Specifications
Version 1.0 December 2002
ENGLISH
ULTRA-DRIVE PRO DCX2496
ULTRA-DRIVE PRO DCX2496
ULTRA-DRIVE PRO
Ultra-high precision digital 24-Bit/96 kHz loudspeaker management system
DCX2496
s 3 analog inputs (one suitable as a digital stereo AES/EBU input) and 6 analog outputs for maximum flexibility
s High-end AKM® 24-Bit/96 kHz A/D and D/A converters for ultimate signal integrity and wide dynamic
range (112 dB)
s Integrated sample rate converter for easy connection of external digital signals with sampling rates from
32 to 96 kHz
s Precise dynamic EQs for level-dependent equalization and extremely musical parametric EQs, selectable
for all inputs and outputs
s Several types of EQs (LP/BP/HP) for each input and output
s Zero-attack limiters on all output channels for optimal signal protection
s Four different mono and stereo output operating modes
s Individual crossover filter types (Butterworth, Bessel and Linkwitz-Riley) with selectable roll-off characteristics
from 6 to 48 dB/octave
s Adjustable delays for all inputs and outputs allow manual or automatic correction for room temperature,
phase and arrival time differences
s Additional sum signal easily derived from the A/B/C inputs
s Future-proof ULTRA-DRIVE PRO software enables single or multi remote control via PC through RS-
232 and RS-485 interfaces (www.behringer.com)
s Link option via RS-485 network interface enables cascading of several ULTRA-DRIVE PROs
s 60 user-defined internal presets storable via PC software or on a PCMCIA card
s Open architecture assures easy software updates
s Ultra low-noise 4580 operational amplifiers for outstanding audio performance
s Servo-balanced, gold-plated XLR connectors for all inputs and outputs
s High-quality components and exceptionally rugged construction for long life and durability
s Internal switch-mode power supply for maximum flexibility (100 - 240 V~), noise-free audio, superior
transient response plus lowest possible power consumption
s Manufactured under ISO9000 certified management system
2
SPECIFICATIONS
ULTRA-DRIVE PRO DCX2496
ANALOG INPUTS (A, B, C)
Type electronically balanced
Connector XLR
Max. input level +22 dBu
Input impedance approx. 20 kΩ at 1 kHz
Crosstalk -72 dB @ 0 dBu In
DIGITAL INPUT (A)
Connector XLR
Format S/PDIF or AES/EBU
Input level 0.3 to 10 Vpp
Input impedance approx. 110 Ω
Sampling frequency 32 to 96 kHz
Special feature Sample Rate Converter
MICROPHONE INNPUT (C)
Type electronically balanced
Connector XLR
Max. input level -23 dBu
Input impedance approx. 470 Ω at 1 kHz
Phantom supply +15 V
ANALOG OUTPUTS (1, 2, 3, 4, 5, 6)
Type electronically balanced
Connector XLR
Max. output level +22 dBu
Output impedance approx. 160 Ω at 1 kHz
Crosstalk -100 dB @ 10 dBu In
SYSTEM DATA
Sampling frequency 96 kHz
Signal delay < 1 ms
Frequency response 10 Hz to 35 kHz (-1 dB) typ.
Dynamic range 109 dB
(analog input ß analog output)
Input noise -90 dBu (@ +22 dBu ß 112 dB)
Output noise -90 dBu (@ +22 dBu ß 112 dB)
THD+N Ratio 0,007 % @ 0 dBu In, Gain 1
CONVERTERS
A/D converter
Resolution 24-Bit Delta-Sigma AKM
Oversampling 64x
Dynamic range 112 dB typ.
D/A converter
Resolution 24-Bit Delta-Sigma AKM
Oversampling 64x
Dynamic range 112 dB typ.
SERIAL INTERFACE
RS-232
Type 9-pin sub-D connector
Transmission type 115200 bauds, 8 data bits,
Analog input to analog output
0,004 % @ 10 dBu In, Gain 1
®
®
1 stop bit, no parity
DIMENSIONS (H x W x D) 1 ¾" (44.5 mm) x 19" (482.6 mm)
x 8 ½" (217 mm)
WEIGHT approx. 3 kg
SHIPPING WEIGHT approx. 4.2 kg
RS-485 (2x)
Type RJ-45 connector
Transmission type 115200 bauds, 8 data bits,
1 stop bit, no parity
POWER SUPPLY
Mains voltage
USA/Canada 120 V ~, 60 Hz
U.K./Australia 240 V ~, 50 Hz
Europe 230 V ~, 50 Hz
General export model 100 - 240 V ~, 50 - 60 Hz
Power consumption approx. 12 W
Fuse 100 to 240 V ~: T 1 A H
Mains connector Standard IEC receptacle
BEHRINGER makes every effort to ensure the highest standard of quality. Necessary
modifications are carried out without notice. Thus, the specifications and design of the
device may differ from the information given in this manual.
3
ULTRA-DRIVE PRO DCX2496
The information contained in this manual is subject to change without notice. No part of this manual may be reproduced or
transmitted in any form or by any means, electronic or mechanical, including photocopying and recording of any kind, for any
BEHRINGER Spezielle Studiotechnik GmbH, Hanns-Martin-Schleyer-Str. 36-38, 47877 Willich-Münchheide II, Germany
purpose, without the express written permission of BEHRINGER Spezielle Studiotechnik GmbH.
BEHRINGER and ULTRA-DRIVE are registered trademarks. ALL RIGHTS RESERVED.
© 2002 BEHRINGER Spezielle Studiotechnik GmbH.
Tel. +49 (0) 21 54 / 92 06-0, Fax +49 (0) 21 54 / 92 06-30
4
Loading...