Behringer FCV100 User Manual

0 (0)
Behringer FCV100 User Manual

FCV100

User’s Manual

Version 1.2 July 2003

ENGLISH

FOOT CONTROLLER

FOOT CONTROLLER FCV100

Welcome to the BEHRINGER family!

Thank you for the confidence you have placed in us by purchasing the FOOT CONTROLLER FCV100.

The FCV100 is a valuable and versatile tool in your equipment. Its multiple functions give you the freedom to control even more parameters by simply using your foot on the pedal. You are able to control the volume or modulation of one stereo or two individual musical instruments. With your FCV100 you have a reliable tool that excels in both live and studio performances.

1. SAFETY PRECAUTIONS

Detailed safety precautions:

Please read all safety precautions and operating instructions before you attempt to operate the unit. Follow all safety precautions and keep operation instructions for future reference.

Damage:

Take care not to drop your FCV100 as this can lead to severe damage. BEHRINGER assumes no liability for any damage caused by the user.

Maintenance and care:

If the FCV100 is not used for more than three months, please remove the battery to avoid damage caused by battery leakage. The FCV100 will automatically turn on as soon as plugs are inserted into the inputs. To save battery power, remember to unplug the jacks when the unit is not being used.

For mains connection, use the correctly rated 12 V DC power adapter. A wrong power adapter may damage the unit.

Clean your FCV100 with a dry cloth. Avoid using volatile solvents as they may damage the surface.

21. SAFETY PRECAUTIONS

FOOT CONTROLLER FCV100

2. CONTROL ELEMENTS

Fig. 2.1: FCV100 controls (part 1)

By switching into “NORM” mode, the FCV100 is capable of controlling the volume of two individual musical instruments. Signals from INPUT 1/2 are led to OUTPUT 1/2. In “CV” mode the FCV100 can control modulation and volume levels of other musical instruments by connecting OUTPUT 2 to the volume or modulation input of the instrument. In “CV” mode, when OUTPUT 2 is in use, INPUT/OUTPUT 1 can still be used for controlling the volume of another instrument, similar to “NORM” mode. All connections are made with standard 1/4" TRS plugs.

In “NORM” mode, these jacks are used to feed separate instrument inputs with the FCV100’s input signal. If you only use OUTPUT 2 in “CV” mode, the FCV100 functions as a CV controller.

Turning the MIN VOL control fully clockwise will increase the volume at the minimum setting. This allows you to set the volume range.

You can set the volume level by either turning the volume level control or by pressing the pedal until you reach the desired volume level.

2. CONTROL ELEMENTS

3

Loading...
+ 5 hidden pages