Babyletto Bowery Bassinet Crib User Manual

Bowery Bassinet (0513) - Assembly and Operation Manual

Congratulations on purchasing a MDB Family product. This cradle will provide many years of service if
you adhere to the following guidelines for assembly, maintenance, and operation. This cradle is for resi­dential use only. Any institutional use is strictly prohibited.

Please be sure to follow the instructions for proper assembly. Use a Phillips head screwdriver for assem­bling the cradle in addition to the Allen wrench included in the hardware box. Do not use power screwdriv­ers. All of our cradles are made from natural woods. Please understand that natural woods have color
variations which are the result of nature and not defects in workmanship.

DO NOT SUBSTITUTE PARTS. ALL MODELS HAVE THE SAME QUANTITY OF PARTS AND HARD­WARE. YOUR MODEL MAY LOOK DIFFERENT FROM THE ONE ILLUSTRATED DUE TO STYLISTIC
VARIATIONS.

revised 23SEP2011

page 1

Cradle Parts

A. End Panel (2)

C. Bottom Board

D. Center Support Bar E. Side Support Bar (2)

H. Cross Rail

B. Side Rail (2)

F. Leg (4)

G. Bottom Rail (2)

J. 1” Pad

Hardware

H1. 2 -1/2” Allen Head Bolt with Nut (4)

H3. 1 -3/4” Round Head Bolt (4) H4. 1 -1/8” Round Head Bolt (4)

H5. Wood Dowel (8)

H6. Plastic Plug (4)

H2. 2 1/4" Allen Head Bolt (8)

H7. Allen wrench

H8. Lock

Washer (20)

Tools Needed

(not included)

Phillips

Screwdriver

page 2

STEP 1.

Assemble the side panels (B) to one of
the end panels (A) using

bolts (H2) and lock washers (H8)

Allen head

.

A. End Panel

B. Side Rail

H8

H2

H8

H2

* Make sure the groove at each s

faces the inside of the unit.

panel

DO NOT OVERTIGHTEN.

ide

STEP 2.

Place the center support bar (D) and
side support bar (E) as shown.

Then, slide in the bottom board (C) to
the groove at each side panel (B).

H8

H2

H8

H2

C. Bottom Board

* Make sure the groove at

bar (E)

faces the inside of the unit.

side support

STEP 3.

Place the other side support bar (E) as
shown.

* Make sure the groove at

bar (E)

faces the inside of the unit.

side support

D. Center

Support Bar

E. Side

Support

Bar

E. Side

Support

Bar

page 3