User Guide
E12770 15060-97610000
ASUS Phone (Mobile Phone)
First Edition / August 2017
Model: ZC520KL (ASUS_ X00HD)
Before you start, ensure that you have read all the safety information and operating instructions in this User Guide to prevent injury or damage to your device.
NOTE: For the latest updates and more detailed information, please visit www.asus.com.
Front features
Receiver
LED indicator |
Front camera |
||
|
|
|
|
|
|
|
|
Proximity sensor and light sensor
Camera flash
Touch screen display
Touch keys
Fingerprint sensor
Side features
Audio jack |
|
Microphone |
|
Nano SIM / |
Volume key |
MicroSD card |
|
slot |
|
|
Power Key |
Micro USB port
Speaker Speaker
Rear features
Rear camera
Camera flash
Rear cover
Charging your ASUS Phone
To charge your ASUS Phone:
1.Connect the USB connector into the power adapter’s USB port.
2.Connect the other end of the micro USB cable to your ASUS Phone.
3.Plug the power adapter into a wall socket.
3 |
2 |
|
1
IMPORTANT!
•When using your ASUS Phone while it is plugged to a power outlet, the grounded power outlet must be near to the unit and easily accessible.
•When charging your ASUS Phone through your computer, ensure that you plug the micro USB cable to your computer’s USB port.
•Avoid charging your ASUS Phone in an environment with ambient temperature of above 35 °C (95 °F).
NOTES:
•For safety purposes, use ONLY the bundled power adapter and cable to avoid damaging your device and prevent the risk of injury.
•For safety purposes, use ONLY the bundled power adapter and cable to charge your ASUS Phone.
•The input voltage range between the wall outlet and this adapter is AC 100V - 240V.
The output voltage of the micro USB cable is
+5V2A, 10W.
Charging other devices
Use your ASUS Phone to power-charge other mobile devices.
To charge other devices with ASUS Phone:
1.Connect one end of the USB cable to the device that you want to charge and the other end to the OTG cable.
2.Connect the other end of the OTG cable to your ASUS Phone.
OTG cable
USB cable
Charging modes
Choose either of the following modes:
OTG mode: Charges attached devices a up to 0.5A standard current.
Reverse charging mode (optional): When this mode is selected, your ASUS Phone turns off to provide rapid reverse charging that can
output a high speed, high charging current up to 1.5A - depending on the device being charged. In this mode, your ASUS Phone can still monitor the charge levels. When battery power on your ASUS Phone is below 20%, your ASUS Phone automatically turns on and changes to OTG charging mode.