Loading...
XL
XL Series
User Manual
Copyright
Copyright © 2016 by BenQ Corporation. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of BenQ Corporation.
Disclaimer
BenQ Corporation makes no representations or warranties, either expressed or implied, with respect to the contents hereof and specifically disclaims any warranties, merchantability or fitness for any particular purpose. Further, BenQ Corporation reserves the right to revise this publication and to make changes from time to time in the contents hereof without obligation of BenQ Corporation to notify any person of such revision or changes.
The performance of flicker-free may be affected by external factors such as poor cable quality, unstable power supply, signal interference, or poor grounding, and not limited to the above mentioned external factors. (Applicable for flicker-free models only.)
Power Safety
Please follow these safety instructions for best performance, and long life for your monitor.
•The AC plug isolates this equipment from the AC supply.
•The power supply cord serves as a power disconnect device for pluggable equipment. The socket outlet should be installed near the equipment and be easily accessible.
•This product should be operated from the type of power indicated on the marked label. If you are not sure of the type of power available, consult your dealer or local power company.
•An approved power cord greater or equal to H03VV-F or H05VV-F, 2G or 3G, 0.75mm2 must be used.
Care And Cleaning
•Cleaning. Always unplug your monitor from the wall outlet before cleaning. Clean the LCD monitor surface with a lint-free, non-abrasive cloth. Avoid using any liquid, aerosol or glass cleaners.
•Slots and openings on the back or top of the cabinet are for ventilation. They must not be blocked or covered. Your monitor should never be placed near or over a radiator or heat source, or in a built-in installation unless proper ventilation is provided.
•Never push objects or spill liquid of any kind into this product.
2
Servicing
Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltages or other risks. If any of the above mentioned misuse or other accident such as dropping or mishandling occurs, contact qualified service personnel for servicing.
BenQ ecoFACTS
BenQ has been dedicated to the design and development of greener product as part of its aspiration to realize the ideal of the "Bringing Enjoyment 'N Quality to Life" corporate vision with the ultimate goal to achieve a low-carbon society. Besides meeting international regulatory requirement and standards pertaining to environmental management, BenQ has spared no efforts in pushing our initiatives further to incorporate life cycle design in the aspects of material selection, manufacturing, packaging, transportation, using and disposal of the products. BenQ ecoFACTS label lists key eco-friendly design highlights of each product, hoping to ensure that consumers make informed green choices at purchase. Check out BenQ's CSR Website at http://csr.BenQ.com/ for more details on BenQ's environmental commitments and
achievements.
3
Table of Contents |
|
Copyright ...................................................................................................................................... |
2 |
Disclaimer ..................................................................................................................................... |
2 |
Power Safety ................................................................................................................................. |
2 |
Getting started ............................................................................................................................. |
6 |
Getting to know your monitor ................................................................................................ |
8 |
Front view.................................................................................................................................................... |
8 |
Back view ..................................................................................................................................................... |
8 |
Input and output ports.............................................................................................................................. |
9 |
Connection ................................................................................................................................................ |
10 |
How to assemble your monitor hardware ........................................................................ |
12 |
How to detach the stand and the base ............................................................................................... |
19 |
Adjusting the monitor height ................................................................................................................ |
21 |
Viewing angle adjustment ....................................................................................................................... |
22 |
Rotating the monitor .............................................................................................................................. |
23 |
Using the monitor wall mounting kit ................................................................................................... |
25 |
Getting the most from your BenQ monitor ...................................................................... |
26 |
How to install the monitor on a new computer .............................................................................. |
27 |
How to upgrade the monitor on an existing computer ................................................................. |
28 |
How to install on Windows 10 system (selected models only) ................................................... |
29 |
How to install on Windows 8 (8.1) system ....................................................................................... |
30 |
How to install on Windows 7 system ................................................................................................ |
31 |
How to adjust your monitor ................................................................................................. |
32 |
The control panel..................................................................................................................................... |
32 |
The S Switch .............................................................................................................................................. |
33 |
Basic menu operation.............................................................................................................................. |
34 |
Initial setup for playing games at 144 Hz ............................................................................................ |
36 |
Picture optimization ................................................................................................................................ |
38 |
Customizing the hot keys....................................................................................................................... |
38 |
Setting up your own game mode ......................................................................................................... |
38 |
Applying a suitable game mode automatically ................................................................................... |
39 |
Downloading more game modes using Game Mode Loader ........................................................ |
39 |
Adjusting display mode ........................................................................................................................... |
40 |
Using Smart Scaling.................................................................................................................................. |
40 |
Using Instant Mode.................................................................................................................................. |
40 |
Activating VESA standard DisplayPort Adaptive-Sync (selected models only).......................... |
40 |
Advanced control of your monitor from Display Pilot ................................................................... |
41 |
Navigating the main menu ...................................................................................................... |
42 |
Game Settings menu ............................................................................................................................... |
43 |
Picture menu ............................................................................................................................................. |
45 |
Display menu ............................................................................................................................................. |
48 |
System menu ............................................................................................................................................. |
51 |
4
Troubleshooting ........................................................................................................................ |
55 |
Frequently asked questions (FAQ)....................................................................................................... |
55 |
Need more help?...................................................................................................................................... |
57 |
Getting started
When unpacking please check you have the following items. If any are missing or damaged, please contact the place of purchase for a replacement.
BenQ LCD Monitor
Monitor Stand
Monitor Base
S Switch (Swift Switch)
Quick Start Guide
CD-ROM
Power Cord
(Picture may differ from product supplied for your region.)
6 Getting started
USB Cable
Video Cable: D-Sub (Optional accessory)
Video Cable: DVI-D Dual Link
Video Cable: HDMI (Optional accessory)
Video Cable: DP (Optional accessory)
Protective cover
• Available accessories and the pictures shown here may differ from the actual contents and the product supplied for your region. And the package contents may subject to change without prior notice. For cables that are not supplied with your product, you can purchase them separately.
•Consider keeping the box and packaging in storage for use in the future when you may need to transport the monitor. The fitted foam packing is ideal for protecting the monitor during transport.
Always keep the product and accessories out of reach of small children.
Getting started |
7 |
Getting to know your monitor
Front view
1. Control buttons
2. Power button
1
2
Back view
|
|
|
|
|
|
|
|
|
3 |
3. |
Handle |
|||||||||||||||||||||||||||||||||||||||
|
|
|
|
|
|
|
|
|||||||||||||||||||||||||||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
4. |
Input and output ports (vary by |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
model, see Input and output |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
ports on page 9) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
4 |
5. |
Kensington lock slot |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||||||||||||||||
|
|
|
|
|
|
|||||||||||||||||||||||||||||||||||||||||||||
|
|
|
|
|
||||||||||||||||||||||||||||||||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
5 |
|
|
|
|
|
|
|
|
|
|
|
|
|||||||||||||||||||||||||||||||||||||||||
|
|
|
|
|
|
|||||||||||||||||||||||||||||||||||||||||||||
8 Getting to know your monitor
6
7
8
9
10
11
6.VESA mount release button
7.Headphone hook
8.USB port x 2 (downstream; connecting to USB devices)
9.Headphone jack
10.Microphone jack
11.Cable management hole
•Above diagram may vary depending on the model.
•Picture may differ from the product supplied for your region.
Input and output ports
Available input and output ports may vary depending on your purchased model. Check the Specification document on the provided CD for details.
XL2430
1 |
2 3 |
4 |
5 |
6 |
7 |
8 |
9 |
XL2730
1 |
2 3 |
6 |
7 |
8 |
4 |
5 |
9 |
1.AC Power Input jack
2.Mic-In jack
3.S Switch socket
4.DisplayPort socket
5.D-Sub socket
6.DVI-D socket (*)
7.HDMI-2 (1.4) socket (*)
8.(XL2430) HDMI-1 (1.4) socket (XL2730) HDMI-1 (2.0) socket (**)
9.USB port (upstream; connecting to the PC)
•*: (For XL2730Z) Supports up to 2560 x 1440 @ 60 Hz.
•**: (For XL2730Z) Supports up to 2560 x 1440 @ 144 Hz.
•HDMI-1 (2.0) only works with compatible graphic cards and devices.
Compatible issue may occur when the HDMI-1 (2.0) input port conducts with a HDMI 1.4 output port.
Getting to know your monitor |
9 |
Connection
The following connection illustrations are for your reference only. For cables that are not supplied with your product, you can purchase them separately.
For detailed connection methods, see page 14 - 17.
XL2430
10 Getting to know your monitor
XL2730
(HDMI 1.4) (HDMI 2.0)
Getting to know your monitor |
11 |
How to assemble your monitor hardware
• If the computer is turned on you must turn it off before continuing.
Do not plug-in or turn-on the power to the monitor until instructed to do so.
•The following illustrations are for your reference only. The location and available input and output jacks may vary depending on the purchased model.
1.Attach the monitor base.
Please be careful to prevent damage to the monitor. Placing the screen surface on an object like a stapler or a mouse will crack the glass or damage the LCD substrate voiding your warranty. Sliding or scraping the monitor around on your desk will scratch or damage the monitor surround and controls.
Protect the monitor and screen by clearing a flat open area on your desk and placing a soft item like the monitor packaging bag on the desk for padding.
Gently lay the screen face down on a flat clean padded surface.
Orient and align the stand arm with the monitor |
|
||
( |
), push them together until they click and lock |
|
|
into place ( |
). |
|
|
|
|
1 |
2 |
Orient and align the stand base socket with the end of the stand arm. Make sure to align the arrow on the end of the stand to the one on the monitor base.
Lock
12 How to assemble your monitor hardware
Turn the base counterclockwise until you cannot go further.
Raise the thumbscrew lid (
) and tighten the
thumbscrew as illustrated (
). Then push the lid back.
Carefully put down the stand and the base.
Gently attempt to pull the stand and the base back apart to check that they have properly engaged.
Carefully lift the monitor, turn it over and place it upright on its stand on a flat even surface.
To move the monitor, you must hold the handle and the bottom of the stand base at the same time as illustrated. You can protect the monitor using the supplied protective cover.
|
Open |
|
|
L |
|
|
ock |
|
Open |
|
Lock |
|
Lock |
|
|
|
|
Lock |
Open |
Lock |
|
|
Open |
|
1
2 |
Lock
Open
How to assemble your monitor hardware |
13 |
You might want to adjust the monitor stand height. See Adjusting the monitor height on page 21 for more information.
You should position the monitor and angle the screen to minimize unwanted reflections from other light sources.
2. Connect the PC video cable.
To Connect the D-Sub Cable
Connect the plug of the D-Sub cable (at the end without the ferrite filter) to the monitor video socket. Connect the other end of the cable (at the end with the ferrite filter) to the computer video socket.
Tighten all finger screws to prevent the plugs from accidently falling out during use.
To Connect the DVI-D Dual Link Cable
Connect the plug of the DVI-D Dual Link cable to the monitor video socket. Connect the other end of the cable (at the end with the ferrite filter) to the computer video socket.
Tighten all finger screws to prevent the plugs from accidently falling out during use.
Either
Or
14 How to assemble your monitor hardware
To Connect the HDMI Cable
Connect the plug of the HDMI cable to the HDMI port on the monitor. Connect the other end of the cable to the HDMI port of a digital output device.
To Connect the DP Cable
Connect the plug of the DP cable to the monitor video socket. Connect the other end of the cable to the computer video socket.
If there is more than one video transmission method available to you, you might want to take the picture quality of each video cable into consideration before making the connection.
-Better quality: HDMI / DVI-D / DP
-Good quality: D-Sub
The video cables included in your package and the socket illustrations on the right may vary depending on the product supplied for your region.
3. Connect the S Switch to the monitor.
Connect the S Switch to the S Switch socket found on the back of the monitor. And place the S Switch properly on your monitor base.
Or
Or
How to assemble your monitor hardware |
15 |
4. Connect the headset.
Connect the headphone connector of your headset to the headphone jack found on the left side of the monitor.
Connect the audio cable between the PC and the monitor (via the Mic-In jack at the back). And then connect your microphone connector on the headset to the microphone jack at the left side of the monitor.
The headphone jacks work only when the audio source is HDMI or DisplayPort.
You may connect the headphones to the headphone jack found on the left side of the monitor.
5. Using the headphone hook.
Push to release the headphone hook found on the left side of the monitor (
). And pull out the headphone hook (
).
Leave your headset on the headphone hook if needed.
The maximum load capacity of the headphone hook is 400g.
1
2
16 How to assemble your monitor hardware
6. Connect USB devices.
Connect the USB cable between the PC and the monitor (via the upstream USB port at the back). This upstream USB port transmits data between the PC and the USB devices connected to the monitor.
Connect USB devices via other USB ports (downstream) on the monitor. These downstream USB ports transmit data between connected USB devices and the upstream port.
See picture on the right.
7. Connect the power cable to the monitor.
Plug one end of the power cord into the socket labelled 
on the rear of the monitor. Do not connect the other end to a power outlet just yet.
8.Organize the cables.
9.Connect-to and turn-on the power.
Plug the other end of the power cord into a power outlet and turn it on.
Picture may differ from product supplied for your region.
How to assemble your monitor hardware |
17 |
Turn on the monitor by pressing the power button on the monitor.
Turn on the computer too, and follow the instructions in Getting the most from your BenQ monitor on page 26 to install the monitor software.
To extend the service life of the product, we recommend that you use your computer's power management function.
When the monitor is powered on, to prevent overheating, do not cover the monitor with the supplied protective cover or obstruct the ventilation holes.
18 How to assemble your monitor hardware
Loading...