Asus R1505I-IM-B, R1305I-IM-B, V1605I-IM-B User’s Manual

0 (0)

V1605I-IM-B R1505I-IM-B R1305I-IM-B

User Manual

E17669

First Edition

February 2021

No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”).

ASUS PROVIDES THIS MANUAL “AS IS”WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE), EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.

Products and corporate names appearing in this manual may or may not be registered trademarks or copyrights of their respective companies, and are used only for identification or explanation and to the owners’ benefit, without intent to infringe.

SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE, AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.

LIMITATION OF LIABILITY

Circumstances may arise where because of a default on ASUS’ part or other liability, you are entitled to recover damages from ASUS. In each such instance, regardless of the basis on which you are entitled to claim damages from ASUS, ASUS is liable for no more than damages for bodily injury (including death) and damage to real property and tangible personal property; or any other actual and direct damages resulted from omission or failure of performing legal duties under this Warranty Statement, up to the listed contract price of each product.

ASUS will only be responsible for or indemnify you for loss, damages or claims based in contract, tort or infringement under this Warranty Statement.

This limit also applies to ASUS’ suppliers and its reseller. It is the maximum for which ASUS, its suppliers, and your reseller are collectively responsible.

UNDER NO CIRCUMSTANCES IS ASUS LIABLE FOR ANY OF THE FOLLOWING: (1) THIRD-PARTY CLAIMS AGAINST YOU FOR DAMAGES;

(2) LOSS OF, OR DAMAGE TO, YOUR RECORDS OR DATA; OR (3) SPECIAL, INCIDENTAL, OR INDIRECT DAMAGES OR FOR ANY ECONOMIC CONSEQUENTIAL DAMAGES (INCLUDING LOST PROFITS OR SAVINGS), EVEN IF ASUS, ITS SUPPLIERS OR YOUR RESELLER IS INFORMED OF THEIR POSSIBILITY.

SERVICE AND SUPPORT

Visit our multi-language web site at https://www.asus.com/support/

Contents


About this manual.................................................................................................................................................................				5
	Conventions used in this manual................................................................................................................................................			5
	Typography.........................................................................................................................................................................................			5
Package contents...................................................................................................................................................................				6
Chapter 1:			Specifications Summary
V1605I-IM-B / R1505I-IM-B / R1305I-IM-B Specifications Summary.....................................................................				8
Chapter 2:			Product Introduction
2.1	Before you proceed......................................................................................................................................................			12
2.2	Motherboard layout.....................................................................................................................................................			13
2.3	System memory.............................................................................................................................................................			15
2.4	Onboard jumpers..........................................................................................................................................................			16
2.5	Internal connectors......................................................................................................................................................			20
2.6	I/O connectors................................................................................................................................................................			32
Chapter 3:			Upgrading your Industrial motherboard
3.1	Installing memory modules......................................................................................................................................			34
3.2	Installing 2.5” storage device....................................................................................................................................			35
3.3	Installing an M.2 SSD....................................................................................................................................................			36
3.4	Installing the wireless card........................................................................................................................................			37
3.6	Installing the backplane.............................................................................................................................................			38
Chapter 4:			BIOS Setup
4.1	Getting to know your BIOS........................................................................................................................................			40
4.2	BIOS setup program.....................................................................................................................................................			40
4.3	Main Menu.......................................................................................................................................................................			42
	4.3.1	System Date [Day xx/xx/xxxx].......................................................................................................................................		42
	4.3.2	System Time [xx:xx:xx].....................................................................................................................................................		42
4.4	Advanced menu............................................................................................................................................................			43
	4.4.1	Graphic Configuration.....................................................................................................................................................		44
	4.4.2	CPU Configuration............................................................................................................................................................		44
	4.4.3	Watchdog Timer................................................................................................................................................................		44
	4.4.4	CSM Configuration...........................................................................................................................................................		45
	4.4.5	Super IO Configuration...................................................................................................................................................		45
	4.4.6	Serial Console Redirection.............................................................................................................................................		47
	4.4.7	SATA Configuration...........................................................................................................................................................		49
	4.4.8	USB Configuration............................................................................................................................................................		49
	4.4.9	Trusted Computing..........................................................................................................................................................		51
	4.4.10	NVMe Configuration........................................................................................................................................................		51
	4.4.11	Onboard Devices Configuration..................................................................................................................................		51
	4.4.12	APM Configuration...........................................................................................................................................................		52
	4.4.13	Network Stack Configuration........................................................................................................................................		52
	4.4.14	AMD CBS...............................................................................................................................................................................		53
	4.4.15	AMD PBS...............................................................................................................................................................................		55
	4.4.16	EZ-Flash.................................................................................................................................................................................		55
4.5	Hardware Monitor menu............................................................................................................................................			56
4.6	Security.............................................................................................................................................................................			58
4.7	Boot menu.......................................................................................................................................................................			60

Industrial motherboard

4.8	Exit menu.........................................................................................................................................................................		62
4.9	Updating your BIOS......................................................................................................................................................		64
	4.9.1	ASUS CrashFree BIOS.......................................................................................................................................................	64
	4.9.2	ASUS EzFlash Utility..........................................................................................................................................................	64
Appendix
Safety information.................................................................................................................................................................			68
	Setting up your system...................................................................................................................................................................		68
	Care during use..................................................................................................................................................................................		68
Regulatory notices.................................................................................................................................................................			69
ASUS contact information..................................................................................................................................................			72

4 Industrial motherboard

About this manual

This manual provides information about the hardware and software features of your Industrial motherboard, organized through the following chapters:

Chapter 1: Specifications Summary

This chapter details the hardware and software features of your Industrial motherboard.

Chapter 2: Product Introduction

This chapter describes the features of the motherboard. It includes description of the connectors, and I/O ports on the motherboard.

Chapter 3: Upgrading your Industrial motherboard

This chapter provides you with information on how to upgrade the memory modules, wireless modules, and hard disk drive / solid state drive of your Industrial motherboard.

Chapter 4: BIOS Setup

This chapter tells how to change system settings through the BIOS Setup menus. Detailed descriptions of the BIOS parameters are also provided.

Appendix

This section includes notices and safety statements your Industrial motherboard.

Conventions used in this manual

To highlight key information in this manual, some text are presented as follows:

IMPORTANT! This message contains vital information that must be followed to complete a task.

NOTE: This message contains additional information and tips that can help complete tasks.

WARNING! This message contains important information that must be followed to keep you safe while performing certain tasks and prevent damage to your Industrial motherboard's data and components.

Typography

Bold text	Indicates a menu or an item to select.
Italic	This indicates sections that you can refer to in this manual.

Industrial motherboard

Package contents

Your Industrial motherboard package contains the following items:

•1 x V1605I-IM-B / R1505I-IM-B /R1305I-IM-B industrial motherboard

•1 x Fansink

•1 x SATA 6G cable

•1 x M.2 screw pack

•1 x I/O shield

•1 x Fansink backplane

NOTE:

•Some bundled accessories may vary with different models. For details on these accessories, refer to their respective user manuals.

•The device illustration is for reference only. Actual product specifications may vary with models.

•If the device or its components fail or malfunction during normal and proper use within the warranty period, bring the warranty card to the ASUS Service Center for replacement of the defective components.

6 Industrial motherboard

Specifications Summary

V1605I-IM-B / R1505I-IM-B / R1305I-IM-B

Specifications Summary

APU

Processor

Chipset

Technology

Memory Max.

Socket

Display Port

LVDS (default option)

Graphics

eDP (optional)

Multi Display

PCIe

Expansion slot

M.2

Speed

Ethernet Controller

Connector

Codec

Audio Connector

V1605I-IM-B	R1505I-IM-B	R1305I-IM-B

AMD Ryzen™ Embedded V1605B	AMD Ryzen™ Embedded R1505G	AMD Ryzen™ Embedded R1305G
APUs 2GHz Quad-core	APUs 2.4GHz Dual-core	APUs 1.5 GHz Dual core
Integrated

DDR4 2400MHz, ECC support

32GB

2 x SO DIMM

3 x DP++ supports DisplayPort	2 x DP++ supports DisplayPort	2 x DP++ supports DisplayPort
1.4 with max. resolution 4096	1.4 with max. resolution 3840	1.4 with max. resolution 3840
x 2160 @ 60 Hz	x 2160 @ 60 Hz	x 2160 @ 60 Hz
1 x DP++ supports DisplayPort	1 x DP++ supports DisplayPort	1 x DP++ supports DisplayPort
1.4 with max. resolution 4096	1.4 with max. resolution 3840	1.4 with max. resolution 4096
x 2160 @ 60 Hz (Optional,	x 2160 @ 60 Hz (Optional,	x 2160 @ 60 Hz (Optional,
shared with LVDS and eDP)	shared with LVDS and eDP)*	shared with LVDS and eDP)*
	* DP3 is not supported	* DP3 is not supported

1 x LVDS supports LVDS with max. resolution 1920 x 1200 @ 60 Hz (Optional, shared with DisplayPort1 and eDP)

1 x eDP supports eDP 1.3 with max. resolution 3840 x 2160 @ 60 Hz (Optional, shared with DisplayPort1 and LVDS)

Default: 3DP+LVDS	Default: 2DP+LVDS	Default: 2DP+LVDS
Optional: 4DP / 3DP +eDP	Optional: 3DP / 2DP +eDP	Optional: 3DP / 2DP +eDP
Supports up to 4 displays	Supports up to 3 displays	(DP3 is not supported)
simultaneous under OS	simultaneous under OS	Supports up to 3 displays
		simultaneous under OS
		Support up to two 4K static
		displays , or three 1080p static
		displays
1x PCIe 3.0 x8 slot	1x PCIe 3.0 x8 slot	1x PCIe 3.0 x8 slot
(support x8 interface)	(support x4 interface)	(support x4 interface, graphics
		card not supported)
1 x M.2 (key M 2242 / 2260 /	1 x M.2 (key M 2242 / 2260 / 2280) PCIe x2 (NVME) / SATA
2280) PCIe x2 (NVME) / SATA
1x M.2 E key for PCIe / USB 2.0
support 2230 (width up to 22
mm)
10/100/1000Mbps
2 x Realtek® 8111H
2 x RJ45
Realtek® ALC897 codec

2 x Audio jacks (1 x Mic in, 1 x Line out) 2 x 2W Stereo Speaker output

1 x 5.1 channel (Internal pin header)

(continued on the next page)

8 Industrial motherboard

4 x Serial ports (RS-232), COM3 supports cctalk & COM4 supports TTL (optional)

1 x USB 2.0 Type A vertical connector

1 x USB 2.0 header (supports additional 2 x USB 2.0 connectors) 1 x CPU Fan connector (PWM Mode)

1 x Chassis Fan header (PWM Mode)

1 x Chassis Intrusion header

2 x Front Panel Audio header (AAFP)

1 x System Panel header

1 x Clear CMOS jumper

2 x SATA power headers

1 x LPC Debug header

1 x S/PDIF header

1 x I2C header

1 x GPIO header

1 x AT/ATX Select header

1 x 4-pin Power connector

V1605I-IM-B

R1505I-IM-B

R1305I-IM-B

Storage

Rear I/O

Internal Connector

Watchdog Timer (H/W)

	Security	TPM
	Power	Power Type
	Power	Voltage
		Voltage
	Operating System

Option 1 (Default):

-1 x SATA port Gen 3.0, up to 6Gb/s

-1 x M.2 (Key M, 2242 / 2260 / 2280) PCIe x2 and SATA mode*

-1 x CFAST*

*If CFAST is enabled, M.2 SATA mode will be disabled, and vice versa. You may configure this setting in the BIOS.

Option 2 (per request):

-2 x SATA port Gen 3.0, up to 6Gb/s

-1 x M.2 (Key M, 2242 / 2260 / 2280) PCIe x2

3 x DisplayPorts	2 x DisplayPorts
1 x Additional display output port 1 x Additional display output port (LVDS*, DisplayPort, or eDP)
(LVDS*, DisplayPort, or eDP)	2 x USB 3.2 Gen 2 Type A ports
2 x USB 3.2 Gen 2 Type A ports	2 x USB 2.0 ports
2 x USB 2.0 ports	2 x Ethernet ports
2 x Ethernet ports	2 x COM connectors
2 x COM connectors	(RS232 / 422 / 485)
(RS232 / 422 / 485)	1 x Mic in + Line out jack
1 x Mic in + Line out jack	1 x DC-in jack
1 x DC-in jack	* Default option.
* Default option.

4 x Serial ports (RS-232), COM3 supports cctalk & COM4 supports TTL (optional)

1 x USB 3.2 Gen 1 Type A vertical connector

1 x USB 2.0 header (supports additional 2 x USB 2.0 connectors)

1 x CPU Fan connector (PWM Mode)

1 x Chassis Fan header (PWM Mode)

1 x Chassis Intrusion header

2 x Front Panel Audio header (AAFP)

1 x System Panel header

1 x Clear CMOS jumper

2 x SATA power headers

1 x LPC Debug header

1 x S/PDIF header

1 x I2C header

1 x GPIO header

1 x AT/ATX Select header

1 x 4-pin Power connector

Yes

1 x SPI TPM header

DC-in (ATX and AT mode supported)

DC-in 12V ~ 24V

Microsoft Windows

Windows® 10 (64-bit ) / Win10 IoT Enterprise

Linux

Ubuntu, RedHat Enterprise, Fedora Workstation, OpenSUSE

(continued on the next page)

Industrial motherboard

Environment

Dimension	Form Factor
Certification	Safety

V1605I-IM-B

R1505I-IM-B

R1305I-IM-B

Operating Temperature: 0~60° C

Non-Operating Temperature: -40~85° C

Relative Humidity: 0%~85%

Mini-ITX, 170 x 170 mm

CE, FCC

NOTE: Specifications are subject to change without notice.

10 Industrial motherboard

Product Introduction

2.1Before you proceed

Take note of the following precautions before you install motherboard components or change any motherboard settings.

NOTE: The diagrams in this chapter are for reference only. The motherboard layout may vary with models.

IMPORTANT! Components shown in this section may require additional purchase. Refer to Package contents section for more information about the contents of your Industrial motherboard package.

WARNING!

•Unplug the power cord from the wall socket before touching any component.

•Before handling components, use a grounded wrist strap or touch a safely grounded object or a metal object, such as the power supply case, to avoid damaging them due to static electricity.

•Hold components by the edges to avoid touching the ICs on them.

•Whenever you uninstall any component, place it on a grounded antistatic pad or in the bag that came with the component.

•Before you install or remove any component, ensure that the ATX power supply is switched off or the power cord is detached from the power supply. Failure to do so may cause severe damage to the motherboard, peripherals, or components.

12 Industrial motherboard

Asus R1505I-IM-B, R1305I-IM-B, V1605I-IM-B User’s Manual

2.2Motherboard layout

Industrial motherboard

Layout contents		Page
1.	DC-in 4-Pin Power connector	31
2.	Flat panel display brightness connector	23
3.	EDP Signal connector	23
4.	SPI TPM header	26
5.	I2C header	24
6.	SATADOM Power jumper	18
7.	Low Pin Count connector	22
8.	SATA 6Gb/s & SATA Power connector	20
9.	Internal USB Type-A connector	28
10.	USB 2.0 header	27
11.	Fan header	29
12.	AT/ATX Mode Configuration jumper	19
13.	HW WDT Enable jumper	18
14.	CFAST connector	24
15.	System Panel header	30
16.	Chassis Intrusion header	28
17.	Front panel audio connector	29
18.	Digital Audio header	31
19.	Stereo Out header	25
20.	DIMM slot	15
21.	Display Panel VCC Power Selection jumper	19
22.	LVDS connector	21
23.	BIOS socket	26
24.	Back Light Power Selection jumper	17
25.	Back Light Power Enable Mode jumper	17
26.	Clear RTC RAM jumper	16
27.	M.2 Wi-Fi slot	20
28.	Serial Port connector	27
29.	GPIO connector	25
30.	M.2 M-Key slot	21
31.	Battery connector	22

14 Industrial motherboard

2.3System memory

The motherboard comes with two (2) Small Outline Dual Inline Memory Module (SODIMM) slot designed for DDR4 memory modules.

Industrial motherboard

2.4Onboard jumpers

1.Clear RTC RAM jumper

The Clear RTC RAM jumper allows you to clear the Real Time Clock (RTC) RAM in the CMOS, which contains the date, time, system passwords, and system setup parameters.

To erase the RTC RAM:

1.Turn OFF the computer and unplug the power cord.

2.Short-circuit pin 1-2 with a metal object or jumper cap for about 5-10 seconds.

3.Plug the power cord and turn ON the computer.

4.Hold down the <Del> key during the boot process and enter BIOS setup to re-enter data.

WARNING! DO NOT remove the jumper cap from its default position except when clearing the RTC RAM. Removing the jumper cap will cause system boot failure!

NOTE: If the steps above do not help, remove the onboard button cell battery and move the jumper again to clear the CMOS RTC RAM data. After clearing the CMOS, reinstall the button cell battery.

16 Industrial motherboard

2.Back Light Power Enable Mode jumper

The Back Light Power Enable Mode jumper allow you to select the High/Low active for the LVDS power enable.

3.Back Light Power Selection jumper

The Back Light Power Selection jumper allows you to select the voltage for the LVDS back light module.

Industrial motherboard

4.SATADOM Power jumper

Set to pin 1-2 to enable SATA DOM power to support SATADOM device.

NOTE: Only set the pins to 1-2 when using a SATA DOM device.

5.HW WDT Enable jumper

A watchdog timer is an electronic timer that is used to detect and recover from computer malfunctions. The HW WDT (watchdog timer) Enable jumper allows the HW watchdog resets the system automatically even when the system crashes.

NOTE: The default setting for this jumper is set to HW WDT enabled with a jumper cap attached.

18 Industrial motherboard

6.AT/ATX Mode Configuration jumper

The AT/ATX Mode Configuration jumper allows you to switch between AT or ATX modes. The default setting for this jumper is set to AT mode with a jumper on pins 1-2, to switch to ATX mode move the jumper to pins 2-3.

7.Display Panel VCC Power Selection jumper

The Display Panel VCC Power Selection jumper allows you to select the voltage for the panel power.

Industrial motherboard

2.5Internal connectors

1.SATA 6Gb/s & SATA Power connector

The SATA 6Gb/s and SATA Power connectors allow you to connect a SATA DOM or SATA devices such as optical disc drives and hard disk drives via a SATA cable and power cable.

Connector type

Wafer HD 4P, 2.0mm pitch

NOTE:

•Ensure to use the bundled cable when connecting a storage device to this connector with a SATA cable.

•We strongly recommend using a SATA DOM with the dimensions of 40.4 x 21.03 x 10.4 mm (W x L x H) when you wish to install a SATA DOM as well as a USB flash drive to the Internal USB Type-A connector.

2.M.2 Wi-Fi slot

The M.2 Wi-Fi slot allows you to install an M.2 Wi-Fi module (E-key, type 2230).

NOTE: The M.2 Wi-Fi module is purchased separately.

20 Industrial motherboard

3.M.2 M-Key slot

The M.2 M-Key slot allows you to install a 2242, 2260, or 2280 M.2 devices such as 2242, 2260, or 2280 M.2 SSD modules.

NOTE: The M.2 SSD module is purchased separately.

4.LVDS connector

The LVDS connector allows you to connect a LCD monitor that supports a Low-voltage Differential Signaling (LVDS) interface.

Connector type

WAFER HD 2X15P 1.25MM pitch

Industrial motherboard

5.Low Pin Count connector

The Low Pin Count connector allows you to connect a low pin count (LPC) debug card that offers a faster, more efficient motherboard troubleshooting solution. When connected to a debug card, users can view error and debugging codes on the card and get a better idea of initialization and recovery processes.

Connector type

BOX header 2x5p, K10, 2.0mm pitch

6.Battery connector

The Battery connector allows you to connect the lithium CMOS battery.

22 Industrial motherboard

+ 50 hidden pages