ASUS X008DC User Manual

User Guide

E12086

15060-xxxxxxxx

Revised Edition V3 /September2016

Model: ASUS_X008D/ASUS_X008DA/ASUS_X008DB/

ASUS_X008DC

Before you start, ensure that you have read all the safety information and operating instructions in this User Guideto prevent injury or damage toyour device.

NOTE: For the latestupdatesand moredetailed information, please visit www.asus.com.

Front features

	Proximity sensor
	Receiver
Front	LED indicator
camera
	Touch screen
	display

Side features

Audio jack

Nano SIM / micro SIM card slot

Volume Eject key hole

Power

key

Microphone Micro USB port

Rear features

Flash

Rear camera

Fingerprint sensor

NOTES:

•The Nano SIM / micro SIM card slots support GSM,WCDMA,FDD-LTE,andTDD-LTE network bands.

•ThemicroSDcardslotsupportsmicroSDand microSDXC card formats.

Charging your ASUS Phone

TochargeyourASUSPhone:

1.ConnecttheUSB connectorintothepower adapter’s USB port.

2.Connect the other end of the USB cableto your ASUS Phone.

3.Plug the power adapter into a wall socket.

3 2

1

IMPORTANT!

•When using your ASUS Phone while itisplugged to

a power outlet, the grounded power outlet mustbe near to the unit and easily accessible.

•When charging your ASUS Phone through your computer, ensure that you plug the USB cable to your computer’s USBport.

•Avoid charging your ASUS Phone in an environment with ambient temperature of above 35oC (95oF).

NOTES:

•Use only the power adapter that came with your

device.Usingadifferentpoweradaptermay damage your device.

•Using the bundled power adapterand ASUSPhone signal cable to connect your ASUS Phone to a poweroutletisthebestwaytochargeyourASUS Phone.

•Use the ASUS18W/10Wpoweradapter and ASUS

USB cable to get the best charge experience when your ASUS Phone is in sleep mode.

•The input voltagerange between the wall outletand

this adapter is AC 100V240V. The output voltage of the USBcableis+9V 2A, 18W /+5V 2A, 10W.

Installing a Nano SIM/ micro SIM / microSD card

To installa NanoSIM/ micro SIM/ microSD card:

1. Push the bundled eject pin into thehole on the card slot to eject the tray out.

2.Insertthe Nano SIM,micro SIM,or microSD card into the appropriate slot.

Micro-SIM1	Micro-SI M1
Micro SD

3. Push the tray to closeit.

IMPORTANT! Both SIM card slots support 4G / 3G / 2G

network band. But only one SIM card can connect to 4G service ata time.

CAUTION!

•Do not usesharp tools or solvent on your device to avoid scratchesonit.

•Use onlya standard Micro SIM or Nano SIM card onyour ASUSPhone.

•For more regulatory information and E-labels,

check on your device from Settings >About > Regulatory Information.