Loading...
Version 1.0
Published October 2016
Copyright©2016 ASRock INC. All rights reserved.
Copyright Notice:
No part of this documentation may be reproduced, transcribed, transmitted, or translated in any language, in any form or by any means, except duplication of documentation by the purchaser for backup purpose, without written consent of ASRock Inc.
Products and corporate names appearing in this documentation may or may not be registered trademarks or copyrights of their respective companies, and are used only for identification or explanation and to the owners’ benefit, without intent to
infringe.
Disclaimer:
Specifications and information contained in this documentation are furnished for informational use only and subject to change without notice, and should not be constructed as a commitment by ASRock. ASRock assumes no responsibility for any errors or omissions that may appear in this documentation.
With respect to the contents of this documentation, ASRock does not provide warranty of any kind, either expressed or implied, including but not limited to the implied warranties or conditions of merchantability or fitness for a particular purpose.
In no event shall ASRock, its directors, officers, employees, or agents be liable for any indirect, special, incidental, or consequential damages (including damages for loss of profits, loss of business, loss of data, interruption of business and the like), even if ASRock has been advised of the possibility of such damages arising from any defect or error in the documentation or product.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1)this device may not cause harmful interference, and
(2)this device must accept any interference received, including interference that may cause undesired operation.
CALIFORNIA, USA ONLY
The Lithium battery adopted on this motherboard contains Perchlorate, a toxic substance controlled in Perchlorate Best Management Practices (BMP) regulations passed by the California Legislature. When you discard the Lithium battery in California, USA, please follow the related regulations in advance.
“Perchlorate Material-special handling may apply, see www.dtsc.ca.gov/hazardouswaste/ perchlorate”
ASRock Website: http://www.asrock.com
AUSTRALIA ONLY
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage caused by our goods. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure. If you require assistance please call ASRock Tel : +886-2-28965588 ext.123 (Standard International call charges apply)
The terms HDMI™ and HDMI High-Definition Multimedia Interface, and the HDMI logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.
Contents
Chapter 1 Introduction |
1 |
|
1.1 |
Package Contents |
1 |
1.2 |
Specifications |
2 |
1.3 |
Motherboard Layout |
6 |
1.4 |
I/O Panel |
8 |
Chapter 2 Installation |
10 |
|
2.1 |
Installing the CPU |
11 |
2.2 |
Installing the CPU Fan and Heatsink |
14 |
2.3 |
Installing Memory Modules (DIMM) |
15 |
2.4 |
Expansion Slots (PCI Express Slots) |
17 |
2.5 |
Onboard Headers and Connectors |
18 |
2.6 |
M.2_SSD (NGFF) Module Installation Guide |
23 |
Chapter 3 Software and Utilities Operation |
26 |
|
3.1 |
Installing Drivers |
26 |
3.2 |
ASRock Live Update & APP Shop |
27 |
3.2.1 |
UI Overview |
27 |
3.2.2 |
Apps |
28 |
3.2.3 |
BIOS & Drivers |
31 |
3.2.4 |
Setting |
32 |
3.3 |
Enabling USB Ports for Windows® 7 Installation |
33 |
Chapter 4 UEFI SETUP UTILITY |
36 |
|
4.1 |
Introduction |
36 |
4.2 |
EZ Mode |
37 |
4.3 |
Advanced Mode |
38 |
4.3.1 |
UEFI Menu Bar |
38 |
4.3.2 |
Navigation Keys |
39 |
4.4 |
Main Screen |
40 |
4.5 |
OC Tweaker Screen |
41 |
4.6 |
Advanced Screen |
47 |
4.6.1 |
CPU Configuration |
48 |
4.6.2 |
Chipset Configuration |
50 |
4.6.3 |
Storage Configuration |
53 |
4.6.4 |
Super IO Configuration |
54 |
4.6.5 |
ACPI Configuration |
55 |
4.6.6 |
USB Configuration |
57 |
4.6.7 |
Trusted Computing |
58 |
4.7 |
Tools |
59 |
4.8 |
Hardware Health Event Monitoring Screen |
62 |
4.9 |
Security Screen |
64 |
4.10 |
Boot Screen |
65 |
4.11 |
Exit Screen |
68 |
B250M-HDV
Chapter 1 Introduction
Thank you for purchasing ASRock B250M-HDV motherboard, a reliable motherboard produced under ASRock’s consistently stringent quality control. It delivers excellent performance with robust design conforming to ASRock’s commitment to quality and endurance.
In this documentation, Chapter 1 and 2 contains the introduction of the motherboard and step-by-step installation guides. Chapter 3 contains the operation guide of the software and utilities. Chapter 4 contains the configuration guide of the BIOS setup.
Because the motherboard specifications and the BIOS software might be updated, the content of this documentation will be subject to change without notice. In case any modifications of this documentation occur, the updated version will be available on ASRock’s website without further notice. If you require technical support related to this motherboard, please visit our website for specific information about the model you are using. You may find the latest VGA cards and CPU support list on ASRock’s website as well. ASRock website http://www.asrock.com.
1.1 Package Contents
•ASRock B250M-HDV Motherboard (Micro ATX Form Factor)
•ASRock B250M-HDV Quick Installation Guide
•ASRock B250M-HDV Support CD
•2 x Serial ATA (SATA) Data Cables (Optional)
•1 x Screw for M.2 Socket (Optional)
•1 x I/O Panel Shield
English
1
English
1.2 Specifications
Platform |
• |
Micro ATX Form Factor |
|
• |
Solid Capacitor design |
CPU |
• |
Supports 7th and 6th Generation Intel® CoreTM i7/i5/i3/ |
|
|
Pentium®/Celeron® Processors (Socket 1151) |
|
• |
Digi Power design |
|
• 5 Power Phase design |
|
|
• Supports Intel® Turbo Boost 2.0 Technology |
|
Chipset |
• |
Intel® B250 |
Memory |
• |
Dual Channel DDR4 Memory Technology |
•2 x DDR4 DIMM Slots
•Supports DDR4 2400/2133 non-ECC, un-buffered memory*
*7th Gen Intel® CPU supports DDR4 up to 2400; 6th Gen Intel® CPU supports DDR4 up to 2133.
•Supports ECC UDIMM memory modules (operate in nonECC mode)
•Max. capacity of system memory: 32GB
•Supports Intel® Extreme Memory Profile (XMP) 2.0
•15μ Gold Contact in DIMM Slots
Expansion |
• 1 x PCI Express 3.0 x16 Slot (PCIE1: x16 mode)* |
Slot |
* Supports NVMe SSD as boot disks |
|
• 2 x PCI Express 3.0 x1 Slots (Flexible PCIe) |
Graphics |
• Intel® HD Graphics Built-in Visuals and the VGA outputs |
|
can be supported only with processors which are GPU |
|
integrated. |
|
• Supports Intel® HD Graphics Built-in Visuals : Intel® Quick |
|
Sync Video with AVC, MVC (S3D) and MPEG-2 Full |
|
HW Encode1, Intel® InTruTM 3D, Intel® Clear Video HD |
|
Technology, Intel® InsiderTM, Intel® HD Graphics |
|
• Gen9 LP, DX11.3, DX12 |
|
• HWAEncode/Decode: VP8, HEVC 8b, VP9, HEVC 10b (For |
|
7th Gen Intel® CPU) |
2
B250M-HDV
|
• HWA Encode/Decode: VP8 , HEVC 8b; GPU/SWEncode/ |
|
|
|
Decode: VP9, HEVC 10b (For 6th Gen Intel® CPU) |
|
• Max. shared memory 1024MB |
|
|
* The size of maximum shared memory may vary from different |
|
|
operating systems. |
|
|
• Three graphics output options: D-Sub, DVI-D and HDMI |
|
|
• |
Supports Triple Monitor |
|
• Supports HDMI with max. resolution up to 4K x 2K |
|
|
|
(4096x2160) @ 24Hz / (3840x2160) @ 30Hz |
|
• Supports DVI-D with max. resolution up to 1920x1200 @ |
|
|
|
60Hz |
|
• Supports D-Sub with max. resolution up to 1920x1200 @ |
|
|
|
60Hz |
|
• Supports Auto Lip Sync, Deep Color (12bpc), xvYCC and |
|
|
|
HBR (High Bit Rate Audio) with HDMI Port (Compliant |
|
|
HDMI monitor is required) |
|
• Supports HDCP with DVI-D and HDMI Ports |
|
|
• Supports Full HD 1080p Blu-ray (BD) playback with DVI-D |
|
|
|
and HDMI Ports |
Audio |
• |
7.1 CH HD Audio (Realtek ALC887 Audio Codec) |
|
* To configure 7.1 CH HD Audio, it is required to use an HD |
|
|
front panel audio module and enable the multi-channel audio |
|
|
feature through the audio driver. |
|
|
• Supports Surge Protection (ASRock Full Spike Protection) |
|
|
• |
ELNA Audio Caps |
LAN |
• |
Gigabit LAN 10/100/1000 Mb/s |
|
• Giga PHY Intel® I219V |
|
|
• Supports Wake-On-LAN |
|
|
• Supports Lightning/ESD Protection (ASRock Full Spike |
|
|
|
Protection) |
|
• Supports Energy Efficient Ethernet 802.3az |
|
|
• |
Supports PXE |
English
3
English
Rear Panel |
• 1 x PS/2 Mouse/Keyboard Port |
I/O |
• 1 x D-Sub Port |
|
• 1 x DVI-D Port |
|
• 1 x HDMI Port |
|
• 2 x USB 2.0 Ports (Supports ESD Protection (ASRock Full |
|
Spike Protection)) |
|
• 4 x USB 3.0 Ports (Supports ESD Protection (ASRock Full |
|
Spike Protection)) |
|
• 1 x RJ-45 LAN Port with LED (ACT/LINK LED and SPEED |
|
LED) |
|
• HD Audio Jacks: Line in / Front Speaker / Microphone |
Storage |
• 6 x SATA3 6.0 Gb/s Connectors, support NCQ, AHCI and |
|
Hot Plug* |
*If M2_1 is occupied by a SATA-type M.2 device, SATA3_5 will be disabled.
•1 x Ultra M.2 Socket, supports type 2230/2242/2260/2280 M.2 SATA3 6.0 Gb/s module and M.2 PCI Express module up to Gen3 x4 (32 Gb/s)**
**Supports Intel® OptaneTM Technology
**Supports NVMe SSD as boot disks
**Supports ASRock U.2 Kit
Connector • 1 x Print Port Header
•1 x COM Port Header
•1 x TPM Header
•1 x Chassis Intrusion Header
•1 x CPU Fan Connector (4-pin)
*The CPU Fan Connector supports the CPU fan of maximum 1A (12W) fan power.
•2 x Chassis Fan Connectors (4-pin)
•1 x 24 pin ATX Power Connector
•1 x 4 pin 12V Power Connector
•1 x Front Panel Audio Connector
•2 x USB 2.0 Headers (Support 4 USB 2.0 ports) (Supports ESD Protection (ASRock Full Spike Protection))
•1 x USB 3.0 Header (Supports 2 USB 3.0 ports) (Supports ESD Protection (ASRock Full Spike Protection))
4
B250M-HDV
BIOS |
• |
AMI UEFI Legal BIOS with multilingual GUI support |
Feature |
• |
ACPI 6.0 Compliant wake up events |
|
• |
SMBIOS 2.7 Support |
|
• CPU, GT_CPU, DRAM, PCH 1.0V Voltage Multi-adjustment |
|
Hardware |
• |
CPU/Chassis temperature sensing |
Monitor |
• |
CPU/Chassis Fan Tachometer |
|
• CPU/Chassis Quiet Fan (Auto adjust chassis fan speed by |
|
|
|
CPU temperature) |
|
• CPU/Chassis Fan multi-speed control |
|
|
• |
CASE OPEN detection |
|
• Voltage monitoring: +12V, +5V, +3.3V, CPU Vcore, DRAM, |
|
|
|
PCH 1.0V |
OS |
• |
Microsoft® Windows® 10 64-bit (For 7th Gen Intel® CPU) |
|
• Microsoft® Windows® 10 64-bit / 8.1 64-bit / 7 32-bit / 7 64- |
|
|
|
bit (For 6th Gen Intel® CPU) |
|
* To install Windows® 7 OS, a modified installation disk with |
|
|
xHCI drivers packed into the ISO file is required. Please refer to |
|
|
page 33 for more detailed instructions. |
|
|
* For the updated Windows® 10 driver, please visit ASRock’s |
|
|
website for details: http://www.asrock.com |
|
Certifica- |
• |
FCC, CE, WHQL, RCM, BSMI |
tions |
|
|
* For detailed product information, please visit our website: http://www.asrock.com
Please realize that there is a certain risk involved with overclocking, including adjusting the setting in the BIOS, applying Untied Overclocking Technology, or using third-party overclocking tools. Overclocking may affect your system’s stability, or even cause damage to the components and devices of your system. It should be done at your own risk and expense. We are not responsible for possible damage caused by overclocking.
English
5
1.3 Motherboard Layout
/Mouse |
Keyboard PS2 |
B:USB2 |
T:USB1 |
USB2.0 |
|
|
|
|
CPU_FAN1 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|||||
|
|
|
|
|
|
ATX12V1 |
|
|
|
RoHS |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
DVI1 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
VGA1 |
|
|
|
|
|
|
|
|
|
bit,288-pinmodule) |
bit,288-pinmodule) |
ATXPWR1 |
|
|
|
|
|
|
|
|
|
|
|
|
|
(64 |
(64 |
|
|
|
HDMI1 |
|
|
|
|
|
|
|
|
OptaneReady |
DDR4 A1 |
DDR4 B1 |
|
|
FrontUSB3.0 |
|
USB 3.0 |
|
|
|
|
|
|
|
|
|
|
|||||
T: USB1 |
|
|
|
|
|
|
|
|
|
|
|||||
B: USB2 |
|
|
|
|
|
|
|
|
|
|
|||||
|
|
|
|
|
|
|
|
B250M-HDV |
5 6 |
|
|||||
|
|
|
|
|
|
|
|
|
|
|
_ |
|
|
||
USB 3.0 |
|
|
|
|
|
|
Ultra M.2 |
|
|
USB3 |
|
|
|||
|
Top: |
|
CHA_FAN1 |
|
|
|
|
|
|
|
|||||
T: USB3 |
|
|
|
|
PCIe Gen3 x4 |
|
|
|
|
||||||
|
RJ-45 |
|
|
|
|
|
|
|
|
|
|||||
B: USB4 |
|
|
|
|
|
|
|
|
|
|
|
||||
|
|
|
|
|
|
|
|
|
1 |
|
|
|
|
1 |
|
MI Bottom: CI N |
|
LINE Top: IN |
|
CT4 |
CT3 |
CT2 |
Ct1 |
M2_ |
|
|
|
|
|
|
|
FRON Center: T |
|
|
|
|
|
|
|
|
|
USB 5 6 |
|
|
|||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1 |
|
|
|
|
|
|
|
|
|
PCIE1 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
PCI Express 3.0 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
CMOS |
|
|
4 |
|
|
5 |
|
|
|
|
|
|
|
|
|
|
|
SATA3 |
|
|
SATA3 |
|
|
|
|
|
|
|
PCIE2 |
|
|
Battery |
Intel |
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
BIOS |
B250 |
SATA3 2 |
|
|
SATA3 3 |
||
|
|
|
|
|
|
|
|
ROM |
|
|
|||||
|
|
|
|
|
|
|
|
|
|
|
|||||
|
|
|
|
|
|
PCIE3 |
|
|
|
|
|
|
PANEL1 |
|
|
|
|
|
|
|
|
|
|
|
|
CI1 |
|
SPEAKER1 |
|
PWRBTN |
RESET |
|
|
|
|
|
|
|
|
|
|
|
1 |
|
|||
|
|
|
|
|
|
|
|
|
CLRMOS1 |
1 |
|
|
PLED |
HDLED |
|
|
|
|
|
|
COM1 |
LPT1 |
|
USB_3_4 |
|
SATA3_0 |
|
SATA3_1 |
CHA_FAN2 |
||
|
HD_AUDIO1 |
|
|
|
TPMS1 |
|
|
|
|
|
|||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1 |
|
|
|
|
1 |
|
|
|
|
|
1 |
|
|
|
|
|
1 |
|
|
1 |
|
|
|
|
|
|
|
|
|
|
||
|
|
|
|
|
1 |
|
|
|
|
|
|
|
|||
English
6
B250M-HDV
No. Description
1ATX 12V Power Connector (ATX12V1)
2CPU Fan Connector (CPU_FAN1)
32 x 288-pin DDR4 DIMM Slots (DDR4_A1, DDR4_B1)
4ATX Power Connector (ATXPWR1)
5USB 3.0 Header (USB3_5_6)
6USB 2.0 Header (USB_5_6)
7SATA3 Connector (SATA3_4)
8SATA3 Connector (SATA3_5)
9SATA3 Connector (SATA3_3)
10SATA3 Connector (SATA3_2)
11System Panel Header (PANEL1)
12Chassis Fan Connector (CHA_FAN2)
13Chassis Speaker Header (SPEAKER1)
14SATA3 Connector (SATA3_1)
15SATA3 Connector (SATA3_0)
16Chassis Intrusion Header (CI1)
17TPM Header (TPMS1)
18USB 2.0 Header (USB_3_4)
19Print Port Header (LPT1)
20COM Port Header (COM1)
21Front Panel Audio Header (HD_AUDIO1)
22Chassis Fan Connector (CHA_FAN1)
English
7
English
1.4 I/O Panel
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
3 |
|
|
1 |
|
2 |
|
|
|
4 |
|||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
11 10 9 8 7 6 5
No. |
Description |
No. |
Description |
1 |
USB 2.0 Ports (USB_12) |
7 |
USB 3.0 Ports (USB3_1_2) |
2 |
LAN RJ-45 Port* |
8 |
HDMI Port |
3 |
Line In (Light Blue)** |
9 |
D-Sub Port |
4 |
Front Speaker (Lime)** |
10 |
DVI-D Port |
5 |
Microphone (Pink)** |
11 |
PS/2 Keyboard/Mouse Port |
6USB 3.0 Ports (USB3_34)
*There are two LEDs on the LAN port. Please refer to the table below for the LAN port LED indications.
ACT/LINK LED SPEED LED
LAN Port |
|
|
|
|
|
|
Activity / Link LED |
|
Speed LED |
|
|
||
|
|
|
||||
Status |
|
Description |
|
Status |
|
Description |
Off |
|
No Link |
|
Off |
|
10Mbps connection |
|
|
|
||||
Blinking |
|
Data Activity |
|
Orange |
|
100Mbps connection |
On |
|
Link |
|
Green |
|
1Gbps connection |
|
|
|
|
|
|
|
8
B250M-HDV
** To configure 7.1 CH HD Audio, it is required to use an HD front panel audio module and enable the multichannel audio feature through the audio driver.
Please set Speaker Configuration to “7.1 Speaker”in the Realtek HD Audio Manager.
Function of the Audio Ports in 7.1-channel Configuration:
Port |
|
Function |
Light Blue (Rear panel) |
|
Rear Speaker Out |
|
||
Lime (Rear panel) |
|
Front Speaker Out |
Pink (Rear panel) |
|
Central /Subwoofer Speaker Out |
Lime (Front panel) |
|
Side Speaker Out |
English
9
Chapter 2 Installation
This is a Micro ATX form factor motherboard. Before you install the motherboard, study the configuration of your chassis to ensure that the motherboard fits into it.
Pre-installation Precautions
Take note of the following precautions before you install motherboard components or change any motherboard settings.
•Make sure to unplug the power cord before installing or removing the motherboard components. Failure to do so may cause physical injuries and damages to motherboard components.
•In order to avoid damage from static electricity to the motherboard’s components, NEVER place your motherboard directly on a carpet. Also remember to use a grounded wrist strap or touch a safety grounded object before you handle the components.
•Hold components by the edges and do not touch the ICs.
•Whenever you uninstall any components, place them on a grounded anti-static pad or in the bag that comes with the components.
•When placing screws to secure the motherboard to the chassis, please do not overtighten the screws! Doing so may damage the motherboard.
English
10
B250M-HDV
2.1Installing the CPU
1.Before you insert the 1151-Pin CPU into the socket, please check if the PnP cap is on the socket, if the CPU surface is unclean, or if there are any bent pins in the socket. Do not force to insert the CPU into the socket if above situation is found. Otherwise, the CPU will be seriously damaged.
2.Unplug all power cables before installing the CPU.
1
A
B
2
English
11
3 |
4 |
5
English
12
B250M-HDV
Please save and replace the cover if the processor is removed. The cover must be placed if you wish to return the motherboard for after service.
English
13
2.2 Installing the CPU Fan and Heatsink
1 |
2 |
N _FA PU C
English
14
B250M-HDV
2.3 Installing Memory Modules (DIMM)
This motherboard provides two 288-pin DDR4 (Double Data Rate 4) DIMM slots, and supports Dual Channel Memory Technology.
1.For dual channel configuration, you always need to install identical (the same brand, speed, size and chip-type) DDR4 DIMM pairs.
2.It is unable to activate Dual Channel Memory Technology with only one memory module installed.
3.It is not allowed to install a DDR, DDR2 or DDR3 memory module into a DDR4 slot; otherwise, this motherboard and DIMM may be damaged.
The DIMM only fits in one correct orientation. It will cause permanent damage to the motherboard and the DIMM if you force the DIMM into the slot at incorrect orientation.
English
15
1
2
3
English
16
B250M-HDV
2.4 Expansion Slots (PCI Express Slots)
There is 1 PCI slot and 3 PCI Express slots on the motherboard.
Before installing an expansion card, please make sure that the power supply is switched off or the power cord is unplugged. Please read the documentation of the expansion card and make necessary hardware settings for the card before you start the installation.
PCIe slots:
PCIE1 (PCIe 3.0 x16 slot) is used for PCI Express x16 lane width graphics cards. PCIE2 (PCIe 3.0 x1 slot) is used for PCI Express x1 lane width cards.
PCIE3 (PCIe 3.0 x1 slot) is used for PCI Express x1 lane width cards.
English
17
2.5 Onboard Headers and Connectors
Onboard headers and connectors are NOT jumpers. Do NOT place jumper caps over these headers and connectors. Placing jumper caps over the headers and connectors will cause permanent damage to the motherboard.
System Panel Header
(9-pin PANEL1)
(see p.6, No. 11)
|
GND |
GND |
RESET# |
PWRBTN# |
GND |
PLED- |
HDLED- |
PLED+ |
HDLED+ |
|
1 |
Connect the power switch, reset switch and system status indicator on the chassis to this header according to the pin assignments below. Note the positive and negative pins before connecting the cables.
PWRBTN (Power Switch):
Connect to the power switch on the chassis front panel. You may configure the way to turn off your system using the power switch.
RESET (Reset Switch):
Connect to the reset switch on the chassis front panel. Press the reset switch to restart the computer if the computer freezes and fails to perform a normal restart.
PLED (System Power LED):
Connect to the power status indicator on the chassis front panel. The LED is on when the system is operating. The LED keeps blinking when the system is in S1/S3 sleep state. The LED is off when the system is in S4 sleep state or powered off (S5).
HDLED (Hard Drive Activity LED):
Connect to the hard drive activity LED on the chassis front panel. The LED is on when the hard drive is reading or writing data.
The front panel design may differ by chassis. A front panel module mainly consists of power switch, reset switch, power LED, hard drive activity LED, speaker and etc. When connecting your chassis front panel module to this header, make sure the wire assignments and the pin assignments are matched correctly.
English
18
Loading...