B&B Electronics GHOSTBRIDGE5 Quick Start Guide

5 (1)
B&B Electronics GHOSTBRIDGE5 Quick Start Guide

Product Overview

Front View

Back View

LED

Indicators

Mounting

Brackets

Bottom View

Main Ethernet Port

 

 

Secondary

 

 

 

Reset Switch

 

 

 

 

 

 

 

 

 

Ethernet Port

 

 

 

 

 

 

 

 

 

 

Base Stations or Nodes

GhostBridges operate in pairs. One is pre-configured as a Base and the other is preconfigured as a Node. They are labeled as such on the back of the unit.

It doesn’t matter which unit is connected to which side of the network. They operate automatically, and no configuration is necessary.

Optional Settings

GhostBridges require no configuration. But you can alter the settings if you wish.

Default Base IP Address = 192.168.1.50

Default Node IP Address = 192.168.1.51

Username/Password = admin/admin

1 Choose a PoE Injector

• For AC power use PoE

injector A.

PoE Injector A

For 24 VDC power use PoE injector B.

PoE Injector B

2Connect to Ethernet

1.Connect local network to PoE injector “LAN” port.

2.Connect PoE injector “PoE” port to GhostBridge “Main” port.

PoE Injector

GhostBridge5

To Network

 

Additional Devices

3 Mounting

GhostBridges can be pole mounted with the included cable ties or wall mounted with the optional GMT25 Wall Mount. Install them so that they face one another. Use the LED indicators to check for best signal strength.

4 LED Indicators

Power

Port 1 LED

Port 2 LED

Signal

Strength

Two Ethernet Ports

You can enable PoE pass-through for the GhostBridge’s secondary Ethernet port.

This will let you connect devices like cameras

to your network. The connection will be 24 VDC, non 802-3af.

Waterproof Your GhostBridges

Note that if your Cat5 cable doesn’t fit tightly in the cable door you should cover the gap with silicon tape to keep water out. B&B carries MOCAP silicon tape for this purpose.

(Part number IASFST)

Line of Sight Transmissions

Industrial installations will often include many reflective obstacles. Metal objects like storage tanks are the worst. Moving the GhostBridge even slightly can significantly increase the signal strength. Elevating your GhostBridges will also enhance signal strength.

Loading...
+ 1 hidden pages