Asrock Z370 EXTREME4 Manual

Version 1.1

Published November 2017

Copyright©2017 ASRock INC. All rights reserved.

Copyright Notice:

No part of this documentation may be reproduced, transcribed, transmitted, or
translated in any language, in any form or by any means, except duplication of
documentation by the purchaser for backup purpose, without written consent of
ASRock Inc.

Products and corporate names appearing in this documentation may or may not
be registered trademarks or copyrights of their respective companies, and are used
only for identication or explanation and to the owners’ benet, without intent to

infringe.

Disclaimer:

Specications and information contained in this documentation are furnished for
informational use only and subject to change without notice, and should not be
constructed as a commitment by ASRock. ASRock assumes no responsibility for
any errors or omissions that may appear in this documentation.

With respect to the contents of this documentation, ASRock does not provide
warranty of any kind, either expressed or implied, including but not limited to
the implied warranties or conditions of merchantability or tness for a particular
purpose.

In no event shall ASRock, its directors, ocers, employees, or agents be liable for
any indirect, special, incidental, or consequential damages (including damages for
loss of prots, loss of business, loss of data, interruption of business and the like),
even if ASRock has been advised of the possibility of such damages arising from any
defect or error in the documentation or product.

is device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that

may cause undesired operation.

CALIFORNIA, USA ONLY

e Lithium battery adopted on this motherboard contains Perchlorate, a toxic substance
controlled in Perchlorate Best Management Practices (BMP) regulations passed by the
California Legislature. When you discard the Lithium battery in California, USA, please
follow the related regulations in advance.
“Perchlorate Material-special handling may apply, see ww w.dtsc.ca.gov/hazardouswaste/
perchlorate”

ASRock Website: http://www.asrock.com

AUSTRALIA ONLY

Our goods come with guarantees that cannot be excluded under the Australian
Consumer Law. You are entitled to a replacement or refund for a major failure and
compensation for any other reasonably foreseeable loss or damage caused by our
goods. You are also entitled to have the goods repaired or replaced if the goods fail
to be of acceptable quality and the failure does not amount to a major failure. If
you require assistance please call ASRock Tel : [phone] ext.123 (Standard
International call charges apply)

e terms HDMI™ and HDMI High-Denition Multimedia Interface, and the HDMI
logo are trademarks or registered trademarks of HDMI Licensing LLC in the United
States and other countries.

Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380; 6,487,535;

7,003,467 & other U.S. and worldwide patents issued & pending. DTS, the Symbol, &

DTS and the Symbol together is a registered trademark & DTS Connect, DTS Interactive,

DTS Neo:PC are trademarks of DTS, Inc. Product includes soware.

© DTS, Inc., All Rights Reserved.

Contents

Chapter 1 Introduction 1

1.1 Package Contents 1

1.2 Specications 2

1.3 Motherboard Layout 8

1.4 I/O Panel 10

Chapter 2 Installation 12

2.1 Installing the CPU 13

2.2 Installing the CPU Fan and Heatsink 16

2.3 Installing Memory Modules (DIMM) 17

2.4 Expansion Slots (PCI Express Slots) 19

2.5 Jumpers Setup 20

2.6 Onboard Headers and Connectors 21

2.7 SLITM and Quad SLITM Operation Guide 26

2.7.1 Installing Two SLITM-Ready Graphics Cards 26

2.7.2 Driver Installation and Setup 28

2.8 CrossFireXTM , 3-Way CrossFireXTM and Quad CrossFireXTM
Operation Guide 29

2.8.1 Installing Two CrossFireXTM-Ready Graphics Cards 29

2.8.2 Installing Three CrossFireXTM-Ready Graphics Cards 31

2.8.3 Driver Installation and Setup 32

2.9 M.2 WiFi/BT Module Installation Guide (M2_3) 33

2.10 M.2_SSD (NGFF) Module Installation Guide (M2_1 and M2_2) 35

Chapter 3 Software and Utilities Operation 39

3.1 Installing Drivers 39

3.2 A-Tuning 40

3.2.1 Installing A-Tuning 40

3.2.2 Using A-Tuning 40

3.3 ASRock Live Update & APP Shop 43

3.3.1 UI Overview 43

3.3.2 Apps 44

3.3.3 BIOS & Drivers 47

3.3.4 Setting 48

3.4 ASRock RGB LED 49

Chapter 4 UEFI SETUP UTILITY 51

4.1 Introduction 51

4.2 EZ Mode 52

4.3 Advanced Mode 53

4.3.1 UEFI Menu Bar 53

4.3.2 Navigation Keys 54

4.4 Main Screen 55

4.5 OC Tweaker Screen 56

4.6 Advanced Screen 67

4.6.1 CPU Conguration 68

4.6.2 Chipset Conguration 70

4.6.3 Storage Conguration 73

4.6.4 Intel® Thunderbolt 75

4.6.5 Super IO Conguration 76

4.6.6 ACPI Conguration 77

4.6.7 USB Conguration 79

4.6.8 Trusted Computing 80

4.7 Tools 81

4.8 Hardware Health Event Monitoring Screen 84

4.9 Security Screen 87

4.10 Boot Screen 88

4.11 Exit Screen 91

Z370 Extreme4

Chapter 1 Introduction

ank you for purchasing ASRock Z370 Extreme4 motherboard, a reliable

motherboard produced under ASRock’s consistently stringent quality control.

It delivers excellent performance with robust design conforming to ASRock’s

commitment to quality and endurance.

In this documentation, Chapter 1 and 2 contains the introduction of the

motherboard and step-by-step installation guides. Chapter 3 contains the operation

guide of the soware and utilities. Chapter 4 contains the conguration guide of

the BIOS setup.

Becau se the motherboard specications and the BIOS soware might be updated, the
content of this documentation will be subject to change without notice. In case any modi­cations of this documentation occur, the updated version will be available on ASRock’s
website w ithout further notice. If you require technical support related to this mother­board, please visit our website for specic information about the model you are using. You
may nd the l atest VGA cards and CPU suppor t list on ASRock’s website a s well. ASRock
website http://www.asrock.com.

1.1 Package Contents

ASRock Z370 Extreme4 Motherboard (ATX Form Factor)

•

ASRock Z370 Extreme4 Quick Installation Guide

•

ASRock Z370 Extreme4 Support CD

•

1 x I/O Panel Shield

•

4 x Serial ATA (SATA) Data Cables (Optional)

•

1 x ASRock SLI_HB_Bridge_2S Card (Optional)

•

3 x Screws for M.2 Socket (Optional)

•

English

1

1.2 Specications

Platform

CPU

Chipset

Memory

•

•

•

•

•

•

•

•

•

•

•

* Please refer to Memory Support List on ASRock's website for

more information. (http://www.asrock.com/)

* 8th Gen Intel® CPU supports DDR4 up to 2666.

•

•

•

•

ATX Form Factor

Supports 8th Generation Intel® CoreTM Processors (Socket

1151)

Digi Power design

12 Power Phase design

Supports Intel® Turbo Boost 2.0 Technology

Supports Intel® K-Series unlocked CPUs

Supports ASRock BCLK Full-range Overclocking

Intel® Z370

Dual Channel DDR4 Memory Technology

4 x DDR4 DIMM Slots

Supports DDR4 4333+(OC)*/4000(OC)/3866(OC)/

3800(OC)/3733(OC)/3600(OC)/3200(OC)/2933(OC)/2800

(OC)/2666/2400/2133 non-ECC, un-buered memory

Supports ECC UDIMM memory modules (operate in non-

ECC mode)

Max. capacity of system memory: 64GB

Supports Intel® Extreme Memory Prole (XMP) 2.0

15μ Gold Contact in DIMM Slots

English

2

Expansion
Slot

3 x PCI Express 3.0 x16 Slots (PCIE2/PCIE4/PCIE6: single

•

at x16 (PCIE2); dual at x8 (PCIE2) / x8 (PCIE4); triple at x8

(PCIE2) / x8 (PCIE4) / x4 (PCIE6))*

* Supports NVMe SSD as boot disks

3 x PCI Express 3.0 x1 Slots (Flexible PCIe)

•

Supports AMD Quad CrossFireXTM, 3-Way CrossFireXTM

•

and CrossFireXTM

Supports NVIDIA® Quad SLITM and SLI

•

1 x M.2 Socket (Key E), supports ty pe 2230 WiFi/BT module

•

15μ Gold Contact in VGA PCIe Slot (PCIE2)

•

TM

Graphics

Z370 Extreme4

Intel® UHD Graphics Built-in Visuals and the VGA outputs

•

can be supported only with processors which are GPU

integrated.

Supports Intel® UHD Graphics Built-in Visuals : Intel®

•

Quick Sync Video with AVC, MVC (S3D) and MPEG-2 Full

HW Encode1, Intel® InTruTM 3D, Intel® Clear Video HD

Technology, Intel® InsiderTM, Intel® UHD Graphics

DirectX 12

•

HWAEncode/Decode: VP9 8-bit, VP9 10-bit (Encode only),

•

VP8, HEVC (MPEG-H Part2, h.265), AVC (MPEG4, h.264),

MPEG2-Part2 (h.262), JPEG/MJPEG,VC-1

Max. shared memory 1024MB

•

* e size of ma ximum shared memory may vary from dierent

operating systems.

ree graphics output options: D-Sub, DVI-D and HDMI

•

Supports Triple Monitor

•

Supports HDMI with max. resolution up to 4K x 2K

•

(4096x2160) @ 30Hz

Supports DVI-D with ma x. resolution up to 1920x1200 @

•

60Hz

Supports D-Sub with max. resolution up to 1920x1200 @

•

60Hz

Supports Auto Lip Sync, Deep Color (12bpc), xvYCC and

•

HBR (High Bit Rate Audio) with HDMI Port (Compliant

HDMI monitor is required)

Supports HDCP with DVI-D and HDMI Ports

•

Supports 4K Ultra HD (UHD) playback with HDMI Port

•

Audio

7.1 CH HD Audio with Content Protection (Realtek

•

ALC1220 Audio Codec)

Premium Blu-ray Audio support

•

Supports Surge Protection

•

Supports Purity SoundTM 4

•

- Nichicon Fine Gold Series Audio Caps

- 120dB SNR DAC with Dierential Amplier

- NE5532 Premium Headset Amplier for Front Panel

Audio Connector (Supports up to 600 Ohm headsets)

- Pure Power-In

English

3

LAN

Rear Panel
I/O

- Direct Drive Technology

- PCB Isolate Shielding

- Impedance Sensing on Front Out port

-

Individual PCB Layers for R/L Audio Channel

- RGB LED

- 15μ Gold Audio Connector

Supports DTS Connect

•

Gigabit LAN 10/100/10 00 Mb/s

•

Giga PHY Intel® I219V

•

Supports Wake-On-LAN

•

Supports Lightning/ESD Protection

•

Supports Energy Ecient Ethernet 802.3az

•

Supports PXE

•

2 x Antenna Ports

•

1 x PS/2 Mouse/Keyboard Port

•

1 x D-Sub Port

•

1 x DVI-D Port

•

1 x HDMI Port

•

1 x Optical SPDIF Out Port

•

1 x USB 3.1 Gen2 Type-A Port (10 Gb/s) (ASMedia ASM3142)

•

(Supports ESD Protection)

1 x USB 3.1 Gen2 Type-C Port (10 Gb/s) (ASMedia ASM3142)

•

(Supports ESD Protection)

4 x USB 3.1 Gen1 Ports (Intel® Z370) (Supports ESD

•

Protection)

1 x RJ-45 LAN Port with LED (ACT/LINK LED and SPEED

•

LED)

HD Audio Jacks: Rear Speaker / Centra l / Bass / Line in /

•

Front Speaker / Microphone

English

4

Storage

6 x SATA3 6.0 Gb/s Connectors, support RAID (RAID 0,

•

RAID 1, RAID 5, RAID 10, Intel Rapid Storage Technology

15), NCQ, AHCI and Hot Plug*

2 x SATA3 6.0 Gb/s Connectors by ASMedia ASM1061, sup-

•

port NCQ, AHCI and Hot Plug

* M2_1, SATA3_0 and SATA3_1 share lanes. If either one of

them is in use, the others will be disabled.

* M2_ 2, SATA3_4 and SATA3_5 share lanes. If either one of

them is in use, the others will be disabled.

Connector

Z370 Extreme4

1 x Ultra M.2 Socket (M2_1), supports M Key type

•

2230/2242/2260/2280 M.2 SATA3 6.0 Gb/s module and M.2

PCI Express module up to Gen3 x4 (32 Gb/s)**

1 x Ultra M.2 Socket (M2_2), supports M Key ty pe

•

2230/2242/2260/2280/22110 M.2 SATA3 6.0 Gb/s module

and M.2 PCI Express module up to Gen3 x4 (32 Gb/s)**

** Supports Intel® OptaneTM Tech nolo gy

** Supports NVMe SSD as boot disks

** Supports ASRock U.2 Kit

1 x COM Port Header

•

1 x TPM Header

•

1 x Power LED and Speaker Header

•

1 x RGB LED Header

•

* Supports in total up to 12V/3A, 36W LED Strip

1 x CPU Fan Connector (4-pin)

•

* e CPU Fan Connector supports the CPU fan of ma ximum

1A (12W) fan power.

1 x CPU Optional/Water Pump Fan Connector (4-pin)

•

* e CPU Optional/Water Pump Fan supports the water cooler

fan of maximum 1.5A (18W) fan power.

2 x Chassis Fan Connectors (4-pin) (Smart Fan Speed

•

Control)

1 x Chassis Optional/Water Pump Fan Connector (4-pin)

•

* e Chassis Optiona l/Water Pump Fan supports the water

cooler fan of maximum 1.5A (18W) fan power.

* CHA_FAN1 and CHA _FAN2 can auto detect if 3-pin or 4-pin

fan is in use.

1 x 24 pin ATX Power Connector (Hi-Density Power

•

Connec tor)

1 x 8 pin 12V Power Connector (Hi-Density Power

•

Connec tor)

1 x Front Panel Audio Connector (15μ Gold Audio

•

Connec tor)

1 x underbolt AIC Connector (5-pin)

•

3 x USB 2.0 Headers (Support 6 USB 2.0 ports) (Intel® Z370)

•

(Supports ESD Protection)

1 x USB 3.1 Gen1 Header (Supports 2 USB 3.1 Gen1 ports)

•

(Intel® Z370) (Supports ESD Protection)

English

5

BIOS
Feature

Hardware
Monitor

1 x USB 3.1 Gen1 Header (Supports 2 USB 3.1 Gen1 ports)

•

(ASMedia ASM1074 hub) (Supports ESD Protection)

1 x Front Panel Type C USB 3.1 Gen1 Header (ASMedia

•

ASM1074 hub)

2 x AMI UEFI Legal BIOS with multilingual GUI support

•

(1 x Main BIOS and 1 x Backup BIOS)

Supports Secure Backup UEFI Technology

•

ACPI 6.0 Compliant wake up events

•

SMBIOS 2.7 Support

•

CPU Core/Cache, GT Core/Cache, DRAM, PCH 1.0V,

•

VCCIO, VCCST, VCCSA, VCCPLL, CPU Internal PLL, GT

PLL, Ring PLL, System Agent PLL, Memory Controller PLL

Voltage Multi-adjustment

Temperature Sensing: CPU, CPU Optional/Water Pump,

•

Chassis, Chassis Optional/Water Pump Fans

Fan Tachometer: CPU, CPU Optional/Water Pump, Chassis,

•

Chassis Optional/Water Pump Fans

Quiet Fan (Auto adjust chassis fan speed by CPU tempera-

•

ture): CPU, CPU Optional/Water Pump, Chassis, Chassis

Optional/Water Pump Fans

Fan Multi-Speed Control: CPU, CPU Optional/Water Pump,

•

Chassis, Chassis Optional/Water Pump Fans

Voltage monitoring: +12V, +5V, +3.3V, CPU Vcore, DRAM,

•

VPPM, PCH 1.0V, VCCSA, VCCST

English

6

Microso® Windows® 10 64-bit

OS

Certica­tions

* For detailed product information, please visit our website: http://www.asrock .com

•

FCC, CE

•

ErP/EuP ready (ErP/EuP ready power supply is required)

•

Z370 Extreme4

Please realiz e that the re is a certain r isk involved with o verclocking, including adjusting
the setting in the BIOS, applying Untied Overclocking Technolog y, or using third-party
overclocking to ols. O verclocking may aect your system’s stability, or even c ause damage to
the components and devices of your system. It should be don e at your ow n risk and expense.
We are not responsibl e for possible damage caused by overclo cking.

English

7

Intel

Z370

DDR 4_A2 (6 4 bit, 28 8-pin mo dule)

DDR 4_A1 (6 4 bit, 28 8-pin mo dule)

DDR 4_B2 (6 4 bit, 28 8-pin mo dule)

DDR 4_B1 (6 4 bit, 28 8-pin mo dule)

ATX12V1

ATXP WR 1

LAN

PCIE2

Top:
RJ-45

USB 3.1 Gen1
T: USB3
B: USB4

Top:

Central/Bass

Center :

REAR SPK

Top:

LINE IN

Center :

FRONT

Bottom :

Optica l

SPDIF

Bottom :

MIC IN

PCIE4

HDLED RESET

PLED PWRBTN

PANEL1

1

1

SPK_PLED1

COM1

1

1

HD_AUDIO1

PCIE6

SATA3_2_3

SATA3_0_1

SATA3_A1_ A2

PCIE1

RoHS

6

8

9

10

11

12

13

USB_1_2

1

19

USB_3_4

1

20

USB_5_6

1

18 1726

27

HDMI1

SATA3_4_5

1

5

4

25

14

BIOS_A1

BIOS_B1

BIOS_B_LED1

BIOS

BIOS

BIOS_A_LED1

USB 3.1 Ge n1

T: USB1

B: USB2

PS2

Keybo ard

/Mous e

CMOS

Battery

PCIE3

M2_1

M2_2

CT2

CT2

CT3

CT3

CT4

CT4CT5

T B1

1

23

2

USB3_7 _8

1

1516

CPU_FAN1

7

21

1

TPMS1

PCIE5

USB 3.1 Gen2
T: USB31_TA_1
B: USB31_TC_1

CT1

CT1

CHA_FAN1

Ultra M.2

PCIe Gen3x4

CHA_FAN2

CPU_OPT/
W_PUMP

CHA_FAN3/W_PUMP

3

USB3_5 _6

1

RGB_LED

1

24

CLRMOS1

1

22

Ult ra M.2

PCIe G en3 x4

USB3_TC_1

Purity

Sound 4

TM

1.3 Motherboard Layout

English

8

No. Description

1 ATX 12V Power Connector (ATX12V1)

2 CPU Fan Connector (CPU_FAN1)

3 CPU Fan / Waterpump Fan Connector (CPU_OPT/W_PUMP)

4 2 x 288-pin DDR4 DIMM Slots (DDR4_A1, DDR4_B1)

5 2 x 288-pin DDR4 DIMM Slots (DDR4_A2, DDR4_B2)

6 ATX Power Connector (ATXPWR1)

7 USB 3.1 Gen1 Header (USB3_5_6)

8 USB 3.1 Gen1 Header (USB3_7_8)

9 Front Panel Type C USB 3.1 Gen1 Header (USB3_TC_1)

10 SATA3 Connectors (SATA3_4_5)

11 SATA3 Connectors (SATA3_2_3)

12 SATA3 Connectors (SATA3_0_1)

13 SATA3 Connectors (SATA3_A1_A2)

14 System Panel Header (PANEL1)

15 Power LED and Speaker Header (SPK_PLED1)

16 Chassis Fan / Waterpump Fan Connector (CHA_FAN3/W_PUMP)

17 COM Port Header (COM1)

18 USB 2.0 Header (USB_ 5_6)

19 USB 2.0 Header (USB_1_2)

20 USB 2.0 Header (USB_3_4)

21 TPM Header (TPMS1)

22 Chassis Fan Connector (CHA_FAN2)

23 underbolt AIC Connector (TB1)

24 RGB LED Header (RGB_LED)

25 Clear CMOS Jumper (CLRMOS1)

26 Front Panel Audio Header (HD_AUDIO1)

27 Chassis Fan Connector (CHA_FAN1)

Z370 Extreme4

English

9

1.4 I/O Panel

6

1

2 547

3

15 10131416

12

No. Description No. Description

1 PS/2 Mouse/Keyboard Port (PS2_KB1) 9 Optical SPDIF Out Port

2 D-Sub Port 10 USB 3.1 Gen1 Ports (USB3_34)

3 LAN RJ-45 Port* 11 USB 3.1 Gen2 Type-A Port (USB31_TA_1)

4 Central / Bass (Orange) 12 USB 3.1 Gen2 Type-C Port (USB31_TC_1)

5 Rear Speaker (Black) 13 HDMI Port

6 Line In (Light Blue) 14 DVI-D Port

7 Front Speaker (Lime)** 15 USB 3.1 Gen1 Port (USB3_12)

8 Microphone (Pink) 16 Antenna Ports

8911

English

10

Z370 Extreme4

* ere are two LEDs on each LAN port. Please refer to the table below for the LAN port LED indications.

ACT/LINK LED

SPEED LED

LAN Por t

Activity / Link LED Speed LED

Status Description Status Description

O No Link O 10Mbps connection
Blinking Data Activity Orange 100Mbps connection
On Link Green 1Gbps connection

** If you use a 2- channel speaker, plea se connect the speake r’s plug into “Front Speaker Jack”. See the table below

for connection d etails in accordance w ith the type of speaker you use.

Audio Output

Channels

Front Speaker

(No. 7)

Rear Speaker

(No. 5)

Central / Bass

(No. 4)

2 V -- -- --
4 V V -- --
6 V V V --
8 V V V V

To enable Multi-Streaming, you need to connect a front panel audio cable to the front
panel au dio header. Aer re starting your computer, you will nd the “Mixe r” tool on your
system. Plea se sele ct “Mixe r ToolBox” , click “Enable playback multi-streaming”, and
click “ok”. Choose “2CH”, “4CH”, “6CH”, or “8CH” and then you are a llowed to select
“Realtek HDA Primary output” to u se the Rear Speaker, Central/Ba ss, and Front Speaker,
or select “Realtek HDA Audio 2nd output” to use the front panel audio.

Line In

(No. 6)

English

11

Chapter 2 Installation

is is an ATX form factor motherboard. Before you install the motherboard, study

the conguration of your chassis to ensure that the motherboard ts into it.

Pre-installation Precautions

Take note of the following precautions before you install motherboard components

or change any motherboard settings.

Make sure to unplug the power cord before installing or removing the motherboard

•

components. Failure to do so may cause physical injuries and damages to motherboard

components.

In order to avoid damage from static electricity to the motherboard’s components,

•

NEVER place your motherboard directly on a carpet. Also remember to use a grounded

wrist strap or touch a safety grounded object before you handle the components.

Hold components by the edges and do not touch the ICs.

•

Whenever you uninstall any components, place them on a grounded anti-static pad or

•

in the bag that comes with the components.

When placing screws to secure the motherboard to the chassis, please do not over-

•

tighten the screws! Doing so may damage the motherboard.

English

12

2.1 Installing the CPU

1. Before you insert the 1151-Pin CPU into the socket, please check if the P nP cap is on the
socket, if the CPU surface is unclean, or if there are any bent pins in the sock et. Do not
force to in sert the CPU into the socket if above situation is found . Otherwise, the CPU
will be seriously damaged.

2. Unplug all power c ables before in stalling the CPU.

1

Z370 Extreme4

A

B

2

English

13

3

4

English

14

5

Please save and replace the cover if the processor i s removed. e cover must be placed if
you wish to return the motherboard for aer service.

Z370 Extreme4

15

English

2.2 Installing the CPU Fan and Heatsink

1 2

English

16

FAN

CPU_

Z370 Extreme4

2.3 Installing Memory Modules (DIMM)

is motherboard provides four 288-pin DDR4 (Double Data Rate 4) DIMM slots,

and supports Dual Channel Memory Technology.

1. For dual channel cong uration , you always need to in stall identical (the same b rand,

speed , size and chip-type) DDR4 DIMM pairs.

2. It is unable to activate Dual Channel Memor y Technology with only one or three memory
module installed.

3. It is not allowed to install a DDR, DDR2 or DDR3 memory module into a DDR4 sl ot;
otherwise , this motherboard and DIM M may be damaged.

Dual Channel Memory Conguration

Priority DDR4_A1 DDR4_A2 DDR4_B1 DDR4_B2

1 Populated Populated
2 Populated Populated Populated Populated

e DIMM only ts in one correct orie ntation. It will cause permanent dam age to the
motherboard and the DIMM if you force the DIMM into the slot at incorrect orientation.

17

English

1

2

English

18

3

2.4 Expansion Slots (PCI Express Slots)

ere are 6 PCI Express slots on the motherboard.

Before installing an ex pansion card, please make sure that the power supply is switched o
or the power cord is unplug ged. Pl ease re ad the documentation of the expansion card and
make necessary hardware settings for the card before you start the installation.

PCIe slots:

PCIE1 (PCIe 3.0 x1 slot) is used for PCI Express x1 lane width cards.

PCIE2 (PCIe 3.0 x16 slot) is used for PCI Express x16 lane width graphics cards.

PCIE3 (PCIe 3.0 x1 slot) is used for PCI Express x1 lane width cards.

PCIE4 (PCIe 3.0 x16 slot) is used for PCI Express x8 lane width graphics cards.

PCIE5 (PCIe 3.0 x1 slot) is used for PCI Express x1 lane width cards.

PCIE6 (PCIe 3.0 x16 slot) is used for PCI Express x4 lane width graphics cards.

PCIe Slot Congurations

PCIE2 PCIE4 PCIE6

Z370 Extreme4

Single Graphics Card x16 N/A N/A

Two Graphics Cards in

CrossFireXTM or SLITM

Mode

ree Graphics Cards in

3-Way CrossFireXTM Mode

For a better ther mal environme nt, ple ase connect a ch assis fan to the motherboard’s ch as­sis fan connector (CHA_ FAN1, CHA_FAN2 or CHA_ FAN3 ) when using multiple graphic s
cards.

x8 x8 N/A

x8 x8 x4

English

19

2.5 Jumpers Setup

e illustration shows how jumpers are setup. When the jumper cap is placed on

the pins, the jumper is “Short”. If no jumper cap is placed on the pins, the jumper is

“O pen”.

English

Clear CMOS Jumper

(CLRCMO S1)

(see p.8, No. 25)

CLRCMOS1 allows you to clear the data in CMOS. e data in CMOS includes

system setup information such as system password, date, time, and system setup

parameters. To clear and reset the system parameters to default setup, please

turn o the computer and unplug the power cord, then use a jumper cap to short

the pins on CLRCMOS1 for 3 seconds. Please remember to remove the jumper

cap aer clearing the CMOS. If you need to clear the CMOS when you just nish

updating the BIOS, you must boot up the system rst, and then shut it down

before you do the clear-CMOS action.

2-pin Jumper

Short: Clear CMOS

Open: Default

20

2.6 Onboard Headers and Connectors

1

Onboard headers and connectors are NOT jump ers. Do NOT place jumper caps over these
heade rs and connectors. Placing jumper caps over the headers and connectors will cause
permanent damage to the motherboard.

Z370 Extreme4

System Panel Header

(9-pi n PANEL1)

(see p.8, No. 14)

PWRBTN (Power Button):

Connec t to the power button on the ch assi s front panel. You may congure the way to tur n
o your system using the power button.

RESET (Reset B utton):
Connec t to the reset button on the ch assi s front panel. P ress the reset button to re start the
computer if the computer f reezes and fails to per form a normal restar t.

PLED (Syste m Power LED):
Connec t to the power status indicator on the chas sis front panel. e LED i s on when the
system is operating. e LED keeps blinking when the system is in S1/S3 sleep state. e
LED is o when the system is in S4 slee p state or powered o (S5).

HDLED (Ha rd Drive Activity LED):
Connec t to the hard drive ac tivity LED on the chassis front panel. e LED is on when the
hard drive is reading or wr iting data.

e front panel de sign may dier by chassis. A front panel module mainly consists of powe r
button, reset button , power LED, hard dr ive activity LED, speaker and etc. When connect­ing your ch assi s front panel module to thi s header, make sure the wire a ssignments and the
pin assignments are matched correctly.

PLED+

PLED-

HDLED-

HDLED+

PWRBTN#

GND

RESET#

GND

GND

Connect the power

button, reset button and

system status indicator on

the chassis to this header

according to the pin

assignments below. Note

the positive and negative

pins before connecting

the cables.

English

21

Power LED and Speaker

1

+5V

DUMMY

PLED+

PLED+

PLED-

DUMMY

SPEAKER

DUMMY

GND

GND

P+

P-

USB_PWR

P+

P-

USB_PWR

1

Header

(7-pin SPK_PLED1)

(see p.8, No. 15)

Please connect the

chassis power LED and

the chassis speaker to this

header.

English

Serial ATA3 Connectors

(SATA3_4_5:

see p.8, No. 10)

(SATA3_2_3:

see p.8, No. 11)

(SATA3_0_1:

see p.8, No. 12)

(SATA3_A1_A2:

see p.8, No. 13)

USB 2.0 Headers

(9-pin USB_1_2)

(see p.8, No. 19)

(9-pin USB_3_4)

(see p.8, No. 20)

(9-pin USB_5_6)

(see p.8, No. 18)

SATA3_2SATA3_0

SATA3_A1 SATA3_4

ese eight SATA3

connectors support SATA

data cables for internal

storage devices with up to

6.0 Gb/s data transfer rate.

* M2_1, SATA3_0 and

SATA3_3SATA3_1

SATA3_1 share lanes. If

either one of them is in

use, the others will be

disabled.

* M2_ 2, SATA3_4 and

SATA3_5 share lanes. If

either one of them is in

use, the others will be

SATA3_A2 SATA3_5

disabled.

*To minimize the boot

time, use Intel® Z370

SATA ports (SATA3_0)

for your bootable devices.

ere are three headers

on this motherboard.

Each USB 2.0 header can

support two ports.

22

Z370 Extreme4

1

J_SENSE

OUT2_L

1

MIC_RET

PRESENCE#

GND

OUT2_R

MIC2_R

MIC2_L

OUT_RET

USB 3.1 Gen1 Headers

(19-pin USB3_5_6)

(see p.8, No. 7)

(19-pin USB3_7_8)

(see p.8, No. 8)

Front Panel Type C USB

3.1 Gen1 Header

(26-pin USB3_TC_1)

(see p.8, No. 9)

Front Panel Audio Header

(9-pin HD_ AUDIO1)

(see p.8, No. 26)

Vbus

IntA_PA_SSRX-

IntA_PA_SSRX+

GND

IntA_PA_SSTX-

IntA_PA_SSTX+

GND

IntA_PA_D-

IntA_PA_D+

VbusVbus

IntA_PB_SSRX-

IntA_PB_SSRX+

GND

IntA_PB_SSTX-

IntA_PB_SSTX+

GND

IntA_PB_D-

IntA_PB_D+

Dummy

ere are two headers on

this motherboard. Each

USB 3.1 Gen1 header can

support two ports.

ere is one Front

Panel Type C USB 3.1

Gen1 Header on this

motherboard. is header

is used for connecting a

USB 3.1 Gen1 module for

additional USB 3.1 Gen1

ports.

is header is for

connecting audio devices

to the front audio panel.

1. High Denition Audio support s Jack Sensing, but the panel wire on the cha ssis must sup ­port HDA to function correctly. Ple ase fol low the instructions in our manual and chassis
manual to install your system.

2. If you use an AC’97 audio panel , please install it to th e front panel audio header by the
steps below:
A. Connect Mic_IN (MIC) to MIC2_ L.
B. Conne ct Audio_R (RIN) to OUT2_R and Audio_ L (LIN) to OUT2_ L.
C. Connect Ground (GND) to Ground (GND).
D. MIC_ RET and OUT_RET are for the HD audio panel only. You don’t ne ed to conn ect
them for the AC’97 audio panel .
E. To activate the front mic, go to the “FrontMic” Tab in the Realtek Control panel and
adjust “Recording Volume”.

English

23

Chassis Fan Connectors

GN

OL

FA

FAN_SPEED_CONTROL

1 2 3 4

D

F

4 3 2 1

GND

OL

(4-pin CHA_FAN1)

(see p.8, No. 27)

(4-pin CHA_FAN2)

(see p.8, No. 22)

AN_SPEED_CONTROL

CHA_FAN_SPEED

FAN_VOLTAGE

FAN_VOLTAGE

FAN_SPEED

FAN_SPEED_CONTR

1 2 3 4

Please connect fan cables

to the fan connectors and

match the black wire to

the ground pin.

GN

Chassis Optional/Water

Pump Fan Connector

(4-pin CHA_FAN3/W_

PUMP)

(see p.8, No. 16)

CPU Fan Connector

(4-pin CPU_FAN1)

(see p.8, No. 2)

CPU Optional/Water

Pump Fan Connector

(4-pin CPU_OPT/W_

PUM P)

(see p.8, No. 3)

D

FAN_VOLTAGE

FAN_SPEED

FAN_SPEED_CONTR

1 2 3 4

CPU_FAN_SPEED

FAN_VOLTAGE

GND

N_SPEED_CONTROL

CPU_FAN_SPEED

FAN_VOLTAGE

GND

is motherboard

provides a 4-Pin water

cooling

chassis

connectors. If you plan to

connect a 3-Pin

water cooler fan, please

connect it to Pin 1-3.

is motherboard

provides a 4-Pin CPU fan

(Quiet Fan) connector.

If you plan to connect a

3-Pin CPU fan, please

connect it to Pin 1-3.

is motherboard

4

provides a 4-Pin water

3

2

cooling CPU fan

1

connector. If you plan

to connect a 3-Pin CPU

water cooler fan, please

connect it to Pin 1-3.

fan

chassis

English

24

ATX Power Connector

(24-p i n ATX PWR1)

(see p.8, No. 6)

12

24

is motherboard pro-

vides a 24-pin ATX power

connector. To use a 20-pin

ATX power supply, please

plug it along Pin 1 and Pin

1

13

13.