Version 1.0
Published May 2019
Copyright©2019 ASRock INC. All rights reserved.
Copyright Notice:
No part of this documentation may be reproduced, transcribed, transmitted, or translated in any language, in any form or by any means, except duplication of documentation by the purchaser for backup purpose, without written consent of ASRock Inc.
Products and corporate names appearing in this documentation may or may not be registered trademarks or copyrights of their respective companies, and are used only for identification or explanation and to the owners’ benefit, without intent to
infringe.
Disclaimer:
Specifications and information contained in this documentation are furnished for informational use only and subject to change without notice, and should not be constructed as a commitment by ASRock. ASRock assumes no responsibility for any errors or omissions that may appear in this documentation.
With respect to the contents of this documentation, ASRock does not provide warranty of any kind, either expressed or implied, including but not limited to the implied warranties or conditions of merchantability or fitness for a particular purpose.
In no event shall ASRock, its directors, officers, employees, or agents be liable for any indirect, special, incidental, or consequential damages (including damages for loss of profits, loss of business, loss of data, interruption of business and the like), even if ASRock has been advised of the possibility of such damages arising from any defect or error in the documentation or product.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1)this device may not cause harmful interference, and
(2)this device must accept any interference received, including interference that may cause undesired operation.
CALIFORNIA, USA ONLY
The Lithium battery adopted on this motherboard contains Perchlorate, a toxic substance controlled in Perchlorate Best Management Practices (BMP) regulations passed by the California Legislature. When you discard the Lithium battery in California, USA, please follow the related regulations in advance.
“Perchlorate Material-special handling may apply, see www.dtsc.ca.gov/hazardouswaste/ perchlorate”
ASRock Website: http://www.asrock.com
AUSTRALIA ONLY
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage caused by our goods. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. If you require assistance please call ASRock Tel : +886-2-28965588 ext.123 (Standard International call charges apply)
The terms HDMI® and HDMI High-Definition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.
Contents
Chapter 1 Introduction |
1 |
|
1.1 |
Package Contents |
1 |
1.2 |
Specifications |
2 |
1.3 |
Motherboard Layout |
7 |
1.4 |
I/O Panel |
9 |
Chapter 2 Installation |
11 |
|
2.1 |
Installing the CPU |
12 |
2.2 |
Installing the CPU Fan and Heatsink |
14 |
2.3 |
Installing Memory Modules (DIMM) |
22 |
2.4 |
Expansion Slots (PCI Express Slots) |
25 |
2.5 |
Jumpers Setup |
26 |
2.6 |
Onboard Headers and Connectors |
27 |
2.7 |
Post Status Checker |
33 |
2.8 |
CrossFireXTM and Quad CrossFireXTM Operation Guide |
34 |
2.8.1 |
Installing Two CrossFireXTM-Ready Graphics Cards |
34 |
2.8.2 |
Driver Installation and Setup |
36 |
2.9 |
M.2_SSD (NGFF) Module Installation Guide (M2_1) |
37 |
2.10 |
M.2 WiFi/BT Module Installation Guide (M2_2) |
40 |
2.11 |
M.2_SSD (NGFF) Module Installation Guide (M2_3) |
42 |
Chapter 3 Software and Utilities Operation |
45 |
|
3.1 |
Installing Drivers |
45 |
3.2 |
A-Tuning |
46 |
3.3 |
ASRock Live Update & APP Shop |
49 |
3.3.1 |
UI Overview |
49 |
3.3.2 |
Apps |
50 |
3.3.3 |
BIOS & Drivers |
53 |
3.3.4 |
Setting |
54 |
3.4 |
ASRock Polychrome SYNC |
55 |
Chapter 4 UEFI SETUP UTILITY |
58 |
|
4.1 |
Introduction |
58 |
4.1.1 |
UEFI Menu Bar |
58 |
4.1.2 |
Navigation Keys |
59 |
4.2 |
Main Screen |
60 |
4.3 |
OC Tweaker Screen |
61 |
4.4 |
Advanced Screen |
65 |
4.4.1 |
CPU Configuration |
66 |
4.4.2 |
Onboard Devices Configuration |
67 |
4.4.3 |
Storage Configuration |
69 |
4.4.4 |
ACPI Configuration |
70 |
4.4.5 |
Super IO Configuration |
71 |
4.4.6 |
Trusted Computing |
72 |
4.4.7 |
AMD CBS |
73 |
4.4.8 |
AMD PBS |
74 |
4.4.9 |
AMD Overclocking |
75 |
4.5 |
Tools |
76 |
4.6 |
Hardware Health Event Monitoring Screen |
77 |
4.7 |
Security Screen |
80 |
4.8 |
Boot Screen |
81 |
4.9 |
Exit Screen |
83 |
X570 Pro4
Chapter 1 Introduction
Thank you for purchasing ASRock X570 Pro4 motherboard, a reliable motherboard produced under ASRock’s consistently stringent quality control. It delivers excellent performance with robust design conforming to ASRock’s commitment to quality and endurance.
In this documentation, Chapter 1 and 2 contains the introduction of the motherboard and step-by-step installation guides. Chapter 3 contains the operation guide of the software and utilities. Chapter 4 contains the configuration guide of the BIOS setup.
Because the motherboard specifications and the BIOS software might be updated, the content of this documentation will be subject to change without notice. In case any modifications of this documentation occur, the updated version will be available on ASRock’s website without further notice. If you require technical support related to this motherboard, please visit our website for specific information about the model you are using. You may find the latest VGA cards and CPU support list on ASRock’s website as well. ASRock website http://www.asrock.com.
•ASRock X570 Pro4 Motherboard (ATX Form Factor)
•ASRock X570 Pro4 Quick Installation Guide
•ASRock X570 Pro4 Support CD
•2 x Serial ATA (SATA) Data Cables (Optional)
•3 x Screws for M.2 Sockets (Optional)
•1 x Standoff for M.2 Socket (Optional)
•1 x I/O Panel Shield
English
1
English
Platform |
• |
ATX Form Factor |
|
• |
Solid Capacitor design |
|
• |
2oz Copper PCB |
CPU |
• |
Supports AMD AM4 socket RyzenTM 2000 and 3000 series |
|
|
processors |
|
• |
Digi Power design |
|
• 10 Power Phase design |
|
Chipset |
• |
AMD X570 |
Memory |
• |
Dual Channel DDR4 Memory Technology |
•4 x DDR4 DIMM Slots
•AMD Ryzen series CPUs (Matisse) support DDR4 4066+ (OC)/3466(OC)/3200/2933/2667/2400/2133 ECC & nonECC, un-buffered memory*
•AMD Ryzen series CPUs (Pinnacle Ridge) support DDR4 3466+(OC)/3200(OC)/2933/2667/2400/2133 ECC & nonECC, un-buffered memory*
•AMD Ryzen series CPUs (Picasso) support DDR4 3466+ (OC)/3200(OC)/2933/2667/2400/2133 non-ECC, un-buffered memory*
*For Ryzen Series CPUs (Picasso), ECC is only supported with PRO CPUs.
*Please refer to Memory Support List on ASRock’s website for more information. (http://www.asrock.com/)
*Please refer to page 22 for DDR4 UDIMM maximum frequency support.
•Max. capacity of system memory: 64GB
•15μ Gold Contact in DIMM Slots
Expansion AMD Ryzen series CPUs (Matisse)
Slot • 2 x PCI Express 4.0 x16 Slots (PCIE1/PCIE3: single at x16 (PCIE1); dual at x16 (PCIE1) / x4 (PCIE3))*
2
X570 Pro4
AMD Ryzen series CPUs (Pinnacle Ridge)
• 2 x PCI Express 3.0 x16 Slots (PCIE1/PCIE3: single at x16 (PCIE1); dual at x16 (PCIE1) / x4 (PCIE3))*
AMD Ryzen series CPUs (Picasso)
• 2 x PCI Express 3.0 x16 Slots (PCIE1/PCIE3: single at x8 (PCIE1); dual at x8 (PCIE1) / x4 (PCIE3))*
|
* Supports NVMe SSD as boot disks |
|
• 2 x PCI Express 4.0 x1 Slots |
|
• Supports AMD Quad CrossFireXTM and CrossFireXTM |
|
• 1 x M.2 Socket (Key E), supports type 2230 WiFi/BT module |
|
• 15μ Gold Contact in VGA PCIe Slot (PCIE1) |
Graphics |
• Integrated AMD RadeonTM Vega Series Graphics in Ryzen |
|
Series APU* |
|
* Actual support may vary by CPU |
|
• DirectX 12, Pixel Shader 5.0 |
|
• Shared memory default 2GB. Max Shared memory supports |
|
up to 16GB. |
|
* The Max shared memory 16GB requires 32GB system memory |
|
installed. |
|
• Dual graphics output: support HDMI and DisplayPort 1.2 |
|
ports by independent display controllers |
|
• Supports HDMI 1.4 with max. resolution up to 4K x 2K |
|
(4096x2160) @ 30Hz |
|
• Supports DisplayPort 1.2 with max. resolution up to 4K x 2K |
|
(4096x2160) @ 60Hz |
|
• Supports Auto Lip Sync, Deep Color (12bpc), xvYCC and |
|
HBR (High Bit Rate Audio) with HDMI 1.4 Ports (Compliant |
|
HDMI monitor is required) |
|
• Supports HDCP 1.4 with HDMI 1.4 and DisplayPort 1.2 |
|
Ports |
|
• Supports 4K Ultra HD (UHD) playback with HDMI 1.4 and |
|
DisplayPort 1.2 Ports |
|
• Supports Microsoft PlayReady® |
English
3
English
Audio |
• |
7.1 CH HD Audio with Content Protection (Realtek |
|
|
ALC1200 Audio Codec) |
|
• Premium Blu-ray Audio support |
|
|
• |
Supports Surge Protection |
|
• |
ELNA Audio Caps |
|
• |
PCB Isolate Shielding |
|
• Individual PCB Layers for R/L Audio Channel |
|
LAN |
• |
Gigabit LAN 10/100/1000 Mb/s |
|
• |
GigaLAN Intel® I211AT |
|
• Supports Wake-On-LAN |
|
|
• |
Supports Lightning/ESD Protection |
|
• Supports Energy Efficient Ethernet 802.3az |
|
|
• |
Supports PXE |
Rear Panel |
• |
3 x Antenna Ports (on I/O Panel Shield) |
I/O |
• |
1 x PS/2 Mouse/Keyboard Port |
|
• 1 x HDMI Port |
|
|
• 1 x DisplayPort 1.2 |
|
|
• 1 x USB 3.2 Gen2 Type-A Port (10 Gb/s) (Supports ESD |
|
|
|
Protection) |
|
• 1 x USB 3.2 Gen2 Type-C Port (10 Gb/s) (Supports ESD |
|
|
|
Protection) |
|
• 6 x USB 3.2 Gen1 Ports (Supports ESD Protection) |
|
|
• 1 x RJ-45 LAN Port with LED (ACT/LINK LED and SPEED |
|
|
|
LED) |
|
• HD Audio Jacks: Line in / Front Speaker / Microphone |
|
Storage |
• |
8 x SATA3 6.0 Gb/s Connectors, support RAID (RAID 0, |
|
|
RAID 1 and RAID 10), NCQ, AHCI and Hot Plug |
• 1 x Hyper M.2 Socket (M2_1), supports M Key type 2230/2242/2260/2280/22110 M.2 PCI Express module up to Gen4x4 (64 Gb/s) (with Matisse) or Gen3x4 (32 Gb/s) (with Pinnacle Ridge and Picasso)*
• 1 x Hyper M.2 Socket (M2_3), supports M Key type 2230/2242/2260/2280/22110 M.2 SATA3 6.0 Gb/s module and M.2 PCI Express module up to Gen4x4 (64 Gb/s) (with Matisse) or Gen3x4 (32 Gb/s) (with Pinnacle Ridge and Picasso)*
* Supports NVMe SSD as boot disks
* Supports ASRock U.2 Kit
4
X570 Pro4
Connector • 1 x COM Port Header
•1 x TPM Header
•1 x SPI TPM Header
•1 x Power LED and Speaker Header
•2 x RGB LED Headers
*Support in total up to 12V/3A, 36W LED Strip
•1 x Addressable LED Header
*Supports in total up to 5V/3A, 15W LED Strip
•1 x CPU Fan Connector (4-pin)
*The CPU Fan Connector supports the CPU fan of maximum 1A (12W) fan power.
•1 x CPU/Water Pump Fan Connector (4-pin) (Smart Fan Speed Control)
*The CPU/Water Pump Fan supports the water cooler fan of maximum 2A (24W) fan power.
•3 x Chassis/Water Pump Fan Connectors (4-pin) (Smart Fan Speed Control)
*The Chassis/Water Pump Fan supports the water cooler fan of maximum 2A (24W) fan power.
*CPU_FAN2/WP, CHA_FAN1/WP, CHA_FAN2/WP and CHA_FAN3/WP can auto detect if 3-pin or 4-pin fan is in use.
•1 x 24 pin ATX Power Connector
•1 x 8 pin 12V Power Connector
•1 x Front Panel Audio Connector
•1 x AMD LED Fan USB Header
•1 x Thunderbolt AIC Connector (5-pin) (Supports ASRock Thunderbolt AIC Card only)
•1 x USB 2.0 Header (Supports 2 USB 2.0 ports) (Supports ESD Protection)
•2 x USB 3.2 Gen1 Headers (Support 4 USB 3.2 Gen1 ports) (Supports ESD Protection)
BIOS |
• |
AMI UEFI Legal BIOS with GUI support |
Feature |
• |
Supports “Plug and Play” |
|
• ACPI 5.1 compliance wake up events |
|
|
• |
Supports jumperfree |
|
• |
SMBIOS 2.3 support |
• CPU, CPU VDDCR_SOC, DRAM, VPPM, PREM VDD_ CLDO, PERM VDDCR_SOC, +1.8V, VDDP, VDDG, CPU Load-Line Calibration, CPU VDDCR_SOC Load-Line Calibration Voltage Multi-adjustment
English
5
Hardware |
• Temperature Sensing: CPU, CPU/Water Pump, Chassis, |
Monitor |
Chassis/Water Pump Fans |
|
• Fan Tachometer: CPU, CPU/Water Pump, Chassis, Chassis/ |
|
Water Pump Fans |
|
• Quiet Fan (Auto adjust chassis fan speed by CPU tempera- |
|
ture): CPU, CPU/Water Pump, Chassis, Chassis/Water |
|
Pump Fans |
|
• Fan Multi-Speed Control: CPU, CPU/Water Pump, Chassis, |
|
Chassis/Water Pump Fans |
|
• Voltage monitoring: +12V, +5V, +3.3V, CPU Vcore, CPU VD- |
|
DCR_SOC, DRAM, PREM VDDCR_SOC, +1.8V, VDDP |
OS |
• Microsoft® Windows® 10 64-bit |
Certifica- |
• FCC, CE |
tions |
• ErP/EuP ready (ErP/EuP ready power supply is required) |
* For detailed product information, please visit our website: http://www.asrock.com
Please realize that there is a certain risk involved with overclocking, including adjusting the setting in the BIOS, applying Untied Overclocking Technology, or using third-party overclocking tools. Overclocking may affect your system’s stability, or even cause damage to the components and devices of your system. It should be done at your own risk and expense. We are not responsible for possible damage caused by overclocking.
English
6
X570 Pro4
B:USB T:USB USB 2 1 3.2 Gen1 |
|
/Mouse |
Keyboard PS2 |
|
|
|
|
|
|
|
|
|
|
|
|
1 |
|
|
|
|
|
|
|
|
|
|
|
|
|
RGB_LED2 |
|||
|
|
|
|
|
|
CPU_FAN1 |
CPU_FAN2/WP |
|
|
|
|
|
||||
|
|
ATX12V1 |
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
DP1 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
HDMI1 |
|
|
|
|
|
|
|
|
|
AM4 SOCKET |
X570 PRO4 |
DDR4 A1(64bit,288-pinmodule) |
DDR4 A2(64bit,288-pinmodule) |
DDR4 B1(64bit,288-pinmodule) |
DDR4 B2(64bit,288-pinmodule) |
|
USB 3.2 Gen1 |
|
|
|
|
|
|
|
|
||||||||
T: USB3 |
|
|
|
|
|
|
|
|
|
ATXPWR1 |
||||||
B: USB4 |
|
|
|
|
|
|
|
|
|
|||||||
USB 3.2 Gen2 |
|
|
|
|
|
|
|
|||||||||
T: USB31_TA_1 |
|
|
|
|
|
|
|
|||||||||
B: USB31_TC_1 |
|
|
|
|
|
|
|
|||||||||
|
|
|
|
|
|
|
|
|
|
|||||||
USB 3.2 Gen1 |
Top: |
|
|
|
|
|
|
|
|
|
|
|
|
|
||
T: USB5 |
|
|
RJ-45 |
|
|
|
|
|
|
|
|
|
|
|
|
|
B: USB6 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
SPI_TPM_J1 |
|
|
|
|
|
8 |
|
|
|
|
CHA_FAN3/WP |
|
|
|
|
|
|
|
|
|
|
|
7_ |
|
MI Bottom: CI N |
FRONT |
Center: |
LINE Top: IN |
|
|
|
|
|
1 |
|
|
|
|
|
|
USB3_ |
|
|
|
|
|
|
|
1 |
|
|
|
|
|||||
|
|
|
|
|
|
|
|
|
|
|
USB_1 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1 |
|
|
|
|
|
|
PCIE1 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
M2 1 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
CHA_FAN1/WP |
|
|
|
|
|
|
|
2 |
|
|
|
|
|
|
|
|
|
|
|
|
RoHS |
|
|
|
M2 |
|
|
|
|
|
AMD |
|
SATA3 5 6 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||
|
|
|
|
|
PCIE2 |
|
|
|
|
|
|
Premium |
|
|||
|
|
|
|
|
|
|
CMOS |
|
|
|
|
|
||||
|
|
|
|
|
|
1 |
|
|
|
X570 |
|
|
||||
|
|
|
|
|
|
|
TB1 |
Battery |
|
|
|
|
|
|
7 8 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
_ |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
SATA3 |
|
|
|
|
|
|
PCIE3 |
|
|
|
|
|
|
|
|
SATA3 1 2 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
M2 3 |
|
|
|
|
|
|
|
|
PCIE4 |
|
|
|
|
|
|
|
SPK_PLED1 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1 |
|
|
|
|
|
|
|
|
|
COM1 |
|
|
CHA_FAN2/WP |
USB3_9_10 |
|
USB_2_3 |
PLED PWRBTN |
|
|
|
|
|
|
|
HD_AUDIO1 |
|
|
|
|
|
|
|
|
|
||||
|
|
|
|
|
TPMS1 |
|
ADDR_LED1 |
|
|
|
|
CLRCMOS1 |
|
|
|
|
|
|
|
|
|
1 |
1 |
1 |
|
1 |
1 |
|
1 |
|
|
|
|
|
|
|
1 |
1 |
|
|
1 |
|
|
|
|
|||||
|
|
|
|
|
RGB_LED1 |
|
|
|
|
HDLED RESET |
SATA3_3 |
|
SATA3_4 |
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
PANEL1 |
|
|
|
English
7
No. Description
1ATX 12V Power Connector (ATX12V1)
2CPU Fan Connector (CPU_FAN1)
3CPU Fan / Waterpump Fan Connector (CPU_FAN2/WP)
42 x 288-pin DDR4 DIMM Slots (DDR4_A1, DDR4_B1)
52 x 288-pin DDR4 DIMM Slots (DDR4_A2, DDR4_B2)
6RGB LED Header (RGB_LED2)
7ATX Power Connector (ATXPWR1)
8USB 3.2 Gen1 Header (USB3_7_8)
9AMD LED Fan USB Header (USB_1)
10SPI TPM Header (SPI_TPM_J1)
11Chassis Fan / Waterpump Fan Connector (CHA_FAN1/WP)
12SATA3 Connector (SATA3_5_6)
13SATA3 Connector (SATA3_7_8)
14SATA3 Connector (SATA3_1_2)
15Power LED and Speaker Header (SPK_PLED1)
16SATA3 Connector (SATA3_4)
17SATA3 Connector (SATA3_3)
18System Panel Header (PANEL1)
19Clear CMOS Jumper (CLRCMOS1)
20USB 2.0 Header (USB_2_3)
21USB 3.2 Gen1 Header (USB3_9_10)
22Chassis Fan / Waterpump Fan Connector (CHA_FAN2/WP)
23Addressable LED Header (ADDR_LED1)
24RGB LED Header (RGB_LED1)
25COM Port Header (COM1)
26TPM Header (TPMS1)
27Front Panel Audio Header (HD_AUDIO1)
28Thunderbolt AIC Header (TB1)
29Chassis Fan / Waterpump Fan Connector (CHA_FAN3/WP)
English
8
X570 Pro4
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
4 |
||
|
1 |
|
2 |
|
|
|
|
3 |
|
5 |
|||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
12 |
11 |
10 |
9 |
|
8 |
7 |
6 |
No. |
Description |
|
|
|
No. |
Description |
|
|
|
|
|
|
|||||
1 |
PS/2 Mouse/Keyboard Port |
|
7 |
USB |
3.2 Gen1 Ports (USB3_5_6) |
|||
2 |
USB 3.2 Gen2 Type-A Port (USB31_TA_1) |
8 |
USB |
3.2 Gen2 Type-C Port (USB31_TC_1) |
||||
3 |
LAN RJ-45 Port* |
|
|
9 |
USB |
3.2 Gen1 Ports (USB3_3_4) |
||
4 |
Line In (Light Blue) |
|
|
10 |
HDMI Port |
|
||
5 |
Front Speaker (Lime) |
|
|
11 |
DisplayPort 1.2 |
|
||
6 |
Microphone (Pink) |
|
|
12 |
USB |
3.2 Gen1 Ports (USB3_1_2) |
||
|
|
|
|
|
|
|
|
|
English
9
* There are two LEDs on each LAN port. Please refer to the table below for the LAN port LED indications.
ACT/LINK LED
|
|
SPEED LED |
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
|
LAN Port |
|
|
|
|
|
|
||||
Activity / Link LED |
|
Speed LED |
|
|
|||||||
|
|
|
|||||||||
Status |
|
Description |
|
Status |
|
Description |
|||||
Off |
|
No Link |
|
Off |
|
10Mbps connection |
|||||
|
|
|
|||||||||
Blinking |
|
Data Activity |
|
Orange |
|
100Mbps connection |
|||||
On |
|
Link |
|
Green |
|
1Gbps connection |
|||||
|
|
|
|
|
|
|
|
|
|
|
|
English
10
X570 Pro4
This is an ATX form factor motherboard. Before you install the motherboard, study the configuration of your chassis to ensure that the motherboard fits into it.
Pre-installation Precautions
Take note of the following precautions before you install motherboard components or change any motherboard settings.
•Make sure to unplug the power cord before installing or removing the motherboard. Failure to do so may cause physical injuries to you and damages to motherboard components.
•In order to avoid damage from static electricity to the motherboard’s components, NEVER place your motherboard directly on a carpet. Also remember to use a grounded wrist strap or touch a safety grounded object before you handle the components.
•Hold components by the edges and do not touch the ICs.
•Whenever you uninstall any components, place them on a grounded anti-static pad or in the bag that comes with the components.
•When placing screws to secure the motherboard to the chassis, please do not overtighten the screws! Doing so may damage the motherboard.
English
11
Unplug all power cables before installing the CPU.
1
2
English
12
X570 Pro4
3
English
13
After you install the CPU into this motherboard, it is necessary to install a larger heatsink and cooling fan to dissipate heat. You also need to spray thermal grease between the CPU and the heatsink to improve heat dissipation. Make sure that the CPU and the heatsink are securely fastened and in good contact with each other.
Please turn off the power or remove the power cord before changing a CPU or heatsink.
Installing the CPU Box Cooler SR1
1
2
English
14
3
4
|
N1 |
FA |
|
U_ |
|
CP |
|
X570 Pro4
English
15
Installing the AM4 Box Cooler SR2
1
2
English
16
X570 Pro4
3
English
17
4
|
N1 |
FA |
|
_ |
|
PU |
|
C |
|
English
18
X570 Pro4
Installing the AM4 Box Cooler SR3
1
2
English
19
3
4
English
20
X570 Pro4
5
4-pin FAN cable
|
1 |
N |
|
_FA |
|
PU |
|
C |
|
6
|
|
1 |
|
N |
|
FA |
|
|
_ |
|
|
PU |
|
|
C |
|
|
|
5 |
|
_ |
B |
|
S |
|
U |
|
Please note that this connector is the interface to the LED control board on the SR3, it requires the AMD
utility "SR3 Settings Software" to control the LED. |
|
*The diagrams shown here are for reference only. The headers might be in a different position on your |
|
motherboard. Please refer to page 29 for the orientation of AMD LED Fan USB Header (USB_1). |
21 |
|
English
English
This motherboard provides four 288-pin DDR4 (Double Data Rate 4) DIMM slots, and supports Dual Channel Memory Technology.
1.For dual channel configuration, you always need to install identical (the same brand, speed, size and chip-type) DDR4 DIMM pairs.
2.It is unable to activate Dual Channel Memory Technology with only one or three memory module installed.
3.It is not allowed to install a DDR, DDR2 or DDR3 memory module into a DDR4 slot; otherwise, this motherboard and DIMM may be damaged.
4.We suggest that you install the memory modules on DDR4_A2 and DDR4_B2 first for better DRAM compatibility on 2 DIMMs configuration.
AMD non-XMP Memory Frequency Support
Ryzen Series CPUs (Matisse):
|
UDIMM Memory Slot |
|
Frequency |
|
A1 |
A2 |
B1 |
B2 |
(Mhz) |
- |
SR |
- |
- |
3200 |
- |
DR |
- |
- |
3200 |
- |
SR |
- |
SR |
3200 |
- |
DR |
- |
DR |
3200 |
SR |
SR |
SR |
SR |
2933 |
SR/DR |
DR |
SR/DR |
DR |
2667 |
SR/DR |
SR/DR |
SR/DR |
SR/DR |
2667 |
Ryzen Series CPUs (Pinnacle Ridge):
|
|
UDIMM Memory Slot |
|
Frequency |
|
|
A1 |
A2 |
B1 |
B2 |
(Mhz) |
|
- |
SR |
- |
- |
2933 |
|
- |
DR |
- |
- |
2933 |
|
- |
SR |
- |
SR |
2933 |
|
- |
DR |
- |
DR |
2933 |
|
SR |
SR |
SR |
SR |
2933 |
|
SR/DR |
DR |
SR/DR |
DR |
2667 |
22 |
SR/DR |
SR/DR |
SR/DR |
SR/DR |
2133-2400 |
|
|
|
|
|