ASRock M3A760GMH User Manual

5 (1)

Copyright Notice:

No part of this installation guide may be reproduced, transcribed, transmitted, or translated in any language, in any form or by any means, except duplication of documentation by the purchaser for backup purpose, without written consent of ASRock Inc.

Products and corporate names appearing in this guide may or may not be registered trademarks or copyrights of their respective companies, and are used only for identification or explanation and to the owners’ benefit, without intent to infringe.

Disclaimer:

Specifications and information contained in this guide are furnished for informational use only and subject to change without notice, and should not be constructed as a commitment by ASRock. ASRock assumes no responsibility for any errors or omissions that may appear in this guide.

With respect to the contents of this guide, ASRock does not provide warranty of any kind, either expressed or implied, including but not limited to the implied warranties or conditions of merchantability or fitness for a particular purpose. In no event shall ASRock, its directors, officers, employees, or agents be liable for any indirect, special, incidental, or consequential damages (including damages for loss of profits, loss of business, loss of data, interruption of business and the like), even if ASRock has been advised of the possibility of such damages arising from any defect or error in the guide or product.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1)this device may not cause harmful interference, and

(2)this device must accept any interference received, including interference that may cause undesired operation.

CALIFORNIA, USA ONLY

The Lithium battery adopted on this motherboard contains Perchlorate, a toxic substance controlled in Perchlorate Best Management Practices (BMP) regulations passed by the California Legislature. When you discard the Lithium battery in California, USA, please follow the related regulations in advance.

“Perchlorate Material-special handling may apply, see www.dtsc.ca.gov/hazardouswaste/perchlorate

ASRock Website: http://www.asrock.com

Published October 2010

Copyright©2010 ASRock INC. All rights reserved.

1

English

ASRock M3A760GMH Motherboard

ASRock M3A760GMH User Manual

Motherboard Layout

English

2

1

PS2_USB_PW1 Jumper

19

SATAII Connector (SATAII_2 (PORT 1), Blue)

2

CPU Fan Connector (CPU_FAN1)

20

SATAII Connector (SATAII_1 (PORT 0), Blue)

3

ATX 12V Power Connector (ATX12V1)

21

System Panel Header (PANEL1, White)

4

CPU Heatsink Retention Module

22

Chassis Speaker Header

5

AM3 CPU Socket

 

(SPEAKER 1, White)

6

2 x 240-pin DDR3 DIMM Slots

23

USB 2.0 Header (USB10_11, Blue)

 

(Dual Channel A: DDR3_A1, DDR3_B1; Blue)

24

Clear CMOS Jumper (CLRCMOS1)

7

2 x 240-pin DDR3 DIMM Slots

25

Infrared Module Header (IR1)

 

(Dual Channel B: DDR3_A2, DDR3_B2; White)

26

Floppy Connector (FLOPPY1)

8

ATX Power Connector (ATXPWR1)

27

Serial Port Connector (COM1)

9

USB_PW1 Jumper

28

Internal Audio Connector: CD1 (Black)

10

Primary IDE Connector (IDE1, Blue)

29

Front Panel Audio Header

11

USB 2.0 Header (USB6_7, Blue)

 

(HD_AUDIO1, White)

12

Chassis Fan Connector (CHA_FAN1)

30

PCI Slots (PCI1-2)

13

USB 2.0 Header (USB8_9, Blue)

31

PCI Express 2.0 x16 Slot (PCIE2; Blue)

14

Southbridge Controller

32

PCI Express 2.0 x1 Slot (PCIE1; White)

15

SPI Flash Memory (8Mb)

33

Power Fan Connector (PWR_FAN1)

16

SATAII Connector (SATAII_5 (PORT 4), Blue)

34

Northbridge Controller

17

SATAII Connector (SATAII_4 (PORT 3), Blue)

35

USB_PW2 Jumper

18

SATAII Connector (SATAII_3 (PORT 2), Blue)

 

 

ASRock M3A760GMH Motherboard

I/O Panel

1

USB 2.0 Ports (USB23)

** 9

Front Speaker (Lime)

2

VGA/D-Sub Port

10

Microphone (Pink)

3

USB 2.0 Ports (USB45)

11

USB 2.0

Port (USB0)

* 4

LAN RJ-45 Port

12

USB 2.0

Port (USB1)

5

Central / Bass (Orange)

13

eSATAII Port (eSATA1)

6

Rear Speaker (Black)

14

VGA/HDMI Port

7

Optical SPDIF Out Port

15

VGA/DVI-D Port

8

Line In (Light Blue)

16

PS/2 Keyboard Port (Purple)

*There are two LED next to the LAN port. Please refer to the table below for the LAN port LED indications.

LAN Port LED Indications

Activity/Link LED

 

SPEED LED

ACT/LINK

SPEED

 

LED

LED

Status

Description

 

Status

 

Description

 

 

 

 

Off

No Link

 

Off

 

10Mbps connection

 

 

Blinking

Data Activity

 

Orange

 

100Mbps connection

 

 

 

 

 

 

 

 

 

 

On

Link

 

Green

 

1Gbps connection

LAN Port

 

 

 

 

 

 

**If you use 2-channel speaker, please connect the speaker’s plug into “Front Speaker Jack”. See the table below for connection details in accordance with the type of speaker you use.

TABLE for Audio Output Connection

Audio Output Channels

Front Speaker

Rear Speaker

Central / Bass

Line In

 

(No. 9)

(No. 6)

(No. 5)

(No. 8)

2

V

--

--

--

4

V

V

--

--

6

V

V

V

--

8

V

V

V

V

To enable Multi-Streaming function, you need to connect a front panel audio cable to the front panel audio header. After restarting your computer, you will find “Mixer” tool on your system. Please select “Mixer ToolBox” , click “Enable playback multi-streaming”, and click

“ok”. Choose “2CH”, “4CH”, “6CH”, or “8CH” and then you are allowed to select “Realtek HDA Primary output” to use Rear Speaker, Central/Bass, and Front Speaker, or select “Realtek HDA Audio 2nd output” to use front panel audio.

3

English

ASRock M3A760GMH Motherboard

1. Introduction

Thank you for purchasing ASRock M3A760GMH motherboard, a reliable motherboard produced under ASRock’s consistently stringent quality control. It delivers excellent performance with robust design conforming to ASRock’s commitment to quality and endurance.

In this manual, chapter 1 and 2 contain introduction of the motherboard and step-by-step guide to the hardware installation. Chapter 3 and 4 contain the configuration guide to BIOS setup and information of the Support CD.

Because the motherboard specifications and the BIOS software might be updated, the content of this manual will be subject to change without notice. In case any modifications of this manual occur, the updated version will be available on ASRock website without further notice. You may find the latest VGA cards and CPU support lists on ASRock website as well. ASRock website http://www.asrock.com

If you require technical support related to this motherboard, please visit our website for specific information about the model you are using. www.asrock.com/support/index.asp

1.1Package Contents

ASRock M3A760GMH Motherboard

(Micro ATX Form Factor: 9.6-in x 9.0-in, 24.4 cm x 22.9 cm) ASRock M3A760GMH Quick Installation Guide

ASRock M3A760GMH Support CD

2 x Serial ATA (SATA) Data Cables (Optional)

1 x I/O Panel Shield

English

4

ASRock M3A760GMH Motherboard

1.2Specifications

Platform

- Micro ATX Form Factor: 9.6-in x 9.0-in, 24.4 cm x 22.9 cm

CPU

- Support for Socket AM3 processors: AMD PhenomTM II X6 /

 

X4 / X3 / X2 (except 920 / 940) / Athlon II X4 / X3 / X2 /

 

Sempron processors

 

- Six-Core CPU Ready

 

- Supports AMD OverDriveTM with ACC feature (Advanced

 

Clock Calibration)

 

- Supports AMD’s Cool ‘n’ QuietTM Technology

 

- FSB 2600 MHz (5.2 GT/s)

 

- Supports Untied Overclocking Technology (see CAUTION 1)

 

- Supports Hyper-Transport 3.0 (HT 3.0) Technology

Chipset

- Northbridge: AMD 760G

 

- Southbridge: AMD SB710

Memory

- Dual Channel DDR3 Memory Technology (see CAUTION 2)

 

- 4 x DDR3 DIMM slots

 

- Support DDR3 1800(OC)/1600(OC)/1333/1066/800 non-ECC,

 

un-buffered memory (see CAUTION 3)

 

- Max. capacity of system memory: 16GB (see CAUTION 4)

 

 

Expansion Slot

- 1 x PCI Express 2.0 x16 slot (blue @ x16 mode)

 

- 1 x PCI Express 2.0 x1 slot

 

- 2 x PCI slots

Graphics

- Integrated AMD Radeon HD 3000 graphics

 

- DX10 class iGPU, Pixel Shader 4.0

 

- Max. shared memory 512MB (see CAUTION 5)

 

- Three VGA Output options: D-Sub, DVI-D and HDMI

 

- Supports HDMI Technology with max. resolution up to

 

1920x1200 (1080P)

 

- Supports DVI with max. resolution up to 1920x1200 @ 75Hz

 

- Supports D-Sub with max. resolution up to 2048x1536

 

@ 60Hz

 

- Supports HDCP function with DVI and HDMI ports

 

- Supports Full HD 1080p Blu-ray (BD) / HD-DVD playback

 

with DVI and HDMI ports

Audio

- 7.1 CH HD Audio with Content Protection

 

(Realtek ALC892 Audio Codec)

 

- Premium Blu-ray audio support

 

 

English

5

ASRock M3A760GMH Motherboard

English

6

 

LAN

- PCIE x1 Gigabit LAN 10/100/1000 Mb/s

 

 

- Realtek RTL8111DL

 

 

- Supports Wake-On-LAN

 

Rear Panel I/O

I/O Panel

 

 

- 1 x PS/2 Keyboard Port

 

 

- 1 x VGA/D-Sub Port

 

 

- 1 x VGA/DVI-D Port

 

 

- 1 x HDMI Port

 

 

- 1 x Optical SPDIF Out Port

 

 

- 6 x Ready-to-Use USB 2.0 Ports

 

 

- 1 x eSATAII Connector

 

 

- 1 x RJ-45 LAN Port with LED (ACT/LINK LED and SPEED LED)

 

 

- HD Audio Jack: Rear Speaker/Central/Bass/Line in/

 

 

Front Speaker/Microphone (see CAUTION 6)

 

 

 

 

Connector

- 5 x Serial ATAII 3.0Gb/s connectors, support RAID (RAID 0,

 

 

RAID 1, RAID 10 and JBOD), NCQ, AHCI and “Hot Plug”

 

 

functions (see CAUTION 7)

 

 

- 1 x ATA133 IDE connector (supports 2 x IDE devices)

 

 

- 1 x Floppy connector

 

 

- 1 x IR header

 

 

- 1 x COM port header

 

 

- CPU/Chassis/Power FAN connector

 

 

- 24 pin ATX power connector

 

 

- 4 pin 12V power connector

 

 

- CD in header

 

 

- Front panel audio connector

 

 

- 3 x USB 2.0 headers (support 6 USB 2.0 ports)

 

BIOS Feature

- 8Mb AMI BIOS

 

 

- AMI Legal BIOS

 

 

- Supports “Plug and Play”

 

 

- ACPI 1.1 Compliance Wake Up Events

 

 

- Supports jumperfree

 

 

- SMBIOS 2.3.1 Support

 

 

- VCCM, NB, SB Voltage Multi-adjustment

 

Support CD

- Drivers, Utilities, AntiVirus Software (Trial Version), AMD

 

 

OverDriveTM Utility, ASRock Software Suite (CyberLink DVD

 

 

Suite - OEM and Trial; Creative Sound Blaster X-Fi MB - Trial)

 

 

 

 

Unique Feature

- ASRock OC Tuner (see CAUTION 8)

 

 

- Intelligent Energy Saver (see CAUTION 9)

 

 

- Instant Boot

 

 

- ASRock Instant Flash (see CAUTION 10)

 

 

- ASRock OC DNA (see CAUTION 11)

 

 

 

ASRock M3A760GMH Motherboard

 

- Hybrid Booster:

 

- CPU Frequency Stepless Control (see CAUTION 12)

 

- ASRock U-COP (see CAUTION 13)

 

- Boot Failure Guard (B.F.G.)

Hardware

- CPU Temperature Sensing

Monitor

- Chassis Temperature Sensing

 

- CPU/Chassis/Power Fan Tachometer

 

- CPU Quiet Fan

 

- Voltage Monitoring: +12V, +5V, +3.3V, Vcore

 

 

OS

- Microsoft® Windows® 7 / 7 64-bit / VistaTM / VistaTM 64-bit

 

/ XP / XP Media Center / XP 64-bit compliant

 

 

Certifications

- FCC, CE, WHQL

 

- ErP/EuP Ready (ErP/EuP ready power supply is required)

 

(see CAUTION 14)

* For detailed product information, please visit our website: http://www.asrock.com

WARNING

Please realize that there is a certain risk involved with overclocking, including adjusting the setting in the BIOS, applying Untied Overclocking Technology, or using the thirdparty overclocking tools. Overclocking may affect your system stability, or even cause damage to the components and devices of your system. It should be done at your own risk and expense. We are not responsible for possible damage caused by overclocking.

English

7

ASRock M3A760GMH Motherboard

English

8

CAUTION!

1.This motherboard supports Untied Overclocking Technology. Please read “Untied Overclocking Technology” on page 24 for details.

2.This motherboard supports Dual Channel Memory Technology. Before you implement Dual Channel Memory Technology, make sure to read the installation guide of memory modules on page 12 for proper installation.

3.Whether 1800/1600MHz memory speed is supported depends on the AM3 CPU you adopt. If you want to adopt DDR3 1800/1600 memory module on this motherboard, please refer to the memory support list on our website for the compatible memory modules.

ASRock website http://www.asrock.com

4.Due to the operating system limitation, the actual memory size may be less than 4GB for the reservation for system usage under Windows® 7 / VistaTM / XP. For Windows® OS with 64-bit CPU, there is no such limitation.

5.The maximum shared memory size is defined by the chipset vendor and is subject to change. Please check AMD website for the latest information.

6.For microphone input, this motherboard supports both stereo and mono modes. For audio output, this motherboard supports 2-channel, 4-channel, 6-channel, and 8-channel modes. Please check the table on page 3 for proper connection.

7.Before installing SATAII hard disk to SATAII connector, please read the “SATAII Hard Disk Setup Guide” on page 26 of “User Manual” in the support CD to adjust your SATAII hard disk drive to SATAII mode. You can also connect SATA hard disk to SATAII connector directly.

8.It is a user-friendly ASRock overclocking tool which allows you to surveil your system by hardware monitor function and overclock your hardware devices to get the best system performance under Windows® environment. Please visit our website for the operation procedures of ASRock OC Tuner. ASRock website: http://www.asrock.com

9.Featuring an advanced proprietary hardware and software design, Intelligent Energy Saver is a revolutionary technology that delivers unparalleled power savings. The voltage regulator can reduce the number of output phases to improve efficiency when the CPU cores are idle. In other words, it is able to provide exceptional power saving and improve power efficiency without sacrificing computing performance. To use Intelligent Energy Saver function, please enable Cool ‘n’ Quiet option in the BIOS setup in advance. Please visit our website for the operation procedures of Intelligent Energy Saver.

ASRock website: http://www.asrock.com

ASRock M3A760GMH Motherboard

10.ASRock Instant Flash is a BIOS flash utility embedded in Flash ROM. This convenient BIOS update tool allows you to update system BIOS without entering operating systems first like MS-DOS or Windows®. With this utility, you can press <F6> key during the POST or press <F2> key to BIOS setup menu to access ASRock Instant Flash. Just launch this tool and save the new BIOS file to your USB flash drive, floppy disk or hard drive, then you can update your BIOS only in a few clicks without preparing an additional floppy diskette or other complicated flash utility. Please be noted that the USB flash drive or hard drive must use FAT32/16/12 file system.

11.The software name itself – OC DNA literally tells you what it is capable of. OC DNA, an exclusive utility developed by ASRock, provides a convenient way for the user to record the OC settings and share with others. It helps you to save your overclocking record under the operating system and simplifies the complicated recording process of overclocking settings. With OC DNA, you can save your OC settings as a profile and share with your friends! Your friends then can load the OC profile to their own system to get the same OC settings as yours! Please be noticed that the OC profile can only be shared and worked on the same motherboard.

12.Although this motherboard offers stepless control, it is not recommended to perform over-clocking. Frequencies other than the recommended CPU bus frequencies may cause the instability of the system or damage the CPU.

13.While CPU overheat is detected, the system will automatically shutdown. Before you resume the system, please check if the CPU fan on the motherboard functions properly and unplug the power cord, then plug it back again. To improve heat dissipation, remember to spray thermal grease between the CPU and the heatsink when you install the PC system.

14.EuP, stands for Energy Using Product, was a provision regulated by European Union to define the power consumption for the completed system. According to EuP, the total AC power of the completed system shall be under 1.00W in off mode condition. To meet EuP standard, an EuP ready motherboard and an EuP ready power supply are required. According to Intel’s suggestion, the EuP ready power supply must meet the standard of 5v standby power efficiency is higher than 50% under 100 mA current consumption. For EuP ready power supply selection, we recommend you checking with the power supply manufacturer for more details.

English

9

ASRock M3A760GMH Motherboard

2. Installation

This is a Micro ATX form factor (9.6-in x 9.0-in, 24.4 cm x 22.9 cm) motherboard. Before you install the motherboard, study the configuration of your chassis to ensure that the motherboard fits into it.

Pre-installation Precautions

Take note of the following precautions before you install motherboard components or change any motherboard settings.

Before you install or remove any component, ensure that the power is switched off or the power cord is detached from the power supply. Failure to do so may cause severe damage to the motherboard, peripherals, and/or components.

1.Unplug the power cord from the wall socket before touching any component.

2.To avoid damaging the motherboard components due to static electricity, NEVER place your motherboard directly on the carpet or the like. Also remember to use a grounded wrist strap or touch a safety grounded object before you handle components.

3.Hold components by the edges and do not touch the ICs.

4.Whenever you uninstall any component, place it on a grounded antistatic pad or in the bag that comes with the component.

5.When placing screws into the screw holes to secure the motherboard to the chassis, please do not over-tighten the screws! Doing so may damage the motherboard.

English

1 0

ASRock M3A760GMH Motherboard

2.1CPU Installation

Step 1. Unlock the socket by lifting the lever up to a 90o angle.

Step 2. Position the CPU directly above the socket such that the CPU corner with the golden triangle matches the socket corner with a small triangle.

Step 3. Carefully insert the CPU into the socket until it fits in place.

The CPU fits only in one correct orientation. DO NOT force the CPU into the socket to avoid bending of the pins.

Step 4. When the CPU is in place, press it firmly on the socket while you push down the socket lever to secure the CPU. The lever clicks on the side tab to indicate that it is locked.

Lever 90° Up

 

 

 

CPU Golden Triangle

 

 

Socker Corner Small Triangle

 

STEP 1:

STEP 2 / STEP 3:

STEP 4:

Lift Up The Socket Lever

Match The CPU Golden Triangle

Push Down And Lock

 

To The Socket Corner Small

The Socket Lever

 

Triangle

 

2.2 Installation of CPU Fan and Heatsink

After you install the CPU into this motherboard, it is necessary to install a larger heatsink and cooling fan to dissipate heat. You also need to spray thermal grease between the CPU and the heatsink to improve heat dissipation. Make sure that the CPU and the heatsink are securely fastened and in good contact with each other. Then connect the CPU fan to the CPU FAN connector (CPU_FAN1, see Page 2, No. 2). For proper installation, please kindly refer to the instruction manuals of the CPU fan and the heatsink.

English

1 1

ASRock M3A760GMH Motherboard

2.3 Installation of Memory Modules (DIMM)

This motherboard provides four 240-pin DDR3 (Double Data Rate 3) DIMM slots, and supports Dual Channel Memory Technology. For dual channel configuration, you always need to install identical (the same brand, speed, size and chiptype) DDR3 DIMM pair in the slots of the same color. In other words, you have to install identical DDR3 DIMM pair in Dual Channel A (DDR3_A1 and DDR3_B1; Blue slots; see p.2 No.6) or identical DDR3 DIMM pair in Dual Channel B (DDR3_A2 and DDR3_B2; White slots; see p.2 No.7), so that Dual Channel Memory Technology can be activated. This motherboard also allows you to install four DDR3 DIMMs for dual channel configuration, and please install identical DDR3 DIMMs in all four slots. You may refer to the Dual Channel Memory Configuration Table below.

Dual Channel Memory Configurations

 

DDR3_A1

DDR3_B1

DDR3_A2

DDR3_B2

 

(Blue Slot)

(Blue Slot)

(White Slot)

(White Slot)

(1)

Populated

Populated

-

-

(2)

-

-

Populated

Populated

(3)*

Populated

Populated

Populated

Populated

* For the configuration (3), please install identical DDR3 DIMMs in all four slots.

English

1 2

1.If you want to install two memory modules, for optimal compatibility and reliability, it is recommended to install them in the slots of the same color. In other words, install them either in the set of blue slots (DDR3_A1 and DDR3_B1), or in the set of white slots (DDR3_A2 and DDR3_B2).

2.If only one memory module or three memory modules are installed in the DDR3 DIMM slots on this motherboard, it is unable to activate the Dual Channel Memory Technology.

3.If a pair of memory modules is NOT installed in the same Dual Channel, for example, installing a pair of memory modules in DDR3_A1 and DDR3_A2, it is unable to activate the Dual Channel Memory Technology .

4.It is not allowed to install a DDR or DDR2 memory module into DDR3 slot; otherwise, this motherboard and DIMM may be damaged.

5.If you adopt DDR3 1800/1600 memory modules on this motherboard, it is recommended to install them on DDR3_A2 and DDR3_B2 slots.

ASRock M3A760GMH Motherboard

Installing a DIMM

Please make sure to disconnect power supply before adding or removing DIMMs or the system components.

Step 1. Unlock a DIMM slot by pressing the retaining clips outward.

Step 2. Align a DIMM on the slot such that the notch on the DIMM matches the break on the slot.

The DIMM only fits in one correct orientation. It will cause permanent damage to the motherboard and the DIMM if you force the DIMM into the slot at incorrect orientation.

Step 3. Firmly insert the DIMM into the slot until the retaining clips at both ends fully snap back in place and the DIMM is properly seated.

English

1 3

ASRock M3A760GMH Motherboard

2.4 Expansion Slots (PCI and PCI Express Slots)

There are 2 PCI slots and 2 PCI Express slots on this motherboard.

PCI Slots: PCI slots are used to install expansion cards that have the 32-bit PCI interface.

PCIE Slots:

PCIE1 (PCIE x1 slot; White) is used for PCI Express cards with x1 lane width cards, such as Gigabit LAN card and SATA2 card.

PCIE2 (PCIE x16 slot; Blue) is used for PCI Express x16 lane width graphics cards.

Installing an expansion card

Step 1. Before installing the expansion card, please make sure that the power supply is switched off or the power cord is unplugged. Please read the documentation of the expansion card and make necessary hardware settings for the card before you start the installation.

Step 2. Remove the system unit cover (if your motherboard is already installed in a chassis).

Step 3. Remove the bracket facing the slot that you intend to use. Keep the screws for later use.

Step 4. Align the card connector with the slot and press firmly until the card is completely seated on the slot.

Step 5. Fasten the card to the chassis with screws. Step 6. Replace the system cover.

English

1 4

ASRock M3A760GMH Motherboard

Loading...
+ 31 hidden pages