Bionaire BT49R, BT45RI User Manual

1.05 Mb
Loading...

BT45RC/45RI/46R/49R06EFM1.QXD 11/28/06 2:37 PM Page 1

remote control TOWER fan

MODEL

BT45RC

BT45RI

BT46R

BT49R

Read instructions before operating. Retain for future reference.

Instruction Leaflet

INFO-LINE

If after having read this leaflet, you have any questions or comments on your fan, call 1-800-253-2764 in North America.

Model BT45RC Shown

6.To oscillate the fan head, push the button marked

OSCILLATE « » on the remote, or OSCILLATE « » on the control panel. Push a second time to stop oscillation.

7.This fan comes equipped with a 15 level speed-setting

timer. The first time you press the TIMER button « » it will be set for a 1/2 hour. From there you can change the TIMER by pressing the button which will increase one half hour at a time, with the maximum time being 7.5 hours.

8.For a natural breeze movement, push the button marked BREEZE « » on the remote control or BREEZE « » on the control panel. This will vary the fan speeds faster and slower. By pressing the BREEZE

button « » a second time, you activate the SLEEP setting. This function will be random for the first few hours, but will eventually slow the fan speed down, and when used in conjunction with the timer settings, will ultimately turn the fan off.

NOTE: The timer can be used in conjunction with several other functions. For example: SLEEP + 4HR. TIMER causes the fan to gradually slow down over 4 hours and eventually turn off.

INDEPENDENT IONIZING ACTION (FOR BT45RI ONLY)

Your Tower Fan comes equipped with an Independent Ionizer feature that can be controlled from the control housing or the remote. The Ionizer releases negative ions into the outgoing air. These particles take on a negative charge and may join with positively charged particles, such as dust, and pollen. Over time, you may see a build up of particles on the front grill. These can be removed using a soft damp cloth as instructed in the Cleaning/Maintenance section of your manual.

FAN SAFETY

PLEASE READ AND SAVE THESE IMPORTANT INSTRUCTIONS

When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following:

1.Read all instructions before using the appliance.

2.To avoid fire or shock hazard, plug the appliance directly into a 120V AC electrical outlet.

3.Keep the cord out of heavy traffic areas. DO NOT let the cord hang over the edge of a table or counter. To avoid fire hazard, NEVER put the cord under rugs, near heat registers, radiators, stoves, or heaters.

4.To protect against electrical hazards, DO NOT immerse in water or other liquids. Do not use near water.

5.Close supervision is necessary when any appliance is used by or near children.

6.Always unplug the fan before moving it, putting on or taking off parts, cleaning, or whenever the fan is not in use. Be sure to pull by the plug and not the cord.

7.Avoid contact with moving parts. DO NOT operate without fan grills properly in place.

8.DO NOT operate any appliance with a damaged cord or plug, if motor fan fails to rotate, after the appliance malfunctions, or if it has been dropped or damaged in any manner. Return appliance to manufacturer for examination, electrical or mechanical adjustment, or repair.

9.DO NOT operate in the presence of explosive and/or flammable fumes.

10.Use appliance only for intended household use as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock, or injury to persons. The use of attachments not recommended or sold by the manufacturer may cause hazards.

11.DO NOT use outdoors.

12.Always use on a dry, level surface.

13.Keep unit away from heated surfaces and open flames.

14.DO NOT attempt to repair or adjust any electrical or mechanical functions on this unit. Doing so will void your warranty. The inside of the unit contains no user serviceable parts. All servicing should be performed by qualified personnel only.

CLEANING/MAINTENANCE INSTRUCTIONS

Follow these instructions to correctly and safely care for your Bionaire® Tower Fan. Please remember:

Always unplug the fan before cleaning.

Clean the fan with a soft cloth moistened with a mild soap solution.

Do not allow water to drip on or into the fan motor housing.

Do not use any of the following as a cleaner: gasoline, thinner, benzene.

We also recommend the periodic cleaning of this fan by lightly running a vacuum cleaner nozzle over the fan grill to remove any dust or dirt that may have accumulated inside or on the unit.

FAN STORAGE INSTRUCTIONS

In the off-season, it is important to keep your fan in a safe, dry location.

We recommend using the original (or appropriately sized) box.

Please remember to protect the fan from dust or moisture.

FAN SERVICE INSTRUCTIONS

1.Do NOT attempt to repair or adjust any electrical or mechanical functions on this unit. Doing so will void the warranty.

2.If you need to exchange the unit, please return it in its original carton, with a sales receipt, to the store where you purchased it. If you are returning the unit more than 30 days after the date of purchase, please see the enclosed warranty.

3.For service information please call 1-800-253-2764 or visit our website at www.bionaire.com.

4. If you have any other questions or comments, feel free to write to us:

Bionaire®

SUNBEAM PRODUCTS, INC. DOING

BUSINESS AS JARDEN CONSUMER SOLUTIONS

Consumer Service Department 303 Nelson Avenue

Neosho, MO 64850

PLEASE READ AND SAVE THESE INSTRUCTIONS

CONSUMER SAFETY INFORMATION

THIS APPLIANCE HAS A POLARIZED

AC (ALTERNATING CURRENT) PLUG (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it

still does not fit, contact a qualified electrician to install the proper outlet.

DO NOT DEFEAT THE SAFETY PURPOSE OF THIS POLARIZED PLUG IN ANY WAY.

The length of the cord used on this product was selected to reduce the hazards of becoming tangled in, or tripping over a longer cord. If a longer cord is necessary an approved extension cord may be used. The electrical rating of the extension cord must be equal to or greater than the rating of the fan. Care must be taken to arrange the extension cord where it cannot be pulled on by children or accidentally tripped over.

Figure 1

 

 

H

A

 

 

 

 

G

 

 

I

B

 

C

 

 

 

 

J

C

 

K

 

 

D

 

 

E

 

 

 

 

F

A. Fan Insert Lens

E. Base Halves (2)

I. Remote Lens

B. Front Grill

F. Long Screws (4)

J. Remote Control

C. Small Screws (4)

G. Fan Housing

Housing

K. Power Cord

D. Stand Halves (2)

H. Control Panel

 

5 YEAR LIMITED WARRANTY

Sunbeam Products, Inc. doing business as Jarden Consumer Solutions or if in Canada, Sunbeam Corporation (Canada) Limited doing business as Jarden Consumer Solutions (collectively “JCS”) warrants that for a period of five years from the date of purchase, this product will be free from defects in material and workmanship. JCS, at its option, will repair or replace this product or any component of the product found to be defective during the warranty period. Replacement will be made with a new or remanufactured product or component. If the product is no longer

available, replacement may be made with a similar product of equal or greater value. This is your exclusive warranty. Do NOT attempt to repair or adjust any electrical or mechanical functions on this product. Doing so will void this warranty.

This warranty is valid for the original retail purchaser from the date of initial retail purchase and is not transferable. Keep the original sales receipt. Proof of purchase is required to obtain warranty performance. JCS dealers, service centers, or retail stores selling JCS products do not have the right to alter, modify or any way change the terms and conditions of this warranty.

This warranty does not cover normal wear of parts or damage resulting from any of the following: negligent use or misuse of the product, use on improper voltage or current, use contrary to the operating instructions, disassembly, repair or alteration by anyone other than JCS or an authorized JCS service center. Further, the warranty does not cover: Acts of God, such as fire, flood, hurricanes and tornadoes.

What are the limits on JCS’s Liability?

JCS shall not be liable for any incidental or consequential damages caused by the breach of any express, implied or statutory warranty or condition.

Except to the extent prohibited by applicable law, any implied warranty or condition of merchantability or fitness for a particular purpose is limited in duration to the duration of the above warranty.

JCS disclaims all other warranties, conditions or representations, express, implied, statutory or otherwise.

JCS shall not be liable for any damages of any kind resulting from the purchase, use or misuse of, or inability to use the product including incidental, special, consequential or similar damages or loss of profits, or for any breach of contract, fundamental or otherwise, or for any claim brought against purchaser by any other party.

Some provinces, states or jurisdictions do not allow the exclusion or limitation of incidental or consequential damages or limitations on how long an implied warranty lasts, so the above limitations or exclusion may not apply to you.

ASSEMBLY INSTRUCTIONS

Tools required: Phillips Head Screwdriver

1.Pass the Power Cord (K) through the channel of the 2 Stand Halves (D), and firmly clasp the two halves of the stand together.

2.Gently turn the fan upside down, with the top of the fan touching the floor. You can screw the stand into the bottom portion of the 2 Base Halves (E), by using the 4 Small Screws (C) that come with the fan.

3.Take the Fan Housing (G) and slide the half with the prongs (male end) into the holes on the other half of the base (female end), and make sure that each half of the base is flush so that (male end) cannot be pushed down any further.

4.Run the Power Cord (K) completely through the hole in the base. Once again, gently turn the fan upside down, with the top of the fan touching the floor. You can now screw the base into the stand of the fan housing, by using the 4 Long Screws (F) that come with fan. Snake the Power Cord (K) through the grooves on the bottom of the base.

NOTE: BE CAREFUL TO ALIGN THE BASE / BASE SCREWS WITH THE CORRESPONDING SCREW HOLES ON THE BOTTOM OF THE STAND.

OPERATING INSTRUCTIONS

1.Remote Control: Your remote control requires 2 AAA batteries (included) for operation. To install the batteries, simply depress the back of the remote with your thumb on the spot marked OPEN. Insert batteries according to the diagram shown inside. Replace cover.

DO NOT mix old and new batteries.

DO NOT mix alkaline, standard (carbon-zinc), or rechargeable (nickel-cadmium) batteries.

2.Set the fan on a dry level surface.

3.Plug cord into any standard 120V AC outlet.

4.To turn the fan on press the SPEED button « I II III » on the remote control or on the control panel.

5.The speed is adjustable by pushing either the SPEED button « I II III » on the remote control, or the SPEED button « I II III » on the control panel. Push this button once for LOW, again for MEDIUM, and a third time for HIGH. Push a fourth time to repeat the sequence. To turn the fan OFF, push the OFF button «OFF» on the remote control, or on the control panel.

NOTE: The BT45RI has an additional ionizer feature. The ionizer can be turned on or off by pushing the ION button located on the top of the fan housing as well as on the remote control.

This warranty gives you specific legal rights, and you may also have other rights that vary from province to province, state to state or jurisdiction to jurisdiction.

How to Obtain Warranty Service

In the U.S.A.

If you have any question regarding this warranty or would like to obtain warranty service, please call 1-800-253-2764 and a convenient service center address will be provided to you.

In Canada

If you have any question regarding this warranty or would like to obtain warranty service, please call 1-800-253-2764 and a convenient service center address will be provided to you.

In the U.S.A., this warranty is offered by Sunbeam Products, Inc doing business as Jarden Consumer Solutions located in Boca Raton, Florida 33431. In Canada, this warranty is offered by Sunbeam Corporation (Canada) Limited doing business as Jarden Consumer Solutions, located at 5975 Falbourne Street, Mississauga, Ontario L5R 3V8. If you have any other problem or claim in connection with this product, please write our Consumer Service Department.

PLEASE DO NOT RETURN THIS PRODUCT TO ANY OF THESE ADDRESSES OR TO THE PLACE OF PURCHASE.

© 2006 Sunbeam Products, Inc. doing business as Jarden Consumer Solutions. All Rights Reserved.

Printed in China

+ 1 hidden pages