Loading...
Version 1.0
Published April 2018
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1)this device may not cause harmful interference, and
(2)this device must accept any interference received, including interference that may cause undesired operation.
CALIFORNIA, USA ONLY
The Lithium battery adopted on this motherboard contains Perchlorate, a toxic substance controlled in Perchlorate Best Management Practices (BMP) regulations passed by the California Legislature. When you discard the Lithium battery in California, USA, please follow the related regulations in advance.
“Perchlorate Material-special handling may apply, see www.dtsc.ca.gov/hazardouswaste/ perchlorate”
AUSTRALIA ONLY
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage caused by our goods. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
The terms HDMI™ and HDMI High-Definition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.
Contents
Chapter 1 Introduction |
1 |
|
1.1 |
Package Contents |
1 |
1.2 |
Specifications |
2 |
1.3 |
Motherboard Layout |
6 |
1.4 |
Front Panel |
8 |
1.5 |
Rear Panel |
9 |
Chapter 2 Installation |
10 |
|
2.1 |
Installing the CPU |
11 |
2.2 |
Installing the CPU Fan and Heatsink |
14 |
2.3 |
Installing Memory Modules (SO-DIMM) |
15 |
2.4 |
Jumpers Setup |
16 |
2.5 |
Onboard Headers and Connectors |
17 |
2.6 |
Smart Switch |
19 |
2.7 |
M.2 WiFi/BT Module Installation Guide |
20 |
2.8 |
M.2_SSD (NGFF) Module Installation Guide (M2_1) |
22 |
Chapter 3 Software and Utilities Operation |
24 |
|
3.1 |
Installing Drivers |
24 |
Chapter 4 UEFI SETUP UTILITY |
25 |
|
4.1 |
Introduction |
25 |
4.1.1 |
UEFI Menu Bar |
25 |
4.1.2 |
Navigation Keys |
26 |
4.2 |
Main Screen |
27 |
4.3 |
Advanced Screen |
28 |
4.3.1 |
CPU Configuration |
29 |
4.3.2 |
DRAM Configuration |
32 |
4.3.3 |
Chipset Configuration |
33 |
4.3.4 |
Storage Configuration |
35 |
4.3.5 |
Super IO Configuration |
36 |
4.3.6 |
ACPI Configuration |
37 |
4.3.7 |
USB Configuration |
38 |
4.3.8 |
Trusted Computing |
39 |
4.4 |
Tools |
40 |
4.5 |
Hardware Health Event Monitoring Screen |
41 |
4.6 |
Security Screen |
42 |
4.7 |
Boot Screen |
43 |
4.8 |
Exit Screen |
46 |
H310D4-P1
Chapter 1 Introduction
Thank you for purchasing H310D4-P1 motherboard. In this documentation, Chapter 1 and 2 contains the introduction of the motherboard and step-by-step installation guides. Chapter 3 contains the operation guide of the software and utilities. Chapter 4 contains the configuration guide of the BIOS setup.
Because the motherboard specifications and the BIOS software might be updated, the content of this documentation will be subject to change without notice.
content of this documentation will be subject to change without notice.
1.1 Package Contents
•H310D4-P1 Motherboard
•H310D4-P1 Quick Installation Guide
•H310D4-P1 Support CD
•1 x Serial ATA(SATA) Data with Power Cable (Optional)
•1 x Screw for M.2 Socket (M2*2) (Optional)
•1 x Screw for WiFi Module (M2*2) (Optional)
English
1
1.2 Specifications
Platform |
• 6.7-in x 6.8-in, 17.0 cm x 17.2 cm |
CPU |
• Supports 8th Generation Intel® CoreTM Processors (Socket |
|
1151) |
|
• Supports CPU up to 65W |
|
• 5 Power Phase design |
|
• Supports Intel® Turbo Boost 2.0 Technology |
Chipset |
• Intel® H310 |
Memory |
• Dual Channel DDR4 Memory Technology |
|
• 2 x DDR4 SO-DIMM Slots |
|
• Supports DDR4 2666/2400/2133 non-ECC, un-buffered |
|
memory |
|
• Max. capacity of system memory: 32GB |
|
• Supports Intel® Extreme Memory Profile (XMP) 2.0 |
Expansion
Slot
Graphics
English
•1 x M.2 Socket (Key E), supports type 2230 WiFi/BT module
•Intel® UHD Graphics Built-in Visuals and the VGA outputs can be supported only with processors which are GPU integrated.
•Supports Intel® UHD Graphics Built-in Visuals : Intel® Quick Sync Video with AVC, MVC (S3D) and MPEG-2 Full HW Encode1, Intel® InTruTM 3D, Intel® Clear Video HD Technology, Intel® InsiderTM, Intel® UHD Graphics
•DirectX 12
•HWAEncode/Decode: AVC/H.264, HEVC/H.265 8-bit, HEVC/H.265 10-bit, VP8, VP9 8-bit, VP9 10-bit (Decode only), MPEG2, MJPEG, VC-1 (Decode only)
•Max. shared memory 1024MB
2
H310D4-P1
*The size of maximum shared memory may vary from different operating systems.
•Three graphics output options: D-Sub, HDMI and DisplayPort 1.2
*Supports up to 2 displays simultaneously
•Supports HDMI with max. resolution up to 4K x 2K (4096x2160) @ 30Hz
•Supports D-Sub with max. resolution up to 1920x1200 @ 60Hz
•Supports DisplayPort 1.2 with max. resolution up to 4K x 2K (4096x2304) @ 60Hz
•Supports Auto Lip Sync, Deep Color (12bpc), xvYCC and HBR (High Bit Rate Audio) with HDMI Port (Compliant HDMI monitor is required)
•Supports HDCP with HDMI and DisplayPort 1.2 Ports
•Supports 4K Ultra HD (UHD) playback with HDMI and DisplayPort 1.2 Ports
Audio |
• |
Realtek ALC233 Audio Codec |
|
• 1 x Headphone/Headset Jack |
|
|
• |
1 x MIC-In |
LAN |
• |
PCIE x1 Gigabit LAN 10/100/1000 Mb/s |
|
• |
Realtek RTL8111GH |
|
• Supports Wake-On-LAN |
|
|
• |
Supports Lightning/ESD Protection |
|
• Supports Energy Efficient Ethernet 802.3az |
|
|
• |
Supports PXE |
Front |
• |
1 x Power Button |
Panel I/O |
• |
1 x Headphone/Headset Jack |
• 2 x USB 3.1 Gen1 Type-A Ports (Supports ESD Protection)
• 2 x USB 3.1 Gen1 Type-C Ports (Supports ESD Protection)
• 1 x Microphone Input Jack
English
3
English
Rear Panel |
• 1 x DC Jack (Compatible with the 19V power adapter)* |
I/O |
* Please use 90W power adapter for 65W CPU and 65W power |
|
adapter for 35W CPU. |
•1 x Headphone Jack
•1 x D-Sub Port
•1 x HDMI Port
•1 x DisplayPort 1.2
•4 x USB 2.0 Ports (Support ESD Protection)
•1 x RJ-45 LAN Port with LED (ACT/LINK LED and SPEED LED)
Storage |
• 1 x SATA3 6.0 Gb/s with Power Connector , support NCQ, |
|
AHCI and Hot Plug |
•1 x Ultra M.2 Socket, support type 2280 M.2 SATA3 6.0 Gb/s module and M.2 PCI Express module up to Gen3 x4
(32 Gb/s)*
*Supports NVMe SSD as boot disks
Connector |
• |
1 x COM Port Header |
|
• 1 x Chassis Intrusion Header |
|
|
• 1 x CPU Fan Connector (4-pin) |
|
|
• 1 x Internal Speaker Header |
|
|
• 1 x Front Panel Header |
|
|
• 1 x Mono-Out Header |
|
|
• 1 x ROM Recovery Header |
|
BIOS |
• |
AMI UEFI Legal BIOS with multilingual GUI support |
Feature |
• |
ACPI 5.0 Compliant wake up events |
|
• |
SMBIOS 2.7 Support |
Hardware |
• |
CPU Temperature Sensing |
Monitor |
• |
CPU Fan Tachometer |
|
• CPU Quiet Fan (Auto adjust chassis fan speed by CPU |
|
|
|
temperature) |
|
• CPU Fan Multi-Speed Control |
|
|
• |
CASE OPEN detection |
|
• Voltage monitoring: +12V, +5V, +3.3V, CPU Vcore |
|
OS |
• |
Microsoft® Windows® 10 64-bit |
4
H310D4-P1
Certifica- |
• |
FCC, CE |
tions |
• |
ErP/EuP ready (ErP/EuP ready power supply is required) |
Please realize that there is a certain risk involved with overclocking, including adjusting the setting in the BIOS, applying Untied Overclocking Technology, or using third-party overclocking tools. Overclocking may affect your system’s stability, or even cause damage to the components and devices of your system. It should be done at your own risk and expense. We are not responsible for possible damage caused by overclocking.
English
5
1.3 Motherboard Layout |
|
|
|
|
|
1 |
2 |
3 |
|
HP OUT |
1 |
CMOS |
|
|
CLRMOS1 |
Battery |
|
|
|
|
|
|
|
|
|
|
|
CPU_FAN1 |
|
DP1 |
|
|
|
|
HDMI1 |
H310D4 |
A1 |
B1 |
|
|
-P1 |
DDR4 |
DDR4 |
|
VGA1 |
|
|
|
4 |
|
|
|
|
|
|
1 |
|
1 |
Headset |
8 |
|
|
MONO1 |
|
|
|
|
|
|
RJ-45 |
COM1 |
|
|
Mic In |
|
|
M.2 SSD |
|
|
T: USB 2.0 |
BUZZER1 |
|
|
|
USB3 |
|
|
USB 3.1 Gen1 |
|
RoHS |
|
|
||
|
|
T: USB_2 |
||
B: USB 2.0 |
|
|
|
|
|
|
|
B: USB31_TC_2 |
|
USB4 |
|
|
|
5 |
|
|
|
|
|
|
|
WLAN |
|
USB 3.1 Gen1 |
T: USB 2.0 |
|
|
|
T: USB_1 |
USB3 |
CI1 |
|
|
B: USB31_TC_1 |
|
|
|
||
1 |
|
|
|
|
B: USB 2.0 |
|
|
|
|
|
M.2 |
|
|
|
USB4 |
|
SATA1 |
|
|
|
|
BIOS |
|
Power |
|
|
ROM |
|
|
DC Jack |
|
|
1 |
Button |
|
|
|
||
|
|
|
ROM_R |
|
|
7 |
|
6 |
|
English
6
H310D4-P1
No. Description
1Clear CMOS Jumper (CLRMOS1)
22 x 260-pin DDR4 SO-DIMM Slots (DDR4_A1, DDR4_B1)
3CPU Fan Connector (CPU_FAN1)
42.5W Mono Out Speaker Header (MONO1)
5SATA3 Connector (SATA0)
6ROM Recovery Header (ROM_R)
7Chassis Intrusion Header (CI1)
8COM Port Header (COM1)
English
7
1.4 Front Panel
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1 |
2 |
|
|
4 |
|
6 |
|
7 |
|
|
|
|||
|
|
3 |
|
|
5 |
|
|
|
|
|
|
|
||
No. |
Description |
|
|
|
|
|
No. |
Description |
||||||
|
|
|
|
|
||||||||||
1 |
|
Power Button (SW1) |
|
|
|
|
|
5 |
USB 3.1 Gen1 Type-C Port |
|||||
2 |
|
USB 3.1 Gen1 Type-A Port (USB_1) |
|
|
|
(USB31_TC_2) |
||||||||
3 |
|
USB 3.1 Gen1 Type-C Port |
|
|
|
6 |
Microphone Input (AUDIO2) |
|||||||
|
|
(USB31_TC_1) |
|
|
|
|
|
7 |
Headphone/Headset Jack |
|||||
4 |
|
USB 3.1 Gen1 Type-A Port (USB_2) |
|
|
|
|
||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
English
8
H310D4-P1
1.5 Rear Panel
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1 |
|
2 |
|
3 |
|
4 |
|
5 |
|
|
|
|
6 |
|
|
7 |
|
|
8 |
|||||||
|
No. |
Description |
|
No. |
Description |
|
|
|
|
|
|
|
|
|
|
|
||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
||||||||||||||
1 |
Headphone Jack |
|
5 |
LAN RJ-45 Port* |
|
|
|
|
|
|
|
|
|
|
|
|||||||||||
2 |
Display Port |
|
6 |
USB 2.0 Ports (USB_4_5) |
|
|
|
|
|
|
||||||||||||||||
3 |
HDMI Port |
|
7 |
USB 2.0 Ports (USB_6_7) |
|
|
|
|
|
|
||||||||||||||||
4 |
D-Sub Port |
|
|
|
8 |
DC Jack |
|
|
|
|
|
|
|
|
|
|
|
|||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
* There are two LEDs on each LAN port. Please refer to the table below for the LAN port LED indications.
ACT/LINK LED
SPEED LED
LAN Port |
|
|
|
|
|
|
Activity / Link LED |
|
Speed LED |
|
|
||
Status |
|
Description |
|
Status |
|
Description |
Off |
|
No Link |
|
Off |
|
10Mbps connection |
|
|
|
||||
Blinking |
|
Data Activity |
|
Green |
|
100Mbps connection |
On |
|
Link |
|
Orange |
|
1Gbps connection |
English
9
Chapter 2 Installation
This is a Proprietary form factor motherboard. Before you install the motherboard, study the configuration of your chassis to ensure that the motherboard fits into it.
Pre-installation Precautions
Take note of the following precautions before you install motherboard components or change any motherboard settings.
•Make sure to unplug the power cord before installing or removing the motherboard components. Failure to do so may cause physical injuries and damages to motherboard components.
•In order to avoid damage from static electricity to the motherboard’s components, NEVER place your motherboard directly on a carpet. Also remember to use a grounded wrist strap or touch a safety grounded object before you handle the components.
•Hold components by the edges and do not touch the ICs.
•Whenever you uninstall any components, place them on a grounded anti-static pad or in the bag that comes with the components.
•When placing screws to secure the motherboard to the chassis, please do not overtighten the screws! Doing so may damage the motherboard.
English
10
H310D4-P1
2.1Installing the CPU
1.Before you insert the 1151-Pin CPU into the socket, please check if the PnP cap is on the socket, if the CPU surface is unclean, or if there are any bent pins in the socket. Do not force to insert the CPU into the socket if above situation is found. Otherwise, the CPU will be seriously damaged.
2.Unplug all power cables before installing the CPU.
1
A
B
2
English
11
Loading...