Version 1.0
Published January 2019
Copyright©2019 ASRock INC. All rights reserved.
Copyright Notice:
No part of this documentation may be reproduced, transcribed, transmitted, or translated in any language, in any form or by any means, except duplication of documentation by the purchaser for backup purpose, without written consent of ASRock Inc.
Products and corporate names appearing in this documentation may or may not be registered trademarks or copyrights of their respective companies, and are used only for identification or explanation and to the owners’ benefit, without intent to
infringe.
Disclaimer:
Specifications and information contained in this documentation are furnished for informational use only and subject to change without notice, and should not be constructed as a commitment by ASRock. ASRock assumes no responsibility for any errors or omissions that may appear in this documentation.
With respect to the contents of this documentation, ASRock does not provide warranty of any kind, either expressed or implied, including but not limited to the implied warranties or conditions of merchantability or fitness for a particular purpose.
In no event shall ASRock, its directors, officers, employees, or agents be liable for any indirect, special, incidental, or consequential damages (including damages for loss of profits, loss of business, loss of data, interruption of business and the like), even if ASRock has been advised of the possibility of such damages arising from any defect or error in the documentation or product.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1)this device may not cause harmful interference, and
(2)this device must accept any interference received, including interference that may cause undesired operation.
CALIFORNIA, USA ONLY
The Lithium battery adopted on this motherboard contains Perchlorate, a toxic substance controlled in Perchlorate Best Management Practices (BMP) regulations passed by the California Legislature. When you discard the Lithium battery in California, USA, please follow the related regulations in advance.
“Perchlorate Material-special handling may apply, see www.dtsc.ca.gov/hazardouswaste/ perchlorate”
ASRock Website: http://www.asrock.com
AUSTRALIA ONLY
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage caused by our goods. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. If you require assistance please call ASRock Tel : +886-2-28965588 ext.123 (Standard International call charges apply)
The terms HDMI® and HDMI High-Definition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.
Contents
Chapter 1 Introduction |
1 |
|
1.1 |
Package Contents |
1 |
1.2 |
Specifications |
2 |
1.3 |
Motherboard Layout |
7 |
1.4 |
I/O Panel |
9 |
Chapter 2 Installation |
10 |
|
2.1 |
Installing the CPU |
11 |
2.2 |
Installing the CPU Fan and Heatsink |
13 |
2.3 |
Installing Memory Modules (DIMM) |
22 |
2.4 |
Expansion Slots (PCI Express Slots) |
25 |
2.5 |
Jumpers Setup |
26 |
2.6 |
Onboard Headers and Connectors |
27 |
2.7 |
CrossFireXTM and Quad CrossFireXTM Operation Guide |
32 |
2.7.1 |
Installing Two CrossFireXTM-Ready Graphics Cards |
32 |
2.7.2 |
Driver Installation and Setup |
34 |
2.8 |
M.2_SSD (NGFF) Module Installation Guide (M2_1) |
35 |
2.9 |
M.2_SSD (NGFF) Module Installation Guide (M2_2) |
38 |
Chapter 3 Software and Utilities Operation |
41 |
|
3.1 |
Installing Drivers |
41 |
3.2 |
A-Tuning |
42 |
3.2.1 |
Installing A-Tuning |
42 |
3.2.2 |
Using A-Tuning |
42 |
3.3 |
ASRock Live Update & APP Shop |
45 |
3.3.1 |
UI Overview |
45 |
3.3.2 |
Apps |
46 |
3.3.3 |
BIOS & Drivers |
49 |
3.3.4 |
Setting |
50 |
3.4 |
ASRock RGB LED |
51 |
Chapter 4 UEFI SETUP UTILITY |
54 |
|
4.1 |
Introduction |
54 |
4.1.1 |
UEFI Menu Bar |
54 |
4.1.2 |
Navigation Keys |
55 |
4.2 |
Main Screen |
56 |
4.3 |
OC Tweaker Screen |
58 |
4.4 |
Advanced Screen |
59 |
4.4.1 |
CPU Configuration |
60 |
4.4.2 |
North Bridge Configuration |
61 |
4.4.3 |
South Bridge Configuration |
62 |
4.4.4 |
Storage Configuration |
63 |
4.4.5 |
Super IO Configuration |
64 |
4.4.6 |
ACPI Configuration |
65 |
4.4.7 |
Trusted Computing |
66 |
4.4.8 |
AMD CBS |
67 |
4.4.9 |
AMD PBS |
75 |
4.5 |
Tools |
76 |
4.6 |
Hardware Health Event Monitoring Screen |
78 |
4.7 |
Security Screen |
79 |
4.8 |
Boot Screen |
80 |
4.9 |
Exit Screen |
82 |
B450M Pro4-F
Chapter 1 Introduction
Thank you for purchasing ASRock B450M Pro4-F motherboard, a reliable motherboard produced under ASRock’s consistently stringent quality control. It delivers excellent performance with robust design conforming to ASRock’s commitment to quality and endurance.
In this manual, Chapter 1 and 2 contains the introduction of the motherboard and step-by-step installation guides. Chapter 3 contains the operation guide of the
software and utilities. Chapter 4 contains the configuration guide of the BIOS setup.
Because the motherboard specifications and the BIOS software might be updated, the content of this manual will be subject to change without notice. In case any modifications of this manual occur, the updated version will be available on ASRock’s website without further notice. If you require technical support related to this motherboard, please visit our website for specific information about the model you are using. You may find the latest VGA cards and CPU support list on ASRock’s website as well. ASRock website http://www.asrock.com.
1.1 Package Contents
•ASRock B450M Pro4-F Motherboard (Micro ATX Form Factor)
•ASRock B450M Pro4-F Quick Installation Guide
•ASRock B450M Pro4-F Support CD
•1 x I/O Panel Shield
•2 x Serial ATA (SATA) Data Cables (Optional)
•2 x Screws for M.2 Sockets (Optional)
English
1
1.2 Specifications
Platform |
• |
Micro ATX Form Factor |
|
• |
Solid Capacitor design |
CPU |
• |
AMD AM4 Socket |
|
• |
Digi Power design |
|
• 9 Power Phase design |
|
|
• Supports 105W Water Cooling (Pinnacle Ridge); Supports |
|
|
|
95W Water Cooling (Summit Ridge); Supports 65W Water |
|
|
Cooling (Raven Ridge) |
Chipset |
• |
AMD Promontory B450 |
Memory |
• |
Dual Channel DDR4 Memory Technology |
•4 x DDR4 DIMM Slots
•AMD Ryzen series CPUs (Pinnacle Ridge) support DDR4 3200+(OC)/2933(OC)/2667/2400/2133 ECC & non-ECC, unbuffered memory*
•AMD Ryzen series CPUs (Summit Ridge) support DDR4 3200+(OC)/2933(OC)/2667/2400/2133 ECC & non-ECC, unbuffered memory*
•AMD Ryzen series CPUs (Raven Ridge) support DDR4 3200+(OC)/2933/2667/2400/2133 non-ECC, un-buffered memory*
*For Ryzen Series CPUs (Raven Ridge), ECC is only supported with PRO CPUs.
*Please refer to Memory Support List on ASRock’s website for more information. (http://www.asrock.com/)
*Please refer to page 22 for the table for AMD non-XMP memory frequency support. For more details, please refer to the QVL on ASRock’s website.
•Max. capacity of system memory: 64GB
•15μ Gold Contact in DIMM Slots
English
2
B450M Pro4-F
Expansion |
AMD Ryzen series CPUs (Summit Ridge and Pinnacle Ridge) |
Slot |
• 1 x PCI Express 3.0 x16 Slot (PCIE2: x16 mode)* |
|
• 1 x PCI Express 2.0 x16 Slot (PCIE3: x4 mode) |
|
AMD Ryzen series CPUs (Raven Ridge) |
|
• 1 x PCI Express 3.0 x16 Slot (PCIE2: x8 mode)* |
|
• 1 x PCI Express 2.0 x16 Slot (PCIE3: x4 mode) |
|
AMD Athlon series CPUs |
|
• 1 x PCI Express 3.0 x16 Slot (PCIE2: x4 mode)* |
|
• 1 x PCI Express 2.0 x16 Slot (PCIE3: x4 mode) |
|
* Supports NVMe SSD as boot disks |
|
• 1 x PCI Express 2.0 x1 Slot |
|
• Supports AMD Quad CrossFireXTM and CrossFireXTM |
Graphics |
• Integrated AMD RadeonTM Vega Series Graphics in Ryzen |
|
Series APU* |
|
* Actual support may vary by CPU |
|
• DirectX 12, Pixel Shader 5.0 |
|
• Shared memory default 2GB. Max Shared memory supports |
|
up to 16GB. |
|
* The Max shared memory 16GB requires 32GB system memory |
|
installed. |
|
• Three graphics output options: D-Sub, DVI-D and HDMI |
|
• Supports Triple Monitor |
|
• Supports HDMI 1.4 with max. resolution up to 4K x 2K |
|
(4096x2160) @ 24Hz / (3840x2160) @ 30Hz |
|
• Supports DVI-D with max. resolution up to 1920x1200 @ |
|
60Hz |
|
• Supports D-Sub with max. resolution up to 1920x1200 @ |
|
60Hz |
|
• Supports Auto Lip Sync, Deep Color (12bpc), xvYCC and |
|
HBR (High Bit Rate Audio) with HDMI 1.4 Port (Compliant |
|
HDMI monitor is required) |
|
• Supports HDCP 1.4 with DVI-D and HDMI 1.4 Ports |
|
• Supports Full HD 1080p Blu-ray (BD) playback with DVI-D |
|
and HDMI 1.4 Ports |
English
3
English
Audio |
• |
7.1 CH HD Audio with Content Protection (Realtek ALC892 |
|
|
Audio Codec) |
|
• Premium Blu-ray Audio support |
|
|
• |
Supports Surge Protection |
|
• |
ELNA Audio Caps |
LAN |
• |
PCIE x1 Gigabit LAN 10/100/1000 Mb/s |
|
• |
Realtek RTL8111GR |
|
• Supports Wake-On-LAN |
|
|
• |
Supports Lightning/ESD Protection |
|
• Supports LAN Cable Detection |
|
|
• Supports Energy Efficient Ethernet 802.3az |
|
|
• |
Supports PXE |
Rear Panel |
• |
1 x PS/2 Mouse Port |
I/O |
• |
1 x PS/2 Keyboard Port |
|
• 1 x D-Sub Port |
|
|
• 1 x DVI-D Port |
|
|
• 1 x HDMI Port |
|
|
• 2 x USB 2.0 Ports (Supports ESD Protection) |
|
|
• 1 x USB 3.1 Gen1 Type-C Port (Supports ESD Protection) |
|
|
• 4 x USB 3.1 Gen1 Ports (Supports ESD Protection) |
|
|
• 1 x RJ-45 LAN Port with LED (ACT/LINK LED and SPEED |
|
|
|
LED) |
|
• HD Audio Jacks: Line in / Front Speaker / Microphone |
|
Storage |
• |
4 x SATA3 6.0 Gb/s Connectors, support RAID (RAID 0, |
|
|
RAID 1 and RAID 10), NCQ, AHCI and Hot Plug* |
*M2_2 and SATA3_3 share lanes. If either one of them is in use, the other one will be disabled.
•1 x Ultra M.2 Socket (M2_1), supports M Key type 2242/2260/2280 M.2 PCI Express module up to Gen3 x4 (32 Gb/s) (with Summit Ridge, Raven Ridge and Pinnacle Ridge) or Gen3 x2 (16 Gb/s) (with Athlon 2xxGE series APU)**
•1 x M.2 Socket (M2_2), supports M Key type 2230/2242/2260/2280 M.2 SATA3 6.0 Gb/s module**
**Supports NVMe SSD as boot disks (M2_1 only)
**Supports ASRock U.2 Kit
4
B450M Pro4-F
Connector • 1 x COM Port Header
•1 x TPM Header
•1 x Power LED and Speaker Header
•1 x RGB LED Header
*Supports in total up to 12V/3A, 36W LED Strip
•1 x Addressable LED Header
*Supports in total up to 5V/3A, 15W LED Strip
•1 x AMD Fan LED Header
*The AMD Fan LED Header supports LED strips of maximum load of 3A (36W) and length up to 2.5M.
•1 x CPU Fan Connector (4-pin)
*The CPU Fan Connector supports the CPU fan of maximum 1A (12W) fan power.
•2 x Chassis Fan Connectors (1 x 4-pin, 1 x 3-pin) (Smart Fan Speed Control)
*CHA_FAN1 can auto detect if 3-pin or 4-pin fan is in use.
•1 x 24 pin ATX Power Connector
•1 x 8 pin 12V Power Connector
•1 x Front Panel Audio Connector
•1 x AMD LED Fan USB Header
•2 x USB 2.0 Headers (Support 4 USB 2.0 ports) (Supports ESD Protection)
•1 x USB 3.1 Gen1 Header (Supports 2 USB 3.1 Gen1 ports) (Supports ESD Protection)
BIOS |
• |
AMI UEFI Legal BIOS with multilingual GUI support |
Feature |
• |
Supports “Plug and Play” |
|
• ACPI 5.1 compliance wake up events |
|
|
• |
Supports jumperfree |
|
• |
SMBIOS 2.3 support |
|
• DRAM Voltage multi-adjustment |
|
Hardware |
• |
CPU/Chassis temperature sensing |
Monitor |
• |
CPU/Chassis Fan Tachometer |
|
• |
CPU/Chassis Quiet Fan |
|
• CPU/Chassis Fan multi-speed control |
|
|
• Voltage monitoring: +12V, +5V, +3.3V, Vcore |
English
5
OS |
• Microsoft® Windows® 10 64-bit |
|
Certifica- |
• |
FCC, CE |
tions |
• |
ErP/EuP ready (ErP/EuP ready power supply is required) |
* For detailed product information, please visit our website: http://www.asrock.com
Please realize that there is a certain risk involved with overclocking, including adjusting the setting in the BIOS, applying Untied Overclocking Technology, or using thirdparty overclocking tools. Overclocking may affect your system’s stability, or even cause damage to the components and devices of your system. It should be done at your own risk and expense. We are not responsible for possible damage caused by overclocking.
English
6
B450M Pro4-F
1.3 Motherboard Layout
|
|
|
|
1 |
|
|
|
|
2 |
|
3 |
|
4 |
5 |
|
|
|
Keyboard PS2 |
Mous e |
PS2 |
|
|
|
|
|
|
|
|
|
|
|
1 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
AMD_FAN_LED1 |
|
|
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
USB 2.0 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
T: USB1 |
|
|
|
|
|
|
|
CPU_FAN1 |
|
|
|
|
|
|
|
|
|
B: USB2 |
|
|
ATX12V1 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
VGA1 |
DVI1 |
|
|
|
|
|
|
|
|
|
|
(64bit,288-pinmodule) |
(64bit,288-pinmodule) |
(64bit,288-pinmodule) |
|
|
|
HDMI1 |
|
|
|
|
|
|
|
AM4 SOCKET |
(64bit,288-pinmodule) |
|
|
ATXPWR1 |
|
||||
|
|
|
|
|
|
|
|
|
|
6 |
|||||||
USB3 US B3 .1 TC1 Gen1 |
|
|
|
|
|
|
|
|
|
|
|||||||
USB 3.1 Gen1 |
|
|
|
|
|
|
|
A1 |
|
A2 |
B1 |
B2 |
|
|
|
||
T: USB2 |
|
|
|
|
|
|
|
|
_ |
|
_ |
_ |
_ |
|
|
|
|
B: USB3 |
|
|
|
|
|
|
|
|
DDR4 |
|
DDR4 |
DDR4 |
DDR4 |
|
|
|
|
|
|
|
RJ |
|
|
|
|
|
|
|
|
|
|
||||
USB 3.1 Gen1 |
- |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
45 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
T: USB4 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
B: USB5 |
|
LA |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
N |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
CHA_FAN1 |
|
|
|
Ultra M.2 |
|
|
|
|
|
|
|
67 |
|
7 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
MI Bottom: CI N |
FRON Center: T |
LINE Top: IN |
|
|
|
PCIe Gen3 x4 |
|
|
|
|
|
|
|
USB3_ |
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||
|
|
|
|
|
|
|
|
|
M2 1 |
|
|
|
|
|
USB 7 |
|
1 |
|
|
|
|
PCIE1 |
|
|
|
|
|
|
|
|
|
|
8 |
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||
|
|
|
|
|
M2_1_CT1 |
M2_1_CT2 |
M2_1_CT3 |
|
|
|
|
|
|
|
9 |
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
SATA3 3 |
|
10 |
|
|
|
|
|
PCIE2 |
|
|
|
|
|
AMD |
|
|
SATA34 |
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||||
|
|
|
|
|
|
|
|
|
|
|
Promontory |
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
B450 |
|
SATA3 1 |
|
11 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
CMOS |
|
|
|
|
|
|
|
SATA32 |
|
|
|
|
|
|
|
Super |
|
Battery |
|
|
|
|
|
|
|
|
12 |
|
|
|
|
|
|
I/O |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
RoHS |
2 |
|
|
|
|
|
|
|
PCIE3 |
|
|
M2_2_CT4 |
M2_2_CT3 |
M2_2_CT2 |
M2_2_CT1 |
|
M2 |
|
|||
|
HD_AUDIO1 |
|
|
|
COM1 |
|
|
|
|
|
|
SPK_PLED1 |
PANEL1 |
|
|
||
|
|
TPMS1 |
|
|
USB_5_6 |
USB_3_4 |
CHA_FAN2 |
PLED PWRBTN |
|
||||||||
|
|
|
ADDR_LED1 |
RGB_HEADER1 |
|
|
CLRCMOS1 |
|
|
|
|
|
|
|
|
|
|
|
|
|
1 |
1 |
|
1 |
|
|
|
|
|
|
|
|
|
|
|
|
1 |
|
|
|
1 |
1 |
1 |
1 |
|
|
|
1 |
1 |
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
HDLED RESET |
|
|
|
|
|
22 |
|
20 |
|
|
|
|
16 |
|
|
14 |
13 |
|
|
English
7
No. Description
1ATX 12V Power Connector (ATX12V1)
2CPU Fan Connector (CPU_FAN1)
32 x 288-pin DDR4 DIMM Slots (DDR4_A1, DDR4_B1)
42 x 288-pin DDR4 DIMM Slots (DDR4_A2, DDR4_B2)
5AMD Fan LED Header (AMD_FAN_LED1)
6ATX Power Connector (ATXPWR1)
7USB 3.1 Gen1 Header (USB3_67)
8AMD LED Fan USB Header (USB_7)
9SATA3 Connector (SATA3_3)
10SATA3 Connector (SATA3_4)
11SATA3 Connector (SATA3_2)
12SATA3 Connector (SATA3_1)
13System Panel Header (PANEL1)
14Power LED and Speaker Header (SPK_PLED1)
15Chassis Fan Connector (CHA_FAN2)
16USB 2.0 Header (USB_3_4)
17USB 2.0 Header (USB_5_6)
18Clear CMOS Jumper (CLRCMOS1)
19COM Port Header (COM1)
20TPM Header (TPMS1)
21RGB LED Header (RGB_HEADER1)
22Addressable LED Header (ADDR_LED1)
23Front Panel Audio Header (HD_AUDIO1)
24Chassis Fan Connector (CHA_FAN1)
English
8
B450M Pro4-F
1.4 I/O Panel
4
1 |
|
2 |
|
|
|
|
|
|
|
|
|
|
3 |
|
|
|
|
5 |
|||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
13 |
12 |
11 |
10 |
9 |
8 |
7 |
6 |
No. |
Description |
|
No. |
Description |
|
|
|
|
1 |
PS/2 Mouse Port |
|
8 |
USB 3.1 Gen1 Ports (USB3_23) |
|
|||
2 |
DVI-D Port |
|
9 |
USB 3.1 Gen1 Type-C Port (USB3_TC1) |
||||
3 |
LAN RJ-45 Port* |
|
10 |
HDMI Port |
|
|
|
|
4 |
Line In (Light Blue) |
|
11 |
D-Sub Port |
|
|
|
|
5 |
Front Speaker (Lime) |
|
12 |
USB 2.0 Ports (USB_1_2)** |
|
|||
6 |
Microphone (Pink) |
|
13 |
PS/2 Keyboard Port |
|
|
7USB 3.1 Gen1 Ports (USB3_45)
*There are two LEDs on each LAN port. Please refer to the table below for the LAN port LED indications.
ACT/LINK LED SPEED LED
LAN Port |
|
|
|
|
|
|
Activity / Link LED |
|
Speed LED |
|
|
||
|
|
|
||||
Status |
|
Description |
|
Status |
|
Description |
Off |
|
No Link |
|
Off |
|
10Mbps connection |
|
|
|
||||
Blinking |
|
Data Activity |
|
Orange |
|
100Mbps connection |
On |
|
Link |
|
Green |
|
1Gbps connection |
|
|
|
|
|
|
|
** Please note that the USB_1_2 consume auxiliary power (+5VSB) while the other USB ports consume DUAL Power (+5VDUAL). The USB_1_2 are optimal for connecting the USB Type speaker and headset.
English
9
Chapter 2 Installation
This is a Micro ATX form factor motherboard. Before you install the motherboard, study the configuration of your chassis to ensure that the motherboard fits into it.
Pre-installation Precautions
Take note of the following precautions before you install motherboard components or change any motherboard settings.
•Make sure to unplug the power cord before installing or removing the motherboard. Failure to do so may cause physical injuries to you and damages to motherboard components.
•In order to avoid damage from static electricity to the motherboard’s components, NEVER place your motherboard directly on a carpet. Also remember to use a grounded wrist strap or touch a safety grounded object before you handle the components.
•Hold components by the edges and do not touch the ICs.
•Whenever you uninstall any components, place them on a grounded anti-static pad or in the bag that comes with the components.
•When placing screws to secure the motherboard to the chassis, please do not overtighten the screws! Doing so may damage the motherboard.
English
10
B450M Pro4-F
2.1 Installing the CPU
Unplug all power cables before installing the CPU.
1
2
English
11
3
English
12
B450M Pro4-F
2.2 Installing the CPU Fan and Heatsink
After you install the CPU into this motherboard, it is necessary to install a larger heatsink and cooling fan to dissipate heat. You also need to spray thermal grease between the CPU and the heatsink to improve heat dissipation. Make sure that the CPU and the heatsink are securely fastened and in good contact with each other.
Please turn off the power or remove the power cord before changing a CPU or heatsink.
Installing the CPU Box Cooler SR1
1
2
English
13
3
4
English
|
N1 |
FA |
|
U_ |
|
CP |
|
14
B450M Pro4-F
Installing the AM4 Box Cooler SR2
1
2
English
15
3
English
16
B450M Pro4-F
4
|
N1 |
FA |
|
_ |
|
PU |
|
C |
|
5
4-pin FAN cable
RGB LED Cable
|
1 |
N |
|
_FA |
|
PU |
|
C |
|
|
|
1 |
|
|
ED |
|
L |
|
|
_ |
|
+12V |
N |
|
AM |
|
|
|
_FA |
|
|
D |
|
*The diagram shown here are for reference only. Please refer to page 31 for the orientation of AMD Fan LED Header (AMD_FAN_LED1).
English
17
Installing the AM4 Box Cooler SR3
1
2
English
18
B450M Pro4-F
3
4
English
19
5
4-pin FAN cable
|
1 |
N |
|
_FA |
|
PU |
|
C |
|
English
20
B450M Pro4-F
6
+12V
|
|
1 |
|
|
ED |
|
L |
|
|
_ |
|
|
N |
|
FA |
|
|
_ |
|
|
D |
|
|
AM |
|
|
or
7
|
1 |
|
ED |
L |
|
_ |
|
N |
|
_FA |
|
D |
|
AM |
|
|
5 |
|
_ |
B |
|
S |
|
U |
|
Please note that only one cable should be used at a time in this step.
If you select AMD_FAN_LED1, please install ASRock utility "ASRock RGB LED". If you select USB connector, please install AMD utility "SR3 Settings Software".
English
*The diagram shown here are for reference only. Please refer to page 31 for the orientation of AMD Fan LED Header (AMD_FAN_LED1) and page 28 for the orientation of AMD LED Fan USB Header (USB_7).
21
English
2.3 Installing Memory Modules (DIMM)
This motherboard provides four 288-pin DDR4 (Double Data Rate 4) DIMM slots, and supports Dual Channel Memory Technology.
1.For dual channel configuration, you always need to install identical (the same brand, speed, size and chip-type) DDR4 DIMM pairs.
2.It is unable to activate Dual Channel Memory Technology with only one or three memory module installed.
3.It is not allowed to install a DDR, DDR2 or DDR3 memory module into a DDR4 slot; otherwise, this motherboard and DIMM may be damaged.
DDR4 UDIMM Maximum Frequency Support
Ryzen Series CPUs (Pinnacle Ridge):
|
UDIMM Memory Slot |
|
Frequency |
|
A1 |
A2 |
B1 |
B2 |
(Mhz) |
- |
SR |
- |
- |
2933 |
- |
DR |
- |
- |
2933 |
- |
SR |
- |
SR |
2933 |
- |
DR |
- |
DR |
2933 |
SR |
SR |
SR |
SR |
2933 |
SR/DR |
DR |
SR/DR |
DR |
2667 |
SR/DR |
SR/DR |
SR/DR |
SR/DR |
2133-2400 |
Ryzen Series CPUs (Summit Ridge):
|
UDIMM Memory Slot |
|
Frequency |
|
A1 |
A2 |
B1 |
B2 |
(Mhz) |
- |
SR |
- |
- |
2667 |
- |
DR |
- |
- |
2667 |
- |
SR |
- |
SR |
2667 |
- |
DR |
- |
DR |
2667 |
SR |
SR |
SR |
SR |
2667 |
SR/DR |
DR |
SR/DR |
DR |
2667 |
SR/DR |
SR/DR |
SR/DR |
SR/DR |
2133-2400 |
22