Refrigerator GN163120
Frižider GN163020
Frižider
Холодильник
Холодильники
Kühlschrank Koelkast Réfrigérateur Hladilnik
Šaldytuvas
Ledusskapis
Refrigerador
Frigoriferi
Koelkast
Please read this manual before using the product!
Dear Customer,
We'd like you to make the best use of our product, which has been manufactured in modern facilities with care and meticulous quality controls.
Thus, we advice you to read the entire user manual before you use the product. In case the product changes hands, do not forget to hand the guide to its new owner along with the product.
This guide will help you use the product quickly and safely.
•Please read the user guide carefully before installing and operating the product.
•Always observe the applicable safety instructions.
•Keep the user guide within easy reach for future use.
•Please read any other documents provided with the product.
Keep in mind that this user guide may apply to several product models. The guide clearly indicates any variations of different models.
C Important information and useful tips.
ARisk of life and property.
BRisk of electric shock.
The product’s packaging is made of recyclable materials, in accordance with the National Environment Legislation.
Table of Contents
1 Safety and environment instructions3
1.1. General safety . . . . . . . . . . . . . . . . . . . . . . 3 1.1.1 HC warning . . . . . . . . . . . . . . . . . . . . . . . 4 1.1.2 For models with water fountain . . . . . . . . . 5 1.2. Intended use . . . . . . . . . . . . . . . . . . . . . . . 5 1.3. Child safety . . . . . . . . . . . . . . . . . . . . . . . . 5
1.4. Compliance with WEEE Directive and Disposing of the Waste Product . . . . . . . . . 5
1.5. Compliance with RoHS Directive . . . . . . . . . 5 1.6. Package information . . . . . . . . . . . . . . . . . 6
2 |
Refrigerator |
7 |
|
|
|
3 |
Installation |
8 |
3.1. Right place for installation. . . . . . . . . . . . . . 8 3.2. Attaching the plastic wedges . . . . . . . . . . . 8 3.3. Adjusting the stands. . . . . . . . . . . . . . . . . . 9 3.4. Power connection . . . . . . . . . . . . . . . . . . . 9 3.5. Water connection . . . . . . . . . . . . . . . . . . . 9 3.6. Connecting water hose to the product. . . . 10 3.7. Connecting to water mains . . . . . . . . . . . . 10 3.8. For products using water carboy . . . . . . . . 11 3.9 Water filter . . . . . . . . . . . . . . . . . . . . . . . . 11 3.9.1.Fixing external filter on the wall (Optional) 12 3.9.2.Internal filter. . . . . . . . . . . . . . . . . . . . . . 13
4 Preparation |
15 |
4.1. What to do for energy saving . . . . . . . . . . 15 4.2. First Use . . . . . . . . . . . . . . . . . . . . . . . . . 15
5 |
Using the product |
16 |
5.1. Indicator panel . . . . . . . . . . . . . . . . . . . . . |
16 |
|
5.2. Activating water filter change warning. . . . |
23 |
|
5.3. Using the water fountain . . . . . . . . . . . . . |
24 |
|
5.4. Filling the fountain water tank . . . . . . . . . . |
24 |
|
5.5. Cleaning the water tank . . . . . . . . . . . . . . |
25 |
|
5.6. Taking ice / water . . . . . . . . . . . . . . . . . . |
26 |
|
5.7. Drip tray . . . . . . . . . . . . . . . . . . . . . . . . . |
26 |
|
5.8. Zero degree compartment . . . . . . . . . . . . |
27 |
|
5.9. Vegetable bin . . . . . . . . . . . . . . . . . . . . . |
27 |
|
5.10. Blue light . . . . . . . . . . . . . . . . . . . . . . . . |
27 |
|
5.11. Ionizer . . . . . . . . . . . . . . . . . . . . . . . . . . |
27 |
|
5.12. Minibar. . . . . . . . . . . . . . . . . . . . . . . . . . |
27 |
|
5.13. Odour filter . . . . . . . . . . . . . . . . . . . . . . |
27 |
|
5.14. Icematic and ice storage box . . . . . . . . . . |
28 |
|
5.15. Ice-maker . . . . . . . . . . . . . . . . . . . . . . . |
28 |
|
5.16. Freezing fresh food . . . . . . . . . . . . . . . . . |
30 |
|
5.17. Recommendations for storing frozen foods 30 |
||
5.18. Deep freezer details . . . . . . . . . . . . . . . . |
30 |
|
5.19. Placing the food . . . . . . . . . . . . . . . . . . . |
31 |
|
5.20. Door open alert . . . . . . . . . . . . . . . . . . . |
31 |
|
5.21. Interior light . . . . . . . . . . . . . . . . . . . . . . |
31 |
|
6 |
Maintenance and cleaning |
32 |
6.1. Preventing malodour . . . . . . . . . . . . . . . . |
32 |
|
6.2. Protecting plastic surfaces . . . . . . . . . . . . |
32 |
|
7 |
Troubleshooting |
33 |
|
2 / 35 EN |
Refrigerator / User Guide |
|
|
|
1 Safety and environment instructions |
||
This section provides the safety |
• If the product will not be used for |
|
instructions necessary to prevent |
a while, unplug the product and |
|
the risk of injury and material |
remove any food inside. |
|
damage. Failure to observe these |
• Do not use the product when the |
|
instructions will invalidate all |
compartment with circuit cards |
|
types of product warranty. |
located on the upper back part |
|
1.1.General safety |
of the product (electrical card |
|
box cover) (1) is open. |
||
• This product should not be |
||
|
||
used by persons with physical, |
|
|
sensory and mental disabilities, |
|
|
without sufficient knowledge |
1 |
|
and experience or by children. |
||
The device can only be |
|
|
used by such persons under |
|
|
supervision and instruction of |
|
|
a person responsible for their |
|
|
safety. Children should not be |
1 |
|
allowed to play with this device. |
||
|
||
• In case of malfunction, unplug |
|
|
|
the device. |
|
|
|
• After unplugging, wait at least |
|
|
|
• Do not use steam or steamed |
|||
5 minutes before plugging in |
|||
again. |
|
cleaning materials for cleaning |
|
• Unplug the product when not in |
|
the refrigerator and melting the |
|
use. |
|
ice inside. Steam may contact |
|
• Do not touch the plug with wet |
|
the electrified areas and cause |
|
hands! Do not pull the cable to |
|
short circuit or electric shock! |
|
plug off, always hold the plug. |
• Do not wash the product by |
||
• Wipe the power plug’s tip with |
|
spraying or pouring water on it! |
|
a dry cloth before plugging in. |
|
Danger of electric shock! |
|
• Do not plug in the refrigerator if |
• In case of malfunction, do not |
||
the socket is loose. |
|
use the product, as it may cause |
|
• Unplug the product during |
|
electric shock. Contact the |
|
installation, maintenance, |
|
authorized service before doing |
|
cleaning and repair. |
|
anything. |
|
Refrigerator / User Guide |
3 / 35 EN |
|
|
|
|
Safety and environment instructions
•Plug the product into an earthed socket. Earthing must be done by a qualified electrician.
•If the product has LED type lighting, contact the authorized service for replacing or in case of any problem.
•Do not touch frozen food with wet hands! It may adhere to your hands!
•Do not place liquids in bottles and cans into the freezer compartment. They may burst out!
•Place liquids in upright position after tightly closing the lid.
•Do not spray flammable substances near the product, as it may burn or explode.
•Do not keep flammable materials and products with flammable gas (sprays, etc.) in the refrigerator.
•Do not place containers holding liquids on top of the product. Splashing water on an electrified part may cause electric shock and risk of fire.
•Exposing the product to rain, snow, sunlight and wind will cause electrical danger. When relocating the product, do not pull by holding the door handle. The handle may come off.
•Take care to avoid trapping any part of your hands or body in any of the moving parts inside the product.
•Do not step or lean on the door, drawers and similar parts of the refrigerator. This will cause the product to fall down and cause damage to the parts.
•Take care not to trap the power cable.
1.1.1 HC warning
If the product comprises a cooling system using R600a gas, take care to avoid damaging the cooling system and its pipe while using and moving the product. This gas is flammable. If the cooling system is damaged, keep the product away from sources of fire and ventilate the room immediately.
The label on the inner Cleft side indicates the type of gas used in the
product.
|
4 / 35 EN |
Refrigerator / User Guide |
|
|
|
Safety and environment instructions
1.1.2 For models with water fountain
•In order for the water system inside the refrigerator to operate properly, pressure in the water mains must be
between 1-8 bars. A pressure regulator must be used if the pressure in the water mains is higher than 5 bars. If the
pressure in the mains is higher than 8 bars, the refrigerator must not be connected to the mains. If you are not sure about how to measure the water pressure, ask for professional help.
•Use drinking water only.
1.2.Intended use
•This product is designed for home use. It is not intended for commercial use.
•The product should be used to store food and beverages only.
•Do not keep sensitive products requiring controlled temperatures (vaccines, heat sensitive medication, medical supplies, etc.) in the refrigerator.
•The manufacturer assumes no responsibility for any damage due to misuse or mishandling.
•The product’s bench life is 10 years. The spare parts necessary for the product to function will be available for this period.
1.3.Child safety
•Keep packaging materials out of children’s reach.
•Do not allow the children to play with the product.
•If the product’s door comprises a lock, keep the key out of children’s reach.
1.4. Compliance with WEEE Directive and Disposing of the Waste Product
This product complies with EU WEEE Directive (2012/19/EU). This product bears a classification symbol for waste electrical and electronic equipment (WEEE).
This product has been manufactured
with high quality parts and materials which can be reused and are suitable for recycling. Do not dispose of the
waste product with normal domestic and other wastes at the end of its service life. Take it to the collection
center for the recycling of electrical and electronic equipment. Please consult your local authorities to learn about these collection centers.
1.5. Compliance with RoHS Directive
•This product complies with EU WEEE Directive (2011/65/EU). It does not contain harmful and prohibited materials specified in the Directive.
Refrigerator / User Guide |
5 / 35 EN |
|
|
|
|
Safety and environment instructions
1.6. Package information
•Packaging materials of the product are manufactured from recyclable materials in accordance with our National Environment Regulations. Do not dispose of the packaging materials together with the domestic or other wastes. Take them to the packaging material collection points designated by the local authorities.
|
6 / 35 EN |
Refrigerator / User Guide |
|
|
|
2 Refrigerator
1
*18
*17
*16
15 |
14
13
2 |
|
3 |
*4 |
5 |
*6 |
|
|
|
*7 |
*9 |
|
10 |
|
*11 |
*8 |
|
|
12 |
|
|
13 |
1- |
Freezer compartment |
10Odour filter |
2- |
Cooler compartment |
11Zero degree compartment |
3- |
Fan |
12Vegetable bins |
4- |
Butter-cheese compartment |
13Adjustable stands |
5- |
Glass shelves |
14Frozen food storing compartments |
6- Cooler compartment door shelves |
15Freezer compartment door shelves |
|
7- |
Minibar accessory |
16Icematics |
8- |
Water tank |
17Ice storage box |
9- |
Bottle shelf |
18- Ice-maker decorative lid |
*Optional
C*Optional: Figures in this user guide are schematic and may not be exactly match your product. If your product does not comprise the relevant parts, the information pertains to other models.
Refrigerator / User Guide |
7 / 35 EN |
|
|
|
|
3 Installation
3.1. Right place for installation
Contact the Authorized Service for the product's installation. To ready the product for installation, see the information in the user guide and make sure the electric and water utilities are as required. If not, call an electrician and plumber to arrange the utilities as necessary.
BWARNING: The manufacturer assumes no responsibility for any damage caused by the work carried out by unauthorized persons.
BWARNING: The product’s power cable must be unplugged during installation. Failure to do so may result in death or serious injuries!
WARNING: : If the door span is too Anarrow for the product to pass, remove
the door and turn the product sideways; if this does not work, contact the authorized service.
•Place the product on a flat surface to avoid vibration.
•Place the product at least 30 cm away from the heater, stove and similar sources of heat and at least 5 cm away from electric ovens.
•Do not expose the product to direct sunlight or keep in damp environments.
•The product requires adequate air circulation to function efficiently. If the product will be placed in an alcove, remember to leave at least 5 cm distance between the product and the ceiling and the walls.
•Do not install the product in environments with temperatures below -5°C.
3.2. Attaching the plastic wedges
Use the plastic wedges in the provided with the product to provide sufficient space for air circulation between the product and the wall.
1. To attach the wedges, remove the screws on the product and use the screws provided with the wedges.
2. Attach 2 plastic wedges on the ventilation cover shown as j in the figure.
|
8 / 35 EN |
Refrigerator / User Guide |
|
|
|
Installation
3.3. Adjusting the stands
If the product is not in balanced position, adjust the front adjustable stands by rotating right or left.
3.5. Water connection
(Optional)
AWARNING: Unplug the product and the water pump (if available) during connection.
The product’s water mains, filter and carboy connections must be rendered by authorizer service. The product can be connected to a carboy or directly to the water mains, depending on the model. To establish the connection, the water hose must first be connected to the product.
Check to see the following parts are supplied with your product’s model:
3.4. Power connection
AWARNING: Do not use extension or multi sockets in power connection.
BWARNING: Damaged power cable must be replaced by Authorized Service.
CWhen placing two coolers in adjacent position, leave at least 4 cm distance between the two units.
•Our firm will not assume responsibility for any damages due to usage without earthing and power connection in compliance with national regulations.
•The power cable plug must be easily accessible after installation.
•Connect the refrigerator to an earthed socket with 220-240V/50 Hz voltage. The plug must comprise a 10-16A fuse.
•Do not use multi-group plug with or without extension cable between the wall socket and the refrigerator.
1 |
2 |
|
3 |
4 |
*5 |
1.Connector (1 piece): Used to attach the water hose to the rear of the product.
2.Hose clip (3 pieces): Used to fix the water hose on the wall.
3.Water hose (1 piece, 5 meter diameter 1/4 inches): Used for the water connection.
4.Faucet adapter (1 piece): Comprises a porous filter, used for connection to the cold water mains.
5.Water filter (1 piece *Optional): Used to connect the mains water to the product. Water filter is not required if carboy connection is available.
Refrigerator / User Guide |
9 / 35 EN |
|
|
|
|
Installation
3.6. Connecting water hose to the product
To connect the water hose to the product, follow the instructions below.
1.Remove the connector on the hose nozzle adaptor in the back of the product and run the hose through the connector.
3.7. Connecting to water mains
(Optional)
To use the product by connecting to the cold water mains, a standard 1/2” valve connector must be installed to the cold water mains in your home. If the connector is not available or if you are unsure, consult a qualified plumber.
1.Detach the connector (1) from the faucet adaptor (2).
2. Push the water hose down tightly and connect |
3 |
2 |
1 |
to the hose nozzle adaptor. |
|
|
|
|
|
|
3.Tighten the connector manually to fix on the hose nozzle adaptor. You may also tighten the connector using a pipe wrench or pliers.
4.Connect the other end of the hose to the water mains (See Section 3.7) or, to use carboy, to the water pump (See Section 3.8).
2.Connect the faucet adaptor to the water mains valve.
3. Attach the connector around the water hose.
|
10 / 35 EN |
Refrigerator / User Guide |
|
|
|
Installation
4.Attach the connector into the faucet adaptor and tighten by hand / tool.
5.To avoid damaging, shifting or accidentally disconnecting the hose, use the clips provided to fix the water hose appropriately.
AWARNING: After turning the faucet on, make sure there is no water leak on either end of the water hose. In case of leakage, turn the valve off and tighten all connections using a pipe wrench or pliers.
3.8. For products using water carboy
(Optional)
To use a carboy for the product’s water connection, the water pump recommended by the authorized service must be used.
1.Connect one end of the water hose provided with the pump to the product (see 3.6) and follow the instructions below.
2.Connect the other end of the water hose to the water pump by pushing the hose into the pump’s hose inlet.
3.Place and fasten the pump hose inside the carboy.
4.Once the connection is established, plug in and start the water pump.
CPlease wait 2-3 minutes after starting the pump to achieve the desired efficiency.
CSee also the pump’s user guide for water connection.
CWhen using carboy, water filter is not required.
3.9 Water filter
(Optional)
The product may have internal or external filter, depending on the model. To attach the water filter, follow the instructions below.
Refrigerator / User Guide |
11 / 35 EN |
|
|
|
|
Installation
3.9.1.Fixing external filter on the wall (Optional)
AWARNING: Do not fix the filter on the product.
Check to see the following parts are supplied with your product’s model:
|
5 |
|
|
4 |
|
6 |
|
|
1 |
2 |
3 |
1.Connector (1 piece): Used to attach the water hose to the rear of the product.
2.Faucet adapter (1 piece): Used for connection to the cold water mains.
3.Porous filter (1 piece)
4.Hose clip (3 pieces): Used to fix the water hose on the wall.
5.Filter connecting apparatus (2 pieces): Used to fix the filter on the wall.
6.Water filter (1 piece): Used to connect the product to the water mains. Water filter is not necessary when using carboy connection.
1.Connect the faucet adaptor to the water mains valve.
2.Determine the location to fix the external filter. Fix the filter’s connecting apparatus (5) on the wall.
3.Attach the filter in upright position on the filter connecting apparatus, as indicated on the label. (6)
4.Attach the water hose extending from the top of the filter to the product’s water connection adaptor, (see 3.6.)
After the connection is established, it should look like the figure below.
|
12 / 35 EN |
Refrigerator / User Guide |
|
|
|
Installation
3.9.2.Internal filter
The internal filter provided with the product is not installed upon delivery; please follow the instructions below to install the filter.
1.“Ice Off” indicator must be active while installing the filter. Switch the ON-OFF indicator using the “Ice” button on the screen.
Water line: |
2. Remove the vegetable bin (a) to access the water filter.
Carboy line:
a |
CDo not use the first 10 glasses of water after connecting the filter.
Refrigerator / User Guide |
13 / 35 EN |
|
|
|
|
Installation
3. Remove the water filter by-pass cover by
pulling.
C
4.Place the water filter cover into the mechanism and push to lock in place.
5.Push the “Ice” button on the screen again to cancel the “Ice Off” mode.
C The water filter will clear certain foreign particles in the water. It will not clear the microorganisms in the water.
C See section 5.2 for activating the filter replacing period.
|
14 / 35 EN |
Refrigerator / User Guide |
|
|
|
4 Preparation
4.1. What to do for energy saving
AConnecting the product to electronic energy-saving systems is harmful, as it may damage the product.
•Do not keep the refrigerator doors open for long periods.
•Do not place hot food or beverages into the refrigerator.
•Do not overfill the refrigerator; blocking the internal air flow will reduce cooling capacity.
•The energy consumption value specified for the refrigerator was measured with the freezer compartment’s upper shelf removed, other shelves and the lowest drawers in place and under maximum load. The top glass shelf can be used, depending on the shape and size of food to be frozen.
•Depending on the product’s features; defrosting frozen foods in the cooler compartment will ensure energy saving and preserve food quality.
•The baskets/drawers that are provided with the chill compartment must always be in use for low energy consumption and for better storage conditions.
•Food contact with the temperature sensor in the freezer compartment may increase energy consumption of the appliance. Thus any contact with the sensor(s) must be avoided.
•Make sure the foods are not in contact with the cooler compartment temperature sensor described below.
4.2. First Use
Before using your refrigerator, make sure the necessary preparations are made in line with the instructions in “Safety and environment instructions” and “Installation” sections.
• Keep the product running with no food inside for 6 and do not open the door, unless
absolutely necessary.
C
C
C
Refrigerator / User Guide |
15 / 35 EN |
5 Using the product
5.1. Indicator panel
Indicator panels may vary depending on the model of your product.
Audial and visual functions of the indicator panel will assist in using the refrigerator.
8 |
|
|
|
|
1 |
|
2 |
|
|
|
|
3 |
|
|
|
|
|
|
|
|||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
9
7 |
6 |
5 |
4 |
1.Cooler compartment indicator
2.Error status indicator
3.Temperature indicator
4.Vacation function button
5.Temperature adjustment button
6.Compartment selection button
7.Cooler compartment indicator
8.Economy mode indicator
9.Vacation function indicator
*optional
C *Optional: The figures in this user guide are intended as drafts and may not perfectly match your product. If your product does not comprise the relevant parts, the information pertains to other models.
|
16 / 35 EN |
Refrigerator / User Guide |
|
|
|
Using the product
1. Cooler compartment indicator
The cooler compartment light will turn on when adjusting the cooler compartment temperature.
2. Error status indicator
This sensor will activate if the refrigerator is not cooling adequately or in case of sensor fault. When this indicator is active, the freezer compartment temperature indicator will display "E" and the cooler compartment temperature indicator will display "1, 2, 3..." etc. numbers. The numbers on the indicator serve to inform the service personnel about the fault.
3. Temperature indicator
Indicates the temperature of the freezer and cooler compartments.
4.Vacation function button
To activate this function, press and hold the Vacation button for 3 seconds. When the Vacation function is active, the cooler compartment temperature indicator displays the inscription
"- -" and no cooling process will be active in the cooling compartment. This function is not suitable to keep food in the cooler compartment. Other compartments will remain cooled with the
respective temperature set for each compartment.
Push the Vacation button ( 
) again to cancel this function.
5.Temperature adjustment button
Respective compartment's temperature varies in -24°C..... -18°C and 8°C...1°C ranges.
6.Compartment selection button
Use the refrigerator compartment selection button to toggle between the cooler and freezer compartments.
7. Cooler compartment indicator
The freezer compartment light will turn on when adjusting the cooler compartment temperature.
8. Economy mode indicator
Indicates the refrigerator is running on energysaving mode. This indicator will be active when the temperature in the freezer compartment is set to -18°C.
9.Vacation function indicator
Indicates the vacation function is active.
Refrigerator / User Guide |
17 / 35 EN |
|
|
|
|
Using the product
1 2
10 
3
|
|
|
|
|
|
|
|
|
|
|
|
9 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
8 |
|
7 |
6 |
5 |
4 |
|
|||
1- Economic use
2- High temperature / fault alert
3- Rapid cooling
4- Vacation function
5- Cooler compartment temperature setting
6- Energy saving (display off)
7- Keypad lock
8- Eco-fuzzy
9- Freezer compartment temperature setting
10Rapid freezing
*Optional: The figures in this user guide are intended as drafts and may not perfectly match C your product. If your product does not comprise the relevant parts, the information pertains
to other models.
|
|
|
|
18 / 35 EN |
Refrigerator / User Guide |
|
|
|
Using the product
1. Economic use
This sign will light up when the freezer compartment is set to -18°C', the most economical setting. (
) Economic use indicator will turn off when rapid cooling or rapid freezing function is selected.
2. High temperature / fault alert
This indicator (
) will light up in case of temperature faults or fault alerts. If you see this indicator is lit up, please see the "recommended solutions for problems" section in this guide.
3. Rapid cooling
When the rapid cooling function is turned on, the rapid cool indicator will light up (
) and the cooler compartment temperature indicator will display the value 1. Push the Rapid cool button again to cancel this function. The Rapid cool indicator will turn off and return to normal setting. The rapid cooling function will be automatically cancelled after 1 hour, unless cancelled by the user. Too cool a large amount of fresh food, press the rapid cool button before placing the food in the co-
oler compartment.
4. Vacation function
To activate the Vacation function, , press the quick fridge button (number 3)for 3 seconds; this will activate the vacation mode indicator (
). When the Vacation function is active, the cooler compartment temperature indicator displays
the inscription "- -" and no cooling process will be active in the cooling compartment. This
function is not suitable to keep food in the cooler compartment. Other compartments will remain cooled with the respective temperature set for each compartment. Push the vacation function button again to cancel this function.
5. Cooler compartment temperature setting
After pressing the button number (5), the cooler compartment temperature can be set to 8,7,6,5,4,3,2 and 1 respectively.(
)
6. Energy saving (display off)
Pressing this button (
) will light up the energysaving sign (
) and the Energy-saving function will activate. Activating the energy-saving function will turn off all other signs on the display. When the energy-saving function is active, pressing any button or opening the door will deactivate the energy-saving function and the display signals will return to normal. Pressing this button (
) again will turn off the energy-saving sign and deactivate the energy-saving function.
7. Keypad lock
Press the display off button (number 6), simultaneously for 3 seconds. The keypad lock sign will light up and the keypad lock will be activated; the buttons will be inactive when the Keypad lock is activated. Press the Display off button again simultaneously for 3 seconds. The keypad lock sign will turn off and the keypad lock mode will be disengaged. Press the Display off button to prevent changingthe refrigerator’s tempeture settings.
8. Eco-fuzzy
To activate the eco-fuzzy function, press and hold the eco-fuzzy button for 1 second. When this function is active, the freezer will switch to the economic mode after at least 6 hours and the economic use indicator will light up. To deactivate
the (
) eco-fuzzy function, press and hold the eco-fuzzy function button for 3 seconds.
The indicator will light up after 6 hours when the eco-fuzzy function is active.
9. Freezer compartment temperature setting
The temperature in the freezer compartment is adjustable. Pressing the button number (9) will enable the freezer compartment temperature to be set at -18,-19, -20, -21, -22, -23 and -24.
Refrigerator / User Guide |
19 / 35 EN |
|
|
|
|
Using the product
10. Rapid freezing
For rapid freezing, press the button number (10); this will activate the rapid freezing indicator (
).
When the rapid freezing function is turned on, the rapid freeze indicator will light up and the freezer compartment temperature indicator will display the value -27. Press the Rapid freeze button (
) again to cancel this function. The Rapid freeze indicator will turn off and return to normal setting. The rapid freezing function will be automatically cancelled after 24 hours, unless cancelled by the user. To freeze a large amount of fresh food, press the rapid freeze button before placing the food in the freezer compartment.
|
20 / 35 EN |
Refrigerator / User Guide |
|
|
|
Using the product
1 |
2 |
(*) *3 |
4
12 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
5 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||||
11 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
10 |
9 |
8 |
7 |
6 |
1.Freezer compartment temperature setting
2.Economy mode
3.Error status
4.Cooler compartment temperature setting
5.Rapid cooling
6.Vacation function
7.Keypad lock / filter replacing alert cancellation
8.Water, fragmented ice, ice cubes selection
9.Ice making on/off
10.Display on/off
11.Autoeco
12.Rapid freezing
*Optional: The figures in this user guide are intended as drafts and may not perfectly match C your product. If your product does not comprise the relevant parts, the information pertains
to other models.
Refrigerator / User Guide |
21 / 35 EN |
|
|
Using the product
1.Freezer compartment temperature setting
Pressing the button (
) number (1) will enable the freezer compartment temperature to be set at -18,-19,-20,-21 ,-22,-23,-24,-18...
2.Economy mode
Indicates the refrigerator is running on energysaving mode. This indicator will be active when the freezer compartment temperature is set at -18 or the energy-saving cooling is engaged by eco-extra function. (
)
3. Error status
This sensor will activate if the refrigerator is not cooling adequately or in case of sensor fault. (
)
When this indicator is activated, the freezer compartment temperature indicator will display "E" and the cooler compartment temperature indicator will display "1, 2, 3..." etc. numbers. The numbers on the indicator serve to inform the service personnel about the fault.
4. Cooler compartment temperature setting
After pressing the button (
) number (4), the cooler compartment temperature can be set to 8,7,6,5,4,3,2.. respectively.
5. Rapid cooling
For rapid cooling , press the button number (5); this will activate the rapid cooling indicator (
). Press this button again to deactivate this function.
Use this function when placing fresh foods into the cooler compartment or to rapidly cool the food items. When this function is activated, the refrigerator will be engaged for 1 hour.
6. Vacation function
When the Vacation function (
) is active, the cooler compartment temperature indicator displays the inscription "- -" and no cooling process
will be active in the cooling compartment. This function is not suitable to keep food in the cooler compartment. Other compartments will remain cooled with the respective temperature set for each compartment.
Press the vacation function button again to cancel this function. (
)
7. Keypad lock / Keypad lock / filter replacing alert cancellation
Press keypad lock button (
) to activate the keypad lock. You may also use this function to prevent changing the refrigerator's temperature settings. The refrigerator's filter must be replaced every 6 months. If you follow the instructions in the section 5.2, the refrigerator will automatically calculate the remaining period and the filter replacing alert indicator (
) will light up when filter expires.
Press and hold the button (
) for 3 seconds to turn off the filter alert light.
8.Water, fragmented ice, ice cubes selection
Navigate the water ( 
), ice cube (
) and fragmented ice 
) selections using the button number 8. The active indicator will remain lit.
9.Ice making on/off
Press the button ( |
) number (9) to cancel ( |
|
) or activate ( |
) ice-making. |
|
10. Display on/off |
|
|
Press the button ( |
|
) number (10) to |
cancel (XX) or activate ( |
) display on/ |
|
off. |
|
|
11. Autoeco |
|
|
Press the auto eco button ( |
), number (11), |
|
for 3 seconds to activate this function. If the door remains closed for a long time when this
function is activated, the cooler section will switch to economic mode. Press the button again to deactivate this function.
The indicator will light up after 6 hours when the auto eco function is active. (
)
12. Rapid freezing
Press the button (
) number (12) for rapid freezing. Press the button again to deactivate the function.
|
22 / 35 EN |
Refrigerator / User Guide |
|
|
|
Using the product
5.2. Activating water filter change warning
(For products connected to the mains water line and equipped with filter)
Water filter change warning is activated as follows: 1. Within 60 seconds after switching on the
refrigerator, press and hold the Display and Vacation buttons for 3 seconds.
2. |
A |
Then enter 1-4-5-3 as password. |
Confirming the entered |
Selecting the |
password |
password numbers |
4 |
2 |
|
3 |
||
|
||
|
1 |
Enter 1-4-5-3 as follows: Press FF set button for once. Press FRZ set button for once. Press FF set button for 4 times. Press FRZ set button for once. Press FF set button for 5 times. Press FRZ set button for once. Press FF set button for 3 times. Press FRZ set button for once.
If the password is entered correctly, buzzer will sound shortly and Filter Change Warning indicator will turn on. Automatic filter usage time calculation is not enabled ex factory.
It must be enabled in products equipped with a filter. The refrigerator will give filter change warning with 6-month intervals automatically.
If the same procedure is repeated when the automatic filter usage time calculation is enabled, then the function will be canceled.
Refrigerator / User Guide |
23 / 35 EN |
|
|
|
|
Using the product
5.3. Using the water fountain
(for certain models)
CThe first few glasses of water taken from the fountain will normally be warm.
CIf the water fountain is not used for a long time, dispose of the first few glasses of water to get clean water.
You must wait approximately 12 hours to get cold water after first operating.
Use the display to select the water option, then pull the trigger to get water. Remove the glass shortly after pulling the trigger.
5.4. Filling the fountain water tank
Open the water tank’s lid, as shown in the figure. Fill in pure and clean drinking water. Close the lid.
|
24 / 35 EN |
Refrigerator / User Guide |
|
|
|
Using the product
5.5. Cleaning the water tank
Remove the water filling reservoir inside the door shelf.
Detach by holding both sides of the door shelf.
Hold both sides of the water tank and remove at 45° angle.
Remove and clean the water tank lid.
Do not fill the water tank with fruit juice, fizzy beverages, alcoholic beverages or any other liquids incompatible for use in the water fountain. Using such liquids
Awill cause malfunction and irreparable damage in the water fountain. Using the fountain in this way is not within the
scope of warranty. Such certain chemicals and additives in the beverages / liquids may cause material damage to the water tank.
AThe water tank and water fountain components cannot be washed with dishwashers.
Refrigerator / User Guide |
25 / 35 EN |
|
|
|
|
Using the product
5.6. Taking ice / water
(Optional)
To take water (
) / ice cube (
) / fragmented ice ( 
), use the display to select the respective option. Take water/ice by pushing the trigger
on the water fountain forward. When switching between ice cube (
) / fragmented ice ( 
) options, the previous ice type may be discharged a few more times.
• You must wait approximately 12 hours before taking ice from the ice / water fountain for the first time. The fountain may not discharge ice if there is insufficient ice in the ice box.
• The 30 pieces of ice cubes (3-4 Litres) taken after first operating should not be used.
• In case of power blackout or temporary malfunction, the ice may partly melt and refreeze. This will cause the ice pieces to merge with each other. In case of extended power blackouts or malfunction, the ice may melt and leak out. If you experience this problem, remove the ice in the ice box and clean the
box.
A
•The product may not discharge water during first operation. This is caused by the air in the system. The air in the system must be
discharged. To do this, push the water fountain trigger for 1-2 minutes until the fountain discharges water. The initial water flow may be irregular. The water will flow normally once the air in the system is discharged.
•The water may be cloudy during first use of the filter; do not consume the first 10 glasses of water.
•You must wait approximately 12 hours to get cold water after first installation.
•The product’s water system is designed for clean water only. Do not use any other beverages.
•It is recommended to disconnect the water supply if the product will not be used for long periods during vacation etc.
•If the water fountain is not used for a long time, the first 1-2 glasses of water received may be warm.
5.7. Drip tray
(optional)
The water dripping from the water fountain accumulates on the drip tray; no water drainage is available. Pull the drip tray out or push on the edges to remove the tray. You may then discharge the water inside the drip tray.
|
26 / 35 EN |
Refrigerator / User Guide |
|
|
|
Using the product
5.8. Zero degree compartment
(Optional)
Use this compartment to keep delicatessen at lower temperatures or meat products for
immediate consumption. Do not place fruits and vegetables in this compartment. You can expand the product's internal volume by removing any of the zero degree compartments. To remove the
compartment, simply pull forth, lift up and pull out.
5.9. Vegetable bin
The refrigerator's vegetable bin is designed to keep vegetables fresh by preserving humidity. For this purpose, the overall cold air circulation is intensified in the vegetable bin. Keep fruits and vegetables in this compartment. Keep the greenleaved vegetables and fruits separately to prolong their life.
5.10. Blue light
(Optional)
The product's vegetable bins comprise blue light. The vegetables in the bin will continue
photosynthesize under the blue light's wavelength effect and remain live and fresh.
5.11.Ionizer
(Optional)
The ionizer system in the cooler compartment's air duct serves to ionize the air. The negative ion emissions will eliminate bacteria and other molecules causing odour in the air.
5.12.Minibar
(Optional)
The refrigerator's minibar door shelf can be accessed without opening the door. This will allow you to easily take frequently consumed food and beverages from the refrigerator. To open the minibar cover, push with your hand and pull
towards yourself.
A
To close this compartment, simply push forward from the upper section of the cover.
5.13.Odour filter
(optional)
The odour filter in the cooler compartment's air duct will prevent undesirable odour formation.
Refrigerator / User Guide |
27 / 35 EN |
|
|
|
|
Using the product
5.14.Icematic and ice storage box
(Optional)
Fill the icematic with water and put in place. The ice will be ready after approximately two hours. Do not remove the icematic to take the ice.
Turn the buttons on the ice chambers righthand side by 90°; the ice will fall to the ice storage box below. You may then remove the ice storage box and serve the ice.
C The ice storage box is intended for storing ice only. Do not fill with water. Doing so will cause it to break.
5.15.Ice-maker
(Optional)
Ice maker is located on the upper section of the freezer cover.
Hold the handles on the sides of the ice stock reservoir and move up to remove.
Remove the ice-maker decorative lid by moving up.
OPERATION
To remove the ice reservoir
Hold the ice stock reservoir from the handles, then move up and pull the ice stock reservoir. (Figure 1)
To reinstall the ice reservoir
Hold the ice stock reservoir from the handles, move up with an angle to fit the sides of the reservoir to their slot and make sure that the ice selector pin is mounted properly. (Figure 2)
Push downwards firmly, until there is no space left between the reservoir and the door plastic. (Figure 2)
|
28 / 35 EN |
Refrigerator / User Guide |
|
|
|
Using the product
If you have difficulty in refitting the reservoir, turn the rotary gear 90° and reinstall it as shown in the figure3. Any sound you hear when the ice drops into the reservoir is a part of normal operation.
When the ice dispenser does not work properly
If you do not remove ice cubes for a long time, they will cause formation of ice chunks. In this case, please remove the ice stock reservoir in accordance with the instructions given above, seperate the ice chunks, discard the inseparable ice and put the ice cubes back into the ice stock reservoir. (Figure 4)
When ice does not come out, check for any ice stuck in the canal and remove it. Regularly check the ice canal to clear the obstacles as shown in the figure 5. When using your refrigerator for the first time or when not using it for an extended period of time Ice cubes may be small due to air in the pipe after connection, any air will be purged during normal use.
Discard the ice produced for approximately one day since the water pipe may contain the contaminants.
Caution!
Do not insert the hand or any other object into the ice canal and blade since it may damage the parts or hurt the hand.
Do not let the children hang on the ice dispenser or the ice maker since it may cause an injury
To prevent dropping the ice stock reservoir use both hands when removing it.
If you close the door hard, it may cause water spilling over the ice stock reservoir.
Do not dismount the ice stock reservoir unless it is necessary.
Refrigerator / User Guide |
29 / 35 EN |
|
|
|
|
Loading...