Technical Bulletin
Bulletin No: PRO-01-01 |
Effective Date: 3/15/73 |
Cancels: N/A |
Page: 1 of 2 |
Subject: D-2 GOVERNOR STANDARDIZATION, AFTERMARKET SALES
A study of the governors revealed that almost total coverage of the governor aftermarket sales can be done with only four piece numbers:
Pc. No. |
Range |
Comments |
275491 |
100-120 |
Furnish in place of 275200 as well as 275491 |
276049 |
105-125 |
High temperature O-Ring used on transit coach |
282128 |
100-120 |
High temperature O-Rings and waterproof with breather |
285097 |
95-110 |
Special clearance on governor body 282981. Used with compressors |
|
|
such as 279707, 284699, 284714, 284959, 284717, 284718, 284719 |
and 284720. These are the current compressors used on Cummins engines. Internal oil feed and drain.
Using these four part numbers will enable a distributor to cover the requirements for governors in the field.
In reviewing the basic D-2 governors on pages D-4 and D-5 of the Repair Exchange Manual we wish to advise the following:
Basic governor 276049, range 105-125 psi, will be used to replace the following governors:
Range 105-125 psi 276049 276263 282423
Loading...