ASRock H110M-DVS R2.0 Service Manual

Version 1.0

Published March 2016

Copyright©2016 ASRock INC. All rights reserved.

Copyright Notice:

No part of this documentation may be reproduced, transcribed, transmitted, or translated in any language, in any form or by any means, except duplication of documentation by the purchaser for backup purpose, without written consent of ASRock Inc.

Products and corporate names appearing in this documentation may or may not be registered trademarks or copyrights of their respective companies, and are used only for identification or explanation and to the owners’ benefit, without intent to

infringe.

Disclaimer:

Specifications and information contained in this documentation are furnished for informational use only and subject to change without notice, and should not be constructed as a commitment by ASRock. ASRock assumes no responsibility for any errors or omissions that may appear in this documentation.

With respect to the contents of this documentation, ASRock does not provide warranty of any kind, either expressed or implied, including but not limited to the implied warranties or conditions of merchantability or fitness for a particular purpose.

In no event shall ASRock, its directors, officers, employees, or agents be liable for any indirect, special, incidental, or consequential damages (including damages for loss of profits, loss of business, loss of data, interruption of business and the like), even if ASRock has been advised of the possibility of such damages arising from any defect or error in the documentation or product.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1)this device may not cause harmful interference, and

(2)this device must accept any interference received, including interference that may cause undesired operation.

CALIFORNIA, USA ONLY

The Lithium battery adopted on this motherboard contains Perchlorate, a toxic substance controlled in Perchlorate Best Management Practices (BMP) regulations passed by the California Legislature. When you discard the Lithium battery in California, USA, please follow the related regulations in advance.

“Perchlorate Material-special handling may apply, see www.dtsc.ca.gov/hazardouswaste/ perchlorate”

ASRock Website: http://www.asrock.com

AUSTRALIA ONLY

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage caused by our goods. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. If you require assistance please call ASRock Tel : [phone] ext.123 (Standard International call charges apply)

Contents

Chapter 1 Introduction		1
1.1	Package Contents	1
1.2	Specifications	2
1.3	Motherboard Layout	6
1.4	I/O Panel	8

Chapter 2 Installation		10
2.1	Installing the CPU	11
2.2	Installing the CPU Fan and Heatsink	14
2.3	Installing Memory Modules (DIMM)	15
2.4	Expansion Slots (PCI Express Slots)	17
2.5	Onboard Headers and Connectors	18

Chapter 3 Software and Utilities Operation		22
3.1	Installing Drivers	22
3.2	ASRock Live Update & APP Shop	23
3.2.1	UI Overview	23
3.2.2	Apps	24
3.2.3	BIOS & Drivers	27
3.2.4	Setting	28
3.3	Enabling USB Ports for Windows® 7 Installation	29

Chapter 4 UEFI SETUP UTILITY		32
4.1	Introduction	32
4.2	EZ Mode	33

4.3	Advanced Mode	34
4.3.1	UEFI Menu Bar	34
4.3.2	Navigation Keys	35
4.4	Main Screen	36
4.5	OC Tweaker Screen	37
4.6	Advanced Screen	45
4.6.1	CPU Configuration	46
4.6.2	Chipset Configuration	48
4.6.3	Storage Configuration	50
4.6.4	Super IO Configuration	51
4.6.5	ACPI Configuration	52
4.6.6	USB Configuration	54
4.6.7	Trusted Computing	55
4.7	Tools	56
4.8	Hardware Health Event Monitoring Screen	59
4.9	Security Screen	61
4.10	Boot Screen	62
4.11	Exit Screen	65

H110M-DVS R2.0

Chapter 1 Introduction

Thank you for purchasing ASRock H110M-DVS R2.0 motherboard, a reliable motherboard produced under ASRock’s consistently stringent quality control. It delivers excellent performance with robust design conforming to ASRock’s commitment to quality and endurance.

In this documentation, Chapter 1 and 2 contains the introduction of the motherboard and step-by-step installation guides. Chapter 3 contains the operation guide of the software and utilities. Chapter 4 contains the configuration guide of the BIOS setup.

Because the motherboard specifications and the BIOS software might be updated, the content of this documentation will be subject to change without notice. In case any modifications of this documentation occur, the updated version will be available on ASRock’s website without further notice. If you require technical support related to this motherboard, please visit our website for specific information about the model you are using. You may find the latest VGA cards and CPU support list on ASRock’s website as well. ASRock website http://www.asrock.com.

1.1 Package Contents

•ASRock H110M-DVS R2.0 Motherboard (Micro ATX Form Factor)

•ASRock H110M-DVS R2.0 Quick Installation Guide

•ASRock H110M-DVS R2.0 Support CD

•2 x Serial ATA (SATA) Data Cables (Optional)

•1 x I/O Panel Shield

English

1

English

1.2 Specifications

Platform	•	Micro ATX Form Factor
	•	Solid Capacitor design
CPU	•	Supports 6th Generation Intel® CoreTM i7/i5/i3/Pentium®/
		Celeron® Processors (Socket 1151)
	• Supports CPU up to 91W
	•	Digi Power design
	• 5 Power Phase design
	• Supports Intel® Turbo Boost 2.0 Technology
Chipset	•	Intel® H110
Memory	•	Dual Channel DDR4 Memory Technology
	• 2 x DDR4 DIMM Slots
	• Supports DDR4 2133 non-ECC, un-buffered memory
	• Supports ECC UDIMM memory modules (operate in non-
		ECC mode)
	• Max. capacity of system memory: 32GB
	• Supports Intel® Extreme Memory Profile (XMP) 2.0
Expansion	•	1 x PCI Express 3.0 x16 Slot (PCIE1: x16 mode)*
Slot	* Supports NVMe SSD as boot disks
	• 2 x PCI Express 2.0 x1 Slots
Graphics	•	Intel® HD Graphics Built-in Visuals and the VGA outputs
		can be supported only with processors which are GPU
		integrated.

• Supports Intel® HD Graphics Built-in Visuals : Intel® Quick Sync Video with AVC, MVC (S3D) and MPEG-2 Full

HW Encode1, Intel® InTruTM 3D, Intel® Clear Video HD Technology, Intel® InsiderTM, Intel® HD Graphics 510/530

• Pixel Shader 5.0, DirectX 12

• Max. shared memory 1024MB

* The size of maximum shared memory may vary from different operating systems.

2

H110M-DVS R2.0

•Dual graphics output: Support DVI-D and D-Sub ports by independent display controllers

•Supports DVI-D with max. resolution up to 1920x1200 @ 60Hz

•Supports D-Sub with max. resolution up to 1920x1200 @ 60Hz

•Supports Accelerated Media Codecs: HEVC, VP8, VP9

•Supports HDCP with DVI-D Port

•Supports Full HD 1080p Blu-ray (BD) playback with DVI-D Port

Audio	•	7.1 CH HD Audio (Realtek ALC887 Audio Codec)
	* To configure 7.1 CH HD Audio, it is required to use an HD
	front panel audio module and enable the multi-channel audio
	feature through the audio driver.
	• Supports Surge Protection (ASRock Full Spike Protection)
	•	ELNA Audio Caps
LAN	•	PCIE x1 Gigabit LAN 10/100/1000 Mb/s
	•	Realtek RTL8111GR/RTL8111C
	• Supports Wake-On-LAN
	• Supports Lightning/ESD Protection (ASRock Full Spike
		Protection)
	• Supports LAN Cable Detection
	•	Supports PXE
Rear Panel	•	1 x PS/2 Mouse/Keyboard Port
I/O	•	1 x D-Sub Port
	• 1 x DVI-D Port
	• 4 x USB 2.0 Ports (Supports ESD Protection (ASRock Full
		Spike Protection))*

• 2 x USB 3.0 Ports (Supports ESD Protection (ASRock Full Spike Protection))*

* ACPI wake-up function is supported on the rear USB ports only.

• 1 x RJ-45 LAN Port with LED (ACT/LINK LED and SPEED LED)

• HD Audio Jacks: Line in / Front Speaker / Microphone

English

3

Storage	•	4 x SATA3 6.0 Gb/s Connectors, support NCQ, AHCI and
		Hot Plug
Connector	•	1 x Print Port Header
	• 1 x COM Port Header
	• 1 x TPM Header
	• 1 x Chassis Intrusion and Speaker Header
	• 1 x CPU Fan Connector (4-pin)
	• 2 x Chassis Fan Connectors (4-pin)
	* The CPU Fan Connector supports the CPU fan of maximum
	1A (12W) fan power.
	• 1 x 24 pin ATX Power Connector
	• 1 x 8 pin 12V Power Connector
	• 1 x Front Panel Audio Connector
	• 2 x USB 2.0 Headers (Support 4 USB 2.0 ports) (Supports
		ESD Protection (ASRock Full Spike Protection))
	• 1 x USB 3.0 Header (Supports 2 USB 3.0 ports) (Supports
		ESD Protection (ASRock Full Spike Protection))
	* USB_11_12 is shared with USB_9_10.
BIOS	•	AMI UEFI Legal BIOS with multilingual GUI support
Feature	•	ACPI 5.0 Compliant wake up events
	•	SMBIOS 2.7 Support
	• CPU, DRAM, PCH 1.0V, VCCIO Voltage Multi-adjustment
Hardware	•	CPU/Chassis temperature sensing
Monitor	•	CPU/Chassis Fan Tachometer
	• CPU/Chassis Quiet Fan (Auto adjust chassis fan speed by
		CPU temperature)
	• CPU/Chassis Fan multi-speed control
	•	CASE OPEN detection
	• Voltage monitoring: +12V, +5V, +3.3V, CPU Vcore, DRAM,
		VPPM, PCH 1.0V, VCCIO

English

4

		H110M-DVS R2.0
OS	• Microsoft® Windows® 10 64-bit / 8.1 64-bit / 7 32-bit / 7 64-
	bit
	* To install Windows® 7 OS, a modified installation disk with
	xHCI drivers packed into the ISO file is required. Please refer to
	page 29 for more detailed instructions.
	* For the updated Windows® 10 driver, please visit ASRock’s
	website for details: http://www.asrock.com
Certifica-	• FCC, CE, WHQL
tions

* For detailed product information, please visit our website: http://www.asrock.com

Please realize that there is a certain risk involved with overclocking, including adjusting the setting in the BIOS, applying Untied Overclocking Technology, or using third-party overclocking tools. Overclocking may affect your system’s stability, or even cause damage to the components and devices of your system. It should be done at your own risk and expense. We are not responsible for possible damage caused by overclocking.

English

5

1.3 Motherboard Layout

e/Mous Keyboard PS2 2USBB: 1USBT:	USB 2.0						PCI Express 3.0
							CPU_FAN1
				ATX12V1
DVI1
VGA1							(64bit,288-pinmodule)	(64bit,288-pinmodule)	ATXPWR1
							A1	B1
USB 3.0							DDR4	DDR4
T: USB3
B: USB4
USB 2.0							Front USB 3.0		12
						CMOS			11
		Top:		CHA_FAN1
T: USB5						Battery			USB
		RJ-45
B: USB6
									1
MI Bottom: FRON Center: CI N T		LINE Top: IN	RoHS		H110M-DVS				USB 9 10
									1
					PCIE1				CHA FAN2
				PCIE2			Intel	SATA3 0	SATA3 1
							H110	SATA3 2	SATA3 3
		HD_AUDIO1		PCIE3
						BIOS
	1
						ROM
								PANEL1	CLRMOS1
		COM1		LPT1				PLED PWRBTN
					USB_7_8	SPK_CI1	TPMS1
							1
		1	1			1		1
					1
								HDLED RESET

English

6

H110M-DVS R2.0

No. Description

1ATX 12V Power Connector (ATX12V1)

2CPU Fan Connector (CPU_FAN1)

32 x 288-pin DDR4 DIMM Slots (DDR4_A1, DDR4_B1)

4ATX Power Connector (ATXPWR1)

5USB 3.0 Header (USB_11_12)

6USB 2.0 Header (USB_9_10)

7Chassis Fan Connector (CHA_FAN2)

8SATA3 Connector (SATA3_0)

9SATA3 Connector (SATA3_1)

10SATA3 Connector (SATA3_2)

11SATA3 Connector (SATA3_3)

12System Panel Header (PANEL1)

13TPM Header (TPMS1)

14Chassis Intrusion and Speaker Header (SPK_CI1)

15USB 2.0 Header (USB_7_8)

16Print Port Header (LPT1)

17COM Port Header (COM1)

18Front Panel Audio Header (HD_AUDIO1)

19Chassis Fan Connector (CHA_FAN1)

English

7

1.4 I/O Panel

																						3
		1											2									4

10 9 8 7 6 5

No.	Description	No.	Description
1	USB 2.0 Ports (USB_12)***	6	USB 2.0 Ports (USB_56)***
2	LAN RJ-45 Port*	7	USB 3.0 Ports (USB_34)***
3	Line In (Light Blue)**	8	D-Sub Port
4	Front Speaker (Lime)**	9	DVI-D Port
5	Microphone (Pink)**	10	PS/2 Keyboard/Mouse Port

*There are two LEDs on the LAN port. Please refer to the table below for the LAN port LED indications.

ACT/LINK LED SPEED LED

LAN Port
Activity / Link LED				Speed LED
Status		Description		Status		Description
Off		No Link		Off		10Mbps connection
Blinking		Data Activity		Orange		100Mbps connection
On		Link		Green		1Gbps connection

English

8

H110M-DVS R2.0

** To configure 7.1 CH HD Audio, it is required to use an HD front panel audio module and enable the multichannel audio feature through the audio driver.

Please set Speaker Configuration to “7.1 Speaker”in the Realtek HD Audio Manager.

Function of the Audio Ports in 7.1-channel Configuration:

Port		Function
Light Blue (Rear panel)		Rear Speaker Out
Lime (Rear panel)		Front Speaker Out
Pink (Rear panel)		Central /Subwoofer Speaker Out
Lime (Front panel)		Side Speaker Out

*** ACPI wake-up function is supported on the rear USB ports only.

English

9

Chapter 2 Installation

This is a Micro ATX form factor motherboard. Before you install the motherboard, study the configuration of your chassis to ensure that the motherboard fits into it.

Pre-installation Precautions

Take note of the following precautions before you install motherboard components or change any motherboard settings.

•Make sure to unplug the power cord before installing or removing the motherboard components. Failure to do so may cause physical injuries and damages to motherboard components.

•In order to avoid damage from static electricity to the motherboard’s components, NEVER place your motherboard directly on a carpet. Also remember to use a grounded wrist strap or touch a safety grounded object before you handle the components.

•Hold components by the edges and do not touch the ICs.

•Whenever you uninstall any components, place them on a grounded anti-static pad or in the bag that comes with the components.

•When placing screws to secure the motherboard to the chassis, please do not overtighten the screws! Doing so may damage the motherboard.

English

10

H110M-DVS R2.0

2.1Installing the CPU

1.Before you insert the 1151-Pin CPU into the socket, please check if the PnP cap is on the socket, if the CPU surface is unclean, or if there are any bent pins in the socket. Do not force to insert the CPU into the socket if above situation is found. Otherwise, the CPU will be seriously damaged.

2.Unplug all power cables before installing the CPU.

1

A

B

2

English

11

3

4

5

English

12

H110M-DVS R2.0

Please save and replace the cover if the processor is removed. The cover must be placed if you wish to return the motherboard for after service.

English

13

2.2 Installing the CPU Fan and Heatsink

1

2

N _FA PU C

English

14

H110M-DVS R2.0

2.3 Installing Memory Modules (DIMM)

This motherboard provides two 288-pin DDR4 (Double Data Rate 4) DIMM slots, and supports Dual Channel Memory Technology.

1.For dual channel configuration, you always need to install identical (the same brand, speed, size and chip-type) DDR4 DIMM pairs.

2.It is unable to activate Dual Channel Memory Technology with only one memory module installed.

3.It is not allowed to install a DDR, DDR2 or DDR3 memory module into a DDR4 slot; otherwise, this motherboard and DIMM may be damaged.

The DIMM only fits in one correct orientation. It will cause permanent damage to the motherboard and the DIMM if you force the DIMM into the slot at incorrect orientation.

English

15

1

2

3

English

16

H110M-DVS R2.0

2.4 Expansion Slots (PCI Express Slots)

There are 3 PCI Express slots on the motherboard.

Before installing an expansion card, please make sure that the power supply is switched off or the power cord is unplugged. Please read the documentation of the expansion card and make necessary hardware settings for the card before you start the installation.

PCIe slots:

PCIE1 (PCIe 3.0 x16 slot) is used for PCI Express x16 lane width graphics cards. PCIE2 (PCIe 2.0 x1 slot) is used for PCI Express x1 lane width cards.

PCIE3 (PCIe 2.0 x1 slot) is used for PCI Express x1 lane width cards.

English

17