H110M-DGS
Version 1.0
Published October 2015
Copyright©2015 ASRock INC. All rights reserved.
Copyright Notice:
No part of this documentation may be reproduced, transcribed, transmitted, or translated in any language, in any form or by any means, except duplication of documentation by the purchaser for backup purpose, without written consent of ASRock Inc.
Products and corporate names appearing in this documentation may or may not be registered trademarks or copyrights of their respective companies, and are used only for identification or explanation and to the owners’ benefit, without intent to
infringe.
Disclaimer:
Specifications and information contained in this documentation are furnished for informational use only and subject to change without notice, and should not be constructed as a commitment by ASRock. ASRock assumes no responsibility for any errors or omissions that may appear in this documentation.
With respect to the contents of this documentation, ASRock does not provide warranty of any kind, either expressed or implied, including but not limited to the implied warranties or conditions of merchantability or fitness for a particular purpose.
In no event shall ASRock, its directors, officers, employees, or agents be liable for any indirect, special, incidental, or consequential damages (including damages for loss of profits, loss of business, loss of data, interruption of business and the like), even if ASRock has been advised of the possibility of such damages arising from any defect or error in the documentation or product.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1)this device may not cause harmful interference, and
(2)this device must accept any interference received, including interference that may cause undesired operation.
CALIFORNIA, USA ONLY
The Lithium battery adopted on this motherboard contains Perchlorate, a toxic substance controlled in Perchlorate Best Management Practices (BMP) regulations passed by the California Legislature. When you discard the Lithium battery in California, USA, please follow the related regulations in advance.
“Perchlorate Material-special handling may apply, see www.dtsc.ca.gov/hazardouswaste/ perchlorate”
ASRock Website: http://www.asrock.com
Contents
Chapter 1 Introduction |
1 |
|
1.1 |
Package Contents |
1 |
1.2 |
Specifications |
2 |
1.3 |
Motherboard Layout |
5 |
1.4 |
I/O Panel |
7 |
Chapter 2 Installation |
9 |
|
2.1 |
Installing the CPU |
10 |
2.2 |
Installing the CPU Fan and Heatsink |
13 |
2.3 |
Installing Memory Modules (DIMM) |
14 |
2.4 |
Expansion Slots (PCI Express Slots) |
16 |
2.5 |
Onboard Headers and Connectors |
17 |
Chapter 3 Software and Utilities Operation |
21 |
|
3.1 |
Installing Drivers |
21 |
3.2 |
ASRock Live Update & APP Shop |
22 |
3.2.1 |
UI Overview |
22 |
3.2.2 |
Apps |
23 |
3.2.3 |
BIOS & Drivers |
26 |
3.2.4 |
Setting |
27 |
3.3 |
Enabling USB Ports for Windows® 7 Installation |
28 |
Chapter 4 UEFI SETUP UTILITY |
31 |
|
4.1 |
Introduction |
31 |
4.2 |
EZ Mode |
32 |
4.3 |
Advanced Mode |
33 |
4.3.1 |
UEFI Menu Bar |
33 |
4.3.2 |
Navigation Keys |
34 |
4.4 |
Main Screen |
35 |
4.5 |
OC Tweaker Screen |
36 |
4.6 |
Advanced Screen |
44 |
4.6.1 |
CPU Configuration |
45 |
4.6.2 |
Chipset Configuration |
47 |
4.6.3 |
Storage Configuration |
49 |
4.6.4 |
ACPI Configuration |
50 |
4.6.5 |
USB Configuration |
52 |
4.6.6 |
Trusted Computing |
53 |
4.7 |
Tools |
54 |
4.8 |
Hardware Health Event Monitoring Screen |
57 |
4.9 |
Security Screen |
59 |
4.10 |
Boot Screen |
60 |
4.11 |
Exit Screen |
63 |
H110M-DGS
Chapter 1 Introduction
Thank you for purchasing ASRock H110M-DGS motherboard, a reliable motherboard produced under ASRock’s consistently stringent quality control. It delivers excellent performance with robust design conforming to ASRock’s commitment to quality and endurance.
In this documentation, Chapter 1 and 2 contains the introduction of the motherboard and step-by-step installation guides. Chapter 3 contains the operation guide of the software and utilities. Chapter 4 contains the configuration guide of the BIOS setup.
Because the motherboard specifications and the BIOS software might be updated, the content of this documentation will be subject to change without notice. In case any modifications of this documentation occur, the updated version will be available on ASRock’s website without further notice. If you require technical support related to this motherboard, please visit our website for specific information about the model you are using. You may find the latest VGA cards and CPU support list on ASRock’s website as well. ASRock website http://www.asrock.com.
1.1 Package Contents
•ASRock H110M-DGS Motherboard (Micro ATX Form Factor)
•ASRock H110M-DGS Quick Installation Guide
•ASRock H110M-DGS Support CD
•2 x Serial ATA (SATA) Data Cables (Optional)
•1 x I/O Panel Shield
English
1
English
1.2 Specifications
Platform |
• Micro ATX Form Factor |
|
• Solid Capacitor design |
CPU |
• Supports 6th Generation Intel® CoreTM i7/i5/i3/Pentium®/ |
|
Celeron® Processors (Socket 1151) |
|
• Supports CPU up to 95W |
|
• Supports Intel® Turbo Boost 2.0 Technology |
Chipset |
• Intel® H110 |
Memory |
• Dual Channel DDR4 Memory Technology |
|
• 2 x DDR4 DIMM Slots |
|
• Supports DDR4 2133 non-ECC, un-buffered memory |
|
• Max. capacity of system memory: 32GB |
|
• Supports Intel® Extreme Memory Profile (XMP) 2.0 |
Expansion |
• 1 x PCI Express 3.0 x16 Slot (PCIE2: x16 mode)* |
Slot |
* Supports NVMe SSD as boot disks |
|
• 1 x PCI Express 2.0 x1 Slot |
Graphics *Intel® HD Graphics Built-in Visuals and the VGA outputs can be supported only with processors which are GPU integrated.
•Supports Intel® HD Graphics Built-in Visuals : Intel® Quick Sync Video with AVC, MVC (S3D) and MPEG-2 Full
HW Encode1, Intel® InTruTM 3D, Intel® Clear Video HD Technology, Intel® InsiderTM, Intel® HD Graphics 510/530
•Pixel Shader 5.0, DirectX 12
•Max. shared memory 1792MB
•Supports DVI-D with max. resolution up to 1920x1200 @ 60Hz
•Supports Accelerated Media Codecs: HEVC, VP8, VP9
•Supports HDCP with DVI-D Port
•Supports Full HD 1080p Blu-ray (BD) playback with DVI-D Port
2
H110M-DGS
Audio |
• |
7.1 CH HD Audio (Realtek ALC887 Audio Codec) |
|
* To configure 7.1 CH HD Audio, it is required to use an HD |
|
|
front panel audio module and enable the multi-channel audio |
|
|
feature through the audio driver. |
|
|
• Supports Surge Protection (ASRock Full Spike Protection) |
|
|
• |
ELNA Audio Caps |
LAN |
• |
PCIE x1 Gigabit LAN 10/100/1000 Mb/s |
|
• |
Realtek RTL8111GR |
|
• Supports Wake-On-WAN |
|
|
• Supports Wake-On-LAN |
|
|
• Supports Lightning/ESD Protection (ASRock Full Spike |
|
|
|
Protection) |
|
• Supports LAN Cable Detection |
|
|
• Supports Energy Efficient Ethernet 802.3az |
|
|
• |
Supports PXE |
Rear Panel |
• |
1 x PS/2 Mouse Port |
I/O |
• |
1 x PS/2 Keyboard Port |
|
• 1 x DVI-D Port |
|
|
• 4 x USB 2.0 Ports (Supports ESD Protection (ASRock Full |
|
|
|
Spike Protection))* |
|
* ACPI wake-up function is supported on USB23 ports only. |
|
|
• 2 x USB 3.0 Ports (Supports ESD Protection (ASRock Full |
|
|
|
Spike Protection)) |
|
• 1 x RJ-45 LAN Port with LED (ACT/LINK LED and SPEED |
|
|
|
LED) |
|
• HD Audio Jacks: Line in / Front Speaker / Microphone |
|
Storage |
• |
4 x SATA3 6.0 Gb/s Connectors, support NCQ, AHCI and |
|
|
Hot Plug |
Connector |
• |
1 x TPM Header |
|
• 1 x Chassis Intrusion and Speaker Header |
|
|
• 1 x CPU Fan Connector (4-pin) (Smart Fan Speed Control) |
|
|
• 1 x Chassis Fan Connector (4-pin) (Smart Fan Speed Con- |
|
|
|
trol) |
|
• 1 x 24 pin ATX Power Connector |
|
|
• 1 x 8 pin 12V Power Connector |
|
|
• 1 x Front Panel Audio Connector |
|
English
3
English
• 1 x USB 2.0 Header (Supports 2 USB 2.0 ports) (Supports
|
|
ESD Protection (ASRock Full Spike Protection)) |
|
• 1 x USB 3.0 Header (Supports 2 USB 3.0 ports) (Supports |
|
|
|
ESD Protection (ASRock Full Spike Protection)) |
BIOS |
• |
AMI UEFI Legal BIOS with multilingual GUI support |
Feature |
• |
ACPI 5.0 Compliant wake up events |
|
• |
SMBIOS 2.7 Support |
|
• DRAM, PCH 1.0V Voltage Multi-adjustment |
|
Hardware |
• |
CPU/Chassis temperature sensing |
Monitor |
• |
CPU/Chassis Fan Tachometer |
|
• CPU/Chassis Quiet Fan (Auto adjust chassis fan speed by |
|
|
|
CPU temperature) |
|
• CPU/Chassis Fan multi-speed control |
|
|
• |
CASE OPEN detection |
|
• Voltage monitoring: +12V, +5V, +3.3V, CPU Vcore |
|
OS |
• |
Microsoft® Windows® 10 64-bit / 8.1 64-bit / 7 32-bit / 7 64- |
|
|
bit |
|
* To install Windows® 7 OS, a modified installation disk with |
|
|
xHCI drivers packed into the ISO file is required. Please refer to |
|
|
page 28 for more detailed instructions. |
|
|
* For the updated Windows® 10 driver, please visit ASRock’s |
|
|
website for details: http://www.asrock.com |
|
Certifica- |
• |
FCC, CE, WHQL |
tions |
|
|
* For detailed product information, please visit our website: http://www.asrock.com
Please realize that there is a certain risk involved with overclocking, including adjusting the setting in the BIOS, applying Untied Overclocking Technology, or using third-party overclocking tools. Overclocking may affect your system’s stability, or even cause damage to the components and devices of your system. It should be done at your own risk and expense. We are not responsible for possible damage caused by overclocking.
4
|
|
|
|
|
|
|
|
|
|
H110M-DGS |
|
1.3 Motherboard Layout |
|
|
|
|
|
|
|
|
|||
|
|
|
1 |
2 |
|
|
3 |
|
|
|
|
Keyboard P 2S |
Mous SP 2 e |
|
|
|
|
|
|
|
|
4 |
|
|
|
|
|
CPU_FAN1 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
CHA_FAN1 |
|
|
|
|
ATX12V1 |
|
|
|
|
|
|
|
|
|
DVI1 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
module) |
module) |
|
ATXPWR1 |
|
B: USB1 |
RJ-45 |
|
|
|
|
(64A1DDR4bit,288-pin |
4(6B1DDR4bit,288-pin |
|
5 |
||
USB 3.0 |
|
|
|
|
|
|
|
|
|
|
|
T: USB1 |
|
|
|
|
|
|
|
|
|
|
|
B: USB2 |
|
|
|
|
|
|
|
|
|
|
|
USB 2.0 |
Top: |
|
|
|
|
|
|
|
|
|
|
T: USB0 |
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
||
USB 2.0 |
|
RoHS |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
T: USB2 |
|
|
|
|
|
|
|
|
|
|
|
B: USB3 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Intel |
|
CMOS |
|
|
|
34 |
|
|
|
|
|
Battery |
|
|
|
|
||||
MI Bottom: CIN |
FRON Center: T |
LINE Top: IN |
|
|
|
|
|
|
|
USB3 |
6 |
H110 |
|
|
|
|
|
|
|
||||
|
|
HD_AUDIO1 |
SATA33 |
SATA32 |
SATA31 |
SATA30 |
|
|
|
|
|
|
|
1 |
|
|
|
|
|
||||
16 |
|
|
|
|
|
1 |
|
||||
|
|
|
|
|
|
|
|
|
|
7 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
PANEL1 |
1 |
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
PCIE1 |
|
|
|
SPK_CI1 |
PWRBTN |
RESET |
USB_4_5 |
8 |
|
|
|
|
|
|
1 |
1 |
||||
|
|
|
|
|
|
ROM |
|
PLED |
HDLED |
|
|
|
|
|
|
|
|
BIOS |
|
|
|
|
|
|
|
|
|
H110M-DGS |
|
|
|
|
|
TPMS1 |
|
|
|
|
|
|
|
|
|
|
|
|
9 |
|
|
Audio |
|
PCIE2 |
|
|
|
|
|
|
|
|
|
CODEC |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
CLRMOS1 |
|
|
|
|
|
15 |
14 |
13 |
12 |
11 |
|
10 |
|
English
5
No. Description
1ATX 12V Power Connector (ATX12V1)
2CPU Fan Connector (CPU_FAN1)
32 x 288-pin DDR4 DIMM Slots (DDR4_A1, DDR4_B1)
4Chassis Fan Connector (CHA_FAN1)
5ATX Power Connector (ATXPWR1)
6USB 3.0 Header (USB3_3_4)
7SATA3 Connector (SATA3_0)
8TPM Header (TPMS1)
9USB 2.0 Header (USB_4_5)
10Clear CMOS Pad (CLRMOS1)
11System Panel Header (PANEL1)
12Chassis Intrusion and Speaker Header (SPK_CI1)
13SATA3 Connector (SATA3_1)
14SATA3 Connector (SATA3_2)
15SATA3 Connector (SATA3_3)
16Front Panel Audio Header (HD_AUDIO1)
English
6
H110M-DGS
1.4 I/O Panel
1 |
2 |
3 |
4
10 9 8 7 6 5
No. |
Description |
No. |
Description |
1 |
PS/2 Mouse Port (Green)*** |
6 |
USB 2.0 Ports (USB23)*** |
2 |
LAN RJ-45 Port* |
7 |
USB 2.0 Ports (USB01) |
3 |
Line In (Light Blue)** |
8 |
USB 3.0 Ports (USB3_12) |
4 |
Front Speaker (Lime)** |
9 |
DVI-D Port |
5 |
Microphone (Pink)** |
10 |
PS/2 Keyboard Port (Purple)*** |
|
|
|
|
* There are two LEDs on each LAN port. Please refer to the table below for the LAN port LED indications
ACT/LINK LED
SPEED LED
LAN Port |
|
|
|
|
Activity / Link LED |
|
Speed LED |
|
|
|
|
|||
Status |
Description |
|
Status |
Description |
Off |
No Link |
|
Off |
10Mbps connection |
Blinking |
Data Activity |
|
Orange |
100Mbps connection |
On |
Link |
|
Green |
1Gbps connection |
English
7
** To configure 7.1 CH HD Audio, it is required to use an HD front panel audio module and enable the multichannel audio feature through the audio driver.
Please set Speaker Configuration to “7.1 Speaker”in the Realtek HD Audio Manager.
Function of the Audio Ports in 7.1-channel Configuration:
Port |
|
Function |
Light Blue (Rear panel) |
|
Rear Speaker Out |
|
||
Lime (Rear panel) |
|
Front Speaker Out |
Pink (Rear panel) |
|
Central /Subwoofer Speaker Out |
Lime (Front panel) |
|
Side Speaker Out |
*** Supports ACPI wake-up function
English
8
H110M-DGS
Chapter 2 Installation
This is a Micro ATX form factor motherboard. Before you install the motherboard, study the configuration of your chassis to ensure that the motherboard fits into it.
Pre-installation Precautions
Take note of the following precautions before you install motherboard components or change any motherboard settings.
•Make sure to unplug the power cord before installing or removing the motherboard components. Failure to do so may cause physical injuries and damages to motherboard components.
•In order to avoid damage from static electricity to the motherboard’s components, NEVER place your motherboard directly on a carpet. Also remember to use a grounded wrist strap or touch a safety grounded object before you handle the components.
•Hold components by the edges and do not touch the ICs.
•Whenever you uninstall any components, place them on a grounded anti-static pad or in the bag that comes with the components.
•When placing screws to secure the motherboard to the chassis, please do not overtighten the screws! Doing so may damage the motherboard.
English
9
2.1Installing the CPU
1.Before you insert the 1151-Pin CPU into the socket, please check if the PnP cap is on the socket, if the CPU surface is unclean, or if there are any bent pins in the socket. Do not force to insert the CPU into the socket if above situation is found. Otherwise, the CPU will be seriously damaged.
2.Unplug all power cables before installing the CPU.
1
A
B
2
English
10
H110M-DGS
3 |
4 |
5
English
11
Please save and replace the cover if the processor is removed. The cover must be placed if you wish to return the motherboard for after service.
English
12
H110M-DGS
2.2 Installing the CPU Fan and Heatsink
1 |
2 |
N _FA PU C
English
13
2.3 Installing Memory Modules (DIMM)
This motherboard provides two 288-pin DDR4 (Double Data Rate 4) DIMM slots, and supports Dual Channel Memory Technology.
1.For dual channel configuration, you always need to install identical (the same brand, speed, size and chip-type) DDR4 DIMM pairs.
2.It is unable to activate Dual Channel Memory Technology with only one memory module installed.
3.It is not allowed to install a DDR, DDR2 or DDR3 memory module into a DDR4 slot; otherwise, this motherboard and DIMM may be damaged..
The DIMM only fits in one correct orientation. It will cause permanent damage to the motherboard and the DIMM if you force the DIMM into the slot at incorrect orientation.
English
14
H110M-DGS
1
2
3
English
15
2.4 Expansion Slots (PCI Express Slots)
There are 2 PCI Express slots on the motherboard.
Before installing an expansion card, please make sure that the power supply is switched off or the power cord is unplugged. Please read the documentation of the expansion card and make necessary hardware settings for the card before you start the installation.
PCIe slots:
PCIE1 (PCIe 2.0 x1 slot) is used for PCI Express x1 lane width cards
PCIE2 (PCIe 3.0 x16 slot) is used for PCI Express x16 lane width graphics cards.
English
16
H110M-DGS
2.5 Onboard Headers and Connectors
Onboard headers and connectors are NOT jumpers. Do NOT place jumper caps over these headers and connectors. Placing jumper caps over the headers and connectors will cause permanent damage to the motherboard.
System Panel Header
(9-pin PANEL1)
(see p.5, No. 11)
|
GND |
GND |
RESET# |
PWRBTN# |
GND |
PLED- |
HDLED- |
PLED+ |
HDLED+ |
|
1 |
Connect the power switch, reset switch and system status indicator on the chassis to this header according to the pin assignments below. Note the positive and negative pins before connecting the cables.
PWRBTN (Power Switch):
Connect to the power switch on the chassis front panel. You may configure the way to turn off your system using the power switch.
RESET (Reset Switch):
Connect to the reset switch on the chassis front panel. Press the reset switch to restart the computer if the computer freezes and fails to perform a normal restart.
PLED (System Power LED):
Connect to the power status indicator on the chassis front panel. The LED is on when the system is operating. The LED keeps blinking when the system is in S1/S3 sleep state. The LED is off when the system is in S4 sleep state or powered off (S5).
HDLED (Hard Drive Activity LED):
Connect to the hard drive activity LED on the chassis front panel. The LED is on when the hard drive is reading or writing data.
The front panel design may differ by chassis. A front panel module mainly consists of power switch, reset switch, power LED, hard drive activity LED, speaker and etc. When connecting your chassis front panel module to this header, make sure the wire assignments and the pin assignments are matched correctly.
English
17
Loading...