User’s manual (Canada version)
EL52201/EL52251/
EL52301/EL52351/EL52401 DECT 6.0 cordless telephone/ answering system with
caller ID/call waiting
Congratulations
on purchasing your new AT&T product. Before using this AT&T product, please read Important safety information on pages 68-69 of this user’s manual. Please thoroughly read the user’s manual for all the feature operations and
troubleshooting information you need to install and operate your new AT&T product. You can also visit our website at www.telephones.att.com or
call 1 (866) 288-4268.
Model number: EL52201/EL52251 (two-handset system)
EL52301/EL52351 (three-handset system)
EL52401 (four-handset system)
Type: DECT 6.0 cordless telephone with answering system
Serial number:
Purchase date:
Place of purchase:
Both the model and serial numbers of your AT&T product can be found on the bottom of the telephone base.
Telephones identified with this logo have reduced noise and interference when used with most T-coil equipped hearing aids and cochlear implants. The TIA-1083 Compliant Logo is a trademark of the Telecommunications Industry Association. Used under license.
The ENERGY STAR® program (www.energystar.gov) recognizes and encourages the use of products that save energy and help protect our environment. We are proud to mark this product with the ENERGY STAR® label indicating it meets the latest energy efficiency guidelines.
© 2011 Advanced American Telephones. All Rights Reserved. AT&T and the AT&T logo are trademarks of AT&T Intellectual Property licensed to Advanced American Telephones, San Antonio, TX 78219. Printed in China.
Parts checklist
Your telephone package contains the following items. Save your sales receipt and original packaging in the event warranty service is necessary.
Quick start guide (Canada version)
EL52201/EL52301/EL52401 DECT 6.0 cordless telephone/ answering system with
caller ID/call waiting
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Quick start guide |
Telephone base |
Power adapter for |
|||||||
|
|
|
|
|
|
|
telephone base |
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Cordless handset |
Charger for cordless handset |
Wall mount bracket |
(2 for EL52201/EL52251) |
with power adapter installed |
|
(3 for EL52301/EL52351) |
(1 for EL52201/EL52251) |
|
(4 for EL52401) |
(2 for EL52301/EL52351) |
|
|
(3 for EL52401) |
|
Battery for cordless handset (2 for EL52201/EL52251) (3 for EL52301/EL52351) (4 for EL52401)
Battery compartment cover |
Telephone line cord |
(2 for EL52201/EL52251) |
|
(3 for EL52301/EL52351) |
|
(4 for EL52401) |
|
User’s manual
EL52201/EL52251/
EL52301/EL52351/EL52401
DECT 6.0 cordless telephone/ answering system with
caller ID/call waiting
Table of contents |
|
Getting started |
|
Quick reference guide................................................. |
2 |
Telephone base and charger installation.......... |
4 |
Battery installation and charging.......................... |
5 |
Battery installation................................................ |
5 |
Battery charging..................................................... |
6 |
Wall mount installation.............................................. |
7 |
Tabletop to wall mount installation.............. |
7 |
Wall mount to tabletop installation.............. |
9 |
Telephone settings |
|
Menu overview.............................................................. |
10 |
Handset settings.......................................................... |
11 |
Ringer volume........................................................ |
11 |
Ringer tone.............................................................. |
11 |
LCD language......................................................... |
11 |
Voicemail waiting (visual message |
|
waiting) indicator.................................................. |
12 |
Clear voicemail indication................................ |
12 |
Key tone.................................................................... |
13 |
Set date/time......................................................... |
13 |
Home area code.................................................... |
14 |
Dial mode................................................................. |
14 |
Telephone base ringer volume............................. |
15 |
Answering system settings..................................... |
15 |
Telephone operation |
|
Making, answering and ending calls.................. |
16 |
Making a call........................................................... |
16 |
Temporary ringer silencing.............................. |
16 |
Answering a call................................................... |
17 |
Speakerphone........................................................ |
17 |
Ending a call........................................................... |
17 |
Redial................................................................................. |
18 |
View numbers in the redial list...................... |
18 |
Call a number from the redial list............... |
18 |
Copy a number from the redial list to |
|
the directory........................................................... |
19 |
Delete a number in the redial list................ |
19 |
Options while on calls.............................................. |
20 |
Volume control...................................................... |
20 |
Mute............................................................................ |
20 |
Flash/call waiting................................................. |
20 |
Temporary tone dialing..................................... |
21 |
Chain dialing........................................................... |
21 |
Join a call in progress........................................ |
22 |
Handset locator............................................................ |
23 |
Intercom........................................................................... |
24 |
Make and answer an intercom call............. |
24 |
Answer an incoming call during an |
|
intercom call........................................................... |
24 |
Call transfer using intercom................................... |
25 |
Directory |
|
Directory overview...................................................... |
26 |
Shared directory.................................................... |
26 |
Directory memory capacity............................. |
26 |
Exiting the directory............................................ |
26 |
Speed dial overview............................................ |
26 |
Create directory entries........................................... |
27 |
Add a new contact.............................................. |
27 |
Add a predialed telephone number to |
|
the directory........................................................... |
28 |
Review the directory.................................................. |
29 |
Review directory entries................................... |
29 |
Search by name..................................................... |
29 |
Dial, delete and edit a directory entry.............. |
30 |
Dial a directory number.................................... |
30 |
Delete a directory entry.................................... |
30 |
Edit a directory entry.......................................... |
30 |
Speed dial locations................................................... |
31 |
Assign or reassign a directory entry to |
|
a speed dial location.......................................... |
31 |
Clear a speed dial location............................. |
31 |
Dial a speed dial number................................. |
32 |
Caller ID |
|
About caller ID.............................................................. |
33 |
Information about caller ID with call |
|
waiting....................................................................... |
33 |
About home area code...................................... |
33 |
Caller ID history............................................................ |
34 |
How caller ID history (call log) works........ |
34 |
Memory match....................................................... |
34 |
Caller ID operation...................................................... |
35 |
Missed (new) calls indicator............................ |
35 |
Reasons for missing caller ID |
|
information.............................................................. |
35 |
View the caller ID history................................. |
36 |
View the dialing options................................... |
36 |
Dial a caller ID history number..................... |
37 |
Delete caller ID history entries...................... |
37 |
Save a caller ID history entry in the |
|
directory.................................................................... |
38 |
Answering system |
|
Answering system settings..................................... |
39 |
Announcement...................................................... |
39 |
Answer on/off........................................................ |
40 |
Call screening......................................................... |
41 |
Number of rings.................................................... |
41 |
Remote access code........................................... |
42 |
Message alert tone.............................................. |
42 |
Recording time....................................................... |
43 |
Voice language...................................................... |
43 |
Answering system overview................................... |
44 |
Answering system and voicemail |
|
indicators.................................................................. |
44 |
Using the answering system and |
|
voicemail together............................................... |
44 |
Voice prompts........................................................ |
45 |
Message capacity................................................. |
45 |
Answering system new message |
|
indication.................................................................. |
45 |
Call screening......................................................... |
45 |
Call intercept.......................................................... |
46 |
Temporarily turn off the message alert |
|
tone............................................................................. |
46 |
Message playback....................................................... |
47 |
Listen to messages.............................................. |
47 |
Options during playback................................... |
48 |
Delete all old messages.................................... |
49 |
Recording and playing memos............................. |
50 |
Record a memo..................................................... |
50 |
Play back memos................................................. |
50 |
Message window displays....................................... |
51 |
Remote access.............................................................. |
52 |
Remotely access the answering system... |
52 |
Appendix |
|
Screen icons, indicator lights and alert |
|
tones.................................................................................. |
54 |
Screen icons............................................................ |
54 |
Handset indicator lights.................................... |
54 |
Telephone base indicator lights.................... |
55 |
Handset alert tones............................................. |
55 |
Telephone base alert tones............................. |
55 |
Handset display screen messages...................... |
56 |
Troubleshooting............................................................ |
58 |
Maintenance................................................................... |
67 |
Important safety information................................. |
68 |
Safety information................................................ |
68 |
Precautions for users of implanted |
|
cardiac pacemakers............................................. |
69 |
Pacemaker patients............................................. |
69 |
Especially about telephone answering |
|
systems...................................................................... |
69 |
FCC Part 68 and ACTA.............................................. |
70 |
FCC Part 15.................................................................... |
71 |
Limited warranty.......................................................... |
72 |
Technical specifications............................................ |
74 |
DECT 6.0 digital technology............................ |
74 |
Telephone operating range............................. |
74 |
Index................................................................................... |
75 |
ii
You must install and charge the battery before using the cordless handset.
See pages 5 and 6 for easy instructions.
Install the telephone base close to a telephone wall jack and an electrical outlet not controlled by a wall switch. The telephone base can be placed on a flat surface or vertically mounted on the wall (page 7). For optimum range and better reception, place the telephone base in a central and open location.
If you subscribe to high-speed Internet service (DSLdigital subscriber line) through your telephone line, you must install a DSL filter between the
telephone line cord and the telephone wall jack (page 4). The filter prevents noise and caller ID problems caused by DSL interference. Please contact your DSL service provider for more information about DSL filters.
Your product may be shipped with a protective sticker covering the handset or telephone base display - remove it before use.
For customer service or product information, visit our website at www.telephones.att.com or call 1 (866) 288-4268.
Avoid placing the telephone base too close to:
•Communication devices such as television sets, VCRs, or other cordless telephones.
•Excessive heat sources.
•Noise sources such as a window with traffic outside, motors, microwave ovens, refrigerators, or fluorescent lighting.
•Excessive dust sources such as a workshop or garage.
•Excessive moisture.
•Extremely low temperature.
•Mechanical vibration or shock such as on top of a washing machine or work bench.
mute/delete
During a call, press to mute the microphone (page 20).
While predialing, press to erase digits (page 16).
While reviewing the redial list, directory, speed dial list or caller ID history, press to delete an individual entry (pages 19, 30, 31, and 37).
PHONE/FLASH
Press to make or answer a call (page 16).
During a call, press to answer an incoming call when you receive a call waiting alert (page 20).
1
While reviewing a caller ID history entry, press repeatedly to add or remove 1 in front of the telephone number before dialing or saving it in the directory (page 36).
0
While entering names in the directory, press to add a space (page 27).
tone
During a call, press to send touch-tone signals (page 21).
redial/pause
Press repeatedly to review the last 10 numbers dialed (page 18).
While entering numbers, press and hold to insert a
dialing pause (pages 16 and 27).
/SPEAKER
Press to turn on the handset speakerphone, press again to resume normal handset use (pages 17, 39, and 48).
int
Press to initiate an intercom conversation or transfer a call (pages 24 and 25).
DIR/volume
Press to scroll up while in menus (page 10).
Press to increase the listening volume (pages 20 and 48) during a call.
Press to show directory entries when the handset is not in use (page 29).
While entering names or numbers in the directory, press to move the cursor to the right (page 27).
CID/volume
Press to scroll down while in menus (page 10).
Press to decrease the listening volume (pages 20 and 48) during a call.
Press to show the caller ID history when the handset is not in use (page 36).
While entering names or numbers in the directory, press to move the cursor to the left (page 27).
menu/select
Press to display the menu (page 10).
Once in the menu, press to select an item or save an entry or setting (page 10).
off/cancel
During a call, press to hang up (page 17).
While using menus, press to cancel an operation, back up to the previous menu, or exit the menu display (page 10).
Press and hold while the handset is not in use to erase the missed call indicator (page 35).
# (pound key)
When reviewing a caller ID entry, press repeatedly to view the dialing options (page 36).
Getting started
Quick reference guide
The > symbol indicates the feature to select.
Main menu |
Using menus |
|
>PLAY MESSAGES
ANSWERING SYS
PLAY MESSAGES (page 47)
ANSWERING SYS (page 39)
DIRECTORY (page 26)
CALL LOG (page 33)
RINGERS (page 11)
SETTINGS (pages 11-14)
/repeat
Press menu/select to enter the main menu.
Press CID or DIR to scroll through menu items.
Press menu/select to select or modify an item.
Press off/cancel to cancel an operation, back up to the previous menu, or exit the
menu display.
After the answering system plays the day and time the current message was received, press to repeat the message currently playing (page 48).
While the answering system is playing the day and time the current message was received, press to listen to the previous message
(page 48).
//-volume+
When the telephone is not in use, press to adjust the telephone base ringer volume (page 15).
During call screening or message playback, press to adjust the listening volume (pages 46 and 48).
/ANS. ON/OFF
Press to turn the built-in answering system on or off (page 40).
/SKIP
Press to skip a message (page 48).
/play/stop
Press to start or stop message playback (page 47).
While call screening, press to temporarily turn the call screening on or off (page 45).
Message window
Displays the number of messages. During playback, displays the messages number currently playing (page 51).
x/delete
Press to delete the message currently playing (page 48).
Press twice to delete all old messages when the telephone is not in use (page 49).
/handset locator
Press to make all handsets beep so you can locate them (page 23).
Getting started
Install the telephone base and charger as shown below. If you subscribe to high-speed Internet service (DSL - digital subscriber line) through your
telephone line, you must install a DSL filter between the telephone line cord and the telephone wall jack. The filter prevents noise and caller ID problems caused by DSL interference. Please contact your DSL service provider for more information about DSL filters.
The telephone base comes ready for tabletop use. If you want to mount your telephone on a wall, refer to Wall mount installation on pages 7-9 for details.
Electrical outlet not controlled by a wall switch
Plug the large end of the base power adapter into an electrical outlet not controlled by a wall switch.
Plug the small end of the base power
adapter into the power jack on the bottom of the telephone base.
Plug the large end
of the charger’s power adapter into an electrical outlet not controlled by a
wall switch.
Telephone wall jack
Plug one end of the telephone line cord into a telephone wall jack.
A DSL filter (not included)
is required if you have DSL high-speed Internet service.
Telephone line cord
Route the cords through the slots.
Plug the other end of the telephone line cord
into the tel. line jack on the bottom of the telephone base.
Ensure the small end of the charger’s power adapter is plugged into the power jack on
the bottom of the charger.
important information:
Use only the power adapters provided with this
product. To obtain a replacement, visit our website
at www.telephones.att.com or call 1 (866) 288-4268.
Getting started
Install the battery as shown below.
Battery Pack BT162342/BT262342 2.4V 300mAh Ni-MH WARNING:DO NOT BURN OR PUNCTURE BATTERIES MADE IN CHINA CR092
1. Plug the battery |
2. Insert the supplied |
connector securely |
battery with the label |
into the socket inside |
this side up facing |
the handset battery |
up as indicated. |
compartment, matching the color-coded label.
charge light
3.Align the cover flat against the battery compartment, then slide it upwards until it clicks into place.
4.Charge the handset by placing it face up in the telephone base or charger. The charge light is on when charging.
To replace the battery, press the tab and slide the battery compartment cover downwards. Lift out the old battery and disconnect it from the handset. Follow the instructions above to
install and charge the new battery.
important information:
Use only the supplied rechargeable battery or replacement battery (model BT166342). To order,
visit our website at www.telephones.att.com or call 1 (866) 288-4268.
Getting started
Battery installation and charging
Once you have installed the battery, the screen indicates
the battery status (see the table below). If necessary, |
|
|
HANDSET 1 |
|
|
|
16 MISSED CALLS |
||
place the handset in the telephone base or charger to |
|
|
||
|
|
|
|
|
charge the battery. For best performance, keep the handset |
|
|
|
|
in the telephone base or charger when not in use. The |
|
10:30PM |
11/20 |
|
battery is fully charged after 10 hours of continuous |
Battery status icon |
|||
charging. See Technical specifications on page 74 for battery |
operating times.
If the screen is blank, you need to charge the handset without interruption for at least 30 minutes to give the handset enough charge to use the telephone for a short time. The screen shows low battery until you have charged the battery without interruption for at least 30 minutes. The
following table summarizes the battery charge indicators and actions to take.
|
|
|
Battery indicators |
Battery status |
Action |
|||||
|
|
|
|
|
|
|
|
|
|
|
The screen is blank or shows |
Battery has no or very little |
Charge without interruption (at |
||||||||
place in charger. |
charge. The handset cannot |
least 30 minutes). |
||||||||
|
|
|
|
|
|
|
|
|
be used. |
|
|
|
|
|
|
|
|
|
|
|
|
The screen shows |
Battery has enough charge |
Charge without interruption (at |
||||||||
|
|
|
|
|
|
|
|
to be used for a short time. |
least 30 minutes). |
|
low battery and |
|
flashes. |
||||||||
|
|
|
|
|
|
|
|
|
|
|
The screen shows handset x |
Battery is charged. |
To keep the battery charged, |
||||||||
and the battery icon shows |
|
place it in the telephone base |
||||||||
|
|
, |
|
or |
|
. |
|
or charger when not in use. |
||
|
|
|
|
|
|
|
|
|
|
|
notes:
•If you are on a call in low battery mode, you hear four short beeps every 50 seconds.
•If no battery is installed in the handset when you place it in the telephone base or charger, the charge light does not turn on and the screen shows no battery. Follow the instructions in Battery installation on page 5 to install the battery.
After you install your telephone or power returns following a power outage, the handset will prompt you to set the date and time (see page 13). To skip setting the date and time, press off/cancel.
SET DATE --/--/--
Getting started
The telephone base comes ready for tabletop use. If you want to mount your telephone on a wall, use the provided wall mount bracket to connect with
a standard dual-stud telephone wall mounting plate. If you do not have this mounting plate, you can purchase one from many hardware or consumer electronics retailers. Professional assistance may be required to install the mounting plate.
To change the telephone base from tabletop installation to wall mount installation, make sure you first unplug the power adapter from the electrical outlet and unplug the telephone line cord from the telephone wall jack.
1.Plug one end of the telephone line cord into the tel. line jack on the bottom of the telephone base. Plug the small end of the base power adapter into the power jack on the bottom of the telephone wall jack.
2.Position the telephone base as shown below. Insert the extended tabs of the wall mount bracket (marked B) into the slots on the back of the telephone base. Push the telephone base down until it clicks securely in place.
3.Route the telephone line cord through the wall mount bracket hole. Route the power cord out of the bottom of the telephone.
Wall mount bracket
Slots for wall mount bracket installation
A DSL filter (not included) is required if you have DSL high-speed Internet service.
Getting started
Wall mount installation
4.Plug the other end of the telephone line cord into the telephone wall jack. Plug the large end of the base power adapter into an electrical outlet not controlled by a wall switch.
A DSL filter (not included) is required if you have DSL high-speed Internet service.
5.Align the holes on the wall mount bracket with the mounting studs of the wall mounting plate and slide the bracket down until it locks securely into place. If necessary, bundle the telephone line cord and power adapter cord neatly with twist ties.
DSL filter DSL filter
Getting started
Wall mount installation
To change the telephone base from wall mount installation to tabletop installation, follow the steps below.
1.Unplug the large end of the base power adapter from the electrical outlet.
2.If the telephone line cord and power adapter cord are bundled, untie them first. Slide the wall mount bracket up and remove it from the wall mounting plate. Unplug the end of the telephone line cord from the telephone wall jack.
3. Lift the telephone base up to detach it from the wall mount bracket.
4.Refer to Telephone base and charger installation on page 4 to install the telephone base.
Use the menu to change the telephone settings.
1.Press menu/select in idle mode (when handset is not in use) to enter the main menu.
2. Press CID or DIR until > is next to the feature you want to select.
3.Press menu/select to select or save the indicated item.
-or-
Press off/cancel to cancel an operation, back up to the previous menu or exit the menu display.
-or-
Press and hold off/cancel to cancel an operation and return to idle mode.
-or-
If no key is pressed within 30 seconds, the handset automatically cancels an operation and returns to idle mode.
HANDSET 1
16 MISSED CALLS
10:30PM 11/20
The handset is in idle mode
>PLAY MESSAGES ANSWERING SYS
The > symbol indicates the feature to select.
note: The menu items play message, answering sys,
directory, call log, clr voicemail, set date/time, home area code and dial mode are shared by all handsets. Any changes made to these menu items on any one handset apply to all handsets.
Menu structure |
|
|
|
|
|
|
|
||||||
PLAY MESSAGES |
|
|
|
|
|
|
|
||||||
ANSWERING SYS |
|
|
|
|
|
|
|
|
|
||||
|
|
|
|
|
|
|
|
|
|||||
DIRECTORY |
|
|
|
ANNOUNCEMENT |
|
|
|||||||
CALL LOG |
|
|
|
DELETE ALL OLD |
|
|
|||||||
RINGERS |
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
RECORD MEMO |
|
|
||||
SETTINGS |
|
|
|
|
|
|
|
|
|
||||
|
|
|
|
|
ANSWER ON/OFF |
|
|
||||||
|
|
|
|
|
|
|
|
|
|||||
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
ANS SYS SETUP |
|
|
|
CALL SCREENING |
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
RINGER VOLUME |
|
|
# OF RINGS |
|
|
|
|
|
|
|
|
|
|
|||||
|
|
|
|
|
|
|
|
|
RINGER TONE |
|
|
REMOTE CODE |
|
|
|
|
|
|
|
|
|
|
|||||
|
|
|
|
|
|
|
|
|
|
|
|
|
MSG ALERT TONE |
|
|
|
|
|
|
|
|
|
LCD LANGUAGE |
|
RECORDING TIME |
||
|
|
|
|
|
|
|
|
|
|
VOICE LANGUAGE |
|||
|
|
|
|
|
|
|
|
|
|
||||
|
|
|
|
|
|
|
|
|
CLR VOICEMAIL |
|
|
||
|
|
|
|
|
|
|
|
|
KEY TONE |
|
|
||
|
|
|
|
|
|
|
|
|
SET DATE/TIME |
|
|
||
|
|
|
|
|
|
|
|
|
HOME AREA CODE |
|
|
||
|
|
|
|
|
|
|
|
|
DIAL MODE |
|
|
||
|
|
|
|
|
|
|
|
|
|
|
10
Telephone settings
You can set the handset ringer volume level (1-6), or turn the ringer off. When the ringer is off, appears on the handset screen.
1. Press menu/select in idle mode to enter the main menu.
2. Press CID or DIR to scroll to >Ringers. Press menu/select.
3. Press menu/select to select >Ringer volume.
RINGER VOLUME
4. Press CID or DIR to sample each volume level. 5. Press menu/select to save your preference.
notes:
•Changing the handset ringer volume does not affect the base ringer volume. For more information on the base ringer volume, see Telephone base ringer volume on page 15.
•The handset ringer volume also determines the ringer volume of intercom calls and paging tones.
•If the handset ringer volume is off, that handset ringer is silenced for all incoming calls. However, that handset still plays the paging tone when responding to the handset locator feature (see Handset locator on page 23).
•While the telephone is ringing, press off/cancel or mute/delete to silence the ringer temporarily on that handset only (see Temporary ringer silencing on page 16).
You can choose one of 10 ringer tones for the handset.
1. |
Follow Steps 1 and 2 in Ringer volume above. |
|||||
2. |
Press |
CID or |
DIR to scroll to >Ringer tone, then press >1RINGER TONE |
|||
|
menu/select. |
|
|
|
|
|
3. |
Press |
CID or |
DIR to sample each tone. |
|
|
|
|
|
|||||
4. |
Press menu/select to save your preference. |
note: if you turn off the handset ringer volume, you will not hear ringer tone samples.
You can select the language used for all screen displays.
1. |
Press menu/select in the idle mode to enter the |
||||||
|
main menu. |
|
|
LCD LANGUAGE |
|||
|
|
|
>ENGLISH |
||||
2. |
Press |
CID or |
DIR to scroll to >Settings. Press |
|
|
|
|
|
|
||||||
|
menu/select. |
|
|
|
|
|
|
|
|
|
|
|
|
||
3. |
Press menu/select to select >LCD language. |
||||||
4. |
Press |
CID or |
DIR to select English, Français or Español. |
||||
5. |
Press menu/select to save your preference. |
11
Telephone settings
Handset settings
If you subscribe to a voicemail service offered by your |
|
HANDSET 1 |
telephone service provider, this feature provides a visual |
|
|
|
NEW VOICEMAIL |
|
indication when you have new voicemail messages. new |
|
|
voicemail and appear on the handset screen. |
|
|
|
|
10:30PM 11/20
notes:
•Your telephone service provider might alert you to new voicemail messages with a stutter (broken) dial tone. Contact your telephone service provider for more details.
•This feature does not indicate new messages recorded on your telephone’s built-in answering system.
•For more information about the differences between your answering system and voicemail, see Answering system and voicemail indicators on page 44.
Use this feature when the telephone indicates there is a new voicemail message but there is none. This may occur, for example, when you have accessed your voicemail while away from home. This feature only turns off the displayed new voicemail message and icon; it does not delete your voicemail messages. As long as you have new voicemail messages, your telephone service provider continues to send the signal to turn on the indicators.
To manually turn off the new voicemail indicators:
1. Press menu/select when in idle mode to enter the main menu.
2. Press CID or DIR to scroll to >Settings, then press menu/select.
3. Press CID or DIR to scroll to >clr voicemail, then press menu/select. The screen shows turn off indicator?
4.Press menu/select to turn the voicemail indication off. A confirmation tone sounds.
-or-
Press off/cancel to cancel the procedure.
TURN OFF INDICATOR?
note: For more information about using your voicemail service, contact your telephone service provider for assistance.
12
Telephone settings
Handset settings
The handset is programmed to beep with each key press. You can turn the key tone off, so there are no beeps when you press keys.
1. Press menu/select in idle mode to enter the main menu.
2. Press CID or DIR to scroll to >Settings, then press menu/select.
3. |
Press |
CID or |
DIR to scroll to >Key tone, then press |
|
menu/select. |
|
|
4. |
Press |
CID or |
DIR to select >on or >off. |
5. |
Press menu/select to save your preference. |
KEY TONE >ON
The answering system announces the day of the week and time of each message received prior to playing it. If you subscribe to caller ID service, the day, month and time are set automatically with each incoming call (see About caller ID on page 33). However, the year must be set so that the day of the week can be calculated from the caller ID information.
Follow the steps below to set the month, date, year and time. 1. Press menu/select in idle mode to enter the main menu.
2. Press CID or DIR to scroll to >Settings, then press menu/select.
3. |
Press |
CID or |
DIR to scroll to >Set date/time, and |
|
then press menu/select. |
||
4. |
Press |
CID or |
DIR to select the month, then press |
menu/select, or enter the two-digit number (01-12) using the dialing keys (0-9).
SET DATE 11/20/10
5. |
Press |
CID or |
DIR to select the day, then press menu/select, or enter |
|
the two-digit number (01-31) using the dialing keys (0-9). |
||
6. |
Press |
CID or |
DIR to select the year, or enter the two-digit number |
|
(00-99) using the dialing keys (0-9), then press menu/select. |
7. |
Press |
CID or DIR to select the hour, then press |
||
|
menu/select, or enter the two-digit number (01-12) |
|||
|
using the dialing keys (0-9). |
|
|
|
|
|
|||
8. |
Press |
CID or DIR to select the minute, or enter the |
|
|
|
||||
|
two-digit number (00-59) using the dialing keys (0-9), |
|||
|
then press menu/select. |
|||
9. |
Press |
DIR or 2 to choose am, or press CID or 7 to choose |
menu/select to save. A confirmation tone sounds.
SET TIME 10:30 PM
pm. Press
note: If the date and time is not set when the message is recorded, the system announces “Time and date not set” before it plays the message.
13
Telephone settings
Handset settings
If you dial seven digits to make a local call (no area code required), enter your area code into the telephone as home area code. When you receive a call from within your home area code, the caller ID history only displays the seven digits of the telephone number.
This feature makes it easy for you to make a call from the caller ID history. If you dial 10 digits to make a local call, do not use this home area code feature. If you do, you will not be able to place calls from your caller ID history because they have only seven digits.
1. Press menu/select in idle mode to enter the main menu.
2. Press CID or DIR to scroll to >Settings, then press menu/select.
3. Press CID or DIR to scroll to >Home area code, then press menu/select.
4.Use the dialing keys to enter your three-digit area code. Press mute/delete to erase digits while entering.
5.Press menu/select to save the setting.
HOME AREA CODE
___
note: If, in the future, your telephone service provider requires you to dial 10 digits to make a local call (area code + telephone number), you need to delete your home area code. While the home area code is displaying in Step 4 above, press and hold mute/delete. The home area code is now restored to its default setting of _ _ _(empty).
The dial mode is preset to tone dialing. If you have pulse (rotary) service, you must change the dial mode to pulse dialing before using the telephone.
1. Press menu/select in the idle mode to enter the main menu.
2. |
Press |
CID or |
DIR to scroll to >Settings, then press menu/select. |
3. |
Press |
CID or |
DIR to scroll to >Dial mode, then press |
|
menu/select. |
DIAL MODE |
|
|
>TONE |
||
|
|
|
|
4. |
Press |
CID or |
DIR to choose between >Tone |
and >Pulse. 5. Press menu/select to save the setting.
note: If you have dial pulse (rotary) dialing service only, refer to Temporary tone dialing on page 21 to temporarily switch from dial pulse to touch-tone dialing during a call.
14
Telephone settings
When the telephone base is not in use, press
//-volume+ on the telephone base to set the ringer volume level (1-6), or turn the ringer off. A sample of the ringer sounds as you adjust the volume. The telephone base announces, “Base ringer is off” when you set the volume to 0.
note: If a handset is on an outside call, the telephone base volume cannot be changed.
Go to Answering system settings starting on page 39 for instructions on how to use a handset to modify the answering system settings shown below.
Setting |
Page(s) |
Announcement (record, play and delete) |
39-40 |
|
|
Answer on/off |
40 |
Call screening |
41 |
|
|
Number of rings |
41 |
|
|
Remote access code |
42 |
Message alert tone |
42 |
|
|
Recording time |
43 |
|
|
Voice language |
43 |
15
To make a call:
1. Press PHONE/FLASH, then wait for a dial tone. |
|
PHONE |
0:01:30 |
||
888-722-7702 |
|||||
-or- |
|||||
|
|
|
|
||
Press /SPEAKER to use the speakerphone, then |
|
|
|
|
|
|
10:30PM |
11/20 |
|||
wait for a dial tone. |
|
||||
|
|
|
|
||
2. Use the dialing keys to enter the telephone number. |
The screen displays the |
||||
|
|||||
On-hook dialing (predialing): |
elapsed time as you |
||||
talk (in hours, minutes and |
|||||
1. Use the dialing keys to enter the telephone number |
|||||
seconds). |
|
||||
(up to 30 digits). |
|
|
|
|
|
• Press and hold redial/pause to insert a three-second |
|
||||
dialing pause (a p appears). |
888-722-7702 |
•Press mute/delete or OFF/Cancel to erase digits.
2.Press PHONE/FLASH to call.
-or-
Press /SPEAKER to call using the speakerphone.
-or-
Press and hold OFF/Cancel to return to idle mode.
notes:
•Pressing PHONE/FLASH to access services from your telephone service provider does not affect the elapsed time.
•When a handset is on a call, if another handset attempts to access the directory, speed dial list or caller ID history, the screen shows not available at this time.
To silence the ringer temporarily on that handset only:
• |
While the telephone is ringing, press |
OFF/Cancel or |
|
RINGER MUTED |
|
mute/delete. |
|
|
|
To silence the ringer temporarily on the telephone base: |
|
|
||
|
|
|||
• |
While the telephone is ringing, press |
/-VOLUME on the |
|
|
|
telephone base. |
|
|
|
This turns off the ringer without disconnecting the call. The next incoming call rings normally at the preset volume.
note: Unless the ringer volume is turned off on that handset, each handset rings when there is an incoming call.
16
Telephone operation
Making, answering and ending calls
Press any dialing key (0-9,or #) or PHONE/FLASH.
-or-
Press /SPEAKER to use the speakerphone.
During a call, press /SPEAKER to switch between
speakerphone and normal handset use. |
SPEAKER |
0:01:30 |
|||
888-722-7702 |
|||||
Press |
OFF/Cancel to hang up. |
||||
|
|
|
|||
|
|
|
|||
|
|
|
|
||
note: After installing the battery in the handset, the screen may show 10:30PM |
11/20 |
||||
low battery. If you use the speakerphone at this time, the battery may |
|
|
|
become depleted. Follow the instructions in Battery charging on page 6.
Press OFF/Cancel.
-or-
Put the handset in the telephone base or charger to end the call.
17
Telephone operation
Each handset stores the 10 most recently called numbers in the redial list.
1. Press redial/pause in idle mode.
2. Press redial/pause. Press DIR, CID or redial/pause repeatedly to scroll through the 10 most recently called
numbers (up to 30 digits each). The handset beeps twice at the beginning or end of the list.
3. Press OFF/Cancel to exit the redial list.
note: If you access an empty redial list, the handset sounds an error tone.
• |
Follow Steps 1 and 2 above and when the number you |
REDIAL |
||||
|
want to call is displayed, press |
PHONE/FLASH or |
||||
|
888-722-7702 |
|||||
|
/SPEAKER to dial. |
|
|
|
|
|
-or- |
|
|
|
|
|
|
|
|
|
|
|
||
1. |
Press PHONE/FLASH or |
/SPEAKER and then wait for |
|
|
|
|
|
a dial tone. |
|
|
|
|
|
2. |
Press redial/pause. Press |
DIR, |
CID or |
|
|
|
redial/pause repeatedly until the number you want to call is displayed.
3. Press menu/select. The handset dials the desired number.
note: If you press redial/pause when the redial list is empty, the handset sounds an error tone.
18
Telephone operation
Redial
1. Press redial/pause.
2. Press CID or DIR to scroll to the number you want to save into the directory. Press menu/select twice. The screen shows edit number.
• |
Press CID or DIR to move the cursor to the left or right. |
||
• |
Press and hold redial/pause to enter a three-second |
EDIT NUMBER |
|
|
dialing pause (a p appears). |
888-722-7702_ |
|
• |
Press mute/delete to erase a digit. |
|
|
|
|
||
|
|
|
|
•Press and hold mute/delete to erase all digits.
3.Press menu/select again to save the number and edit the name. The screen shows edit name.
• |
Use the dialing keys (0-9) to edit the name. |
EDIT NAME |
_ |
||
• |
Press mute/delete to erase a character. |
|
•Press and hold mute/delete to erase all characters.
4.Press menu/select to store your new directory entry. The handset shows saved and sounds a confirmation tone.
While reviewing a number in the redial list, press mute/delete to delete the displayed number from the redial list.
19
Telephone operation
While on a call, press DIR/volume to increase or CID/volume to decrease the listening volume.
When the volume reaches the minimum or maximum setting, you hear two beeps.
note: The handset volume setting (1-5) and speakerphone volume setting (1-6) are independent.
Use the mute function to turn off the microphone while on a call. You can hear the caller, but the caller cannot hear you.
To turn mute on:
•Press mute/delete. When mute is on, the handset screen shows muted for a few seconds and the mute icon appears until you turn off mute.
To turn mute off:
•Press mute/delete and then resume speaking. When mute is off, microphone on appears temporarily on the handset screen.
-or-
Mute is automatically canceled when you end the call.
MUTED
10:30PM MUTE 11/20
If you subscribe to call waiting service provided by your telephone service provider, you hear a beep if someone calls you while you are already on a call.
• Press PHONE/FLASH to put your current call on hold
and take the new call.
• Press PHONE/FLASH anytime to switch back and forth between calls.
note: For more information on caller ID with call waiting, refer to
About caller ID on page 33.
20