Beko TL 546 APW, TL 546 APS User Manual

0 (0)

TL 546 APW TL 546 APS

Please read this manual first!

Dear Customer,

We hope that your product, which has been produced in modern factories and checked under the most meticulous quality control procedures, will provide you with years of good service.

For this, we recommend you to carefully read the entire manual of your product before using it and keep it at hand for future reference.

This manual

Will help you use your appliance quickly and safely.

Read the manual before installing and operating your product.

Follow the instructions, especially those for safety.

Keep the manual in an easily accessible place as you may need it later.

Besides, read also the other documents provided with your product.

Please note that this manual may be valid for other models as well.

Symbols and their descriptions

This instruction manual contains the following symbols:

C Important information or useful usage tips.

AWarning against dangerous conditions for life and property.

BWarning against electric voltage.

This product is supplied with the selective sorting symbol for waste electrical Recycling and electronic equipment (WEEE).

This means that this product must be handled pursuant to European Directive 2002/96/EC in order to be recycled or dismantled to minimise its impact on the environment. For further information, please contact your local or regional authorities.

Electronic products not included in the selective sorting process are potentially dangerous for the environment and human health due to the presence of hazardous substances.

CONTENTS

1 Your refrigerator

4

 

4 Before operating

15

 

 

 

 

STARTING.......................................

15

2 Warnings

5

 

5 Using your refrigerator 16

Electrical Requirements......................

6

Warning! This Appliance Must Be

 

 

TEMPERATURE CONTROL AND

 

 

 

 

ADJUSTMENT OF FRIDGE

16

Earthed..............................................

6

Energy Saving Tips............................

7

CHILLER COMPARTMENT DRAWER..

3 Installation

8

 

6 Maintenance and

 

 

 

cleaning

17

 

TRANSPORTATION INSTRUCTIONS. 8

 

 

 

 

INSTALLATION INSTRUCTIONS........

8

7 Do's and Don'ts

18

 

DEFROSTING..................................

10

 

 

 

 

 

 

REPLACING THE INTERIOR LIGHT

 

 

 

 

 

BULB ..............................................

11

 

 

 

REVERSING THE DOOR..................

12

 

 

 

3 EN

Beko TL 546 APW, TL 546 APS User Manual

1 Your refrigerator

 

9

1

10

2

3

9

4

 

 

9

3

 

3

11

 

3

 

5

 

6

11

7

 

8

 

1.

Interior light

6.

Crisper cover

2.

Thermostat knob

7.

Crisper

3.

Movable shelves

8.

Adjustable front feet

4.

Wine rack

9.

Adjustable door shelves

5.

Defrost water collection channel

10.

Egg compartment

 

- Drain tube

11.

Bottle shelf

CFigures that take place in this instruction manual are schematic and may not correspond exactly with your product. If the subject parts are not included in the product you have purchased, then it is valid for other models.

4 EN

2 Warnings

•DO NOT connect your appliance to the electricity supply until all packing and transit protectors have been removed.

If transported horizontally leave to stand upright for at least 4 hours before switching on to allow compressor oil to settle.

If you are discarding an old refrigerator with a lock or latch fitted to the door, disable the lock/latch, ensure that it is left in a safe condition to prevent the entrapment of young children.

This fridge/freezer must only be used for its intended purpose i.e the storing and freezing of edible foodstuff.

Do not dispose of the appliance on a fire. At BEKO, the care and protection of our environment is an ongoing commitment. This appliance which

is among the latest range introduced is particularly environment friendly. Your appliance contains non CFC /

HFC natural substances in the cooling system (Called R600a) and in the insulation (Called cyclopentane) which are potentially flammable if exposed to fire. Therefore, take care not to damage, the cooling circuit / pipes of the appliance in transportation and in use. In case of damage do not expose the appliance to fire or potential ignition source and immediately ventilate the room where the appliance is situated.

We suggest you contact your local authority for disposal information and facilities available.

See Installation Instructions on on page 8 for information on suitable

location.

5

 

To obtain the best possible performance and trouble free operation from your appliance it is very important to carefully read these instructions.

On delivery, check to make sure that the product is not damaged and that all the parts and accessories are in perfect condition.

Ensure that the plug remains readily accessible. Do not use multiple adapter bar or extension cable.

Failure to observe these instructions may invalidate your right to free service during the guarantee period.

Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction.

Do not use mechanical devices

or other means to accelerate the defrosting process, other than those recommended by the manufacturer.

Do not damage the refrigerant circuit.

Do not use electrical appliances inside the food storage compartments of the appliance, unless they are

of the type recommended by the manufacturer.

We suggest you keep these instructions in a safe place for easy reference.

This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience

and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.

Children should be supervised to ensure that they do not play with the appliance.

EN

Electrical Requirements

Before you insert the plug into the wall socket make sure that the voltage and the frequency shown on the rating plate inside the appliance corresponds to yourelectricity supply.

Rating label is on the left hand side of fridge inner liner.

We recommend that this appliance be connected to the mains supply via a

suitable switched and fused socket. The appliance must be positioned so that the plug is accessible.

Should the mains lead of the appliance become damaged or should it need

replacing at any time, it must be replaced by a special purpose made mains lead which can only be obtained from a BEKO Authorised Service Agent.

Warning! This Appliance Must Be Earthed

If the fitted moulded plug is not suitable for your socket, then the plug should be cut off and an appropriate plug fitted. Destroy the old plug which is cut off as a plug with bared cord could cause a shock hazard if inserted into a socket elsewhere in the house.

The moulded plug on this appliance incorporates a 13 A fuse. Should the fuse need to be replaced an

ASTABEAB approved BS 1362 fuse of the same rating must be used. Do not forget to refit the fuse cover. In the event of losing the fuse cover the plug must not be used until a replacement fuse cover has been fitted.

Colour of the replacement fuse cover must be the same colour as that visible on the pin face of the plug. Fuse covers are available from any good

electrical store.

6

Important! Fitting A Different Plug

As the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in your plug proceed as follows: (See diagram).

1.Connect the green-yellow or green

(Earth) wire to the terminal in the plug marked ‘E’ or with the symbol or coloured green and yellow or green.

2.Connect the blue (Neutral) wire to the terminal in the plug marked ‘N’ or coloured black.

3.Connect the brown (Live) wire to the terminal in the plug marked ‘L’ or coloured red.

With alternative plugs a 13 A fuse must be fitted either in the plug or adaptor or in the main fuse box. If in doubt contact a qualified electrician.

GREEN &

 

6mm.

 

 

 

 

YELLOW

 

 

 

OR

 

L

 

GREEN

32mm.

 

 

BROWN

 

 

 

6mm.

N

 

OR

 

RED

 

BLUE

 

22mm.

 

6mm.

 

12mm.

BLACK

 

OR

 

 

 

CORD GRIP

FUSE

FITTED WITH 1362 13A FUSE ALWAYS

BS 1362 REPLACEMENT

CARTRIDGE FUSE

 

BS

FIT

 

EN

Energy Saving Tips

1- Ensure your appliance is installed in a well ventilated area.

2- Ensure the time between buying chilled/frozen food and placing them in your appliance is kept at minimum, particularly in summer. We recommend you use a cool bag or a special carrier bag to carry perishable food.

3- Do not leave the door (s) of your appliance open longer than necessary and ensure they are closed properly after each opening.

4- Defrost frozen food in the fridge compartment, so that frozen food acts as an ice pack to assist cooling in the fridge.

7 EN

Loading...
+ 14 hidden pages