Version 1.0
Published January 2020
Copyright©2020 ASRock INC. All rights reserved.
Copyright Notice:
No part of this documentation may be reproduced, transcribed, transmitted, or translated in any language, in any form or by any means, except duplication of documentation by the purchaser for backup purpose, without written consent of ASRock Inc.
Products and corporate names appearing in this documentation may or may not be registered trademarks or copyrights of their respective companies, and are used only for identification or explanation and to the owners’ benefit, without intent to
infringe.
Disclaimer:
Specifications and information contained in this documentation are furnished for informational use only and subject to change without notice, and should not be constructed as a commitment by ASRock. ASRock assumes no responsibility for any errors or omissions that may appear in this documentation.
With respect to the contents of this documentation, ASRock does not provide warranty of any kind, either expressed or implied, including but not limited to the implied warranties or conditions of merchantability or fitness for a particular purpose.
In no event shall ASRock, its directors, officers, employees, or agents be liable for any indirect, special, incidental, or consequential damages (including damages for loss of profits, loss of business, loss of data, interruption of business and the like), even if ASRock has been advised of the possibility of such damages arising from any defect or error in the documentation or product.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1)this device may not cause harmful interference, and
(2)this device must accept any interference received, including interference that may cause undesired operation.
CALIFORNIA, USA ONLY
The Lithium battery adopted on this motherboard contains Perchlorate, a toxic substance controlled in Perchlorate Best Management Practices (BMP) regulations passed by the California Legislature. When you discard the Lithium battery in California, USA, please follow the related regulations in advance.
“Perchlorate Material-special handling may apply, see www.dtsc.ca.gov/hazardouswaste/ perchlorate”
ASRock Website: http://www.asrock.com
AUSTRALIA ONLY
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage caused by our goods. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. If you require assistance please call ASRock Tel : +886-2-28965588 ext.123 (Standard International call charges apply)
The terms HDMI® and HDMI High-Definition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.
Contents
Chapter 1 Introduction |
1 |
|
1.1 |
Package Contents |
1 |
1.2 |
Specifications |
2 |
1.3 |
Motherboard Layout |
5 |
1.4 |
I/O Panel |
7 |
Chapter 2 Installation |
9 |
|
2.1 |
Installation of Memory Modules (SO-DIMM) |
10 |
2.2 |
Expansion Slot (PCI Express Slot) |
12 |
2.3 |
Jumpers Setup |
13 |
2.4 |
Onboard Headers and Connectors |
14 |
2.5M.2 WiFi/BT Module and Intel® CNVi (Integrated WiFi/BT)
|
Installation Guide |
17 |
Chapter 3 Software and Utilities Operation |
19 |
|
3.1 |
Installing Drivers |
19 |
3.2 |
ASRock Live Update & APP Shop |
20 |
3.2.1 |
UI Overview |
20 |
3.2.2 |
Apps |
21 |
3.2.3 |
BIOS & Drivers |
24 |
3.2.4 |
Setting |
25 |
Chapter 4 UEFI SETUP UTILITY |
26 |
|
4.1 |
Introduction |
26 |
4.1.1 |
UEFI Menu Bar |
26 |
4.1.2 |
Navigation Keys |
27 |
4.2 |
Main Screen |
28 |
4.3 |
Advanced Screen |
29 |
4.3.1 |
CPU Configuration |
30 |
4.3.2 |
Chipset Configuration |
31 |
4.3.3 |
Storage Configuration |
33 |
4.3.4 |
Super IO Configuration |
35 |
4.3.5 |
ACPI Configuration |
36 |
4.4 |
Tools |
38 |
4.5 |
Hardware Health Event Monitoring Screen |
40 |
4.6 |
Security Screen |
41 |
4.7 |
Boot Screen |
42 |
4.8 |
Exit Screen |
44 |
J5040-ITX
J4125-ITX
Chapter 1 Introduction
Thank you for purchasing ASRock J5040-ITX/J4125-ITX motherboard, a reliable motherboard produced under ASRock’s consistently stringent quality control.
It delivers excellent performance with robust design conforming to ASRock’s commitment to quality and endurance.
In this manual, Chapter 1 and 2 contains the introduction of the motherboard and step-by-step installation guides. Chapter 3 contains the operation guide of the
software and utilities. Chapter 4 contains the configuration guide of the BIOS setup.
Because the motherboard specifications and the BIOS software might be updated, the content of this documentation will be subject to change without notice. In case any modifications of this documentation occur, the updated version will be available on ASRock’s website without further notice. If you require technical support related to this motherboard, please visit our website for specific information about the model you are using. You may find the latest VGA cards and CPU support list on ASRock’s website as well. ASRock website http://www.asrock.com.
1.1 Package Contents
•ASRock J5040-ITX/J4125-ITX Motherboard (Mini-ITX Form Factor)
•ASRock J5040-ITX/J4125-ITX Quick Installation Guide
•ASRock J5040-ITX/J4125-ITX Support CD
•2 x Serial ATA (SATA) Data Cables (Optional)
•1 x I/O Panel Shield
•1 x Screw for M.2 Socket (Optional)
English
1
English
1.2 Specifications
Platform |
• |
Mini-ITX Form Factor |
|
• |
Solid Capacitor design |
CPU |
• |
Intel® Quad-Core Pentium® Silver Processor J5040 (up to 3.2 |
|
|
GHz) (for J5040-ITX) |
|
• |
Intel® Quad-Core Processor J4125 (up to 2.7 GHz) |
|
|
(for J4125-ITX) |
Memory |
• |
Dual Channel DDR4 Memory Technology |
|
• |
2 x DDR4 SO-DIMM Slots |
|
* 2GB DRAM per module is not supported. |
|
|
• |
Supports DDR4 2400/2133 non-ECC, un-buffered memory |
|
• |
Max. capacity of system memory: 8GB |
Expansion |
• |
1 x PCI Express 2.0 x1 Slot |
Slot |
• |
1 x M.2 Socket (Key E), supports type 2230 WiFi/BT module |
|
|
and Intel® CNVi (Integrated WiFi/BT) |
Graphics |
• |
Integrated Intel® UHD Graphics 605: 18 EUs inside (Up to |
|
|
800MHz) (for J5040-ITX) |
|
• |
Integrated Intel® UHD Graphics 600: 12 EUs inside (Up to |
|
|
750MHz) (for J4125-ITX) |
|
• |
DX12, OpenGL 4.4, OGL ES 3.1, OpenCL 1.2 |
|
• |
HW Acceleration Decode: HEVC (H.265) 8 bit, HEVC |
|
|
(H.265)10 bit, H.264 @ Lvl5.2 (AVC), JPEG/MJPEG, VP8, |
|
|
VP9 8bit, VP9 10 bit |
|
• |
HW Acceleration Encode: HEVC (H.265) 8 bit, HEVC |
|
|
(H.265)10 bit, H.264 @ Lvl5.2 (AVC), JPEG/MJPEG, VP8, |
|
|
VP9 8bit |
|
• |
Three graphics output options: D-Sub, DVI-D and HDMI |
|
• |
Supports Triple Monitor |
|
• |
Supports HDMI with max. resolution up to 4K x 2K |
|
|
(4096x2160) @ 60Hz |
|
• |
Supports DVI-D with max. resolution up to 1920x1200 @ |
|
|
60Hz |
|
• |
Supports D-Sub with max. resolution up to 2048x1536 @ |
|
|
60Hz |
|
• |
Supports Auto Lip Sync, xvYCC and HBR (High Bit Rate |
|
|
Audio) with HDMI Port (Compliant HDMI monitor is |
|
|
required) |
2
|
|
|
J5040-ITX |
|
|
|
|
|
|
|
J4125-ITX |
|
• |
Supports HDCP 2.2 with DVI-D and HDMI Ports |
|
|
• |
Supports Full HD 1080p Blu-ray (BD) playback with DVI-D |
|
|
|
and HDMI Ports |
|
Audio |
• |
7.1 CH HD Audio with Content Protection (Realtek ALC892 |
|
|
|
Audio Codec) |
|
|
• |
Premium Blu-ray Audio support |
|
|
• |
Supports Surge Protection |
|
|
• |
ELNA Audio Caps |
|
LAN |
• |
PCIE x1 Gigabit LAN 10/100/1000 Mb/s |
|
|
• |
Realtek RTL8111H |
|
|
• |
Supports Wake-On-LAN |
|
|
• |
Supports Lightning/ESD Protection |
|
|
• |
Supports Energy Efficient Ethernet 802.3az |
|
|
• |
Supports PXE |
|
Rear Panel |
• |
1 x PS/2 Mouse Port |
|
I/O |
• |
1 x PS/2 Keyboard Port |
|
|
• |
1 x D-Sub Port |
|
|
• |
1 x DVI-D Port |
|
|
• |
1 x HDMI Port |
|
|
• |
1 x Optical SPDIF Out Port |
|
|
• |
2 x USB 2.0 Ports (Supports ESD Protection) |
|
|
• |
2 x USB 3.2 Gen1 Ports (Supports ESD Protection) |
|
|
• |
1 x RJ-45 LAN Port with LED (ACT/LINK LED and SPEED |
|
|
|
LED) |
|
|
• |
HD Audio Jacks: Rear Speaker / Central / Bass / Line in / |
|
|
|
Front Speaker / Microphone |
|
Storage |
• |
2 x SATA3 6.0 Gb/s Connectors, support NCQ, AHCI and |
|
|
|
Hot Plug |
|
|
• |
2 x SATA3 6.0 Gb/s Connectors by ASMedia ASM1061, |
|
|
|
support NCQ, AHCI and Hot Plug |
|
Connector |
• |
1 x COM Port Header |
|
|
• |
1 x Chassis Intrusion and Speaker Header |
|
|
• |
1 x CPU Fan Connector (3-pin) |
|
|
• |
1 x Chassis Fan Connector (3-pin) |
|
|
• |
1 x 24 pin ATX Power Connector |
|
|
• |
1 x Front Panel Audio Connector |
|
English
3
BIOS
Feature
Hardware
Monitor
OS
Certifications
•2 x USB 2.0 Headers (Support 3 USB 2.0 ports) (Supports ESD Protection)
•1 x USB 3.2 Gen1 Header (Supports 2 USB 3.2 Gen1 ports) (Supports ESD Protection)
*USB3_0_1 is shared with USB_0_1.
•AMI UEFI Legal BIOS with GUI support
•Supports Plug and Play
•ACPI 5.0 compliant wake up events
•Supports jumperfree
•SMBIOS 3.0 support
•CPU/Chassis temperature sensing
•CPU/Chassis Fan Tachometer
•CPU/Chassis Quiet Fan (Auto adjust chassis fan speed by CPU temperature)
•CPU/Chassis Fan multi-speed control
•CASE OPEN detection
•Voltage monitoring: +12V, +5V, +3.3V, CPU Vcore
•Microsoft® Windows® 10 64-bit
•FCC, CE
•ErP/EuP ready (ErP/EuP ready power supply is required)
* For detailed product information, please visit our website: http://www.asrock.com
English
4
J5040-ITX
J4125-ITX
1.3 Motherboard Layout
1
Keyboard PS2 |
Mous PS2 e |
|
|
VGA1 |
DVI1 |
HDMI1
USB 3.2 Gen1 T: USB0
B: USB1
BIOS
CMOS ROM Battery
RoHS
CPU_FAN1
M2
DDR4 |
ATXPWR1 |
|
|
||
|
||
A1_ |
|
|
2
USB 2.0 |
|
|
RJ |
|
|
|||
|
|
-LA45 |
|
|
||||
T: USB0 |
|
|
|
|
||||
|
|
|
|
|
|
|||
B: USB1 |
|
|
N |
|
LAN |
|||
|
|
|
|
|
|
|||
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
SPDIF Optical Bottom: |
REARSPK |
Center: |
Central/Bass |
Top: |
HD_AUDIO1 |
|||
|
|
|
|
|
|
|
|
|
MI Bottom: INC |
FRONT |
Center: |
LININE |
op:T |
|
1 |
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
AUDIO |
|
|
|
|
|
|
|
|
CODEC |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
PANEL1 |
|||
PWRBTN |
|
|
|
RESET |
|
|
|
||
|
|
|||
|
|
|
||
PLED |
|
|
|
HDLED |
1
|
|
|
SPK_CI1 |
|
|
DDR4_B1 |
|
|
|
|
1 |
|
|
|
CLRMOS1 |
|
|
|
1 |
|
|
USB_2 |
USB_0_1 |
|
|
|
|
|
|
1 |
|
SATA3_A1 |
SATA3_1 |
1 |
|
|
|
USB3_0_1 |
COM1 |
SATA3_A2 |
SATA3_2 |
|
|
|
1 |
|
|
|
PCIE1
3
4
5
6
7
16 |
15 |
14 |
13 |
12 11 |
10 |
9 |
8 |
English
5
No. Description
1CPU Fan Connector (CPU_FAN1)
2ATX Power Connector (ATXPWR1)
3System Panel Header (PANEL1)
42 x 260-pin DDR4 SO-DIMM Slots (DDR4_A1, DDR4_B1)
5Chassis Intrusion and Speaker Header (SPK_CI1)
6Clear CMOS Jumper (CLRMOS1)
7Chassis Fan Connector (CHA_FAN1)
8COM Port Header (COM1)
9USB 2.0 Header (USB_0_1)
10USB 3.2 Gen1 Header (USB3_0_1)
11USB 2.0 Header (USB_2)
12SATA3 Connector (SATA3_1)
13SATA3 Connector (SATA3_2)
14SATA3 Connector (SATA3_A2)
15SATA3 Connector (SATA3_A1)
16Front Panel Audio Header (HD_AUDIO1)
English
6
J5040-ITX
J4125-ITX
1.4 I/O Panel
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
4 |
6 |
|
1 |
2 |
|
|
|
|
3 |
|
|
|
|
5 |
7 |
||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
14 |
13 |
12 |
|
11 |
10 |
9 |
8 |
No. |
Description |
|
|
No. |
Description |
|
|
|
|
|
|
|
|
||||
1 |
PS/2 Mouse Port |
|
8 |
Microphone (Pink) |
|
|
||
2 |
D-Sub Port |
|
|
9 |
Optical SPDIF Out Port |
|
|
|
3 |
LAN RJ-45 Port* |
|
10 |
USB 2.0 Ports (USB_01) |
|
|
||
4 |
Central / Bass (Orange) |
|
11 |
USB 3.2 Gen1 Ports (USB3_01) |
||||
5 |
Rear Speaker (Black) |
|
12 |
HDMI Port |
|
|
|
|
6 |
Line In (Light Blue) |
|
13 |
DVI-D Port |
|
|
|
|
7 |
Front Speaker (Lime)** |
|
14 |
PS/2 Keyboard Port |
|
|
||
|
|
|
|
|
|
|
|
|
English
7
*There are two LEDs on each LAN port. Please refer to the table below for the LAN port LED indications.
ACT/LINK LED SPEED LED
LAN Port |
|
|
|
|
|
|
Activity / Link LED |
|
Speed LED |
|
|
||
|
|
|
||||
Status |
|
Description |
|
Status |
|
Description |
Off |
|
No Link |
|
Off |
|
10Mbps connection |
|
|
|
||||
Blinking |
|
Data Activity |
|
Orange |
|
100Mbps connection |
On |
|
Link |
|
Green |
|
1Gbps connection |
|
|
|
|
|
|
|
** If you use a 2-channel speaker, please connect the speaker’s plug into “Front Speaker Jack”. See the table below for connection details in accordance with the type of speaker you use.
Audio Output |
Front Speaker |
Rear Speaker |
Central / Bass |
Line In |
Channels |
(No. 7) |
(No. 5) |
(No. 4) |
(No. 6) |
2 |
V |
-- |
-- |
-- |
4 |
V |
V |
-- |
-- |
6 |
V |
V |
V |
-- |
8 |
V |
V |
V |
V |
English
8
J5040-ITX
J4125-ITX
Chapter 2 Installation
This is a Mini-ITX form factor motherboard. Before you install the motherboard, study the configuration of your chassis to ensure that the motherboard fits into it.
Pre-installation Precautions
Take note of the following precautions before you install motherboard components or change any motherboard settings.
•Make sure to unplug the power cord before installing or removing the motherboard. Failure to do so may cause physical injuries to you and damages to motherboard components.
•In order to avoid damage from static electricity to the motherboard’s components, NEVER place your motherboard directly on a carpet. Also remember to use a grounded wrist strap or touch a safety grounded object before you handle the components.
•Hold components by the edges and do not touch the ICs.
•Whenever you uninstall any components, place them on a grounded anti-static pad or in the bag that comes with the components.
•When placing screws to secure the motherboard to the chassis, please do not overtighten the screws! Doing so may damage the motherboard.
English
9
2.1 Installation of Memory Modules (SO-DIMM)
This motherboard provides two 260-pin DDR4 (Double Data Rate 4) SO-DIMM slots, and supports Dual Channel Memory Technology.
1. It is not allowed to install a DDR, DDR2 or DDR3 memory module into a DDR4 slot; otherwise, this motherboard and SO-DIMM may be damaged.
2.The SO-DIMM only fits in one correct orientation. It will cause permanent damage to the motherboard and the SO-DIMM if you force the SO-DIMM into the slot at incorrect orientation.
Supported DDR4 Non ECC SODIMM
Raw Card
A(1Rx8)
B(2Rx8)
C(1Rx16)
Dual Channel Memory Configuration
DDR4_A1 |
Populated |
|
|
DDR4_B1 |
Populated |
English
10
J5040-ITX
J4125-ITX
1
2
3
English
11
Loading...