ASUS P8H61-m2, si r2.0 User Manual

0 (0)

P8H61-M2/TPM/SI R2.0

E7361_P8H61-M2-TPM-SI R2.0_Manua1 1

Motherboard

5/16/12 1:43:39 PM

E7361

First Edition (V1)

May 2012

No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”).

Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless such repair, modification of alteration is authorized in writing byASUS; or (2) the serial number of the product is defaced or missing.

ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE), EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.

SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE, AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.

Products and corporate names appearing in this manual may or may not be registered trademarks or copyrights of their respective companies, and are used only for identification or explanation and to the owners’ benefit, without intent to infringe.

Offer to Provide Source Code of Certain Software

This product contains copyrighted software that is licensed under the General Public License (“GPL”), under the Lesser General Public License Version (“LGPL”) and/or other Free Open Source Software Licenses. Such software in this product is distributed without any warranty to the extent permitted by the applicable law. Copies of these licenses are included in this product.

Where the applicable license entitles you to the source code of such software and/or other additional data, you may obtain it for a period of three years after our last shipment of the product, either

(1)for free by downloading it from http://support.asus.com/download

(2)for the cost of reproduction and shipment, which is dependent on the preferred carrier and the location where you want to have it shipped to, by sending a request to:

ASUSTeK Computer Inc.

Legal Compliance Dept.

15 Li Te Rd.,

Beitou, Taipei 112

Taiwan

In your request please provide the name, model number and version, as stated in the About Box of the product for which you wish to obtain the corresponding source code and your contact details so that we can coordinate the terms and cost of shipment with you.

The source code will be distributed WITHOUT ANY WARRANTY and licensed under the same license as the corresponding binary/object code.

This offer is valid to anyone in receipt of this information.

ASUSTeK is eager to duly provide complete source code as required under various Free Open Source Software licenses. If however you encounter any problems in obtaining the full corresponding source code we would be much obliged if you give us a notification to the email address gpl@asus.com, stating the product and describing the problem (please DO NOT send large attachments such as source code archives, etc. to this email address).

E7361_P8H61-M2-TPM-SI R2.0_Manua2 2			5/16/12 1:43:39 PM

Contents

Safety information.......................................................................................	vi
About this guide..........................................................................................	vi
P8H61-M2/TPM/SI R2.0 specifications summary....................................	viii

Chapter 1:		Product introduction
1.1	Welcome!.......................................................................................		1-1
1.2	Package contents.........................................................................		1-1
1.3	Special features............................................................................		1-1
	1.3.1	Product highlights ............................................................	1-1
	1.3.2	Innovative ASUS features ................................................	1-3
1.4	Before you proceed......................................................................		1-5
1.5	Motherboard overview.................................................................		1-6
	1.5.1	Placement direction .........................................................	1-6
	1.5.2	Screw holes .....................................................................	1-6
	1.5.3	Motherboard layout ..........................................................	1-7
	1.5.4	Layout contents . ..............................................................	1-7
1.6	Central Processing Unit (CPU)....................................................		1-8
	1.6.1	Installing the CPU ............................................................	1-8
	1.6.2	Installing the CPU heatsink and fan ...............................	1-11
	1.6.3	Uninstalling the CPU heatsink and fan ..........................	1-12
1.7	System memory..........................................................................		1-13
	1.7.1	Overview ........................................................................	1-13
	1.7.2	Memory configurations . .................................................	1-14
	1.7.3	Installing a DIMM ...........................................................	1-18
	1.7.4	Removing a DIMM .........................................................	1-18
1.8	Expansion slots..........................................................................		1-19
	1.8.1	Installing an expansion card ..........................................	1-19
	1.8.2	Configuring an expansion card ......................................	1-19
	1.8.3	PCI slots . .......................................................................	1-19
	1.8.4	PCI Express x1 slot . ......................................................	1-19
	1.8.5	PCI Express x16 slot . ....................................................	1-19
1.9	Jumpers	.......................................................................................	1-20
1.10	Connectors..................................................................................		1-21
	1.10.1 ............................................................	Rear panel ports	1-21
	1.10.2 ........................................................	Internal connectors	1-22

iii

E7361_P8H61-M2-TPM-SI R2.0_Manua3 3			5/16/12 1:43:40 PM

Contents

1.11 Software support........................................................................		1-28
1.11.1	Installing an operating system.......................................	1-28
1.11.2	Support DVD information...............................................	1-28

Chapter 2:		BIOS information
2.1	Managing and updating your BIOS.............................................		2-1
	2.1.1	ASUS Update utility.........................................................	2-1
	2.1.2	ASUS EZ Flash 2............................................................	2-2
	2.1.3	ASUS CrashFree BIOS 3 utility.......................................	2-3
	2.1.4	ASUS BIOS Updater.......................................................	2-4
2.2	BIOS setup program.....................................................................		2-6
2.3	Main menu...................................................................................		2-10
	2.3.1	System Language [English]...........................................	2-10
	2.3.2	System Date [Day xx/xx/xxxx].......................................	2-10
	2.3.3	System Time [xx:xx:xx]..................................................	2-10
	2.3.4	Security..........................................................................	2-10
2.4	Ai Tweaker menu........................................................................		2-12
	2.4.1	ASUS MultiCore Enhancement [Enabled].....................	2-12
	2.4.2	Memory Frequency [Auto].............................................	2-12
	2.4.3	GPU Boost.....................................................................	2-12
	2.4.4	DRAM Timing Control....................................................	2-13
	2.4.5	CPU Power Management..............................................	2-13
2.5	Advanced menu..........................................................................		2-14
	2.5.1	Trusted Computing........................................................	2-14
	2.5.2	CPU Configuration.........................................................	2-14
	2.5.3	PCH Configuration.........................................................	2-16
	2.5.4	SATAConfiguration........................................................	2-17
	2.5.5	SystemAgent Configuration..........................................	2-17
	2.5.6	USB Configuration.........................................................	2-18
	2.5.7	Onboard Devices Configuration....................................	2-18
	2.5.8	APM...............................................................................	2-19
	2.5.9	Network Stack...............................................................	2-20
2.6	Monitor menu..............................................................................		2-21
	2.6.1	CPU Temperature / MB Temperature [xxxºC/xxxºF]......	2-21
	2.6.2	CPU / Chassis Fan Speed.............................................	2-21

E7361_P8H61-M2-TPM-SI R2.0_Manua4 4			5/16/12 1:43:40 PM

Contents

	2.6.3	CPU Voltage, 3.3V Voltage, 5V Voltage, 12V Voltage...	2-21
	2.6.4	CPU Q-Fan Control [Enabled].......................................	2-22
	2.6.5	Chassis Q-Fan Control [Enabled]..................................	2-22
	2.6.6	Anti Surge Support [Enabled]........................................	2-23
2.7	Boot menu...................................................................................		2-24
	2.7.1	Bootup NumLock State [On]..........................................	2-24
	2.7.2	Full Screen Logo [Enabled]...........................................	2-24
	2.7.3	Wait for ‘F1’ If Error [Enabled].......................................	2-24
	2.7.4	Option ROM Messages [Force BIOS]...........................	2-25
	2.7.5	Setup Mode [EZ Mode]..................................................	2-25
	2.7.6	UEFI/Legacy Boot [Enabled both UEFI and Legacy]....	2-25
	2.7.7	PCI ROM Priority [Legacy ROM]...................................	2-25
	2.7.8	Boot Option Priorities.....................................................	2-25
	2.7.9	Boot Override................................................................	2-25
2.8	Tools menu..................................................................................		2-26
	2.8.1	ASUS EZ Flash 2 Utility.................................................	2-26
	2.8.2	ASUS SPD Information.................................................	2-26
	2.8.3	ASUS O.C. Profile.........................................................	2-26
2.9	Exit menu.....................................................................................		2-27

Appendices

Notices.......................................................................................................

A-1

E7361_P8H61-M2-TPM-SI R2.0_Manua5 5			5/16/12 1:43:41 PM

Safety information

Electrical safety

•To prevent electric shock hazard, disconnect the power cable from the electric outlet before relocating the system.

•When adding or removing devices to or from the system, ensure that the power cables for the devices are unplugged before the signal cables are connected. If possible, disconnect all power cables from the existing system before you add a device.

•Before connecting or removing signal cables from the motherboard, ensure that all power cables are unplugged.

•Seek professional assistance before using an adapter or extension cord. These devices could interrupt the grounding circuit.

•Ensure that your power supply is set to the correct voltage in your area. If you are not sure about the voltage of the electrical outlet you are using, contact your local power company.

•If the power supply is broken, do not try to fix it by yourself. Contact a qualified service technician or your retailer.

Operation safety

•Before installing the motherboard and adding devices on it, carefully read all the manuals that came with the package.

•Before using the product, ensure that all cables are correctly connected and the power cables are not damaged. If you detect any damage, contact your dealer immediately.

•To avoid short circuits, keep paper clips, screws, and staples away from connectors, slots, sockets and circuitry.

•Avoid dust, humidity, and temperature extremes. Do not place the product in any area where it may become wet.

•Place the product on a stable surface.

•If you encounter technical problems with the product, contact a qualified service technician or your retailer.

About this guide

This user guide contains the information you need when installing and configuring the motherboard.

How this guide is organized

This guide contains the following parts:

•Chapter 1: Product introduction

This chapter describes the features of the motherboard and the new technology it supports.

•Chapter 2: BIOS information

This chapter tells how to change system settings through the BIOS Setup menus. Detailed descriptions of the BIOS parameters are also provided.

E7361_P8H61-M2-TPM-SI R2.0_Manua6 6			5/16/12 1:43:41 PM

Conventions used in this guide

To ensure that you perform certain tasks properly, take note of the following symbols used throughout this manual.

DANGER/WARNING: Information to prevent injury to yourself when trying to complete a task.

CAUTION: Information to prevent damage to the components when trying to complete a task.

IMPORTANT: Instructions that you MUST follow to complete a task.

NOTE: Tips and additional information to help you complete a task.

Where to find more information

Refer to the following sources for additional information and for product and software updates.

1.ASUS websites

The ASUS website provides updated information on ASUS hardware and software products. Refer to the ASUS contact information.

2.Optional documentation

Your product package may include optional documentation, such as warranty flyers, that may have been added by your dealer. These documents are not part of the standard package.

Typography

Bold text	Indicates a menu or an item to select.
Italics	Used to emphasize a word or a phrase.
<Key>	Keys enclosed in the less-than and greater-than sign means
	that you must press the enclosed key.
	Example: <Enter> means that you must press the Enter or
	Return key.
<Key1>+<Key2>+<Key3>	If you must press two or more keys simultaneously, the key
	names are linked with a plus sign (+).
	Example: <Ctrl>+<Alt>+<D>

vii

E7361_P8H61-M2-TPM-SI R2.0_Manua7 7			5/16/12 1:43:43 PM

P8H61-M2/TPM/SI R2.0 specifications summary

CPU	LGA1155 socket for Intel® 3rd/2nd Generation Core™ i7 / i5 / i3 /
	Pentium® / Celeron® processors
	Supports 22/32nm CPU
	Supports Intel® Turbo Boost Technology 2.0
	* The Intel® Turbo Boost Technology 2.0 support depends on the
	CPU types.
Chipset	** Refer to www.asus.com for Intel® CPU support list.
Chipset	Intel® H61 Express Chipset
Memory	4 x DIMMs, max. 32GB, DDR3 2200 (O.C.) / 2000 (O.C.) / 1800
	(O.C.) / 1600 (O.C.) / 1333 / 1066 MHz, non-ECC, un-buffered
	memory
	Dual-channel memory architecture
	Supports Intel® Extreme Memory Profile (XMP)
	* DDR3 1600 MHz and higher memory frequency is supported
	by Intel® 3rd generation processors.
	** Hyper DIMM support is subject to the physical characteristics
	of individual CPUs. Some hyper DIMMs only support one
	DIMM per channel. Refer to Memory QVL for details.
	***Refer to www.asus.com for the Memory QVL (Qualified
	Vendors Lists).
	**** When you install a total memory of 4GB capacity or more,
	Windows® 32-bit operating system may only recognize less
	than 3GB. We recommend a maximum of 3GB system
Expansion slots	memory if you are using a Windows® 32-bit operating system.
Expansion slots	1 x PCI Express 3.0*/2.0 x16 slot
	1 x PCI Express 2.0 x1 slot
	2 x PCI slots
	* PCIe 3.0 speed is supported by Intel® 3rd generation Core™
Graphics	processors.
Graphics	Integrated Intel® HD Graphics
	- Supports single link DVI with max. resolution up to 1920 x
	1200 @60Hz
	- Supports D-Sub with max. resolution up to 2048 x 1536
	@75Hz
Storage	- Supports DirectX 10.1
Storage	Intel® H61 Express Chipset:
	- 4 x Serial ATA 3.0 Gb/s ports (blue)
	- Supports Intel® Smart Response Technology*
	* Supports on Intel® CoreTM processor family with Windows® 7
LAN	operating systems.
LAN	Realtek® 8111F Gigabit LAN controller
Audio	VIA® VT1708S 8-channel* Audio CODEC
	- S/PDIF out header
	- Supports Jack-Dection, Multi-streaming, Front Panel Jack-
	Retasking (HD only)
	* Use a chassis with HD audio module in the front panel to
	support an 8-channel audio output.
	(continued on the next page)

viii

E7361_P8H61-M2-TPM-SI R2.0_Manua8 8			5/16/12 1:43:43 PM

P8H61-M2/TPM/SI R2.0 specifications summary

USB

ASUS Special features

Internal connectors

Rear panel ports

BIOS features

Accessories

Support DVD

Form factor

10 x USB 2.0/1.1 ports (4 ports at mid-board, 6 ports at the back panel)

ASUS Anti-Surge protection

ASUS Network iControl* featuring instant network bandwidth domination for top network program in use

ASUS EPU (Lite)

GPU Boost

ASUS Fan Xpert

ASUS CrashFree BIOS 3

ASUS EZ Flash 2

ASUS MyLogo 2

* The Network iControl feature does not support Windows® XP/Vista operating systems.

2 x USB 2.0/1.1 connectors support additional 4 USB 2.0/1.1 ports

1 x System panel connector

1 x S/PDIF Out connector

4 x SATA 3.0 Gb/s connectors

1 x Front panel audio connector

1 x CPU fan connector

1 x Chassis fan connector

1 x COM connector

1 x LPT connector

1 x TPM IC onboard

1 x Speaker header

1 x 24-pin EATX Power connector

1 x 4-pin ATX 12V Power connector

1 x PS/2 keyboard/mouse combo port

1 x LAN (RJ-45) port

1 x D-Sub port

1 x DVI port

6 x USB 2.0/1.1 ports

3 x Audio jacks

64 Mb Flash ROM, UEFI BIOS, PnP, DMI v2.0, WfM2.0, SMBIOS v2.5, ACPI v2 0a, Multi-language BIOS

2 x Serial ATA 3.0 Gb/s cables

1 x I/O shield

1 x User Manual

1 x Support DVD

Drivers

ASUS Update

ASUS Utilities

Anti-virus software (OEM version)

uATX form factor: 9.6 in x 8.8 in (24.4 cm x 22.4 cm)

* Specifications are subject to change without notice.

E7361_P8H61-M2-TPM-SI R2.0_Manua9 9			5/16/12 1:43:44 PM

E7361_P8H61-M2-TPM-SI R2.0_Manua10 10

5/16/12 1:43:44 PM

Chapter 1

Product introduction

1.1Welcome!

Thank you for buying an ASUS® P8H61-M2/TPM/SI R2.0 motherboard!

The motherboard delivers a host of new features and latest technologies, making it another standout in the long line of ASUS quality motherboards!

Before you start installing the motherboard, and hardware devices on it, check the items in your package with the list below.

1.2Package contents

Check your motherboard package for the following items.

Motherboard	ASUS P8H61-M2/TPM/SI R2.0 motherboard
Cables	2 x Serial ATA 3.0Gb/s cables
Accessories	1 x I/O shield
Application DVD	ASUS motherboard support DVD
Documentation	User Manual

If any of the items is damaged or missing, contact your retailer.

1.3Special features

1.3.1Product highlights

LGA1155 socket for Intel® 3rd/2nd Generation Core™ i7 / Core™ i5 / Core™ i3 / Pentium® / Celeron® Processors

This motherboard supports the Intel® 3rd/2nd generation Core™ i7/i5/ i3/Pentium®/Celeron® processors in the LGA1155 package, with iGPU, memory, and PCI Express controllers integrated to support onboard graphics out with dedicated chipsets, 2-channel (4 DIMMs) DDR3 memory, and 16 PCI Express 3.0/2.0 lanes. This provides great graphics performance. Intel® 3rd/2nd generation Core™ i7/i5/i3/Pentium®/Celeron® processors are among the most powerful and energy efficient CPUs in the world.

	Chapter 1: Product introduction	1-1
E7361_P8H61-M2-TPM-SI R2.0_Manua1 1			5/16/12 1:43:46 PM

Intel® H61 Express Chipset

The Intel® H61 Express Chipset is the latest single-chipset design to support the new 1155 socket Intel® 3rd/2nd Generation Core™ i7 / Core™ i5 / Core™ i3 / Pentium® / Celeron® processors. It provides improved performance by utilizing serial point-to-point links, which allows increased bandwidth and stability.

Dual-Channel DDR3 2200 (O.C.) / 2000 (O.C.) / 1800 (O.C.) / 1600 (O.C.) / 1333 / 1066MHz support

The motherboard supports DDR3 memory that features data transfer rates of 2200 (O.C.) / 2000 (O.C.) / 1800 (O.C.) / 1600 (O.C.) / 1333/

1066 MHz to meet the higher bandwidth requirements of the latest 3D graphics, multimedia, and Internet applications. The dual-channel DDR3 architecture enlarges the bandwidth of your system memory to boost system performance.

PCI Express® 3.0

PCI Express® 3.0 (PCIe 3.0) is the latest PCI Express bus standard with improved encoding schemes that provide twice the performance of the current PCIe 2.0. The total bandwidth for a x16 link reaches a maximum of 32Gb/s, double the 16 Gb/s of PCIe 2.0 (in x16 mode). As such, PCIe 3.0 provides users an unprecendented data speeds, combined with the convenience and seamless transition offerred by complete backward compatibility with PCIe 1.0 and PCIe 2.0 devices. PCIe 3.0 will become a must-have feature for users who wish to improve and optimize graphic performance, as well as have the latest technology available to them.

* PCI 3.0 speed is supported by Intel® 3rd generation Core™ processors.

Gigabit LAN solution

The onboard LAN controller is a highly integrated Gb LAN controller. It is enhanced with anACPI management function to provide efficient power management for advanced operating systems.

Intel® Smart Response Technology SSD Speed with HDD Capacity

Intel® Smart Response Technology boosts overall system performance. It uses an installed fast SSD (min 18.6GB available capacity required) as a cache for frequently accessed data. Key benefits include reduced load and wait times, and lower power consumption through the elimination

of unnecessary hard drive spin. This technology combines SSD performance with hard drive capacity, operating up to 4X faster than a hard drive-only system, and an important part of Green ASUS ecofriendly computing.

*Intel® Smart Response Technology is supported by 3rd / 2nd generation Intel® Core™ processor family on Windows® 7™ operating systems.

**Operating systems must be installed on the HDD to launch Intel® Smart Response Technology. The capacity of the SSD is reserved for caching function.

	1-2	ASUS P8H61-M2/TPM/SI R2.0
E7361_P8H61-M2-TPM-SI R2.0_Manua2 2		5/16/12 1:43:51 PM

1.3.2Innovative ASUS features

Network iControl

With a one-click on/off button, the software currently in use is set as top priority over all other network programs, dominating the network bandwidth with ease. Moreover, you can prioritize your favorite software easily by configuring profiles through the intutive user interface. Within the profile, programs can be pre-scheduled to run in a specific time period to avoid network clogging and long-waits on downloads. Auto PPPoE network connection gives a one-step setup and an intuitive network bandwidth control center.

The Network iControl feature does not support Windows® XP/Vista operating systems.

ASUS UEFI BIOS

Flexible and Easy BIOS Interface

ASUS UEFI BIOS offers the first mouse-controlled graphical BIOS designed with selectable modes, providing a user-friendly interface that goes beyond the traditional keyboard-only controls. It also natively supports fully-utilized hard drives larger than 2.2TB in 64-bit operating systems.

ASUS exclusive interface

EZ Mode displays frequently-accessed info. Users can choose system performance settings, and drag and drop boot priorities. Advanced Mode for performance enthusiasts includes detailed DRAM settings via a dedicated memory info page for complete insight.

New upgrade! Quick and easy information for enhanced system control

- F12 BIOS snapshot hotkey for sharing UEFI information and troubleshooting

- New F3 Shortcut for most accessed information

- ASUS DRAM SPD (Serial Presence Detect) information for accessing memory information, detecting faulty DIMMs, and helping with difficult

POST situations.

AI Suite II

With its fast user-friendly interface, ASUS AI Suite II consolidates all the exclusive ASUS features into one simple to use software package. It allows you to supervise overclocking, energy management, fan speed control, and voltage and sensor readings. This all-in-one software offers diverse and ease to use functions, with no need to switch back and forth between different utilities.

ASUS Anti-Surge Protection

This special design prevents expensive devices and the motherboard from damage caused by power surges from switching power supply (PSU).

	Chapter 1: Product introduction	1-3
E7361_P8H61-M2-TPM-SI R2.0_Manua3 3			5/16/12 1:43:52 PM

GPU Boost

GPU Boost overclocks the integrated GPU in real time for the best graphics performance. User-friendly UI facilitates flexible frequency and voltage adjustments. Its ability to deliver multiple overclocking profiles also provides rapid and stable system-level upgrades.

EPU

Energy Efficiency All Around

Tap into the world’s first real-time PC power saving chip through theAI Suite II utility. Get total system-wide energy optimization by automatically detecting current PC loadings and intelligently moderating power consumption. This also reduces fan noise and extends component longevity.

ASUS Fan Xpert

ASUS Fan Xpert intelligently allows you to adjust the CPU fan and chassis fan speeds according to different ambient temperatures caused by different climate conditions in different geographic regions and your

PC’s loading. The built-in variety of useful profiles offer flexible controls of fan speed to achieve a quiet and cool environment.

ASUS MyLogo2™

This feature allows you to convert your favorite photo into a 256-color boot logo for a more colorful and vivid image on your screen.

ASUS CrashFree BIOS 3

ASUS CrashFree BIOS 3 is an auto-recovery tool that allows you to restore a corrupted BIOS file using the bundled support DVD or USB flash disk that contains the latest BIOS file.

ASUS EZ Flash 2

ASUS EZ Flash 2 is a utility that allows you to update the BIOS without using an OS-based utility.

C.P.R. (CPU Parameter Recall)

The BIOS C.P.R. feature automatically restores the CPU default settings when the system hangs due to overclocking failure. C.P.R. eliminates the need to open the system chassis and clear the RTC data. Simply shut down and reboot the system, and the BIOS automatically restores the CPU parameters to their default settings.

ErP ready

The motherboard is European Union´s Energy-related Products (ErP) ready, and ErP requires products to meet certain energy efficiency requirements in regards to energy consumptions. This is in line with

ASUS vision of creating environment-friendly and energy-efficient products through product design and innovation to reduce carbon footprint of the product and thus mitigate environmental impacts.

	1-4	ASUS P8H61-M2/TPM/SI R2.0
E7361_P8H61-M2-TPM-SI R2.0_Manua4 4		5/16/12 1:43:54 PM

1.4Before you proceed

Take note of the following precautions before you install motherboard components or change any motherboard settings.

• Unplug the power cord from the wall socket before touching any component.

•Before handling components, use a grounded wrist strap or touch a safely grounded object or a metal object, such as the power supply case, to avoid damaging them due to static electricity.

•Hold components by the edges to avoid touching the ICs on them.

•Whenever you uninstall any component, place it on a grounded antistatic pad or in the bag that came with the component.

•Before you install or remove any component, ensure that the ATX power supply is switched off or the power cord is detached from the power supply. Failure to do so may cause severe damage to the motherboard, peripherals, or components.

Standby Power LED

The motherboard comes with a standby power LED that lights up to indicate that the system is ON, in sleep mode, or in soft-off mode. This is a reminder that you should shut down

the system and unplug the power cable before removing or plugging in any motherboard component. The illustration below shows the location of the onboard LED.

SB_PWR

P8H61-M2/TPM/SI R2.0

ON OFF

Standby Power Powered Off

P8H61-M2/TPM/SI R2.0 Onboard LED

	Chapter 1: Product introduction	1-5
E7361_P8H61-M2-TPM-SI R2.0_Manua5 5			5/16/12 1:43:55 PM

1.5Motherboard overview

Before you install the motherboard, study the configuration of your chassis to ensure that the motherboard fits into it.

Ensure that you unplug the power cord before installing or removing the motherboard.

Failure to do so can cause you physical injury and damage motherboard components.

1.5.1Placement direction

When installing the motherboard, ensure that you place it into the chassis in the correct orientation. The edge with external ports goes to the rear part of the chassis as indicated in the image below.

1.5.2Screw holes

Place six screws into the holes indicated by circles to secure the motherboard to the chassis.

Do not overtighten the screws! Doing so can damage the motherboard.

Place this side towards

the rear of the chassis

P8H61-M2/TPM/SI R2.0

1-6

ASUS P8H61-M2/TPM/SI R2.0

E7361_P8H61-M2-TPM-SI R2.0_Manua6 6

5/16/12 1:43:57 PM

1.5.3Motherboard layout

1		2	3	2
			22.4cm(8.8in)



	KB_USB56			CPU_FAN

	EPU
DVI
	ATX12V
ASM 1443		module)
VGA	LGA1155	(64bit, 240-pin
USB3_E12		DIMM A1
USB3_E12		DDR3
		DDR3

LAN_USB12	CHA_FAN

Lithium Cell

CMOS Power

AUDIO

PCIEX16

RTL

P8H61-M2/TPM/SI R2.0

8111F

PCI1

Intel®

ASM

PCI2

H61

1083

SPDIF_OUT

VIA

PCIEX1_1

SB_PWR

VT1708S

F_PANEL

USB910

USB78

AAFP

CLRTC SPEAKER

COM1

Super

I/O

pinmodule)

(64bit, 240

LPT

DDR3 DIMM A2

DDR3 DIMM B1

DDR3 DIMM B2

EATXPWR

24.4cm(9.6in)

64Mb

BIOS

SATA3G_3 SATA3G_1

SATA3G_4 SATA3G_2

1.5.4Layout contents

Connectors/Jumpers/Slots/LED		Page	Connectors/Jumpers/Slots/LED		Page
1.	ATX power connectors (24-pin EATXPWR,	1-22	8.	System panel connector (10-1 pin F_PANEL)	1-24
	4-pin ATX12V)
2.	CPU and Chassis fan connectors (4-pin	1-23	9.	Speaker connector (4-pin SPEAKER)	1-26
	CPU_FAN, 3-pin CHA_FAN)
3.	Intel® LGA1155 CPU socket	1-8	10.	Clear RTC RAM (3-pin CLRTC)	1-20
4.	DDR3 DIMM slots	1-13	11.	Standby power LED (SB_PWR)	1-5
5.	Serial port connector (10-1 pin COM1)	1-23	12.	USB connectors (10-1 pin USB78, USB910)	1-26
6.	LPT connector (26-1 pin LPT)	1-24	13.	Front panel audio connector (10-1 pin AAFP)	1-25
7.	Serial ATA connectors (7-pin SATA3G_1-4)	1-25	14.	Digital audio connector (4-1 pin SPDIF_OUT)	1-27

Chapter 1: Product introduction

1-7

E7361_P8H61-M2-TPM-SI R2.0_Manua7 7			5/16/12 1:43:57 PM

1.6Central Processing Unit (CPU)

The motherboard comes with a surface mount LGA1155 socket designed for the Intel® 3rd/2nd Generation Core™ i7/ i5/ i3/ Pentium® / Celeron® processors.

Unplug all power cables before installing the CPU.

• Upon purchase of the motherboard, ensure that the PnP cap is on the socket and the socket contacts are not bent. Contact your retailer immediately if the PnP cap is missing, or if you see any damage to the PnP cap/socket contacts/motherboard components. ASUS will shoulder the cost of repair only if the damage is shipment/transit-related.

•Keep the cap after installing the motherboard. ASUS will process Return Merchandise

Authorization (RMA) requests only if the motherboard comes with the cap on the

LGA1155 socket.

•The product warranty does not cover damage to the socket contacts resulting from incorrect CPU installation/removal, or misplacement/loss/incorrect removal of the PnP cap.

1.6.1Installing the CPU

To install a CPU:

1.Locate the CPU socket on the motherboard.

P8H61-M2/TPM/SI R2.0

P8H61-M2/TPM/SI R2.0 CPU socket LGA1155

2.Press the load lever with your thumb (A), and then move it to the right (B) until it is released from the retention tab.

To prevent damage to the socket pins, do not remove the PnP cap unless you are installing a CPU.

Load lever

Retention tab

	1-8	ASUS P8H61-M2/TPM/SI R2.0
E7361_P8H61-M2-TPM-SI R2.0_Manua8 8		5/16/12 1:43:59 PM

3.Lift the load lever in the direction of the arrow until the load plate is completely lifted.

4.Remove the PnP cap from the CPU socket by lifting the tab only.

5.Position the CPU over the socket, ensuring that the gold triangle is on the bottom left corner of the socket, and then fit the socket alignment keys into the CPU notches.

PnP cap

CPU notches

The CPU fits in only one correct orientation. DO NOT force the CPU into the socket to prevent bending the connectors on the socket and damaging the CPU!

Gold

triangle

mark

Alignment keys

	Chapter 1: Product introduction	1-9
E7361_P8H61-M2-TPM-SI R2.0_Manua9 9			5/16/12 1:44:00 PM

6.Apply some Thermal Interface Material to the exposed area of the CPU that the heatsink will be in contact with, ensuring that it is spread in an even thin layer.

Some heatsinks come with preapplied thermal paste. If so, skip this step.

The Thermal Interface Material is toxic and inedible. DO NOT eat it. If it gets into your eyes or touches your

skin, wash it off immediately, and seek professional medical help.

7.Close the load plate (A), and then push down the load lever (B), ensuring that the front edge of the load plate slides under the retention knob (C).

8.Insert the load lever under the retention tab.

	1-10	ASUS P8H61-M2/TPM/SI R2.0
E7361_P8H61-M2-TPM-SI R2.0_Manua10 10		5/16/12 1:44:01 PM

1.6.2Installing the CPU heatsink and fan

The Intel® LGA1155 processor requires a specially designed heatsink and fan assembly to ensure optimum thermal condition and performance.

• When you buy a boxed Intel® processor, the package includes the CPU fan and heatsink assembly. If you buy a CPU separately, ensure that you use only Intel® certified multi directional heatsink and fan.

•Your Intel® LGA1155 heatsink and fan assembly comes in a push-pin design and requires no tool to install.

•Use an LGA1155-compatible CPU heatsink and fan assembly only. The LGA1155 socket is incompatible with the LGA775 and LGA1366 sockets in size and dimension.

If you purchased a separate CPU heatsink and fan assembly, ensure that you have properly applied Thermal Interface Material to the CPU heatsink or CPU before you install the heatsink and fan assembly.

Ensure that you have installed the motherboard to the chassis before you install the CPU fan and heatsink assembly.

To install the CPU heatsink and fan:

1.Place the heatsink on top of the installed CPU, ensuring that the four fasteners match the holes on the motherboard.

Orient the heatsink and fan assembly such that the CPU fan cable is closest to the CPU fan connector.

2.Push down two fasteners at a time in a diagonal sequence to secure the heatsink and fan assembly in place.

A B

B A

The type of CPU heatsink and fan assembly may differ, but the installation steps and functions should remain the same. The illustration above is for reference only.

	Chapter 1: Product introduction	1-11
E7361_P8H61-M2-TPM-SI R2.0_Manua11 11			5/16/12 1:44:03 PM

+ 49 hidden pages