Beko ASD241S, ASL141W, ASL141S, ASD241X, ASL141B User Manual

...
0 (0)

ASD241B

ASD241S

ASD241X

ASL141B

ASL141S

ASL141W

ASL141X

Please read this manual first!

Dear Customer,

We hope that your product, which has been produced in modern plants and checked under the most meticulous quality control procedures, will provide you with effective service.

For this, we recommend you to carefully read the entire manual of your product before using it and keep it at hand for future references.

The user manual will help you use the product in a fast and safe way.

Read the manual before installing and operating your product.

Follow the instructions, especially those for safety.

Keep the manual in an easily accessible place as you may need it later.

Besides, read also the other documents provided with your product.

Please note that this manual may be valid for other models as well.

Symbols and their descriptions

This instruction manual contains the following symbols:

C

Important information or useful usage

tips.

A Warning against dangerous conditions for life and property.

B Warning against electric voltage.

Packaging materials of the product are manufactured from recyclable materials in accordance with our National

Environment Regulations.

1

Important instructions for safety and

environment

3

2

Your refrigerator

6

 

 

3 Installation

7

3.1. Appropriate installation location . . . . . . . 7 3.2. Installing the plastic wedges . . . . . . . . . 7 3.3. Electrical connection . . . . . . . . . . . . . . . 8 3.4. Adjusting the feet . . . . . . . . . . . . . . . . . 8 3.5. Illumination lamp . . . . . . . . . . . . . . . . . .8 3.6. Door open warning . . . . . . . . . . . . . . . . 9 3.7. Transportation of the product. . . . . . . . . 9

4 Preparation

10

4.1. Things to be done for energy saving . . 10 4.2. Efficient operation . . . . . . . . . . . . . . . . 10

4.3. Recommendations on the fridge compartment . . . . . . . . . . . . . . . . . . . 10

4.4. Initial use . . . . . . . . . . . . . . . . . . . . . . 10

5 Operating the product

12

5.1. Indicator panel . . . . . . . . . . . . . . . . . . 12 5.2. Neo-Frost Cooling System . . . . . . . . . . 15 5.3. Freezing fresh food . . . . . . . . . . . . . . . 15

5.4. Recommendations for preserving the frozen food . . . . . . . . . . . . . . . . . . . . . . . . . . 16

5.5. Placing the food . . . . . . . . . . . . . . . . . 16 5.6. Deep-freeze information . . . . . . . . . . . 16 5.7. Icematic and ice storage container . . . 17 5.8. Ice making . . . . . . . . . . . . . . . . . . . . . 17 5.9. Chiller compartment . . . . . . . . . . . . . . 18

5.10.Butter & cheese section . . . . . . . . . . . 18 5.11. Egg section. . . . . . . . . . . . . . . . . . . . . 18 5.12. Crisper . . . . . . . . . . . . . . . . . . . . . . . . 18 5.13. Odour filter . . . . . . . . . . . . . . . . . . . . . 19 5.14. Drip tray . . . . . . . . . . . . . . . . . . . . . . . 19 5.15. Water Dispenser . . . . . . . . . . . . . . . . . 20

5.16.Using the water dispenser. . . . . . . . . . 20 5.17. Filling the water dispenser's tank. . . . . 20 5.18. Cleaning the water tank . . . . . . . . . . . 21

6

Maintenance and cleaning

22

6.1

Avoiding bad odours . . . . . . . . . . . . . .

22

6.2

Protecting the plastic surfaces . . . . . .

22

7

Troubleshooting

23

2 / 27 EN

Refrigerator / User Manual

1 Important instructions for safety and environment

Do not connect your appliance to the electricity supply until all packing and transit protectors have been removed.

If transported horizontally leave to stand upright for at least 4 hours before switching on to allow compressor oil to settle

If you are discarding an old refrigerator with a lock or latch fitted to the door, disable the lock/ latch, ensure that it is left in a safe condition to prevent the entrapment of young children.

This fridge/freezer must only be used for its intended purpose i.e the storing and freezing of edible foodstuff.

Do not dispose of the appliance on a fire. At BEKO, the care and protection of our

environment is an ongoing commitment. This appliance which is among the latest range introduced is particularly environment friendly. Your appliance contains non CFC / HFC natural substances in the cooling system (Called R600a) and in the insulation (Called cyclopentane) which are potentially flammable if exposed to fire. Therefore, take care not to damage, the cooling circuit / pipes of the appliance in transportation and in use. In case of damage do not expose the appliance to fire or potential ignition source and immediately ventilate the room where the appliance is situated.

We suggest you contact your local authority for disposal information and facilities available.

See Installation Instructions on page 8 for information on suitable location.

To obtain the best possible performance and trouble free operation from your appliance

it is very important to carefully read these instructions.

On delivery, check to make sure that the product is not damaged and that all the parts and accessories are in perfect condition.

Ensure that the plug remains readily accessible. Do not use multiple adapter or extension cable.

Failure to observe these instructions may invalidate your right to free service during the guarantee period.

Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction.

Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer.

Do not damage the refrigerant circuit.

Do not use electrical appliances inside the food storage compartments of the appliance,

unless they are of the type recommended by the manufacturer.

We suggest you keep these instructions in a safe place for easy reference.

This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.

Children should be supervised to ensure that they do not play with the appliance.

Electrical requirements

Before you insert the plug into the wall socket make sure that the voltage and the frequency shown on the rating plate inside the appliance corresponds to your electricity supply.

Rating label is on the left hand side of fridge inner liner.

Refrigerator / User Manual

3 / 27 EN

Important instructions for safety and environment

We recommend that this appliance be connected to the mains supply via a suitable switched and fused socket. The appliance must be positioned so that the plug is accessible.

Should the mains lead of the appliance become damaged or should it need Replacing at any time, it must be replaced by a special purpose made mains lead which can only be obtained from a BEKO authorised service agent.

Warning! This appliance must be earthed

If the fitted moulded plug is not suitable for your socket, then the plug should be cut off and an appropriate plug fitted. Destroy the old plug which is cut off as a plug with bared cord could cause a shock hazard if inserted into a socket elsewhere in the house.

The moulded plug on this appliance incorporates a 13 A fuse. Should the fuse need to be replaced an ASTABEAB approved BS 1362 fuse of the same rating must be used. Do not forget to refit the fuse cover. In the event of losing the fuse cover the plug must not be used until a replacement fuse cover has been fitted.

Colour of the replacement fuse cover must be the same colour as that visible on the pin face of the plug. Fuse covers are available from any good electrical store.

Important! Fitting A Different Plug

As the colours of the wires in the mains lead of this appliance may not correspond with the

coloured markings identifying the terminals in your plug proceed as follows: (See diagram).

1.Connect the green-yellow or green (Earth) wire to the terminal in the plug marked ‘E’ or with

the symbol or coloured green and yellow or green.

2.Connect the blue (Neutral) wire to the terminal in the plug marked ‘N’ or coloured black.

3.Connect the brown (Live) wire to the terminal in the plug marked ‘L’ or coloured red.

With alternative plugs a 13 A fuse must be fitted either in the plug or adaptor or in the main fuse box. If in doubt contact a qualified electrician.

GREEN &

 

6mm.

 

YELLOW

 

 

 

OR

 

L

 

GREEN

32mm.

 

 

 

BROWN

6mm.

N

 

OR

 

RED

 

 

22mm.

 

BLUE

 

 

12mm.

OR

6mm.

 

BLACK

 

CORD GRIP

FUSE

FITTED WITH 1362 13A FUSE ALWAYS BS 1362 REPLACEMENT CARTRIDGE FUSE

 

BS FIT

4 / 27 EN

Refrigerator / User Manual

Important instructions for safety and environment

Energy saving tips

1.Ensure your appliance is installed in a well ventilated area.

2.Ensure the time between buying chilled/frozen food and placing them in your appliance is kept at minimum, particularly in summer. We recommend you use a cool bag or a special carrier bag to carry perishable food.

3.Do not leave the door (s) of your appliance open longer than necessary and ensure they are closed properly after each opening.

4.Defrost frozen food in the fridge compartment, so that frozen food acts as an ice pack to assist cooling in the fridge.

5.Energy consumption of this appliance is measured while freezer compartment is loaded without use of top shelf lid and the drawers except the bottom drawer. It is advised that freezer compartment is loaded without use of drawers except the bottom drawer in order to achieve maximum loading capacity.

Compliance with rohs directive:

The product you have purchased complies with EU RoHS Directive (2011/65/EU). It does not contain harmful and prohibited materials specified in the Directive.

Package information

Packaging materials of the product are manufactured from recyclable materials in accordance with our National Environment

Regulations. Do not dispose of the packaging materials together with the domestic or other wastes. Take them to the packaging material collection points designated by the local authorities.

Compliance with WEEE Directive and Disposing of the Waste Product:

This product complies with EU WEEE Directive (2012/19/EU). This product bears a classification symbol for

waste electrical and electronic equipment (WEEE).This product has

been manufactured with high quality parts and materials which can be

reused and are suitable for recycling. Do not dispose of the waste product with normal domestic and other wastes at the end of its service life. Take it to the collection center for the recycling of electrical and electronic equipment. Please consult your local authorities to learn about these collection centers.

Refrigerator / User Manual

5 / 27 EN

Beko ASD241S, ASL141W, ASL141S, ASD241X, ASL141B User Manual

2 Your refrigerator

Congratulations on your choice of a BEKO quality Appliance which has been designed to give you service for many years.

1

2

 

 

3

*4

13

 

*6

 

5

 

*14

 

 

 

 

8

 

9

*7

 

 

12

10

 

 

 

11

 

11

1-

Freezer compartment

8-

Odour filter

2-

Fridge compartment

9-

Chiller compartment

3-

Fan

10Crisper compartment

4-

Butter-cheese compartments

11Adjustable feet

5-

Glass shelves

12Frozen food storage compartments

6- Fridge compartment door racks and egg

13Freezer compartment door racks

 

 

compartment

14Ice makers

7- Water dispenser tank

 

 

 

 

 

 

 

 

*Optional: Figures in this user manual are

schematic and may not match the product exactly. If

Cthe relevant parts are not available in the product you purchased, it applies to other models.

6 / 27 EN

Refrigerator / User Manual

3 Installation

Always have the repair procedures carried out by the Authorised Service Agent. Manufacturer shall not be held liable for damages that may arise from procedures carried out by unauthorised persons.

To make the product ready for use, make sure that the electricity installation is appropriate before calling the Authorised Service Agent. If not, call

a qualified electrician to have any necessary arrangements carried out.

C Preparation of the location and electrical installation at the place of installation is under customer's responsibility.

B Product must not be plugged in during installation. Otherwise, there is the risk of death or serious injury!

B WARNING: Manufacturer shall not be held liable for damages that may arise from procedures carried out by unauthorised persons.

A WARNING: Prior to installation, visually check if the product has any defects on it. If so, do not have it installed. Damaged products cause risks for your safety.

C Make sure that the power cable is not pinched or crushed while pushing the product into its place after installation or cleaning procedures.

3.1. Appropriate installation location

WARNING: If the door of the room where Athe product will be placed is too small for

the product to pass, then the product's doors can removed and the product turned aside to pass it through.

Choose a place at where you would use the product comfortably.

Install the product at least 30 cm away from heat sources such as hobs, ovens, heaters and stoves.Product must not be subjected to direct sun light and kept in humid places after installation.

Appropriate air ventilation must be provided around your product in order to achieve an efficient operation. If the product is to be placed in a recess in the wall, pay attention to leave at least 5 cm distance with the ceiling and side walls.

Do not place the product on the materials such as rugs or carpets.

Place the product on an even floor surface to prevent jolts.

Do not install the product in places where the temperature falls below 5°C.

C If two coolers are to be installed side by side, there should be at least 4 cm distance between them.

3.2. Installing the plastic wedges

Plastic wedges are used to create the distance for the air circulation between the product and the rear wall. Insert the 2 plastic wedges onto the rear ventilation cover as illustrated in the figure. To install the wedges, remove the screws on the product and use the screws given in the same pouch with the wedges.

Refrigerator / User Manual

7 / 27 EN

Installation

• The specified voltage must be equal to your mains voltage.

• Do not make connections via extension cables or multi-plugs.

B WARNING: Damaged power cable must

be replaced by the Authorised Service Agents.

B WARNING: If the product has a failure, it should not be operated unless it is

repaired by the Authorised Service Agent! There is the risk of electric shock!

3.3. Electrical connection

Connect the product to a grounded outlet protected by a fuse complying with the values in the rating plate. Our company shall not be liable for any damages that will arise when the product is used without grounding in accordance with the local regulations.

Electrical connection must comply with national regulations.

Power cable plug must be within easy reach after installation.

The voltage and allowed fuse or breaker protection are specified in the Rating Plate which is affixed to interior of the product. If the current value of the fuse or breaker in the house does not comply with the value in the

rating plate, have a qualified electrician install a suitable fuse.

3.4. Adjusting the feet

If the product stands unbalanced after installation adjust the feet. Taking help from someone to slightly lift the refrigerator will facilitate this process.

B WARNING: First unplug the product. Product must not be plugged in when adjusting the feet. There is the risk of electric shock!

Turn the front feet to balance the product. The corner where the foot exists is lowered when you turn in the direction of arrow and raised when you turn it in the opposite direction.

3.5. Illumination lamp

Do not attempt to repair yourself but call the Authorised Service Agent if the LED illumination lamps do not go on or are out of order.

8 / 27 EN

Refrigerator / User Manual

Loading...
+ 20 hidden pages