Table Blender |
|
User Manual |
|
TBN5400 |
TBN5500 |
TBN5502 |
|
EN ZH VI |
TH |
01M-8835993200-1417-01 |
|
Please read this user manual first!
Dear Customer,
Thank you for preferring a Beko product. We hope that you get the best results from your product which has been manufactured with high quality and state-of-the-art technology. Therefore, please read this entire user manual and all other accompanying documents carefully before using the product and keep it as a reference for future use. If you handover the product to someone else, give the user manual as well. Follow
all warnings and information in the user manual.
Meanings of the symbols
Following symbols are used in the various section of this manual:
C Important information and useful hints about usage.
AWARNING:Warnings for dangerous situations concerning the safety of life and property.
Suitable for contact with food.
Do not immerse the appliance, power cable, or power plug in water or any other liquids.
Protection class for electric shock.
This product has been produced in environmentally-friendly, state-of-the-art facilities.
This appliance conforms to the |
It does not contain PCB. |
WEEE regulation. |
Made in P.R.C |
CONTENTS
ENGLISH 4-16
CHINESE 17-26
VIETNAMESE 27-41
THAI 42-52
|
01M-8836013200-1417-01 |
|
|
01M-8836433200-1417-01 |
|
Table Blender / User Manual |
|
3 / EN |
|
|
|
1Important safety and environmental instructions
This section contains safety instructions that will help protect from risk of personal injury or property damage.
Failure to follow these instructions invalidates the granted warranty.
1.1 General safety
•• This appliance complies with the international safety standards.
•• This appliance is intended to be used in household and similar applications such as:
–staff kitchen areas in shops, offices and other working environments;
–farm houses;
–by clients in hotels, motels and other residential type environments;
–bed and breakfast type environments.
4 / EN |
Table Blender / User Manual |
|
|
1Important safety and environmental instructions
•• This appliance can be used by people who have limited physical, sensory or mental capacity or who do not have knowledge and experience, provided that they are supervised or they understand the instructions with regard to safe use of the product and potential dangers.
•• Children should not play with the appliance.
•• Cleaning and maintenance works should not be performed by children.
•• This appliance cannot be used by children.
•• Do not use it if the power cable, blades or the appliance itself is damaged. Contact an authorised service.
•• Unplug the appliance when left unattended, while installing/removing accessories or before cleaning.
•• Only use the original parts or parts recommended by the manufacturer.
•• Do not attempt to dismantle the appliance.
•• Do not operate or place any part of this appliance or its parts on or near hot surfaces.
•• Do not use the device for hot food.
Table Blender / User Manual |
5 / EN |
|
|
1Important safety and environmental instructions
•• Your mains power supply should comply with the information supplied on the rating plate of the appliance.
•• Do not use the appliance with an extension cord.
•• Do not touch the plug of the appliance with damp or wet hands.
•• Do not pull the power cable when unplugging the appliance.
•• Unplug the appliance before cleaning, disassembly, accessory replacement and wait for it to stop completely.
•• When emptying the container, during cleaning and grabbing chopping blades with bare hands serious injuries could result due to incorrect use. Use the plastic section trying to hold the chopping blade.
•• Never touch blades while using the appliance. There is the possibility of injury due to incorrect usage.
•• After cleaning, dry the appliance and all parts before connecting it to mains supply and before attaching the parts.
6 / EN |
Table Blender / User Manual |
|
|
1Important safety and environmental instructions
•• Do not immerse the appliance, power cable, or power plug in water or any other liquids.
•• If you keep the packaging materials, store them out of the reach of children.
•• Keep the appliance and the power cable out of the reach of children.
1.2 Compliance with the WEEE Directive and disposal of waste products
This product does not include harmful and prohibited materials 
specified in the “Regulation for Supervision of the Waste Electric 
and Electronic Appliances” issued by the Ministry of Environment 
and Urban Planning. Complies with the WEEE Regulation. This appliance has been manufactured with high quality parts and
materials which can be reused and are suitable for recycling. Therefore, do not dispose the appliance with normal domestic waste at the end of its service life. Take it to a collection point for the recycling of electrical and electronic equipment. Ask the local authority in your area for these collection points. Help protect the environment and natural resources by recycling used products.
Table Blender / User Manual |
7 / EN |
|
|
1Important safety and environmental instructions
1.3 Package information
Package of the product is made of recyclable materials in accordance with our national legislation. Do not dispose of the packaging materials together with the domestic or other wastes. Take them to the packaging material collection points designated by
the local authorities.
1.4 Things to do for energy saving
Cut the solid food into small pieces before placing them in the appliance as stated in the user manual. Follow the other instructions and times specified in the manual. Select low speed levels if suitable for the food to be prepared. Switch off and unplug the appliance after using it.
8 / EN |
Table Blender / User Manual |
|
|
2 Your blender
2.1 Overview
1
2
3/4
5
6
7
8
9
14 |
13 |
12 |
11 |
10 |
The values which are declared in the markings affixed on your product or the other printed documents supplied with it represent the values which were obtained in the laboratories pursuant to the pertinent standards. These values may vary according to the usage of the appliance and ambient conditions.
Table Blender / User Manual |
9 / EN |
|
|
2Your blender
1.Cap/Measuring cup
2.Lid
3.Jug
4.Glass jug (TBN5502)
5.Jug handle
6.Blade unit
7.Motor housing
8.Control dial
9.Non-slip feet
10.Cable storage coil
11.Mixing container
12.Chopping blade
13.Fruit filter (TBN5400/ TBN5500)
14.Stirrer
2.2 Technical data
Voltage: 220-240V~,50-60Hz
Power: 400 W Insulation class: II
Technical and design modifications reserved.
10 / EN |
Table Blender / User Manual |
|
|
3 Operation
3.1 Intended use
This appliance is intended only for household use; it is not suitable for professional use.
It is designed to chop small amounts of vegetables and fruit (strawberries, bananas, etc.).
3.2 Operation
Clean the appliance parts before initial use (see 4.1).
Remove all packaging and stickers materials and dispose of them according to the applicable legal regulations.
WARNING: Do not
A operate the appliance when it is empty or its cover is open.
1.Place your appliance on a solid and flat surface.
2.Now set the jug with the opening facing down on a level surface.
3.Assemble the blade unit carefully on the jug by turning it clockwise and lifting it by holding it from the sides of the unit.
WARNING: Do not
A remove the blade unit by lifting it from the blades.
WARNING: The blade unit is very sharp! Handle the
A blade unit with utmost care, especially during cleaning, in order to avoid injuries.
4.Cut the food into small pieces and put it in the jug.
5.Close the lid by turning it clockwise. Make sure that the cap/ measuring cup is inside the lid opening and is secured.
6.Place the jug onto the motor housing by turning it clockwise.
WARNING: Make sure that the notches A on the bottom of the jug fit those in the
motor housing.
7.Connect the power plug to a suitable power outlet.
Table Blender / User Manual |
11 / EN |
|
|
3Operation
8.The cutting speed can be variably adjusted with the control dial.
|
To operate the blend- |
||||
|
er at the low speed, |
||||
C |
turn the control dial |
||||
to “1”. If you want to |
|||||
blend with a higher |
|||||
|
speed, turn the con- |
||||
|
trol dial to the speed |
||||
|
level “2”. |
|
|
||
|
|
|
|
||
|
For |
short |
pulses of |
||
|
blending with a high |
||||
C |
speed, turn the con- |
||||
trol dial to “P”. When |
|||||
you release the con- |
|||||
|
trol dial, the blender |
||||
|
will stop and return |
||||
|
to “0” automatically. |
||||
|
|
|
|
||
|
If |
ingredients |
are |
||
|
to |
be |
added during |
||
C |
the |
|
blending |
pro- |
|
cess, then add them |
|||||
through the opening |
|||||
|
in the lid. To do this, |
||||
|
take |
out |
the |
cap/ |
|
|
measuring cup. |
|
|||
9.After the desired consistency of the blended food has been reached, turn the control dial to 0 to switch off the blender.
WARNING: Never run the blender for longer than 1 minute,
A otherwise it would overheat. After running the appliance for 1 minute, let it cool down before using it again.
10.Take the jug off from the motor housing by turning the jug counterclockwise and open the lid.
11.Take off the lid and pour the mixture into glasses or other containers.
Mix 3 units of hard food and 2 units of C water in order to have a smooth jug blender experience.
(i.e: 60 gr hard food 40 ml water)
12 / EN |
Table Blender / User Manual |
|
|
3Operation
12.Close the lid by turning clockwise. Make sure that the cap/ measuring cup is inside the lid opening and is secured.
3.3 Grinder
1.Place your appliance on a solid and flat surface.
2.Put the coffee beans (max. 50 g. to be in the grinder jug.
3.Assemble the blade unit carefully on the grinder jug by turning it counterclockwise.
4.Place the grinder jug onto the motor housing.
5.Connect the power plug to a suitable power outlet.
6.The cutting speed can be variably adjusted with the control dial.
To operate the blender at the low speed, turn the control dial
C to “1”. If you want to blend with a higher speed, turn the control dial to the speed level “2”.
7.After grinding, turn the control dial to 0 to switch off the blender.
8.Set the grinder with the opening facing down on a level surface and remove the blade unit by turning it counterclockwise.
WARNING: Never run the blender for longer than 30 sec-
A onds, otherwise it would overheat. After running the appliance for 1 minute, let it cool down before using it again.
3.4 Fruit Filter (TBN5400/ TBN5500)
The fruit filter is for fresh fruit juices and cocktails. It prevents pips and skins from your drink.
1.Fit the filter into the middle of the jug.
2.Cut the fruit into small pieces and put it in the fruit filter.
Table Blender / User Manual |
13 / EN |
|
|
3Operation
3.Close the lid of the jug by turning it clockwise. Make sure that the cap/ measuring cup is inside the lid opening and is secured.
4.Connect the power plug to a suitable power outlet.
–The cutting speed can be variably adjusted with the control dial.
5.After the desired consistency of the blended fruit has been reached, turn the control dial to 0 to switch off the blender.
6.Take the jug off from the motor housing by turning the jug counterclockwise and open the lid.
7.Take off the lid and pour the fruit juice into glasses or other containers.
3.5 Stirrer
The stirrer can be used for blending mixtures or frozen ingredients.
Place the stirrer into the lid hole. Use the stirrer during the operation by moving it anti clockwise.
14 / EN |
Table Blender / User Manual |
|
|
4 Cleaning and care
4.1 Cleaning
1.Unplug the appliance before cleaning.
2.Wait for the accessories used to stop completely.
3.Remove the blade unit from the jug after removing the jug (1) from the appliance (see. 3.2).
4.Clean the residual food in the jug
(1) under running tap water.
5.After installing chopping accessory into the jug (1), replace the jug on the body (4).
6.Completely fill or fill half of the jug (3) with warm water and some drops of dish-washing liquid and operate the appliance in highest speed for a couple of seconds.
7.Then remove and rinse the jug.
WARNING: Do not
A immerse the body
(4) in water. You can wipe it with a damp cloth.
WARNING:
Chopping blade (2) A is sharp. Do not hold
the sharp edge or immerse in water while cleaning.
WARNING: Never use petrol, solvents, A abrasive cleaners, or metal objects and hard brushes to clean
the appliance.
Table Blender / User Manual |
15 / EN |
|
|
4 Cleaning and care
4.2 Storage
•• If you do not intend to use the appliance for a long time, store it carefully.
•• Unplug the appliance before lifting it.
•• Store the appliance in a cool and dry place.
•• Keep the appliance and cable out of the reach of children.
4.3 Handling and transportation
•• During handling and transportation, carry the appliance in its original packaging. The packaging of the appliance protects it against physical damages.
•• Do not place heavy loads on the appliance or the packaging. The appliance may be damaged.
•• Dropping the appliance may render it non-operational or cause permanent damage.
16 / EN |
Table Blender / User Manual |
|
|
Beko
C
A
WEEE |
PCB |
|
|
Loading...