this Guide thoroughly before assembling your Deep Cleaner.

Pay particular attention to the product diagram, assembly Instructions, and part names. Locate and organize all parts before assembly. Familiarize yourself with the parts and where they go. Following this User’s Guide will greatly enhance your ability to get the most performance from your BISSELL ProHeat 2X for many years.

Your ProHeat 2X comes in four easy to

assemble components.

. v .

Upper Handle

. ... .

. LowerBase

. Tool Caddy(2 pieces)

.

The only thing you will need to assemble your cleaner is

a Phillips head ^ screwdriver. ..........

Refer to Assembly Diagram on page 4

 

Slide Upper Handle onto Lower Handle. Screw in

 

with 3 screws.' ^

 

 

Place Upper Hose Rack onto back of Upper ■

O Handle, and secure with 1 screw.

 

 

o

Place Lower Hose Rack onto back of Upper

Handle by pushing in and sliding down until it

 

snaps into place. ■

 

;

■ '

Snap tools into the Tool Gaddy as shown in o figure 4.'

o

Wrap Power Cord and Flex Hose as shown in

figure 5.

■ ■ ■ ^

.

e

Keep Flex Hose snugly in place by using the

 

Hose Secure Latch. ■

ProHeat 2X assembly is now complete.

A WARNING;

Do Not plug in your cleaner until you have completely assembled it per the toilowing Instructions and are tamil­

lar with all instructions and operating procedures.

o

Your BISSELL ProHeat 2X Deep Cleaner is a home cleaning system that uses the power of heat and brushes to get the deep down dirt for a maximum clean. Not only does it come with a lot of unique features, it has been designed with you, the customer, in mind.

BISSELL ProHeat models all feature a patented built-in heater which will heat the hot tap water you put in up to 25 degrees hotter to safely optimize cleaning effectiveness. The heater will never allow the temperature to exceed 190 degrees. The Heater switch on the front of the machine controls the heater so you have the option to turn off the heat if you are cleaning delicate wool or oriental rugs.

The 2 Dirlifter PowerBrush rolls are designed to enhance cleaning performance. The bristle pattern safely lifts out the deep down dirt while gently grooming carpet fibers. The floating suspension self-adjusts to all carpet heights and protects your carpet if you leave the power switch ON (I) . Once the product is in the Upright position, the brushes automatically stop spinning. Tlie Detent Pedal will activate the brush when floor cleaning.

The Custom Clean feature automatically mixes hot tap water with the BISSELL formula. Simply choose one of the 4 settings (Heavy Traffic, Normal Clean, Light

Clean, or Rinse) and the ProHeat 2X will adjust the right amount of cleaning solution to mix with the heated water to fit your cleaning need.

Having a separate solution tank from the water tank also allows no waste of formula. Because the water and solution are stored separately, they are not mixed until you are ready to clean. When your cleaning job is finished, the formula can be stored ready to use in your machine for the next time!

This feature is available on all ProHeat 2X models, either on top of the Water Tank or on the Upper Handle.

Carpet protection applied at the mill typically wears down with heavy foot traffic over time and with everyday cleaning, inciuding deep cleaning. To help restore this importent protection, BISSELL offers deep cleaning formulas with Scotchgard protector and a post-appiicator to apply Scotchgard protector with the same materials used by carpet mills. This offers extra protection against dirt and tough steins to keep your carpets looking good longer.

Until now, to maintain your Scotchgard 5-year limited stain warranty, you were required to hire

a professional. By using your BISSELL ProHeat 2X machine with BISSELL formulas containing Scotchgard protector every 12 months, your carpet warranty from 3M remains In effect No other home deep cleaning system can do this for you. Refer to the Scotchgard protector warranty for details.

Our 2-in-t full capacity tenk system is designed with a heavy duty bladder inside for clean water. As you clean, the clean water in the bladder will empty and mix with the cleaning formula. Dirty water pulled out of your carpets will collect around the outside of the bladder so that clean and dirty water are always kept

separate. This allows the user to maximize tenk space, yet only carry one tank to and from the sink for emptying and filling.

Now, cleaning up your machine after the cleaning process is easier ttian ever! Simply remove the 2-in-1 Tank and remove the screwto pop out the nozzle for rinsing in the sink. Dirt, loose carpet fibers, and remaining pet hair orfuzz gets washed away in a snap.

Tills provides either floor cleaning or above the floor cleaning with the turn of a knob. If choosing above floor cleaning for upholstery, stairs, or in those creases close to the baseboards, choose the attachment appropriate for the job, attach it to the flex hose, and you are ready to go!

O

Loading...
+ 16 hidden pages