Page 1
Owner’s Manual & Safety Instructions
Save This Manual%Keep this manual for the safety warnings and precautions, assembly,
operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
;6!%HI+
%65,"7%&'(%$*4.8"4,7%#'//&($%,$-%/(&9'4$#'//&($:.,(+&(2(*"3.$14&5
!"#"$%&'(%)*+#"$*%,$-%.$$/-00)))1.,(+&(2(*"3.$14&5
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
Copyright© 2017 by Harbor Freight Tools®. All rights reserved.
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Too l s r e q ui r e d f o r a s s em b l y a n d s e rv i c e m a y n o t b e i n c lu d e d.
1.5AH
;*,9%$."#%5,$*(",7%+*2&(*%'#"83%$."#%/(&9'4$1%
<,"7'(*%$&%9&%#&%4,8%(*#'7$%"8%#*("&'#%"8='(>1%
?@!6%ABC?%D@EF@G1
Page 2
Safety ......................................................... 2
Specifications ............................................. 7
Setup .......................................................... 7
?@<6AQ RS6;@ACRE D@CEA6E@ET6?6AFS
Operation .................................................... 8
A,+7*%&2%T&8$*8$#
Maintenance .............................................. 10
Parts List and Diagram .............................. 14
Warranty .................................................... 16
U@;ECEV%?QDWRG?%@EX%X6<CECACRE?
This is the safety alert symbol. It is used to alert you to potential
personal injury hazards. Obey all safety messages that
follow this symbol to avoid possible injury or death.
Indicates a hazardous situation which, if not avoided,
will result in death or serious injury.
Indicates a hazardous situation which, if not avoided,
could result in death or serious injury.
Indicates a hazardous situation which, if not avoided,
could result in minor or moderate injury.
Addresses practices not related to personal injury.
CDSR;A@EA%?@<6AQ%CE<R;D@ACRE
V*8*(,7%S&)*(%A&&7%?,2*$>%U,(8"83#
;*,9%,77%#,2*$>%),(8"83#%,89%,77%"8#$('4$"&8#1%%
Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.
?,Y*%,77%),(8"83#%,89%"8#$('4$"&8#%2&(%2'$'(*%(*2*(*84*1
The term ″power tool″ in the warnings refers to your battery-operated (cordless) power tool.
U&(Z%@(*,%?,2*$>
1. [**/%)&(Z%,(*,%47*,8%,89%)*77%7"$1%%
Cluttered or dark areas invite accidents.
2. X&%8&$%&/*(,$*%/&)*(%$&&7#%"8%*\/7&#"Y*%
,$5&#/.*(*#K%#'4.%,#%"8%$.*%/(*#*84*%&2%
27,55,+7*%7"J'"9#K%3,#*#%&(%9'#$1 Power tools
create sparks which may ignite the dust or fumes.
Page 2 <&(%$*4.8"4,7%J'*#$"&8#K%/7*,#*%4,77%HLMMMLMNNLOIPI1 Item 63528
3. [**/%4."79(*8%,89%+>#$,89*(#%
,),>%)."7*%&/*(,$"83%,%/&)*(%$&&71
Distractions can cause you to lose control.
Page 3
67*4$("4,7%?,2*$>
X&%8&$%*\/&#*%/&)*(%$&&7#%$&%(,"8%&(%)*$%4&89"$"&8#1
Water entering a power tool will increase the risk of electric shock.
S*(#&8,7%?,2*$>
1. ?$,>%,7*($K%),$4.%).,$%>&'%,(*%9&"83%
,89%'#*%4&55&8%#*8#*%).*8%&/*(,$"83%
,%/&)*(%$&&71%%X&%8&$%'#*%,%/&)*(%
$&&7%)."7*%>&'%,(*%$"(*9%&(%'89*(%$.*%
"827'*84*%&2%9('3#K%,74&.&7%&(%5*9"4,$"&81
A moment of inattention while operating power
tools may result in serious personal injury.
2. F#*%/*(#&8,7%/(&$*4$"Y*%*J'"/5*8$1%%
@7),>#%)*,(%*>*%/(&$*4$"&81 Protective
equipment such as dust mask, non-skid safety
shoes, hard hat, or hearing protection used for
appropriate conditions will reduce personal injuries.
3. S(*Y*8$%'8"8$*8$"&8,7%#$,($"831%
68#'(*%$.*%A("33*(%"#%"8%$.*%&22L/&#"$"&8%+*2&(*%
4&88*4$"83%$&%/&)*(%#&'(4*K%/"4Z"83%'/%&(%
4,((>"83%$.*%$&&71
Carrying power tools with your finger on
the Trigger or energizing power tools that
have the Trigger on invites accidents.
S&)*(%A&&7%F#*%,89%T,(*
1. X&%8&$%2&(4*%$.*%/&)*(%$&&71%%F#*%$.*%
4&((*4$%/&)*(%$&&7%2&(%>&'(%,//7"4,$"&81
The correct power tool will do the job better and
safer at the rate for which it was designed.
2. X&%8&$%'#*%$.*%/&)*(%$&&7%"2%$.*%A("33*(%%
9&*#%8&$%$'(8%"$%&8%,89%&221
Any power tool that cannot be controlled with the
Trigger is dangerous and must be repaired.
3. X"#4&88*4$%$.*%+,$$*(>%/,4Z%2(&5%$.*%
/&)*(%$&&7%+*2&(*%5,Z"83%,8>%,9='#$5*8$#K%
4.,83"83%,44*##&("*#K%&(%#$&("83%/&)*(%
$&&7#1 Such preventive safety measures reduce
the risk of starting the power tool accidentally.
4. ?$&(*%"97*%/&)*(%$&&7#%&'$%&2%$.*%(*,4.%&2%
4."79(*8%,89%9&%8&$%,77&)%/*(#&8#%'82,5"7",(%
)"$.%$.*%/&)*(%$&&7%&(%$.*#*%"8#$('4$"&8#%
$&%&/*(,$*%$.*%/&)*(%$&&71 Power tools are
dangerous in the hands of untrained users.
4. ;*5&Y*%,8>%,9='#$"83%Z*>%&(%)(*84.%
+*2&(*%$'(8"83%$.*%/&)*(%$&&7%&81
A wrench or a key left attached to a rotating part
of the power tool may result in personal injury.
5. X&%8&$%&Y*((*,4.1%%[**/%/(&/*(%2&&$"83%,89%
+,7,84*%,$%,77%$"5*#1 This enables better control
of the power tool in unexpected situations.
6. X(*##%/(&/*(7>1%%X&%8&$%)*,(%7&&#*%47&$."83%&(%
=*)*7(>1%%[**/%>&'(%.,"(K%47&$."83%,89%37&Y*#%
,),>%2(&5%5&Y"83%/,($#1 Loose clothes, jewelry
or long hair can be caught in moving parts.
7. C2%9*Y"4*#%,(*%/(&Y"9*9%2&(%$.*%4&88*4$"&8%&2%
9'#$%*\$(,4$"&8%,89%4&77*4$"&8%2,4"7"$"*#K%*8#'(*%
$.*#*%,(*%4&88*4$*9%,89%/(&/*(7>%'#*91 Use of
dust collection can reduce dust-related hazards.
8. R87>%'#*%#,2*$>%*J'"/5*8$%$.,$%.,#%+**8%
,//(&Y*9%+>%,8%,//(&/(",$*%#$,89,(9#%,3*84>1
Unapproved safety equipment may not provide
adequate protection. Eye protection must be
ANSI-approved and breathing protection
must be NIOSH-approved for the
specific hazards in the work area.
5. D,"8$,"8%/&)*(%$&&7#1%%T.*4Z%2&(%5"#,7"385*8$%
&(%+"89"83%&2%5&Y"83%/,($#K%+(*,Z,3*%&2%/,($#%
,89%,8>%&$.*(%4&89"$"&8%$.,$%5,>%,22*4$%$.*%
/&)*(%$&&7]#%&/*(,$"&81%%C2%9,5,3*9K%.,Y*%$.*%
/&)*(%$&&7%(*/,"(*9%+*2&(*%'#*1 Many accidents
are caused by poorly maintained power tools.
6. [**/%4'$$"83%$&&7#%#.,(/%,89%47*,81 Properly
maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
7. F#*%$.*%/&)*(%$&&7K%,44*##&("*#%,89%$&&7%+"$#%
*$41%"8%,44&(9,84*%)"$.%$.*#*%"8#$('4$"&8#K%
$,Z"83%"8$&%,44&'8$%$.*%)&(Z"83%4&89"$"&8#%
,89%$.*%)&(Z%$&%+*%/*(2&(5*91 Use of the
power tool for operations different from those
intended could result in a hazardous situation.
?@<6AQRS6;@ACRED@CEA6E@ET6 ?6AFS
Page 3<&(%$*4.8"4,7%J'*#$"&8#K%/7*,#*%4,77%HLMMMLMNNLOIPI1Item 63528
Page 4
W,$$*(>%$&&7%'#*%,89%4,(*
1. ;*4.,(3*%&87>%)"$.%$.*%4.,(3*(%#/*4"2"*9%+>%
$.*%5,8'2,4$'(*(1 A charger that is suitable
for one type of battery pack may create a risk
?@<6AQ RS6;@ACRE D@CEA6E@ET6?6AFS
of fire when used with another battery pack.
2. F#*%/&)*(%$&&7#%&87>%)"$.%#/*4"2"4,77>%
9*#"38,$*9%+,$$*(>%/,4Z#1 Use of any other
battery packs may create a risk of injury and fire.
3. U.*8%+,$$*(>%/,4Z%"#%8&$%"8%'#*K%Z**/%"$%,),>%
2(&5%&$.*(%5*$,7%&+=*4$#K%7"Z*%/,/*(%47"/#K%
4&"8#K%Z*>#K%8,"7#K%#4(*)#%&(%&$.*(%#5,77%5*$,7%
&+=*4$#K%$.,$%4,8%5,Z*%,%4&88*4$"&8%2(&5%
&8*%$*(5"8,7%$&%,8&$.*(1%Shorting the battery
terminals together may cause burns or a fire.
4. F89*(%,+'#"Y*%4&89"$"&8#K%7"J'"9%5,>%+*%
*=*4$*9%2(&5%$.*%+,$$*(>^%,Y&"9%4&8$,4$1%
C2%4&8$,4$%,44"9*8$,77>%&44'(#K%27'#.%)"$.%),$*(1%
C2%7"J'"9%4&8$,4$#%*>*#K%,99"$"&8,77>%#**Z%
5*9"4,7%.*7/1%Liquid ejected from the
battery may cause irritation or burns.
?*(Y"4*
B,Y*%>&'(%/&)*(%$&&7%#*(Y"4*9%+>%,%J',7"2"*9%(*/,"(%/*(#&8%'#"83%&87>%"9*8$"4,7%(*/7,4*5*8$%/,($#1%
This will ensure that the safety of the power tool is maintained.
C5/,4$%X("Y*(%?,2*$>%U,(8"83#
1. B&79%/&)*(%$&&7#%+>%"8#'7,$*9%3("//"83%#'(2,4*#%
).*8%/*(2&(5"83%,8%&/*(,$"&8%).*(*%$.*%4'$$"83%
$&&7%5,>%4&8$,4$%."99*8%)"("83%&(%"$#%&)8%4&(91
Contact with a ″live″ wire will make exposed metal
parts of the tool ″live″ and shock the operator.
2. Maintain labels and nameplates on the tool.
These carry important safety information.
If unreadable or missing, contact
Harbor Freight Tools for a replacement.
3. Avoid unintentional starting.
Prepare to begin work before turning on the tool.
4. Do not lay the tool down until it has come to
a complete stop. Moving parts can grab the
surface and pull the tool out of your control.
5. When using a handheld power tool,
maintain a firm grip on the tool with both
hands to resist starting torque.
6. Do not leave the tool unattended when the
Battery Pack is connected. Turn off the tool,
and remove the Battery Pack before leaving.
7. The battery Charger gets hot during
use. The Charger’s heat can build up to
unsafe levels and create a fire hazard if
it does not receive adequate ventilation,
due to an electrical fault, or if it is used in a
hot environment.
Do not place the Charger on a flammable surface.
Do not obstruct any vents on the Charger.
6#/*4",77>%,Y&"9%/7,4"83%$.*%T.,(3*(%&8%4,(/*$#%
,89%('3#^%$.*>%,(*%8&$%&87>%27,55,+7*K%+'$%$.*>%
,7#&%&+#$('4$%Y*8$#%'89*(%$.*%T.,(3*(1%
Place the Charger on a stable, solid, nonflammable
surface (such as a stable metal workbench or
concrete floor) at least 1 foot away from all
flammable objects, such as drapes or walls. Keep
a fire extinguisher and a smoke detector in the
area. Frequently monitor the Charger and
Battery Pack while charging.
8. This product is not a toy.
Keep it out of reach of children.
9. People with pacemakers should consult their
physician(s) before use. Electromagnetic fields in
close proximity to heart pacemaker could cause
pacemaker interference or pacemaker failure.
10. WARNING: The cord of this product contains
lead and/or di (2-ethylhexyl) phthalate
(DEHP), chemicals known to the State
of California to cause cancer, and birth
defects or other reproductive harm. Wash
hands after handling. (California Health
& Safety Code § 25249.5, et seq.)
11. The warnings, precautions, and instructions
discussed in this instruction manual cannot
cover all possible conditions and situations
that may occur. It must be understood by the
operator that common sense and caution are
factors which cannot be built into this product,
but must be supplied by the operator.
Page 4 <&(%$*4.8"4,7%J'*#$"&8#K%/7*,#*%4,77%HLMMMLMNNLOIPI1 Item 63528
Page 5
G"$."'5%W,$$*(>%?,2*$>%U,(8"83#
GCABCFD%W@AA6;C6?%?AR;6%
@%G@;V6%@DRFEA%R<%6E6;VQ%@EX%%
UCGG%!6EA%<C;6%R;%6_SGRX6%C<%DC?A;6@A6X-
1. [**/%W,$$*(>%S,4Z%9(>1
2. XR%ERA%XR%@EQ%R<%AB6%<RGGRUCEV%
AR%AB6%W@AA6;Q%S@T[-
a. R/*8K
b. X(&/K
c. ?.&($L4"(4'"$K
d. S'84$'(*K
!"+(,$"&8%?,2*$>
This tool vibrates during use.
Repeated or long-term exposure to vibration may
cause temporary or permanent physical injury,
particularly to the hands, arms and shoulders.
To reduce the risk of vibration-related injury:
1. Anyone using vibrating tools regularly or for
an extended period should first be examined
by a doctor and then have regular medical
check-ups to ensure medical problems are not
being caused or worsened from use. Pregnant
women or people who have impaired blood
circulation to the hand, past hand injuries,
nervous system disorders, diabetes, or
Raynaud’s Disease should not use this tool.
If you feel any symptoms related to vibration (such
as tingling, numbness, and white or blue fingers),
seek medical advice as soon as possible.
%?@!6%AB6?6%CE?A;FTACRE?1
e. C84"8*(,$*K%&(
f. 6\/&#*%$&%$*5/*(,$'(*#%3(*,$*(%$.,8%H`ab<1
3. Charge Battery Pack only according
to its Charger’s instructions.
4. Inspect Battery Pack before every use;
do not use or charge if damaged.
2. Do not smoke during use. Nicotine reduces
the blood supply to the hands and fingers,
increasing the risk of vibration-related injury.
3. Wear suitable gloves to reduce the
vibration effects on the user.
4. Use tools with the lowest vibration
when there is a choice.
5. Include vibration-free periods each day of work.
6. Grip tool as lightly as possible (while still keeping
safe control of it). Let the tool do the work.
7. To reduce vibration, maintain the tool as
explained in this manual. If any abnormal
vibration occurs, stop use immediately.
?@<6AQRS6;@ACRED@CEA6E@ET6 ?6AFS
Page 5<&(%$*4.8"4,7%J'*#$"&8#K%/7*,#*%4,77%HLMMMLMNNLOIPI1Item 63528
Page 6
V(&'89"83
?@<6AQ RS6;@ACRE D@CEA6E@ET6?6AFS
+*2&(*%'#*1%%C2%$.*%/7'3%)"77%8&$%2"$%$.*%&'$7*$K%.,Y*%,%/(&/*(%&'$7*$%"8#$,77*9%+>%,%J',7"2"*9%*7*4$("4",81
AR%S;6!6EA%6G6TA;CT%?BRT[%@EX%X6@AB%<;RD%CETR;;6TA%V;RFEXCEV-%
T.*4Z%)"$.%,%J',7"2"*9%*7*4$("4",8%"2%>&'%,(*%"8%9&'+$%,#%$&%).*$.*(%$.*%&'$7*$%"#%/(&/*(7>%
3(&'89*91%%X&%8&$%5&9"2>%$.*%/&)*(%4&(9%/7'3%/(&Y"9*9%)"$.%$.*%4.,(3*(1%%X&%8&$%'#*%$.*%
4.,(3*(%"2%$.*%/&)*(%4&(9%&(%/7'3%"#%9,5,3*91%%C2%9,5,3*9K%.,Y*%"$%(*/,"(*9%+>%,%#*(Y"4*%2,4"7"$>%
6\$*8#"&8%T&(9#
E&$*- Extension cords must not be used with this item’s Charger.
?>5+&7&3>
WARNING marking concerning
Risk of Hearing Loss.
Wear hearing protection.
WARNING marking
concerning Risk of Fire.
Do not cover Charger
ventilation ducts.
Charge on fireproof surface only.
WARNING marking concerning
Risk of Electric Shock.
Properly connect Charger’s power
cord to appropriate outlet.
WARNING marking concerning
Risk of Explosion.
Do not puncture, short, or open
battery packs and do not charge
damaged battery packs.
!
c
@
n0 xxxx/min.
Double Insulated
Canadian Standards Association
Underwriters Laboratories, Inc.
Volts
Alternating Current
Amperes
No Load Revolutions
per Minute (RPM)
WARNING marking concerning Risk
of Eye Injury. Wear ANSI-approved
safety goggles with side shields.
Read the manual before
set-up and/or use.
Page 6 <&(%$*4.8"4,7%J'*#$"&8#K%/7*,#*%4,77%HLMMMLMNNLOIPI1 Item 63528
Page 7
?/*4"2"4,$"&8#
Battery Rating 20 V / 1.5 Ah
Battery Type Li-ion
Impact Rate 0 – 3300 BPM
Maximum Torque 1300 in-lb.
Chuck Size 1/4" Hex
?*$'/%L%W*2&(*%F#*-
% ;*,9%$.*%6EAC;6%CDSR;A@EA%?@<6AQ%CE<R;D@ACRE%#*4$"&8%,$%$.*%+*3"88"83%&2%$."#%
5,8',7%"847'9"83%,77%$*\$%'89*(%#'+.*,9"83#%$.*(*"8%+*2&(*%#*$%'/%&(%'#*%&2%$."#%/(&9'4$1
E&$*- For additional information regarding the parts listed in the
following pages, refer to Parts List and Diagram on page 14.
<'84$"&8#
U&(Z%
G"3.$
T.'4Z
?@<6AQRS6;@ACRED@CEA6E@ET6 ?6AFS
U&(Z%
G"3.$
W,$$*(>
A("33*(
X"(*4$"&8%
?)"$4.
1.5AH
Page 7<&(%$*4.8"4,7%J'*#$"&8#K%/7*,#*%4,77%HLMMMLMNNLOIPI1Item 63528
Page 8
R/*(,$"83%C8#$('4$"&8#
% ;*,9%$.*%6EAC;6%CDSR;A@EA%?@<6AQ%CE<R;D@ACRE%#*4$"&8%,$%$.*%+*3"88"83%&2%$."#%
5,8',7%"847'9"83%,77%$*\$%'89*(%#'+.*,9"83#%$.*(*"8%+*2&(*%#*$%'/%&(%'#*%&2%$."#%/(&9'4$1
?@<6AQ RS6;@ACRE D@CEA6E@ET6?6AFS
A&&7%?*$%F/
AR%S;6!6EA%?6;CRF?%CEdF;Q%<;RD%@TTCX6EA@G%RS6;@ACRE-%
D,Z*%#'(*%$.,$%$.*%A("33*(%"#%"8%$.*%&22L/&#"$"&8%,89%(*5&Y*%"$#%W,$$*(>%
S,4Z%+*2&(*%/*(2&(5"83%,8>%/(&4*9'(*%"8%$."#%#*4$"&81
W,$$*(>%T.,(3"83
Charge battery after unpacking and before using this tool. Follow instructions included with battery charger.
@$$,4."830;*5&Y"83%@44*##&("*#
T@FACREe Only use 1/4" hex shank bits
designed for impact use. Verify bit fits
the Chuck precisely before use.
1. Pull Collar forward and insert an appropriate
impact-rated accessory (sold separately) into the
hex drive Chuck. Pull on bit to ensure it is secure.
2. To remove, pull Collar forward, remove bit
from Chuck and then release Collar.
@$$,4."83%W*7$%T7"/
Attach Belt Clip to Handle using supplied Screw. Clip
may be attached to either side.
T&77,(
?4(*)
W*7$%T7"/
U&(Z/"*4*%,89%U&(Z%@(*,%?*$%F/
1. Designate a work area that is clean and well lit.
The work area must not allow access by children
or pets to prevent distraction and injury.
Page 8 <&(%$*4.8"4,7%J'*#$"&8#K%/7*,#*%4,77%HLMMMLMNNLOIPI1 Item 63528
2. Secure loose workpieces using a vise or clamps
(not included) to prevent movement while working.
3. There must not be objects, such as utility lines,
nearby that will present a hazard while working.
Page 9
V*8*(,7%R/*(,$"83%C8#$('4$"&8#
1. Make sure that the Trigger is in the
off-position, then attach the Battery Pack.
2. Insert an appropriate impact-rated accessory
(sold separately) into the driver.
3. Set Direction Switch.
<&(),(9- Push Switch in on right side
(arrow pointing forward) for clockwise rotation.
;*Y*(#*- Push Switch in on left
side (arrow pointing backward) for
counter-clockwise rotation.
A("33*(%G&4Z- Push Switch to the
center to lock the Trigger.
T@FACREe%%?*$%X"(*4$"&8%?)"$4.%$&%4*8$*(%
A("33*(%G&4Z%/&#"$"&8%9'("83%#*$%'/K%).*8%
4.,83"83%+"$#%&(%).*8%$&&7%"#%"97*1%%
S'#.%%
2&(%
<&(),(9
S'#.%$&%T*8$*(%$&%
GRT[%A;CVV6;
S'#.%%
2&(%
;*Y*(#*
4. Install bit and select direction of rotation.
ERACT6-%X&%8&$%4.,83*%9"(*4$"&8%&2%(&$,$"&8%
)."7*%T.'4Z%"#%(&$,$"831 Wait until Chuck has come
to a complete stop before changing direction.
5. Press Trigger to start the tool. The Work Lights
will turn on when Trigger is pressed and turn
off a few seconds after Trigger is released.
6. The tool has variable speed. To increase
speed, apply more pressure to Trigger. To
decrease speed, lessen pressure on Trigger.
7. Tighten or loosen the fastener(s) as required.
E&$*- The amount of actual torque will vary depending
on the cleanness and condition of the threads and
other factors. If tightening critical components,
chase threads before assembling components and
check the actual torque applied to the fastener
with a mechanical torque wrench (not supplied).
8. When finished using the Impact Driver, release
Trigger and center Direction Switch to lock Trigger.
9. To prevent accidents, turn off the tool and
remove its Battery Pack after use. Clean, then
store the tool indoors out of children’s reach.
?@<6AQRS6;@ACRED@CEA6E@ET6 ?6AFS
Page 9<&(%$*4.8"4,7%J'*#$"&8#K%/7*,#*%4,77%HLMMMLMNNLOIPI1Item 63528
Page 10
D,"8$*8,84*%,89%?*(Y"4"83
%S(&4*9'(*#%8&$%#/*4"2"4,77>%*\/7,"8*9%"8%$."#%5,8',7%5'#$%
+*%/*(2&(5*9%&87>%+>%,%J',7"2"*9%$*4.8"4",81
?@<6AQ RS6;@ACRE D@CEA6E@ET6?6AFS
AR%S;6!6EA%?6;CRF?%CEdF;Q%<;RD%@TTCX6EA@G%RS6;@ACRE-%
D,Z*%#'(*%$.,$%$.*%A("33*(%"#%"8%$.*%&22L/&#"$"&8%,89%(*5&Y*%"$#%W,$$*(>%
S,4Z%+*2&(*%/*(2&(5"83%,8>%/(&4*9'(*%"8%$."#%#*4$"&81
AR%S;6!6EA%?6;CRF?%CEdF;Q%<;RD%ARRG%<@CGF;6-%
X&%8&$%'#*%9,5,3*9%*J'"/5*8$1%%C2%,+8&(5,7%8&"#*%&(%Y"+(,$"&8%
&44'(#K%.,Y*%$.*%/(&+7*5%4&((*4$*9%+*2&(*%2'($.*(%'#*1
T7*,8"83K%D,"8$*8,84*K%,89%G'+("4,$"&8
1. W6<R;6%6@TB%F?6K inspect the general
condition of the tool. Check for:
• leaking, swollen, or cracked battery pack
• loose hardware
• misalignment or binding of moving parts
• cracked or broken parts
• any other condition that may
affect its safe operation.
2. @<A6;%F?6K wipe external surfaces
of the tool with clean cloth.
3. Disconnect battery pack and store battery pack,
charger, and tool in dry, indoor area out of
reach of children and away from metal objects
(i.e., paperclips, coins) to prevent shorting.
Page 10 <&(%$*4.8"4,7%J'*#$"&8#K%/7*,#*%4,77%HLMMMLMNNLOIPI1 Item 63528
Page 11
A(&'+7*#.&&$"83
S(&+7*5 S&##"+7*%T,'#*# G"Z*7>%?&7'$"&8#
Tool will not start. 1. Battery Pack not properly
Tool operates
slowly.
Performance
decreases
over time.
Excessive noise
or rattling.
Overheating. 1. Forcing tool to work too fast.
<&77&)%,77%#,2*$>%/(*4,'$"&8#%).*8*Y*(%9",38&#"83%&(%#*(Y"4"83%$.*%$&&71%%%
%
X"#4&88*4$%W,$$*(>%S,4Z%,89%T.,(3*(%/&)*(%#'//7>%+*2&(*%#*(Y"4*1
connected.
2. Battery Pack not
properly charged.
3. Battery Pack worn out.
4. Internal damage or wear.
(Carbon brushes or
Trigger, for example.)
1. Forcing tool to work too fast.
2. Battery Pack wearing out.
Carbon brushes worn or damaged. Have qualified technician replace brushes.
Internal damage or wear. (Carbon
brushes or bearings, for example.)
2. Blocked motor housing vents.
1. Remove Battery Pack, make sure there are no obstructions,
clean battery contacts on tool, reinsert the Battery Pack
according to its shape (it should only fit one way), and
press firmly until the Battery Pack locks in place.
2. Make sure Charger is connected and operating properly.
Give enough time for Battery Pack to recharge properly.
3. Dispose of old Battery Pack properly or recycle.
Replace Battery Pack.
4. Have technician service tool.
1. Allow tool to work at its own rate.
2. Dispose of old Battery Pack properly or recycle.
Replace Battery Pack.
Have technician service tool.
1. Allow tool to work at its own rate.
2. Wear ANSI-approved safety goggles and
NIOSH-approved dust mask/respirator while blowing
dust out of motor using compressed air.
?@<6AQRS6;@ACRED@CEA6E@ET6 ?6AFS
Page 11<&(%$*4.8"4,7%J'*#$"&8#K%/7*,#*%4,77%HLMMMLMNNLOIPI1Item 63528
Page 12
SG6@?6%;6@X%AB6%<RGGRUCEV%T@;6<FGGQ
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM
IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR
MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS
QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE
?@<6AQ RS6;@ACRE D@CEA6E@ET6?6AFS
ANY PARTS OF THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY
STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND
LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY
ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS
THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.
Page 12 <&(%$*4.8"4,7%J'*#$"&8#K%/7*,#*%4,77%HLMMMLMNNLOIPI1 Item 63528
Page 13
;*4&(9%S(&9'4$]#%?*(",7%E'5+*(%B*(*-%
E&$*-%C2%/(&9'4$%.,#%8&%#*(",7%8'5+*(K%(*4&(9%5&8$.%,89%>*,(%&2%/'(4.,#*%"8#$*,91
E&$*- Some parts are listed and shown for illustration purposes only,
and are not available individually as replacement parts.
?@<6AQRS6;@ACRED@CEA6E@ET6 ?6AFS
Page 13<&(%$*4.8"4,7%J'*#$"&8#K%/7*,#*%4,77%HLMMMLMNNLOIPI1Item 63528
Page 14
S,($#%G"#$%,89%X",3(,5
S,($#%G"#$
?@<6AQ RS6;@ACRE D@CEA6E@ET6?6AFS
S,($ X*#4("/$"&8 f$>
1 Shield 1
2 Screw 3
3 Screw 4
4 Spring Washer 4
5 Transparent Cover 1
6 LED Circuit Board 1
7 Jump Ring 1
8 Spacer 1
9 Spring 1
10 Collar 1
11 Aluminum Shell 1
12 Shaft Sleeve 1
13 Steel Ball 3
14 Spacer 1
15 Output Shaft 1
16 Steel Ball 2
17 Impact Block 1
18 Steel Ball 20
19 Spacer 1
20 Inner Gear Ring 1
21 Spring 1
S,($ X*#4("/$"&8 f$>
22 Main Shaft 1
23 Planetary Gear 3
24 Pin 3
25 Spacer 1
26 Bearing 1
27 Rear Motor Cover 1
28 Screw 2
29 Motor Gear 1
30 Motor 1
31 Rear Block 1
32 Push Rod 1
33 Housing 1
34 Screw 9
35 20 V Battery Pack 1
36 Battery Terminal 1
37 Switch Assembly 1
38 Nameplate 1
39 Belt Clip 1
40 Screw 1
41 20 V Charger (not shown) 1
Page 14 <&(%$*4.8"4,7%J'*#$"&8#K%/7*,#*%4,77%HLMMMLMNNLOIPI1 Item 63528
Page 15
@##*5+7>%X",3(,5
?@<6AQRS6;@ACRED@CEA6E@ET6 ?6AFS
Page 15<&(%$*4.8"4,7%J'*#$"&8#K%/7*,#*%4,77%HLMMMLMNNLOIPI1Item 63528
Page 16
G"5"$*9%Pa%X,>%U,((,8$>
Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability
standards, and warrants to the original purchaser that this product is free from defects in materials
and workmanship for the period of 90 days from the date of purchase. This warranty does not apply to
damage due directly or indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside
our facilities, criminal activity, improper installation, normal wear and tear, or to lack of maintenance.
We shall in no event be liable for death, injuries to persons or property, or for incidental, contingent,
special or consequential damages arising from the use of our product. Some states do not allow the
exclusion or limitation of incidental or consequential damages, so the above limitation of exclusion
may not apply to you. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES,
EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS.
To take advantage of this warranty, the product or part must be returned to us with transportation charges
prepaid. Proof of purchase date and an explanation of the complaint must accompany the merchandise.
If our inspection verifies the defect, we will either repair or replace the product at our election or we may
elect to refund the purchase price if we cannot readily and quickly provide you with a replacement. We will
return repaired products at our expense, but if we determine there is no defect, or that the defect resulted
from causes not within the scope of our warranty, then you must bear the cost of returning the product.
This warranty gives you specific legal rights and you may also have other rights which vary from state to state.
g`PH%D"##"&8%R,Z#%W7Y91%%h%%SR%W&\%NaaP%%h%%T,5,("77&K%T@%PgaHH%%h%%HLMMMLMNNLOIPI
Loading...