ASUS P8H61-I R2 User Manual

P8H61-I R2.0Motherboard

E7443

First Edition

June 2012

Copyright © 2012 ASUSTeK COMPUTER INC. All Rights Reserved.

No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”).

Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless such repair, modification of alteration is authorized in writing byASUS; or (2) the serial number of the product is defaced or missing.

ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE), EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.

SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE, AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.

Products and corporate names appearing in this manual may or may not be registered trademarks or copyrights of their respective companies, and are used only for identification or explanation and to the owners’ benefit, without intent to infringe.

Offer to Provide Source Code of Certain Software

This product contains copyrighted software that is licensed under the General Public License (“GPL”), under the Lesser General Public License Version (“LGPL”) and/or other Free Open Source Software Licenses. Such software in this product is distributed without any warranty to the extent permitted by the applicable law. Copies of these licenses are included in this product.

Where the applicable license entitles you to the source code of such software and/or other additional data, you may obtain it for a period of three years after our last shipment of the product, either

(1)for free by downloading it from http://support.asus.com/download

or

(2)for the cost of reproduction and shipment, which is dependent on the preferred carrier and the location where you want to have it shipped to, by sending a request to:

ASUSTeK Computer Inc.

Legal Compliance Dept.

15 Li Te Rd.,

Beitou, Taipei 112

Taiwan

In your request please provide the name, model number and version, as stated in the About Box of the product for which you wish to obtain the corresponding source code and your contact details so that we can coordinate the terms and cost of shipment with you.

The source code will be distributed WITHOUT ANY WARRANTY and licensed under the same license as the corresponding binary/object code.

This offer is valid to anyone in receipt of this information.

ASUSTeK is eager to duly provide complete source code as required under various Free Open Source Software licenses. If however you encounter any problems in obtaining the full corresponding source code we would be much obliged if you give us a notification to the email address [e-mail], stating the product and describing the problem (please DO NOT send large attachments such as source code archives, etc. to this email address).

ii

Contents

Safety information.......................................................................................	vi
About this guide..........................................................................................	vi
P8H61-I R2.0 specifications summary.....................................................	viii

Chapter 1		Product introduction
1.1	Before you proceed......................................................................		1-1
1.2	Motherboard overview.................................................................		1-2
	1.2.1	Placement direction .........................................................	1-2
	1.2.2	Screw holes .....................................................................	1-2
	1.2.3	Motherboard layout ..........................................................	1-3
	1.2.4	Layout contents . ..............................................................	1-3
1.3	Central Processing Unit (CPU)....................................................		1-4
1.4	System memory............................................................................		1-4
	1.4.1	Overview ..........................................................................	1-4
	1.4.2	Memory configurations . ...................................................	1-5
1.5	Expansion slots..........................................................................		1-13
	1.5.1	Installing an expansion card ..........................................	1-13
	1.5.2	Configuring an expansion card ......................................	1-13
	1.5.3	PCI Express x16 slot . ....................................................	1-13
1.6	Jumpers	.......................................................................................	1-14
1.7	Connectors..................................................................................		1-15
	1.7.1 ..................................................	Rear panel connectors	1-15
	1.7.2 ........................................................	Internal connectors	1-17
1.8	Software ........................................................................support		1-22
	1.8.1 .......................................	Installing an operating system	1-22
	1.8.2 ...............................................	Support DVD information	1-22

Chapter 2		BIOS information
2.1	Managing and updating your BIOS.............................................		2-1
	2.1.1	ASUS Update utility.........................................................	2-1
	2.1.2	ASUS EZ Flash 2............................................................	2-2
	2.1.3	ASUS CrashFree BIOS 3 utility.......................................	2-3
	2.1.4	ASUS BIOS Updater.......................................................	2-4

iii

Contents

2.2	BIOS setup program.....................................................................		2-6
2.3	Main menu...................................................................................		2-10
	2.3.1	System Language [English]...........................................	2-10
	2.3.2	System Date [Day xx/xx/xxxx].......................................	2-10
	2.3.3	System Time [xx:xx:xx]..................................................	2-10
	2.3.4	Security..........................................................................	2-10
2.4	Ai Tweaker menu........................................................................		2-12
	2.4.1	Memory Frequency [Auto].............................................	2-12
	2.4.2	GPU Boost.....................................................................	2-13
	2.4.3	DRAM Timing Control....................................................	2-13
	2.4.4	CPU Power Management..............................................	2-13
	2.4.5	CPU Offset Mode Sign [+].............................................	2-14
	2.4.6	DRAM Voltage [Auto].....................................................	2-14
	2.4.7	VCCSA Voltage [Auto]...................................................	2-14
	2.4.8	VCCIO Voltage [Auto]....................................................	2-14
	2.4.9	PCH Voltage [Auto]........................................................	2-14
2.5	Advanced menu..........................................................................		2-15
	2.5.1	CPU Configuration.........................................................	2-15
	2.5.2	PCH Configuration.........................................................	2-17
	2.5.3	SATAConfiguration........................................................	2-19
	2.5.4	SystemAgent Configuration..........................................	2-19
	2.5.5	USB Configuration.........................................................	2-20
	2.5.6	Onboard Devices Configuration....................................	2-21
	2.5.7	APM...............................................................................	2-22
	2.5.8	Network Stack...............................................................	2-22
2.6	Monitor menu..............................................................................		2-23
	2.6.1	CPU Temperature / MB Temperature [xxxºC/xxxºF]......	2-23
	2.6.2	CPU / Chassis Fan Speed.............................................	2-23
	2.6.3	CPU Q-Fan Control [Enabled].......................................	2-24
	2.6.4	Chassis Q-Fan Control [Enabled]..................................	2-24
	2.6.5	CPU Voltage, 3.3V Voltage, 5V Voltage, 12V Voltage...	2-24
	2.6.6	Anti Surge Support [Enabled]........................................	2-24

iv

Contents

2.7	Boot menu...................................................................................		2-25
	2.7.1	Bootup NumLock State [On]..........................................	2-25
	2.7.2	Full Screen Logo [Enabled]...........................................	2-25
	2.7.3	Wait For ‘F1’ If Error [Enabled]......................................	2-26
	2.7.4	Option ROM Messages [Force BIOS]...........................	2-26
	2.7.5	Setup Mode [EZ Mode]..................................................	2-26
	2.7.6	UEFI/Legacy Boot [Enable both UEFI and Legacy]......	2-26
	2.7.7	PCI ROM Priority [Legacy ROM]...................................	2-26
	2.7.8	Boot Option Priorities.....................................................	2-26
	2.7.9	Boot Override................................................................	2-26
2.8	Tools menu..................................................................................		2-27
	2.8.1	ASUS EZ Flash Utility....................................................	2-27
	2.8.2	ASUS SPD Information.................................................	2-27
	2.8.3	ASUS O.C. Profile.........................................................	2-27
2.9	Exit menu.....................................................................................		2-28

Appendices

Notices.......................................................................................................	A-1
ASUS contact information........................................................................	A-3

Safety information

Electrical safety

•To prevent electric shock hazard, disconnect the power cable from the electric outlet before relocating the system.

•When adding or removing devices to or from the system, ensure that the power cables for the devices are unplugged before the signal cables are connected. If possible, disconnect all power cables from the existing system before you add a device.

•Before connecting or removing signal cables from the motherboard, ensure that all power cables are unplugged.

•Seek professional assistance before using an adapter or extension cord. These devices could interrupt the grounding circuit.

•Ensure that your power supply is set to the correct voltage in your area. If you are not sure about the voltage of the electrical outlet you are using, contact your local power company.

•If the power supply is broken, do not try to fix it by yourself. Contact a qualified service technician or your retailer.

Operation safety

•Before installing the motherboard and adding devices on it, carefully read all the manuals that came with the package.

•Before using the product, ensure that all cables are correctly connected and the power cables are not damaged. If you detect any damage, contact your dealer immediately.

•To avoid short circuits, keep paper clips, screws, and staples away from connectors, slots, sockets and circuitry.

•Avoid dust, humidity, and temperature extremes. Do not place the product in any area where it may become wet.

•Place the product on a stable surface.

•If you encounter technical problems with the product, contact a qualified service technician or your retailer.

About this guide

This user guide contains the information you need when installing and configuring the motherboard.

How this guide is organized

This guide contains the following parts:

•Chapter 1: Product introduction

This chapter describes the features of the motherboard and the new technology it supports.

•Chapter 2: BIOS information

This chapter tells how to change system settings through the BIOS Setup menus. Detailed descriptions of the BIOS parameters are also provided.

vi

Conventions used in this guide

To ensure that you perform certain tasks properly, take note of the following symbols used throughout this manual.

DANGER/WARNING: Information to prevent injury to yourself when completing a task.

CAUTION: Information to prevent damage to the components when completing a task.

IMPORTANT: Instructions you MUST follow to complete a task.

NOTE: Tips and additional information to help you complete a task.

Where to find more information

Refer to the following sources for additional information and for product and software updates.

1.ASUS websites

The ASUS website provides updated information on ASUS hardware and software products. Refer to the ASUS contact information.

2.Optional documentation

Your product package may include optional documentation, such as warranty flyers, that may have been added by your dealer. These documents are not part of the standard package.

Typography

Bold text	Indicates a menu or an item to select.
Italics	Used to emphasize a word or a phrase.
<Key>	Keys enclosed in the less-than and greater-than sign
	means that you must press the enclosed key.
	Example: <Enter> means that you must press the Enter
	or Return key.
<Key1> + <Key2> + <Key3>	If you must press two or more keys simultaneously, the
	key names are linked with a plus sign (+). Example:
	<Ctrl> + <Alt> + <Del>

vii

P8H61-I R2.0 specifications summary

CPU

Chipset

Memory

Expansion slots

Graphics

Storage

LAN

Audio

USB

LGA1155 socket for Intel® 3nd / 2nd Generation Core™ i7 / Core™ i5 / Core™ i3 / Pentium® / Celeron® processors

Supports 22/32nm CPU

Supports Intel® Turbo Boost technology 2.0

*The Intel® Turbo Boost technology 2.0 support depends on the CPU types.

**Refer to www.asus.com for Intel® CPU support list.

Intel® H61 Express Chipset

2 x DIMMs, maximum 16GB, DDR3 2200 (O.C.) / 2100 (O.C.) /

2000 (O.C.) / 1800 (O.C.) / 1600 (O.C.) / 1333 / 1066 MHz, non-

ECC, un-buffered memory*

Dual-channel memory architecture

*When you install a total memory of 4GB capacity or more, Windows® 32-bit operating system may only recognize less than

3GB. We recommend a maximum of 3GB system memory if you are using a Windows® 32-bit operating system.

**DDR3 1600 MHz and higher memory frequency is supported by

Intel® 3rd generation processors.

***Refer to www.asus.com for the latest Memory QVL (Qualified

Vendors List).

1 x PCI Express 3.0*/2.0 x16 slot

*PCIe 3.0 speed is supported by Intel® 3rd generation processors.

Supports HDMI with max. resolution up to 1920 x 1200 @60Hz Supports DVI with max. resolution up to 1920 x 1200 @60Hz Supports D-Sub with max. resolution up to 2048 x 1530 @75Hz

Max. UMA memory: 1748MB Intel® H61 Express Chipset:

-4 x Serial ATA 3.0 Gb/s connectors (blue)

-Supports AHCI Mode (in Windows® 7/Vista)

Realtek® RTL8111F Gigabit LAN controller

VIAVT1708S 8-channel High DefinitionAudio CODEC

- Supports Jack-Detection, Multi-streaming, and Front Panel JackRetasking

2 x USB 3.0/2.0 ports (the back panel)

8 x USB 2.0/1.1 ports (4 ports at the mid-board, 4 ports at the back panel)

(continued on the next page)

viii

P8H61-I R2.0 specifications summary

Rear panel ports	1 x PS/2 Keyboard/Mouse Combo port
	1 x HDMI output port
	1 x DVI-D output port
	1 x D-Sub output port
	1 x LAN (RJ-45) port
	4 x USB 2.0/1.1 ports
	2 x USB 3.0/2.0 ports (blue)
Internal connectors	3 x Audio jacks
	2 x USB 2.0/1.1 connector support additional 4 USB 2.0/1.1 ports
	4 x SATA 3.0Gb/s connectors
	1 x 4-pin CPU fan connector
	1 x 4-pin Chassis fan connector
	1 x Front panel audio connector
	1 x System panel connector
	1 x Clear CMOS jumper
	1 x 24-pin EATX power connector
	1 x 4-pin ATX 12V power connector
	1 x speaker header
	1 x S/PDIF out connector
	1 x DRCT Header
BIOS features	64 Mb Flash ROM, AMI BIOS, PnP, DMI 2.0, WfM 2.0, ACPI 2.0a,
Manageability	SM BIOS 2.5
	WOL by PME, PXE
Accessories	2 x Serial ATA cables
	1 x I/O shield
	1 x User Manual
Support DVD	1 x Support DVD
	Drivers
	ASUS utilities
	ASUS Update
Form factor	Anti-virus software (OEM version)
	Mini-ITX form factor: 6.75 in x 6.75 in (17.1 cm x 17.1 cm)

* Specifications are subject to change without notice.

ix

Chapter 1

Product introduction

Thank you for buying an ASUS® P8H61-I R2.0 motherboard!

Before you start installing the motherboard and adding hardware components, check the items in your motherboard package. Refer to page ix for the list of accessories.

If any of the items is damaged or missing, contact your retailer.

1.1Before you proceed

Take note of the following precautions before you install motherboard components or change any motherboard settings.

• Unplug the power cord from the wall socket before touching any component.

•Before handling components, use a grounded wrist strap or touch a safely grounded object or a metal object, such as the power supply case, to avoid damaging them due to static electricity.

•Hold components by the edges to avoid touching the ICs on them.

•Whenever you uninstall any component, place it on a grounded antistatic pad or in the bag that came with the component.

•Before you install or remove any component, ensure that the ATX power supply is switched off or the power cord is detached from the power supply. Failure to do so may cause severe damage to the motherboard, peripherals, or components.

Onboard LED

This motherboard comes with a standby power LED that lights up to indicate that the system is ON, in sleep mode, or in soft-off mode. This is a reminder that you must shut down

the system and unplug the power cable before removing or plugging in any motherboard component. The illustration below shows the location of the onboard LED.

I-P8H61 0.R2

SB_PWR

ON OFF

Standby Power Powered Off

P8H61-I R2.0 Onboard LED

1-1	Chapter 1: Product introduction

1.2Motherboard overview

Before you install the motherboard, study the configuration of your chassis to ensure that the motherboard fits.

Unplug the power cord before installing or removing the motherboard. Failure to do so can cause you physical injury and damage motherboard components.

1.2.1Placement direction

When installing the motherboard, place it into the chassis in the correct orientation. The edge with external ports goes to the rear part of the chassis as indicated in the image below.

1.2.2Screw holes

Place four screws into the holes indicated by circles to secure the motherboard to the chassis.

Do not overtighten the screws! Doing so can damage the motherboard.

Place this side towards the rear of the chassis

0.R2

I-P8H61

ASUS P8H61-I R2.0			1-2

1.2.3Motherboard layout

1

KBMS

HDMI

DVI_VGA

USB78

USB56

ASM 1442

ASM

USB12 1042

LAN1_USB3_12

RTL 8111F

AUDIO AAFP

VIA

VT1708S

12 11

2

3

4

17.1cm(6.75in)

SATA3G_1

CPU_FAN CHA_FAN

Intel®

SATA3G_2

SATA3G_3

H61

Super

SATA3G_4

I/O

	32Mb	Power
	BIOS
		Cell
		Lithium
		CMOS
	ATX12V

LGA1155	0.R2 I-P8H61
EPU
SPDIF_OUT
PCIEX16
10

	5
DIMMA1(64bit, 240-pin module)	DIMMB1(64bit, 240-pin module)	EATXPWR	17.1cm(6.75in)
DDR3	DDR3		2
	SPEAKER	PANELF	7
			6
	SB_PWR		8
	DRCT
	CLRTC
	9

1.2.4Layout contents

	Connectors/Jumpers/Slots/LED	Page		Connectors/Jumpers/Slots/LED	Page
1.	USB 2.0 connector (10-1 pin USB78, USB56)	1-17	7.	System panel connector (10-1 pin F_PANEL)	1-13
2.	ATX power connectors (24-pin EATXPWR,	1-13	8.	Standby power LED (SB_PWR)	1-1
	4-pin ATX12V)
3.	Intel® H61 Serial ATA 3.0Gb/s connectors (7-pin	1-15	9.	Clear RTC RAM (3-pin CLRTC)	1-10
	SATA3G_1/2/3/4)
4.	CPU and chassis fan connectors (4-pin	1-14	10.	Intel® LGA1155 CPU socket	1-13
	CPU_FAN, 4-pin CHA_FAN)
5.	DDR3 U-DIMM slots	1-4	11.	Digital audio connector (4-1 pin SPDIF_OUT)	1-16
6.	Speaker Connector (4-pin SPEAKER)	1-16	12.	Front panel audio connector (10-1 pin AAFP)	1-17

1-3	Chapter 1: Product introduction

1.3Central Processing Unit (CPU)

The motherboard comes with a surface mount LGA1155 socket designed for the Intel® 3rd/ 2rd Generation Core™ i7 / Core™ i5 / Core™ i3 / Pentium® / Celeron® processors processors.

Unplug all power cables before installing the CPU.

• Upon purchase of the motherboard, ensure that the PnP cap is on the socket and the socket contacts are not bent. Contact your retailer immediately if the PnP cap is missing, or if you see any damage to the PnP cap/socket contacts/motherboard components. ASUS will shoulder the cost of repair only if the damage is shipment/transit-related.

•Keep the cap after installing the motherboard. ASUS will process Return Merchandise

Authorization (RMA) requests only if the motherboard comes with the cap on the

LGA1155 socket.

•The product warranty does not cover damage to the socket contacts resulting from incorrect CPU installation/removal, or misplacement/loss/incorrect removal of the PnP cap.

1.4System memory

1.4.1Overview

The motherboard comes with two Double Data Rate 3 (DDR3) unbuffered Dual Inline Memory Module (U-DIMM) sockets.

A DDR3 module has the same physical dimensions as a DDR2 DIMM but is notched differently to prevent installation on a DDR2 DIMM socket. DDR3 modules are developed for better performance with less power consumption.

The figure below illustrates the location of the DDR3 DIMM sockets:

DIMMB1

DIMMA1

0.R2

I-P8H61

P8H61-I R2.0 240-pin DDR3 DIMM sockets

Channel	Sockets
Channel A	DIMM_A1
Channel B	DIMM_B1

ASUS P8H61-I R2.0

1-4

1.4.2Memory configurations

You may install 1GB, 2GB, 4GB and 8GB unbuffered non ECC DDR3 U-DIMMs into the DIMM sockets.

• You may install varying memory sizes in ChannelAand Channel B. The system maps the total size of the lower-sized channel for the dual-channel configuration.Any excess memory from the higher-sized channel is then mapped for single-channel operation.

•Always install DIMMs with the same CAS latency. For optimal compatibility, we recommend that you install memory modules of the same version or date code (D/C) from the same vendor. Check with the retailer to get the correct memory modules.

•Due to the memory address limitation on 32-bit Windows® OS, when you install 4GB or more memory on the motherboard, the actual usable memory for the OS can be about 3GB or less. For effective use of memory, we recommend that you do any of the following:

-Use a maximum of 3GB system memory if you are using a 32-bit Windows® OS.

-Install a 64-bit Windows® OS when you want to install 4GB or more on the motherboard.

•This motherboard does not support DIMMs that use 512Mb (64MB) chips or less.

•Memory modules with memory frequency higher than 2133 MHz and its corresponding timing or the loaded X.M.P. Profile is not the JEDEC memory standard. The stability and compatibility of these memory modules depend on the CPU’s capabilities and other installed devices.

• The default memory operation frequency is dependent on its Serial Presence Detect (SPD), which is the standard way of accessing information from a memory module. Under the default state, some memory modules for overclocking may operate at a lower frequency than the vendor-marked value. To operate at the vendor-marked rate or at a higher frequency, refer to section 2.4 Ai Tweaker menu for manual memory frequency adjustment.

•For system stability, use a more efficient memory cooling system to support a full memory load (2 U-DIMMs) or overclocking condition.

1-5	Chapter 1: Product introduction

P8H61-I R2.0 Motherboard Qualified Vendors Lists (QVL)

DDR3-2666 MHz capability

Vendors	Part No.	Size	SS/	Chip	Chip NO.	Timing	Voltage	DIMM socket support
								(Optional)
			DS	Brand
								1 DIMM	2 DIMMs
KINGSTON	KHX2250C9D3T1K2/4GX(XMP)	4GB(2 x 2GB)	DS	-	-	-	1.65V	•	•

DDR3-2600 MHz capability

Vendors	Part No.	Size	SS/	Chip	Chip NO.	Timing	Voltage	DIMM socket support
								(Optional)
			DS	Brand
								1 DIMM	2 DIMMs
KINGSTON	KHX2250C9D3T1K2/4GX(XMP)	4GB(2 x 2GB)	DS	-	-	-	1.65V	•	•

DDR3-2400 MHz capability

Vendors	Part No.	Size	SS/DS	Chip	Chip	Timing	Voltage	DIMM socket
								support (optional)
				Brand	NO.
								1 DIMM	2 DIMM
CORSAIR	CMGTX8(XMP)	8GB (2GBx 4)	SS	-	-	10-12-10-27	1.65V	·	·
G.SKILL	F3-19200CL11Q-16GBZHD(XMP1.3)	16GB ( 4GB x4 )	DS	-	-	11-11-11-31	1.65V	·	·
G.SKILL	F3-19200CL9D-4GBPIS(XMP)	4GB(2x 2GB)	DS	-	-	9-11-9-28	1.65V	·	·
GEIL	GET34GB2400C9DC(XMP)	2GB	DS	-	-	9-11-9-27	1.65V	·	·
KINGMAX	FLLE88F-C8KKAA HAIS(XMP)	2GB	SS	-	-	10-11-10-30	1.8V	·	·
Transcend	TX2400KLU-4GK(427652)(XMP)	4GB(2 x 2GB)	SS	-	-	-	1.65V	·	·
Transcend	TX2400KLU-4GK (381850)(XMP)	4GB(2x 2GB)	SS	-	-		1.65V	·	·
Transcend	TX2400KLU-4GK(374243)(XMP)	4GB(2x 2GB)	DS	-	-		1.65V	·	·
PATRIOT	PVV34G2400C9K(XMP)	4GB(2x 2GB)	DS	-	-	9-11-9-27	1.65V	·	·

DDR3-2250 MHz capability

Vendors	Part No.	Size	SS/	Chip	Chip NO.	Timing	Voltage	DIMM socket support
								(Optional)
			DS	Brand				1 DIMM	2 DIMMs
KINGSTON	KHX2250C9D3T1K2/4GX(XMP)	4GB(2 x 2GB)	DS	-	-	-	1.65V	•	•

DDR3-2200 MHz capability

Vendors	Part No.	Size	SS/DS	Chip	Chip	Timing	Voltage		DIMM socket support
									(Optional)
				Brand	NO.
									1 DIMM	2 DIMM
G.SKILL	F3-17600CL8D-4GBPS(XMP)	4GB(2 x 2GB)	DS	-	-	8-8-8-24	1.65V
GEIL	GET34GB2200C9DC(XMP)	2GB	DS	-	-	9-10-9-28	1.65V	·		·
GEIL	GET38GB2200C9ADC(XMP)	4GB	DS	-	-	9-11-9-28	1.65V	·		·
KINGMAX	FLKE85F-B8KJAA-FEIS(XMP)	2GB	DS	-	-	-	-	·		·
KINGMAX	FLKE85F-B8KHA EEIH(XMP)	4GB(2 x 2GB)	DS	-	-	-	1.5V-1.7V	·		·
KINGMAX	FLKE85F-B8KJA FEIH(XMP)	4GB(2 x 2GB)	DS	-	-	-	1.5V-1.7V	·		·

ASUS P8H61-I R2.0

1-6

DDR3-2133 MHz capability

					Chip	Chip			DIMM socket
	Vendors	Part No.	Size	SS/DS			Timing	Voltage	support (Optional)
					Brand	NO.
									1DIMM	2DIMM
	A-DATA	AX3U2133GC2G9B-DG2(XMP)	2GB	SS	-	-	9-11-9-27	1.55~1.75V	·	·
	CORSAIR	CMT16GX3M4X2133C9(XMP 1.3)	16GB ( 4GB x4 )	DS	-	-	9-11-10-27	1.50V	·	·
	CORSAIR	CMT4GX3M2A2133C9(XMP)	4GB(2x 2GB)	DS	-	-	9-10-9-24	1.65V	·	·
	CORSAIR	CMT4GX3M2B2133C9(XMP)	4GB(2x 2GB)	DS	-	-	9-10-9-27	1.50V	·	·
	CORSAIR	CMT8GX3M2B2133C9(XMP)	8GB ( 4GB x 2)	DS	-	-	9-11-9-27	1.50V	·	·
	G.SKILL	F3-17000CL9Q-16GBZH(XMP1.3)	16GB ( 4GB x4 )	DS	-	-	9-11-10-28	1.65V	·	·
	GEIL	GE34GB2133C9DC(XMP)	2GB	DS	-	-	9-9-9-28	1.65V	·	·
	GEIL	GU34GB2133C9DC(XMP)	4GB(2 x 2GB)	DS	-	-	9-9-9-28	1.65V	·	·
	KINGSTON	KHX2133C11D3T1K2/16GX(XMP)	16GB(8GB x 2)	DS	-	-	-	1.6V	·	·
	KINGSTON	KHX2133C9AD3T1K2/4GX(XMP)	4GB ( 2x 2GB )	DS	-	-	-	1.65V	·	·
	KINGSTON	KHX2133C9AD3X2K2/4GX(XMP)	4GB(2 x 2GB)	DS	-	-	9-11-9-27	1.65V	·	·
	KINGSTON	KHX2133C9AD3T1K4/8GX(XMP)	8GB(4 x 2GB)	DS	-	-	9-11-9-27	1.65V	·	·
	KINGSTON	KHX2133C9AD3T1FK4/8GX(XMP)	8GB(4x 2GB)	DS	-	-	-	1.65V	·	·
	PATRIOT	PGD38G2133C11K(XMP)	16GB ( 4GB x4 )	DS	-	-	11-11-11-30	1.65V	·	·

DDR3-2000 MHz capability

			SS/	Chip				DIMM socket
Vendors	Part No.	Size			Chip NO.	Timing	Voltage	support
			DS	Brand				(Optional)
								1DIMM	2DIMM
Apacer	78.AAGD5.9KD(XMP)	6GB(3 x 2GB)	DS	-	-	9-9-9-27	1.65V	·	·
CORSAIR	CMZ4GX3M2A2000C10(XMP)	4GB(2 x 2GB)	SS	-	-	10-10-10-27	1.50V	·	·
CORSAIR	CMT6GX3M3A2000C8(XMP)	6GB(3 x 2GB)	DS	-	-	8-9-8-24	1.65V	·	·
G.SKILL	F3-16000CL9D-4GBFLS(XMP)	4GB(2 x 2GB)	DS	-	-	9-9-9-24	1.65V	·	·
G.SKILL	F3-16000CL9D-4GBTD(XMP)	4GB(2 x 2GB)	DS	-	-	9-9-9-27	1.65V	·	·
G.SKILL	F3-16000CL6T-6GBPIS(XMP)	6GB (3x 2GB )	DS	-	-	6-9-6-24	1.65V	·	·
GEIL	GUP34GB2000C9DC(XMP)	4GB(2 x 2GB)	DS	-	-	9-9-9-28	1.65V	·	·
KINGSTON	KHX2000C9AD3T1K2/4GX(XMP)	4GB ( 2x 2GB )	DS	-	-	-	1.65V	·	·
KINGSTON	KHX2000C9AD3W1K2/4GX(XMP)	4GB ( 2x 2GB )	DS	-	-	-	1.65V	·	·
KINGSTON	KHX2000C9AD3T1K2/4GX(XMP)	4GB(2 x 2GB)	DS	-	-	9	1.65V	·	·
KINGSTON	KHX2000C9AD3W1K3/6GX(XMP)	6GB ( 3x 2GB )	DS	-	-	-	1.65V	·	·
KINGSTON	KHX2000C9AD3T1K3/6GX(XMP)	6GB (3x 2GB )	DS	-	-	-	1.65V	·	·
Transcend	TX2000KLN-8GK(XMP)	8GB(2 x 4GB)	DS	-	-	-	1.6V	·	·
Asint	SLA302G08-ML2HB(XMP)	4GB	DS	HYNIX	H5TQ2G83BFR H9C	-	-	·	·
PATRIOT	PVT36G2000LLK	6GB(3 x 2GB)	DS	-	-	8-8-8-24	1.65V	·

DDR3-1866 MHz capability

Vendors	Part No.	Size	SS/	Chip	Chip	Timing	Voltage	DIMM socket support
								(Optional)
			DS	Brand	NO.
								1DIMM	2DIMM
A-DATA	AX3U1866PB2G8-DP2(XMP)	2GB	DS	-	-	8-8-8-24	1.55V-1.75V
CORSAIR	CMT4GX3M2A1866C9(XMP)	4GB(2 x 2GB)	DS	-	-	9-9-9-24	1.65V	·	·
CORSAIR	CMT6GX3MA1866C9(XMP)	6GB(3 x 2GB)	DS	-	-	9-9-9-24	1.65V	·	·
CORSAIR	CMZ8GX3M2A1866C9(XMP)	8GB(2 x 4GB)	DS	-	-	9-10-9-27	1.50V	·	·
G.SKILL	F3-14900CL9Q-16GBZL(XMP1.3)	16GB ( 4GB x4 )	DS	-	-	9-10-9-28	1.5V	·	·
G.SKILL	F3-14900CL10Q2-	64GB ( 8GBx 8 )	DS	-	-	10-11-10-30	1.5V	·	·
	64GBZLD(XMP1.3)
G.SKILL	F3-14900CL9D-8GBXL(XMP)	8GB(2 x 4GB)	DS	-	-	9-10-9-28	1.5V	·	·
G.SKILL	F3-14900CL9Q-8GBXL(XMP)	8GB(2GBx4)	DS	-	-	9-9-9-24	1.6V	·	·
KINGSTON	KHX1866C9D3T1K3/3GX(XMP)	3GB(3 x 1GB)	SS	-	-	-	1.65V	·	·
KINGSTON	KHX1866C9D3K4/16GX(XMP)	16GB ( 4GB x4 )	DS	-	-	-	1.65V	·	·
KINGSTON	KHX1866C9D3T1K3/6GX(XMP)	6GB(3 x 2GB)	DS	-	-	-	1.65V	·	·
KINGSTON	KHX1866C11D3P1K2/8G	8GB ( 4GB x 2)	DS	-	-	-	1.5V
KINGSTON	KHX1866C9D3K2/8GX(XMP)	8GB(4GBX2)	DS	-	-	-	1.65V	·	·

1-7	Chapter 1: Product introduction

DDR3-1600 MHz capability

Chip

DIMM socket

Vendors

Part No.

Size

SS/DS

Chip NO.

Timing

Voltage

support

Brand

(Optional)

1DIMM

2DIMM

A-DATA

AM2U16BC2P1

2GB

SS

A-DATA

3CCD-1509A

-

-

·

·

EL1126T

A-DATA

AD31600E001GM(O)U3K

3GB (3 x

SS

-

-

8-8-8-24

1.65V-1.85V

·

1GB)

A-DATA

AX3U1600XB2G79-2X(XMP)

4GB (2 x

DS

-

-

7-9-7-21

1.55V-1.75V

2GB)

A-DATA

AM2U16BC4P2

4GB

DS

A-DATA

3CCD-1509A

-

-

·

·

EL1126T

A-DATA

AX3U1600GC4G9-2G(XMP)

8GB (2 x

DS

-

-

9-9-9-24

1.55V-1.75V

·

·

4GB)

A-DATA

AX3U1600XC4G79-2X(XMP)

8GB (2 x

DS

-

-

7-9-7-21

1.55V-1.75V

·

·

4GB)

CORSAIR

TR3X3G1600C8D(XMP)

3GB (3 x

SS

-

-

8-8-8-24

1.65V

·

·

1GB)

CORSAIR

CMD12GX3M6A1600C8(XMP)

12GB

DS

-

-

8-8-8-24

1.65V

·

·

(6x2GB)

CORSAIR

CMZ32GX3M4X1600C10(XMP)

32GB

DS

-

-

10-10-10-27

1.50V

·

·

(8GBx4)

CORSAIR

CMP4GX3M2A1600C8(XMP)

4GB (2 x

DS

-

-

8-8-8-24

1.65V

·

·

2GB)

CORSAIR

CMP4GX3M2A1600C9(XMP)

4GB (2 x

DS

-

-

9-9-9-24

1.65V

·

·

2GB)

CORSAIR

CMP4GX3M2C1600C7(XMP)

4GB (2 x

DS

-

-

7-8-7-20

1.65V

·

·

2GB)

CORSAIR

CMX4GX3M2A1600C9(XMP)

4GB (2 x

DS

-

-

9-9-9-24

1.65V

·

·

2GB)

CORSAIR

CMX4GX3M2A1600C9(XMP)

4GB (2 x

DS

-

-

9-9-9-24

1.65V

·

·

2GB)

CORSAIR

TR3X6G1600C8 G(XMP)

6GB (3 x

DS

-

-

8-8-8-24

1.65V

·

·

2GB)

CORSAIR

TR3X6G1600C8D G(XMP)

6GB( 3 x

DS

-

-

8-8-8-24

1.65V

·

·

2GB)

CORSAIR

TR3X6G1600C9 G(XMP)

6GB (3 x

DS

-

-

9-9-9-24

1.65V

·

·

2GB)

CORSAIR

CMP8GX3M2A1600C9(XMP)

8GB (2 x

DS

-

-

9-9-9-24

1.65V

·

·

4GB)

CORSAIR

CMZ8GX3M2A1600C7R(XMP)

8GB (2 x

DS

-

-

7-8-7-20

1.50V

·

·

4GB)

CORSAIR

CMX8GX3M4A1600C9(XMP)

8GB(4 x

DS

-

-

9-9-9-24

1.65V

·

·

2GB)

Crucial

BL25664BN1608.16FF(XMP)

6GB(3 x

DS

-

-

-

-

·

·

2GB)

G.SKILL

F3-12800CL9D-2GBNQ(XMP)

2GB (2 x

SS

-

-

9-9-9-24

1.5V

·

·

1GB)

G.SKILL

F3-12800CL7D-4GBRH(XMP)

4GB (2 x

SS

-

-

7-7-7-24

1.6V

·

·

2GB)

G.SKILL

F3-12800CL7D-4GBECO(XMP)

4GB (2 x

DS

-

-

7-7-8-24

XMP 1.35V

·

·

2GB)

G.SKILL

F3-12800CL7D-4GBRM(XMP)

4GB (2 x

DS

-

-

7-8-7-24

1.6V

·

·

2GB)

G.SKILL

F3-12800CL8D-4GBRM(XMP)

4GB (2 x

DS

-

-

8-8-8-24

1.60V

·

·

2GB)

G.SKILL

F3-12800CL9D-4GBECO(XMP)

4GB (2 x

DS

-

-

9-9-9-24

XMP 1.35V

·

·

2GB)

G.SKILL

F3-12800CL9D-4GBRL(XMP)

4GB (2 x

DS

-

-

9-9-9-24

1.5V

·

·

2GB)

G.SKILL

F3-12800CL9T-6GBNQ(XMP)

6GB (3 x

DS

-

-

9-9-9-24

1.5V~1.6V

·

·

2GB)

G.SKILL

F3-12800CL7D-8GBRH(XMP)

8GB (2 x

DS

-

-

7-8-7-24

1.6V

·

·

4GB)

G.SKILL

F3-12800CL8D-8GBECO(XMP)

8GB (2 x

DS

-

-

8-8-8-24

XMP 1.35V

·

·

4GB)

G.SKILL

F3-12800CL9D-8GBRL(XMP)

8GB (2 x

DS

-

-

9-9-9-24

1.5V

·

·

4GB)

GEIL

GET316GB1600C9QC(XMP)

16GB ( 4x

DS

-

-

9-9-9-28

1.6V

·

·

4GB )

GEIL

GV34GB1600C8DC(XMP)

2GB

DS

-

-

8-8-8-28

1.6V

·

·

HYNIX

HMT351U6CFR8C-PB

4GB

DS

HYNIX

H5TQ2G83CFR

-

-

·

·

PBC

KINGMAX

FLGD45F-B8MF7 MAEH(XMP)

1GB

SS

-

-

7

-

KINGMAX

FLGE85F-B8KJ9A FEIS(XMP)

2GB

DS

-

-

-

-

·

·

KINGMAX

FLGE85F-B8MF7 MEEH(XMP)

2GB

DS

-

-

7

-

·

·

(continued on the next page)

ASUS P8H61-I R2.0

1-8

DDR3-1600 MHz capability

Vendors	Part No.	Size	SS/DS	Chip Brand	Chip NO.	Timing	Voltage		DIMM socket
								support (Optional)
									1DIMM	2DIMMs
KINGSTON	KHX1600C9D3P1K2/4G	4GB (2 x	SS	-	-	-	1.5V	·	·
		2GB)
KINGSTON	KHX1600C9D3K3/	12GB	DS	-	-	9-9-9-27	1.65V	·	·
	12GX(XMP)	(3x4GB)
KINGSTON	KHX1600C9D3T1BK3/	12GB	DS	-	-	9-9-9-27	1.65V	·	·
	12GX(XMP)	(3x4GB)
KINGSTON	KHX1600C9D3K4/	16GB (	DS	-	-	-	1.65V	·	·
	16GX(XMP)	4GB x4 )
KINGSTON	KHX1600C9AD3/2G	2GB	DS	-	-	-	1.65V	·	·
KINGSTON	KVR1600D3N11/2G-ES	2GB	DS	KTC	D1288JPNDPLD9U	11-11-11-28	1.35V-1.5V	·	·
KINGSTON	KHX1600C7D3K2/	4GB ( 2x	DS	-	-	-	1.65V	·	·
	4GX(XMP)	2GB )
KINGSTON	KHX1600C8D3K2/	4GB (2 x	DS	-	-	8	1.65V	·	·
	4GX(XMP)	2GB)
KINGSTON	KHX1600C8D3T1K2/	4GB (2 x	DS	-	-	8	1.65V	·	·
	4GX(XMP)	2GB)
KINGSTON	KHX1600C9D3K2/	4GB (2 x	DS	-	-	9	1.65V	·	·
	4GX(XMP)	2GB)
KINGSTON	KHX1600C9D3LK2/	4GB (2 x	DS	-	-	9	XMP 1.35V	·	·
	4GX(XMP)	2GB)
KINGSTON	KHX1600C9D3X2K2/	4GB (2 x	DS	-	-	9-9-9-27	1.65V	·	·
	4GX(XMP)	2GB)
KINGSTON	KHX1600C9D3T1K3/	6GB ( 3x	DS	-	-	-	1.65V	·	·
	6GX(XMP)	2GB )
KINGSTON	KHX1600C9D3K3/	6GB (3 x	DS	-	-	9	1.65V	·	·
	6GX(XMP)	2GB)
KINGSTON	KHX1600C9D3T1BK3/	6GB (3 x	DS	-	-	9-9-9-27	1.65V	·	·
	6GX(XMP)	2GB)
KINGSTON	KHX1600C9D3K2/	8GB (2 x	DS	-	-	9-9-9-27	1.65V	·	·
	8GX(XMP)	4GB)
KINGSTON	KHX1600C9D3P1K2/8G	8GB (2 x	DS	-	-	-	1.5V	·	·
		4GB)
Super Talent	WA160UX6G9	6GB (3 x	DS	-	-	9	-	·	·
		2GB)
Transcend	JM1600KLN-8GK	8GB	DS	Transcend	TK483PCW3	-	-	·	·
		(4GBx2)
AMD	AE32G1609U1-U	2GB	SS	-	23EY4587MB6H11503M	9-9-9-24	1.5V	·	·
AMD	AE34G1609U2-U	4GB	DS	AMD	23EY4587MB6H11503M	9-9-9-24	1.5V	·	·
ASint	SLZ302G08-EGN1C	2GB	SS	Asint	SLZ302G08-GN1C	-	-	·	·
Asint	SLZ3128M8-EGJ1D(XMP)	2GB	DS	Asint	3128M8-GJ1D	9-9-9-24	1.6V	·	·
Asint	SLA302G08-EGG1C(XMP)	4GB	DS	Asint	302G08-GG1C	-	-	·	·
Asint	SLA302G08-EGJ1C(XMP)	4GB	DS	Asint	302G08-GJ1C	-	-	·	·
ASint	SLA302G08-EGN1C	4GB	DS	Asint	SLA302G08-GN1C	-	-	·	·
ASint	SLB304G08-EGN1B	8GB	DS	Asint	SLB304G08-GN1B	-	-	·	·
Elixir	M2P2G64CB8HC9N-	2GB	DS	-	-	-	-	·	·
	DG(XMP)
Mushkin	998659(XMP)	6GB (3 x	DS	-	-	9-9-9-24	-	·	·
		2GB)
Mushkin	998659(XMP)	6GB (3 x	DS	-	-	9-9-9-24	1.5~1.6V	·	·
		2GB)
PATRIOT	PGD316G1600ELK(XMP)	32GB	DS	-	-	9-9-9-24	1.65V	·	·
		(8GBx4)
PATRIOT	PGS34G1600LLKA	4GB (2 x	DS	-	-	7-7-7-20	1.7V	·	·
		2GB)
SanMax	SMD-4G68HP-16KZ	4GB	DS	HYNIX	H5TQ2G83BFR PBC	-	-	·	·
Silicon Power	SP002GBLTU160V02(XMP)	2GB	SS	S-POWER	20YT5NG-1201	-	-	·	·
Silicon Power	SP004GBLTU160V02(XMP)	4GB	DS	S-POWER	20YT5NG-1201	-	-	·	·

1-9	Chapter 1: Product introduction

DDR3-1333 MHz capability

								DIMM socket
Vendors	Part No.	Size	SS/	Chip Brand	Chip NO.	Timing	Voltage	support
								(Optional)
			DS					1	2
								DIMM	DIMMs
A-Data	AD31333001GOU	1GB	SS	A-Data	AD30908C8D-151C	-	-	•	•
					E0906
A-Data	AD31333G001GOU	3GB(3 x 1GB)	SS	-	-	8-8-8-24	1.65-1.85V	•	•
A-Data	AD31333002GOU	2GB	DS	A-Data	AD30908C8D-151C	-	-	•	•
					E0903
A-Data	AD31333G002GMU	2GB	DS	-	-	8-8-8-24	1.65-1.85V	•	•
Apacer	78.A1GC6.9L1	2GB	DS	APACER	AM5D5808DEWSBG	-	-	•	•
Apacer	78.A1GC6.9L1	2GB	DS	Apacer	AM5D5808FEQSBG	9	-	•	•
CORSAIR	CM3X1024-1333C9DHX	1GB	SS	-	-	9-9-9-24	1.60V	•	•
CORSAIR	CM3X1024-1333C9	1GB	SS	-	-	9-9-9-24	1.60V	•	•
CORSAIR	TR3X3G1333C9 G	3GB(3 x 1GB)	SS	-	-	9-9-9-24	1.50V	•	•
CORSAIR	TR3X3G1333C9 G	3GB(3 x 1GB)	SS	-	-	9-9-9-24	1.50V
CORSAIR	CM3X1024-1333C9DHX	1GB	DS	Corsair	-	-	-	•	•
CORSAIR	CMD24GX3M6A1333C9(XMP)	24GB(6x4GB)	DS	-	-	9-9-9-24	1.60V	•
CORSAIR	CM3X2048-1333C9DHX	2GB	DS	-	-	-	-
CORSAIR	CMX8GX3M4A1333C9	8GB(4 x 2GB)	DS	-	-	9-9-9-24	1.50V	•	•
Crucial	CT12864BA1339.8FF	1GB	SS	Micron	9FF22D9KPT	9	-	•	•
Crucial	CT25664BA1339.16FF	2GB	DS	Micron	9KF27D9KPT	9	-	•	•
Crucial	BL25664BN1337.16FF (XMP)	6GB(3 x 2GB)	DS	-	-	7-7-7-24	1.65V	•	•
ELPIDA	EBJ10UE8EDF0-DJ-F	1GB	SS	ELPIDA	J1108EDSE-DJ-F	-	1.35V(low	•	•
							voltage)
ELPIDA	EBJ21UE8EDF0-DJ-F	2GB	DS	ELPIDA	J1108EDSE-DJ-F	-	1.35V(low	•	•
							voltage)
G.SKILL	F3-10600CL8D-2GBHK(XMP)	1GB	SS	G.SKILL	-	-	-	•	•
G.SKILL	F3-10666CL7T-3GBPK(XMP)	3GB(3 x 1GB)	SS	-	-	7-7-7-18	1.5~1.6V	•	•
G.SKILL	F3-10666CL9T-3GBNQ	3GB(3 x 1GB)	SS	-	-	9-9-9-24	1.5~1.6V	•	•
G.SKILL	F3-10600CL9D-2GBNQ	1GB	DS	G.SKILL	-	-	-
G.SKILL	F3-10600CL8D-4GBHK(XMP)	4GB(2 x 2GB)	DS	-	-	8-8-8-21	1.5-1.6V	•	•
G.SKILL	F3-10666CL8D-4GBECO(XMP)	4GB(2 x 2GB)	DS	-	-	8-8-8-	XMP 1.35V	•	•
						8-24
G.SKILL	F3-10666CL7T-6GBPK(XMP)	6GB(3 x 2GB)	DS	-	-	7-7-7-18	1.5~1.6V	•	•
G.SKILL	F3-10666CL7D-8GBRH(XMP)	8GB(2 x 4GB)	DS	-	-	7-7-7-21	1.5V	•	•
G.SKILL	F3-10666CL9D-8GBRL	8GB(2 x 4GB)	DS	-	-	9-9-9-24	1.5V	•	•
GEIL	GET316GB1333C9QC	16GB ( 4x	DS	-	-	9-9-9-24	1.5V
		4GB )
GEIL	GV32GB1333C9DC	2GB(2 x 1GB)	DS	-	-	9-9-9-24	1.5V	•	•
GEIL	GV34GB1333C7DC	2GB	DS	-	-	7-7-7-24	1.5V
GEIL	GG34GB1333C9DC	4GB(2 x 2GB)	DS	GEIL	GL1L128M88BA12N	9-9-9-24 1.3V(low
							voltage)
GEIL	GV34GB1333C9DC	4GB(2 x 2GB)	DS	-	-	9-9-9-24	1.5V	•	•
Hynix	HMT112U6TFR8A-H9	1GB	SS	HYNIX	H5TC1G83TFRH9A	-	1.35V(low	•	•
							voltage)
HYNIX	HMT325U6BFR8C-H9	2GB	SS	HYNIX	H5TQ2G83BFRH9C	-	-	•	•
Hynix	HMT125U6TFR8A-H9	2GB	DS	HYNIX	H5TC1G83TFRH9A	-	1.35V(low	•	•
							voltage)
HYNIX	HMT351U6BFR8C-H9	4GB	DS	HYNIX	H5TQ2G83BFRH9C	-	-	•	•
KINGMAX	FLFD45F-B8KL9 NAES	1GB	SS	KINGMAX	KKB8FNWBFGNX-27A	-	-	•	•
KINGMAX	FLFE85F-C8KF9 CAES	2GB	SS	KINGMAX	KFC8FMFXF-DXX-15A	-	-	•	•
KINGMAX	FLFE85F-C8KM9 NAES	2GB	SS	KINGMAX	KFC8FNMXF-	-	-	•	•
					BXX-15A
KINGMAX	FLFE85F-B8KL9 NEES	2GB	DS	KINGMAX	KKB8FNWBFGNX-26A	-	-	•	•
KINGMAX	FLFF65F-C8KM9 NEES	4GB	DS	KINGMAX	KFC8FNMXF-	-	-	•	•
					BXX-15A
Kingston	KVR1333D3N9/1G	1GB	SS	ELPIDA	J1108BDBG-DJ-F	9	1.5V	•	•
KINGSTON	KVR1333D3N9/2G	2GB	SS	HYNIX	H5TQ2G83AFRH9C	9	-	•	•
KINGSTON	KVR1333D3N9/2G(low profile)	2GB	DS	ELPIDA	J1108BDBG-DJ-F	9	1.5V	•	•
Kingston	KVR1333D3N9/2G	2GB	DS	KTC	D1288JPNDPLD9U	9	1.5V	•	•
Kingston	KVR1333D3N9/2G	2GB	DS	ELPIDA	J1108BDSE-DJ-F	9	1.5V	•	•

(continued on the next page)

ASUS P8H61-I R2.0

1-10