H110M2 D3
Motherboard
E10537
First Edition
September 2015
Copyright © 2015 ASUSTeK COMPUTER INC. All Rights Reserved.
No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”).
Product warranty or service will not be extended if: (1) the product is repaired, modified or altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2) the serial number of the product is defaced or missing.
ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE), EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.
SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE, AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS MANUAL, INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.
Products and corporate names appearing in this manual may or may not be registered trademarks or copyrights of their respective companies, and are used only for identification or explanation and to the owners’ benefit, without intent to infringe.
Offer to Provide Source Code of Certain Software
This product contains copyrighted software that is licensed under the General Public License (“GPL”), under the Lesser General Public License Version (“LGPL”) and/or other Free Open Source Software Licenses. Such software in this product is distributed without any warranty to the extent permitted by the applicable law. Copies of these licenses are included in this product.
Where the applicable license entitles you to the source code of such software and/or other additional data, you may obtain it for a period of three years after our last shipment of the product, either
(1)for free by downloading it from http://support.asus.com/download
or
(2)for the cost of reproduction and shipment, which is dependent on the preferred carrier and the location where you want to have it shipped to, by sending a request to:
ASUSTeK Computer Inc.
Legal Compliance Dept.
15 Li Te Rd.,
Beitou, Taipei 112
Taiwan
In your request please provide the name, model number and version, as stated in the About Box of the product for which you wish to obtain the corresponding source code and your contact details so that we can coordinate the terms and cost of shipment with you.
The source code will be distributed WITHOUT ANY WARRANTY and licensed under the same license as the corresponding binary/object code.
This offer is valid to anyone in receipt of this information.
ASUSTeK is eager to duly provide complete source code as required under various Free Open Source Software licenses. If however you encounter any problems in obtaining the full corresponding source code we would be much obliged if you give us a notification to the email address gpl@asus.com, stating the product and describing the problem (please DO NOT send large attachments such as source code archives, etc. to this email address).
ii
Contents
Safety information....................................................................................... |
iv |
About this guide.......................................................................................... |
iv |
Package contents........................................................................................ |
vi |
H110M2 D3 specifications summary......................................................... |
vi |
Chapter 1: |
Product introduction |
|
|
1.1 |
Before you proceed...................................................................... |
1-1 |
|
1.2 |
Motherboard overview................................................................. |
1-1 |
|
1.3 |
Central Processing Unit (CPU).................................................... |
1-3 |
|
1.4 |
System memory............................................................................ |
1-7 |
|
1.5 |
Expansion slots.......................................................................... |
1-10 |
|
1.6 |
Headers |
........................................................................................ |
1-11 |
1.7 |
Connectors.................................................................................. |
1-13 |
|
1.8 |
Software ........................................................................support |
1-21 |
|
1.9 |
Installing ..................................................an operating system |
1-22 |
Chapter 2: |
BIOS information |
|
|
2.1 |
Managing and updating your BIOS............................................. |
2-1 |
|
2.2 |
BIOS setup program..................................................................... |
2-6 |
|
2.3 |
My Favorites................................................................................ |
2-11 |
|
2.4 |
Main menu................................................................................... |
2-12 |
|
2.5 |
Ai Tweaker menu........................................................................ |
2-13 |
|
2.6 |
Advanced menu.......................................................................... |
2-14 |
|
2.7 |
Monitor menu.............................................................................. |
2-14 |
|
2.8 |
Boot menu................................................................................... |
2-15 |
|
2.9 |
Tool menu.................................................................................... |
2-15 |
|
2.10 |
Exit menu..................................................................................... |
2-16 |
|
Appendices |
|
|
|
Notices....................................................................................................... |
|
A-1 |
|
ASUS contact information........................................................................ |
A-4 |
iii
Electrical safety
•To prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system.
•When adding or removing devices to or from the system, ensure that the power cables for the devices are unplugged before the signal cables are connected. If possible, disconnect all power cables from the existing system before you add a device.
•Before connecting or removing signal cables from the motherboard, ensure that all power cables are unplugged.
•Seek professional assistance before using an adapter or extension cord. These devices could interrupt the grounding circuit.
•Ensure that your power supply is set to the correct voltage in your area. If you are not sure about the voltage of the electrical outlet you are using, contact your local power company.
•If the power supply is broken, do not try to fix it by yourself. Contact a qualified service technician or your retailer.
Operation safety
•Before installing the motherboard and adding components, carefully read all the manuals that came with the package.
•Before using the product, ensure all cables are correctly connected and the power cables are not damaged. If you detect any damage, contact your dealer immediately.
•To avoid short circuits, keep paper clips, screws, and staples away from connectors, slots, sockets and circuitry.
•Avoid dust, humidity, and temperature extremes. Do not place the product in any area where it may be exposed to moisture.
•Place the product on a stable surface.
•If you encounter technical problems with the product, contact a qualified service technician or your retailer.
This user guide contains the information you need when installing and configuring the motherboard.
How this guide is organized
This guide contains the following parts:
•Chapter 1: Product introduction
This chapter describes the features of the motherboard and the new technology it supports. It includes descriptions of the switches, jumpers, and connectors on the motherboard.
•Chapter 2: BIOS information
This chapter discusses changing system settings through the BIOS Setup menus. Detailed descriptions for the BIOS parameters are also provided.
iv
Where to find more information
Refer to the following sources for additional information and for product and software updates.
1.ASUS websites
The ASUS website provides updated information on ASUS hardware and software products. Refer to the ASUS contact information.
2.Optional documentation
Your product package may include optional documentation, such as warranty flyers, that may have been added by your dealer. These documents are not part of the standard package.
Conventions used in this guide
To ensure that you perform certain tasks properly, take note of the following symbols used throughout this manual.
DANGER/WARNING: Information to prevent injury to yourself when completing a task.
CAUTION: Information to prevent damage to the components when completing a task
IMPORTANT: Instructions that you MUST follow to complete a task.
NOTE: Tips and additional information to help you complete a task.
Typography
Bold text |
Indicates a menu or an item to select. |
Italics |
Used to emphasize a word or a phrase. |
<Key> |
Keys enclosed in the less-than and greater-than sign |
|
means that you must press the enclosed key. |
|
Example: <Enter> means that you must press the Enter or |
|
Return key. |
<Key1> + <Key2> + <Key3> |
If you must press two or more keys simultaneously, the key |
|
names are linked with a plus sign (+). |
v
Check your motherboard package for the following items.
Motherboard |
ASUS H110M2 D3 motherboard |
|
|
|
|
Cables |
2 x Serial ATA 6.0 Gb/s cables |
|
|
|
|
Accessories |
1 x I/O Shield |
|
|
|
|
Application DVD |
Support DVD |
|
|
|
|
Documentation |
User Guide |
|
|
|
|
|
|
|
If any of the above items is damaged or missing, contact your retailer.
CPU
Chipset
Memory
Graphics
Expansion slots
Storage
LGA1151 socket for 6th Generation Intel® Core™ i7/ i5/ i3/Pentium®/ Celeron® Processors*
Supports 14nm CPU
Supports Intel® Turbo Boost Technology 2.0*
*The Intel® Turbo Boost Technology 2.0 support depends on the CPU types.
**Refer to www.asus.com for Intel® CPU support list.
Intel® H110 Express Chipset
4 x DIMM, max. 32GB, DDR3 1600/1333/1066MHz, non-ECC, un-buffered memory**
Support Intel® Extreme Memory Profile (XMP)
*Due to Intel® chipset limitation, this motherboard can only support single-side memories when four modules are installed and they will run at the maximum transfer rate of DDR3 1066 MHz.
**Due to Intel® chipset limitation, DDR3 1600 MHz and higher memory modules on XMP mode will run at the maximum transfer rate of DDR3 1600 MHz.
***Hyper DIMM support is subject to the physical characteristics of individual CPUs. Please refer to Memory QVL for details.
****To prevent system instability, either install DDR3L DIMMs or DDR3 DIMMs with voltage lower than 1.5V.
*****Refer to www.asus.com for the latest Memory QVL (Qualified Vendors List).
Integrated graphics processor
Multi-VGA output support: HDMI/DVI-I ports
-Supports HDMI with max. resolution of 4096x2160@24Hz / 2560x1600@60Hz
-Supports DVI-I with max. resolution of 2560x1080 / 1920x1200
@60Hz
Support up to two displays simultaneously
Maximum shared memory of 1024 MB
1 x PCI Express 3.0/2.0 x16 slot
1 x PCI Express 2.0 x1 slot
2 x PCI slots
Intel® H110 Express Chipset:
- 4 x Serial ATA 6.0 Gb/s connectors
(continued on the next page)
vi
H110M2 D3 specifications summary
LAN
Audio
USB
ASUS unique features
Realtek® RTL8111F Gigabit LAN Controller
Realtek® ALC887 8-channel High Definition Audio CODEC
- Supports jack-detection and front panel jack-retasking
6 x USB 2.0 ports (2 ports at midboard, 4 ports at back panel) 4 x USB 3.0 ports (2 ports at midboard, 2 ports at back panel)
Dependable stability:
ASUS 5X PROTECTION II:
-ASUS LANGuard - Surge-protected networking
-ASUS Overvoltage Protection - World-class circuit-protecting power design
-ASUS DRAM Overcurrent Protection - Enhanced DRAM overcurrent protection
-ASUS Stainless Steel Back I/O - 3X more durable
-ESD Guards - Electrostatic discharge protection
Superb performance:
UEFI BIOS:
- Most advanced options with fast response time
EZ PC DIY:
Safe motherboard mounting
-Component-free areas to minimize damage risk
Q-Design
-ASUS Q-DIMM
-ASUS Q-Slot
UEFI BIOS EZ Mode - featuring friendly graphics user interface
-ASUS CrashFree BIOS 3
-ASUS EZ Flash 3
Optimized Cooling
- ASUS Fan Xpert
One Stop Control
AI Suite 3
Push Notice
- Monitor your PC status with smart devices in real time
Mobo Connect
Media Streamer
-Pipe music or movies from your PC to a smart TV
-Media Streamer app for portable smartphone/tablet, supporting iOS7 and Android 4.0 system
Ai Charger
(continued on the next page)
vii
H110M2 D3 specifications summary
Rear panel I/O ports
Internal connectors/ switches/ buttons
BIOS features
Manageability
Support DVD
Operating systems
Form factor
1 x PS/2 keyboard port (purple)
1 x PS/2 mouse port (green)
1 x DVI-I port
1 x HDMI port
1 x LAN (RJ-45) port
4 x USB 2.0/1.1 ports
2 x USB 3.0/2.0 ports
3 x 8-channel audio jacks
*Use a chassis with HD audio module in the front panel to support an 8-channel audio output.
1 x USB 3.0/2.0 connector supports additional 2 USB 3.0 ports 1 x USB 2.0/1.1 connector supports additional 2 USB 2.0 ports 4 x SATA 6.0 Gb/s connectors
1 x CPU fan connector
1 x Chassis fan connector
1 x Front panel audio connector (AAFP)
1 x System panel connector
1 x Speaker connector
1 x LPT connector
1 x COM connector
1 x 14-1 pin TPM connector
1 x MONO-out header
1 x Chassis intrusion header
1 x Clear CMOS header
1 x 24-pin ATX power connector
1 x 4-pin ATX 12V power connector
128 Mb Flash ROM, UEFI AMI BIOS, PnP, DMI3.0, WfM2.0, SM BIOS 3.0, ACPI 5.1, Multi-language BIOS, ASUS EZ Flash 3, CrashFree BIOS 3, F3 My
Favorites, Quick Note, Last Modified log, F12 PrintScreen, and ASUS DRAM
SPD (Serial Presence Detect) memory information, F6 Qfan Control
WfM 2.0, DMI 3.0, WOL by PME, WOR by PME, PXE
Drivers
ASUS utilities
ASUS Update
Anti-virus software (OEM version)
Windows® 10 (64-bit)
Windows® 8.1 (64-bit)
Windows® 7 (64-bit/32-bit)
*Please refer to chapter 1.9 or ASUS official website to download Windows® 7 installation Guide and EZ Installer to install Windows® 7.
MicroATX form factor: 9.6”x 8.2” (24.4cm x 20.8cm)
Specifications are subject to change without notice.
viii
Product introduction |
1 |
Take note of the following precautions before you install motherboard components or change any motherboard settings.
• Unplug the power cord from the wall socket before touching any component.
•Before handling components, use a grounded wrist strap or touch a safely grounded object or a metal object, such as the power supply case, to avoid damaging them due to static electricity.
•Before you install or remove any component, ensure that the ATX power supply is switched off or the power cord is detached from the power supply. Failure to do so may cause severe damage to the motherboard, peripherals, or components.
Before you install the motherboard, study the configuration of your chassis to ensure that the motherboard fits.
Unplug the power cord before installing or removing the motherboard. Failure to do so can cause you physical injury and damage to motherboard components.
1.2.1Placement direction
When installing the motherboard, place it into the chassis in the correct orientation. The edge with external ports goes to the rear part of the chassis as indicated in the image.
1.2.2Screw holes
Place six screws into the holes indicated by circles to secure the motherboard to the chassis.
Do not overtighten the screws! Doing so can damage the motherboard.
ASUS H110M2 D3 |
1-1 |
Place this side towards the rear
of the chassis
H110M2 D3
1.2.3Motherboard layout
KBMS
HDMI
ASM 1442K
I-DVI
USB5-8
LAN_USB3_34
AUDIO
RTL 8111F
17
Super
I/O
ALC
887VD2
AAFP
16 15
1 |
2 |
3 |
4 |
|
|
|
5 |
|
|
|
|
|
|
|
20.8cm(8.2in) |
|
|
|
|
|
|
|
|
|
|
|
CPU_FAN |
|
|
|
|
|
|
|
|
|
|
|
|
PCP |
|
|
|
|
|
|
|
|
|
|
|
01203 |
|
|
|
|
|
|
|
ATX12V |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
240-pin module) |
240-pin module) |
240-pin module) |
240-pin module) |
EATXPWR |
|
|
|
|
|
LGA1151 |
|
(64bit,A1 |
(64bit,A2 |
(64bit,B1 |
(64bit,B2 |
|
1 |
|
|
|
|
|
|
|
|
|
|
|
|
|
LANGuard |
|
CHA_FAN |
|
|
DDR3 DIMM |
DDR3 DIMM |
DDR3 DIMM |
DDR3 DIMM |
|
24.4cm(9.6in) |
|
|
|
BATTERY |
|
|
|
|
|
|
|
6 |
|
|
COM1 |
H110M2 D3 |
|
|
|
|
|
|
|
||
|
|
J1 |
|
|
|
|
USB3_12 |
|
|
||
|
|
|
PCIEX16 |
|
|
|
|
|
|
|
|
|
PCIEX1_1 |
ASM |
|
|
|
|
|
|
|
|
|
|
1083 |
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Intel® |
|
|
|
|
7 |
|
|
|
PCI1 |
|
H110 |
|
|
|
|
|||
|
|
|
|
|
|
|
|
||||
|
|
|
|
|
|
|
|
SATA6G_1 |
SATA6G_2 |
|
|
|
|
PCI2 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
128Mb |
|
|
CHASSIS |
|
|
|
|
|
|
|
|
BIOS |
|
|
|
|
TPM |
|
SPEAKER F_PANEL SATA6G_3 SATA6G_4 |
|
|
|||||
|
|
LPT |
USB910 |
|
|
||||||
|
|
|
|
|
CLRTC |
|
|
|
|
||
MONO_OUT |
|
|
|
|
|
|
|
|
|
|
|
14 |
|
13 |
12 |
11 |
10 |
9 |
8 |
|
7 |
|
|
1-2 |
Chapter 1: Product introduction |
1.2.4Layout contents
Connectors/Jumpers/Slots/LED |
Page |
|
1. |
ATX power connectors (24-pin EATXPWR, 4-pin ATX12V) |
1-15 |
2. |
Serial port connector (10-1 pin COM1) |
1-18 |
3. |
CPU and chassis fan connectors (4-pin CPU_FAN, 4-pin CHA_FAN) |
1-17 |
4. |
Intel® LGA1151 CPU socket |
1-3 |
5. |
DDR3 DIMM slots |
1-7 |
6. |
USB 3.0 connector (20-1 pin USB3_12) |
1-19 |
7. |
Intel® H110 Serial ATA 6.0Gb/s connectors (7-pin SATA6G_1~4) |
1-18 |
8. |
Clear RTC RAM (2-pin CLRTC) |
1-11 |
9. |
System panel connector (10-1 pin F_PANEL) |
1-20 |
10. |
Speaker connector (4-pin SPEAKER) |
1-17 |
11. |
USB 2.0 connector (10-1 pin USB910) |
1-19 |
12. |
TPM connector (14-1 pin TPM) |
1-16 |
13. |
LPT connector (26-1 pin LPT) |
1-15 |
14. |
Mono out header (2-pin MONO_OUT) |
1-20 |
15. |
Front panel audio connector (10-1 pin AAFP) |
1-16 |
16. |
Chassis intrusion header (4-1 pin CHASSIS) |
1-12 |
17. |
COM1 Ring/+5/+12V selector (6-pin J1) |
1-12 |
This motherboard comes with a surface mount LGA1151 socket designed for the 6th
Generation Intel® Core™ i7 / Core™ i5 / Core™ i3, Pentium® and Celeron® processors.
H110M2 D3
H110M2 D3 CPU socket LGA1150
ASUS H110M2 D3 |
1-3 |
Unplug all power cables before installing the CPU.
•Ensure that you install the correct CPU designed for the LGA1151 socket only. DO
NOT install a CPU designed for LGA1150, LGA1155 and LGA1156 sockets on the
LGA1151 socket.
•Upon purchase of the motherboard, ensure that the PnP cap is on the socket and the socket contacts are not bent. Contact your retailer immediately if the PnP cap is missing, or if you see any damage to the PnP cap/socket contacts/motherboard components.
•Keep the cap after installing the motherboard. ASUS will process Return Merchandise Authorization (RMA) requests only if the motherboard comes with the cap on the LGA1151 socket.
•The product warranty does not cover damage to the socket contacts resulting from incorrect CPU installation/removal, or misplacement/loss/incorrect removal of the PnP cap.
1.3.1Installing the CPU
1
A
B
2 |
3 |
1-4 |
Chapter 1: Product introduction |
4 |
C |
5 |
|
A |
|
1.3.2CPU heatsink and fan assembly installation
Apply the Thermal Interface Material to the CPU heatsink and CPU before you install the heatsink and fan if necessary.
ASUS H110M2 D3 |
1-5 |
To install the CPU heatsink and fan assembly
1 A 2
B
B
A
3 |
4 |
To uninstall the CPU heatsink and fan assembly
1 |
2 |
A
B B
A
1-6 |
Chapter 1: Product introduction |
1.4.1Overview
This motherboard comes with four Double Data Rate 3 (DDR3) Dual Inline Memory Module (DIMM) sockets. The figure illustrates the location of the DDR3 DIMM sockets:
DIMM A1 |
DIMM A2 |
DIMM B1 |
DIMM B2 |
H110M2 D3 |
|
|
|
Channel Sockets
Channel A DIMM_A1 & DIMM_A2
Channel B DIMM_B1 & DIMM_B2
H110M2 D3 240-pin DDR3 DIMM sockets
1.4.2Memory configurations
You may install 2 GB, 4 GB, 8 GB, and 16 GB unbuffered non-ECC DDR3 DIMMs into the DIMM sockets. You can refer to the recommended memory population below.
To prevent system instability, either install DDR3L DIMMs or DDR3 DIMMs with voltage lower than 1.5V.
Recommended memory configurations
ASUS H110M2 D3 |
1-7 |
•You may install varying memory sizes in Channel A and Channel B. The system maps the total size of the lower-sized channel for the dual-channel configuration. Any excess memory from the higher-sized channel is then mapped for single-channel operation.
•Due to Intel® chipset limitation, this motherboard can only support single-side memories when four modules are installed and they will run at the maximum transfer rate of DDR3 1066 MHz.
•Due to Intel® chipset limitation, DDR3 1600 MHz and higher memory modules on XMP mode will run at the maximum transfer rate of DDR3 1600 MHz.
•Due to the memory address limitation on 32-bit Windows® OS, when you install 4GB or more memory on the motherboard, the actual usable memory for the OS can be about 3GB or less. For effective use of memory, we recommend that you do any of the following:
-Use a maximum of 3 GB system memory if you are using a 32-bit Windows® OS.
-Install a 64-bit Windows® OS if you want to install 4GB or more on the motherboard.
-For more details, refer to the Microsoft® support site at http://support.microsoft. com/kb/929605/en-us.
•The default memory operation frequency is dependent on its Serial Presence Detect (SPD), which is the standard way of accessing information from a memory module. Under the default state, some memory modules for overclocking may operate at a lower frequency than the vendor-marked value. To operate at the vendor-marked or at a higher frequency, refer to section 2.5 Ai Tweaker menu for manual memory frequency adjustment.
•Always install the DIMMs with the same CAS Latency. For an optimum compatibility, we recommend that you install memory modules of the same version or data code (D/C) from the same vendor. Check with the vendor to get the correct memory modules.
Visit the ASUS website at www.asus.com for the latest QVL.
1-8 |
Chapter 1: Product introduction |
1.4.3Installing a DIMM
1
2
3
1.4.4Removing a DIMM
B
A
ASUS H110M2 D3 |
1-9 |
In the future, you may need to install expansion cards. The following sub sections describe the slots and the expansion cards that they support.
Unplug the power cord before adding or removing expansion cards. Failure to do so may cause you physical injury and damage motherboard components.
1.5.1Installing an expansion card
To install an expansion card:
1.Before installing the expansion card, read the documentation that came with it and make the necessary hardware settings for the card.
2.Remove the system unit cover (if your motherboard is already installed in a chassis).
3.Remove the bracket opposite the slot that you intend to use. Keep the screw for later use.
4.Align the card connector with the slot and press firmly until the card is completely seated on the slot.
5.Secure the card to the chassis with the screw you removed earlier.
6.Replace the system cover.
1.5.2Configuring an expansion card
After installing the expansion card, configure it by adjusting the software settings.
1.Turn on the system and change the necessary BIOS settings, if any. See Chapter 2 for information on BIOS setup.
2.Assign an IRQ to the card.
3.Install the software drivers for the expansion card.
When using PCI cards on shared slots, ensure that the drivers support “Share IRQ” or that the cards do not need IRQ assignments. Otherwise, conflicts will arise between the two PCI groups, making the system unstable and the card inoperable.
1.5.3PCI slot
The PCI slot supports LAN cards, SCSI cards, USB cards, and other card that comply with PCI specifications.
1.5.4PCI Express 2.0 x1 slot
This motherboard supports PCI Express x1 network cards, SCSI cards, and other cards that comply with the PCI Express specifications.
1.5.5PCI Express 3.0/2.0 x16 slot
This motherboard supports PCI Express x16 network cards, SCSI cards, and other cards that comply with the PCI Express specifications.
1-10 |
Chapter 1: Product introduction |