ASRock 760GM-GS3, 760GM-S3 User Manual

4 (1)

Copyright Notice:

No part of this installation guide may be reproduced, transcribed, transmitted, or translated in any language, in any form or by any means, except duplication of documentation by the purchaser for backup purpose, without written consent of ASRock Inc.

Products and corporate names appearing in this guide may or may not be registered trademarks or copyrights of their respective companies, and are used only for identification or explanation and to the owners’ benefit, without intent to infringe.

Disclaimer:

Specifications and information contained in this guide are furnished for informational use only and subject to change without notice, and should not be constructed as a commitment by ASRock. ASRock assumes no responsibility for any errors or omissions that may appear in this guide.

With respect to the contents of this guide, ASRock does not provide warranty of any kind, either expressed or implied, including but not limited to the implied warranties or conditions of merchantability or fitness for a particular purpose. In no event shall ASRock, its directors, officers, employees, or agents be liable for any indirect, special, incidental, or consequential damages (including damages for loss of profits, loss of business, loss of data, interruption of business and the like), even if ASRock has been advised of the possibility of such damages arising from any defect or error in the guide or product.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1)this device may not cause harmful interference, and

(2)this device must accept any interference received, including interference that may cause undesired operation.

CALIFORNIA, USA ONLY

The Lithium battery adopted on this motherboard contains Perchlorate, a toxic substance controlled in Perchlorate Best Management Practices (BMP) regulations passed by the California Legislature. When you discard the Lithium battery in California, USA, please follow the related regulations in advance.

“Perchlorate Material-special handling may apply, see www.dtsc.ca.gov/hazardouswaste/perchlorate

ASRock Website: http://www.asrock.com

Published September 2010

Copyright©2010 ASRock INC. All rights reserved.

1

English

ASRock 760GM-GS3 / 760GM-S3 Motherboard

ASRock 760GM-GS3, 760GM-S3 User Manual

Motherboard Layout

(7680GM-GS3 / 760GM-S3)

English

2

1

PS2_USB_PW1 Jumper

15

System Panel Header (PANEL1, White)

2

ATX 12V Power Connector (ATX12V1)

16

Secondary SATAII Connector

3

CPU Heatsink Retention Module

 

(SATAII_2 (PORT 1))

4

AM3 CPU Socket

17

Primary SATAII Connector

5

2 x 240-pin DDR3 DIMM Slots

 

(SATAII_1 (PORT 0))

 

(Dual Channel: DDR3_A1, DDR3_B1; Blue)

18

USB 2.0 Header (USB4_5, Blue)

6

CPU Fan Connector (CPU_FAN1)

19

USB 2.0 Header (USB6_7, Blue)

7

ATX Power Connector (ATXPWR1)

20

Chassis Fan Connector (CHA_FAN1)

8

Chassis Speaker Header

21

Floppy Connector (FLOPPY1)

 

(SPEAKER 1, White)

22

Print Port Header (LPT1, White)

9

Clear CMOS Jumper (CLRCMOS1)

23

Front Panel Audio Header

10

Primary IDE Connector (IDE1, Blue)

 

(HD_AUDIO1, White)

11

Northbridge Controller

24

PCI Slots (PCI1- 2)

12

Southbridge Controller

25

SPI Flash Memory (8Mb)

13

Third SATAII Connector (SATAII_3 (PORT 2))

26

PCI Express 2.0 x16 Slot (PCIE2; Blue)

14

Fourth SATAII Connector (SATAII_4 (PORT 3))

27

PCI Express 2.0 x1 Slot (PCIE1; Blue)

 

 

28

Power Fan Connector (PWR_FAN1)

ASRock 760GM-GS3 / 760GM-S3 Motherboard

I/O Panel (760GM-GS3)

1

PS/2 Mouse Port (Green)

6

Microphone (Pink)

2

USB 2.0 Ports (USB23)

7

USB 2.0 Ports (USB01)

* 3

RJ-45 Port

8

VGA Port

4

Line

In (Light Blue)

9

COM Port

5

Line

Out (Lime)

10

PS/2 Keyboard Port (Purple)

*There are two LED next to the LAN port. Please refer to the table below for the LAN port LED indications.

LAN Port LED Indications

Activity/Link LED

 

 

SPEED LED

ACT/LINK

SPEED

 

 

LED

LED

Status

Description

 

Status

 

Description

 

 

Off

No Activity

 

Off

 

10Mbps connection

 

 

Blinking

Data Activity

 

Orange

 

100Mbps connection

 

 

 

 

 

Green

 

1Gbps connection

LAN Port

 

 

 

 

 

 

*To enable Multi-Streaming function, you need to connect a front panel audio cable to the front panel audio header. Please refer to below steps for the software setting of Multi-Streaming.

For Windows® XP:

After restarting your computer, you will find “Mixer” tool on your system. Please select “Mixer

ToolBox”

, click “Enable playback multi-streaming”, and click “ok”. Choose “2CH” or

“4CH” and then you are allowed to select “Realtek HDA Primary output” to use Rear Speaker and Front Speaker, or select “Realtek HDA Audio 2nd output” to use front panel audio. Then reboot your system.

For Windows® 7 / VistaTM:

After restarting your computer, please double-click “Realtek HD Audio Manager” on the system tray. Set “Speaker Configuration” to “Quadraphonic” or “Stereo”. Click “Device advanced settings”, choose “Make front and rear output devices playbacks two different audio streams simultaneously”, and click “ok”. Then reboot your system.

3

English

ASRock 760GM-GS3 / 760GM-S3 Motherboard

I/O Panel (760GM-S3)

English

4

1

PS/2 Mouse Port (Green)

6

Microphone (Pink)

2

USB 2.0 Ports (USB23)

7

USB 2.0 Ports (USB01)

* 3

RJ-45 Port

8

VGA Port

4

Line

In (Light Blue)

9

COM Port

5

Line

Out (Lime)

10

PS/2 Keyboard Port (Purple)

*There are two LED next to the LAN port. Please refer to the table below for the LAN port LED indications.

LAN Port LED Indications

Activity/Link LED

 

 

SPEED LED

ACT/LINK

SPEED

 

 

LED

LED

Status

Description

 

Status

 

Description

 

 

 

 

Off

No Activity

 

Off

 

10Mbps connection

 

 

Blinking

Data Activity

 

Orange

 

100Mbps connection

 

 

LAN Port

*To enable Multi-Streaming function, you need to connect a front panel audio cable to the front panel audio header. Please refer to below steps for the software setting of Multi-Streaming.

For Windows® XP:

After restarting your computer, you will find “Mixer” tool on your system. Please select “Mixer

ToolBox”

, click “Enable playback multi-streaming”, and click “ok”. Choose “2CH” or

“4CH” and then you are allowed to select “Realtek HDA Primary output” to use Rear Speaker and Front Speaker, or select “Realtek HDA Audio 2nd output” to use front panel audio. Then reboot your system.

For Windows® 7 / VistaTM:

After restarting your computer, please double-click “Realtek HD Audio Manager” on the system tray. Set “Speaker Configuration” to “Quadraphonic” or “Stereo”. Click “Device advanced settings”, choose “Make front and rear output devices playbacks two different audio streams simultaneously”, and click “ok”. Then reboot your system.

ASRock 760GM-GS3 / 760GM-S3 Motherboard

1. Introduction

Thank you for purchasing ASRock 760GM-GS3 / 760GM-S3 motherboard, a reliable motherboard produced under ASRock’s consistently stringent quality control. It delivers excellent performance with robust design conforming to ASRock’s commitment to quality and endurance.

In this manual, chapter 1 and 2 contain introduction of the motherboard and step-by-step guide to the hardware installation. Chapter 3 and 4 contain the configuration guide to BIOS setup and information of the Support CD.

Because the motherboard specifications and the BIOS software might be updated, the content of this manual will be subject to change without notice. In case any modifications of this manual occur, the updated version will be available on ASRock website without further notice. You may find the latest VGA cards and CPU support lists on ASRock website as well. ASRock website http://www.asrock.com

If you require technical support related to this motherboard, please visit our website for specific information about the model you are using. www.asrock.com/support/index.asp

1.1Package Contents

ASRock 760GM-GS3 / 760GM-S3 Motherboard

(Micro ATX Form Factor: 9.6-in x 7.2-in, 24.4 cm x 18.3 cm) ASRock 760GM-GS3 / 760GM-S3 Quick Installation Guide ASRock 760GM-GS3 / 760GM-S3 Support CD

2 x Serial ATA (SATA) Data Cables (Optional)

1 x I/O Panel Shield

English

5

ASRock 760GM-GS3 / 760GM-S3 Motherboard

English

6

1.2Specifications

Platform

- Micro ATX Form Factor: 9.6-in x 7.2-in, 24.4 cm x 18.3 cm

CPU

- Support for Socket AM3 processors: AMD PhenomTM II X6 /

 

X4 / X3 / X2 (except 920 / 940) / Athlon II X4 / X3 / X2 /

 

Sempron processors

 

- Six-Core CPU Ready

 

- Supports AMD OverDriveTM with ACC feature (Advanced

 

Clock Calibration)

 

- AMD LIVE!TM Ready

 

- Supports AMD’s Cool ‘n’ QuietTM Technology

 

- FSB 2600 MHz (5.2 GT/s)

 

- Supports Untied Overclocking Technology (see CAUTION 1)

 

- Supports Hyper-Transport 3.0 (HT 3.0) Technology

Chipset

- Northbridge: AMD 760G

 

- Southbridge: AMD SB710

Memory

- Dual Channel DDR3 Memory Technology (see CAUTION 2)

 

- 2 x DDR3 DIMM slots

 

- Support DDR3 1800(OC)/1600(OC)/1333/1066/800 non-ECC,

 

un-buffered memory (see CAUTION 3)

 

- Max. capacity of system memory: 8GB (see CAUTION 4)

Expansion Slot

- 1 x PCI Express 2.0 x16 slot (blue @ x16 mode)

 

- 1 x PCI Express 2.0 x1 slot

 

- 2 x PCI slots

Graphics

- Integrated AMD Radeon HD 3000 graphics

 

- DX10 class iGPU, Pixel Shader 4.0

 

- Max. shared memory 512MB (see CAUTION 5)

 

- Supports D-Sub with max. resolution up to 2048x1536 @

 

60Hz

 

 

Audio

- 5.1 CH HD Audio (Realtek ALC662 Audio Codec)

 

 

LAN

- 760GM-GS3

 

Realtek PCIE x1 Gigabit LAN RTL8111E,

 

speed 10/100/1000 Mb/s

 

- 760GM-S3

 

Realtek PCIEx1 LAN 8105EL, speed 10/100 Mb/s

 

- Supports Wake-On-LAN

Rear Panel I/O

I/O Panel

 

- 1 x PS/2 Mouse Port

 

- 1 x PS/2 Keyboard Port

 

- 1 x Serial Port: COM1

 

- 1 x VGA Port

ASRock 760GM-GS3 / 760GM-S3 Motherboard

 

- 4 x Ready-to-Use USB 2.0 Ports

 

- 1 x RJ-45 LAN Port with LED (ACT/LINK LED and SPEED LED)

 

- HD Audio Jack: Line in / Front Speaker / Microphone

 

 

Connector

- 4 x Serial ATAII 3.0Gb/s connectors, support RAID (RAID 0,

 

RAID 1, RAID 10 and JBOD), NCQ, AHCI and “Hot Plug”

 

functions (see CAUTION 6)

 

- 1 x ATA133 IDE connector (supports 2 x IDE devices)

 

- 1 x Floppy connector

 

- 1 x Print port header

 

- CPU/Chassis/Power FAN connector

 

- 24 pin ATX power connector

 

- 4 pin 12V power connector

 

- Front panel audio connector

 

- 2 x USB 2.0 headers (support 4 USB 2.0 ports)

BIOS Feature

- 8Mb AMI BIOS

 

- AMI Legal BIOS

 

- Supports “Plug and Play”

 

- ACPI 1.1 Compliance Wake Up Events

 

- Supports jumperfree

 

- SMBIOS 2.3.1 Support

 

- CPU, VCCM, NB Voltage Multi-adjustment

Support CD

- Drivers, Utilities, AntiVirus Software (Trial Version),

 

AMD OverDriveTM Utility, ASRock Software Suite (CyberLink

 

DVD Suite - OEM and Trial; Creative Sound Blaster X-Fi MB -

 

Trial)

Unique Feature

- ASRock OC Tuner (see CAUTION 7)

 

- Intelligent Energy Saver (see CAUTION 8)

 

- Instant Boot

 

- ASRock Instant Flash (see CAUTION 9)

 

- ASRock OC DNA (see CAUTION 10)

 

- ASRock AIWI (see CAUTION 11)

 

- ASRock APP Charger (see CAUTION 12)

 

- Hybrid Booster:

 

- CPU Frequency Stepless Control (see CAUTION 13)

 

- ASRock U-COP (see CAUTION 14)

 

- Boot Failure Guard (B.F.G.)

Hardware

- CPU Temperature Sensing

Monitor

- Chassis Temperature Sensing

 

- CPU/Chassis/Power Fan Tachometer

 

- CPU Quiet Fan

 

- Voltage Monitoring: +12V, +5V, +3.3V, Vcore

 

 

English

7

ASRock 760GM-GS3 / 760GM-S3 Motherboard

English

8

OS

- Microsoft® Windows® 7 / 7 64-bit / VistaTM / VistaTM 64-bit

 

/ XP / XP Media Center / XP 64-bit compliant

Certifications

- FCC, CE, WHQL

-ErP/EuP Ready (ErP/EuP ready power supply is required) (see CAUTION 15)

*For detailed product information, please visit our website: http://www.asrock.com

WARNING

Please realize that there is a certain risk involved with overclocking, including adjusting the setting in the BIOS, applying Untied Overclocking Technology, or using the thirdparty overclocking tools. Overclocking may affect your system stability, or even cause damage to the components and devices of your system. It should be done at your own risk and expense. We are not responsible for possible damage caused by overclocking.

CAUTION!

1.This motherboard supports Untied Overclocking Technology. Please read “Untied Overclocking Technology” on page 22 for details.

2.This motherboard supports Dual Channel Memory Technology. Before you implement Dual Channel Memory Technology, make sure to read the installation guide of memory modules on page 13 for proper installation.

3.Whether 1800/1600MHz memory speed is supported depends on the AM3 CPU you adopt. If you want to adopt DDR3 1800/1600 memory module on this motherboard, please refer to the memory support list on our website for the compatible memory modules.

ASRock website http://www.asrock.com

4.Due to the operating system limitation, the actual memory size may be less than 4GB for the reservation for system usage under Windows® 7 / VistaTM / XP. For Windows® OS with 64-bit CPU, there is no such limitation.

5.The maximum shared memory size is defined by the chipset vendor and is subject to change. Please check AMD website for the latest information.

6.Before installing SATAII hard disk to SATAII connector, please read the “SATAII Hard Disk Setup Guide” on page 25 of “User Manual” in the support CD to adjust your SATAII hard disk drive to SATAII mode. You can also connect SATA hard disk to SATAII connector directly.

7.It is a user-friendly ASRock overclocking tool which allows you to surveil your system by hardware monitor function and overclock your hardware devices to get the best system performance under Windows® environment. Please visit our website for the operation procedures of ASRock OC Tuner. ASRock website: http://www.asrock.com

ASRock 760GM-GS3 / 760GM-S3 Motherboard

8.Featuring an advanced proprietary hardware and software design, Intelligent Energy Saver is a revolutionary technology that delivers unparalleled power savings. The voltage regulator can reduce the number of output phases to improve efficiency when the CPU cores are idle. In other words, it is able to provide exceptional power saving and improve power efficiency without sacrificing computing performance. To use Intelligent Energy Saver function, please enable Cool ‘n’ Quiet option in the BIOS setup in advance. Please visit our website for the operation procedures of Intelligent Energy Saver.

ASRock website: http://www.asrock.com

9.ASRock Instant Flash is a BIOS flash utility embedded in Flash ROM. This convenient BIOS update tool allows you to update system BIOS without entering operating systems first like MS-DOS or Windows®. With this utility, you can press <F6> key during the POST or press <F2> key to BIOS setup menu to access ASRock Instant Flash. Just launch this tool and save the new BIOS file to your USB flash drive, floppy disk or hard drive, then you can update your BIOS only in a few clicks without preparing an additional floppy diskette or other complicated flash utility. Please be noted that the USB flash drive or hard drive must use FAT32/16/12 file system.

10.The software name itself – OC DNA literally tells you what it is capable of. OC DNA, an exclusive utility developed by ASRock, provides a convenient way for the user to record the OC settings and share with others. It helps you to save your overclocking record under the operating system and simplifies the complicated recording process of overclocking settings. With OC DNA, you can save your OC settings as a profile and share with your friends! Your friends then can load the OC profile to their own system to get the same OC settings as yours! Please be noticed that the OC profile can only be shared and worked on the same motherboard.

11.To experience intuitive motion controlled games is no longer only available at Wii. ASRock AIWI utility introduces a new way of PC gaming operation. ASRock AIWI is the world's first utility to turn your iPhone/iPod touch as a game joystick to control your PC games. All you have to do is just to install the ASRock AIWI utility either from ASRock official website or ASRock software support CD to your motherboard, and also download the free AIWI Lite from App store to your iPhone/iPod touch. Connecting your PC and apple devices via Bluetooth or WiFi networks, then you can start experiencing the exciting motion controlled games. Also, please do not forget to pay attention to ASRock official website regularly, we will continuously provide you the most up-do-date supported games! ASRock website: http://www.asrock.com/Feature/Aiwi/index.asp

English

9

ASRock 760GM-GS3 / 760GM-S3 Motherboard

12.If you desire a faster, less restricted way of charging your Apple devices, such as iPhone/iPod/iPad Touch, ASRock has prepared a wonderful solution for you - ASRock APP Charger. Simply installing the APP Charger driver, it makes your iPhone charged much quickly from your computer and up to 40% faster than before. ASRock APP Charger allows you to quickly charge many Apple devices simultaneously and even supports continuous charging when your PC enters into Standby mode (S1), Suspend to RAM (S3), hibernation mode (S4) or power off (S5). With APP Charger driver installed, you can easily enjoy the marvelous charging experience than ever.

ASRock website: http://www.asrock.com/Feature/AppCharger/index.asp

13.Although this motherboard offers stepless control, it is not recommended to perform over-clocking. Frequencies other than the recommended CPU bus frequencies may cause the instability of the system or damage the CPU.

14.While CPU overheat is detected, the system will automatically shutdown. Before you resume the system, please check if the CPU fan on the motherboard functions properly and unplug the power cord, then plug it back again. To improve heat dissipation, remember to spray thermal grease between the CPU and the heatsink when you install the PC system.

15.EuP, stands for Energy Using Product, was a provision regulated by European Union to define the power consumption for the completed system. According to EuP, the total AC power of the completed system shall be under 1.00W in off mode condition. To meet EuP standard, an EuP ready motherboard and an EuP ready power supply are required. According to Intel’s suggestion, the EuP ready power supply must meet the standard of 5v standby power efficiency is higher than 50% under 100 mA current consumption. For EuP ready power supply selection, we recommend you checking with the power supply manufacturer for more details.

English

1 0

ASRock 760GM-GS3 / 760GM-S3 Motherboard

2. Installation

This is a Micro ATX form factor (9.6-in x 7.2-in, 24.4 cm x 18.3 cm) motherboard. Before you install the motherboard, study the configuration of your chassis to ensure that the motherboard fits into it.

Pre-installation Precautions

Take note of the following precautions before you install motherboard components or change any motherboard settings.

Before you install or remove any component, ensure that the power is switched off or the power cord is detached from the power supply. Failure to do so may cause severe damage to the motherboard, peripherals, and/or components.

1.Unplug the power cord from the wall socket before touching any component.

2.To avoid damaging the motherboard components due to static electricity, NEVER place your motherboard directly on the carpet or the like. Also remember to use a grounded wrist strap or touch a safety grounded object before you handle components.

3.Hold components by the edges and do not touch the ICs.

4.Whenever you uninstall any component, place it on a grounded antistatic pad or in the bag that comes with the component.

5.When placing screws into the screw holes to secure the motherboard to the chassis, please do not over-tighten the screws! Doing so may damage the motherboard.

English

1 1

ASRock 760GM-GS3 / 760GM-S3 Motherboard

2.1CPU Installation

Step 1. Unlock the socket by lifting the lever up to a 90o angle.

Step 2. Position the CPU directly above the socket such that the CPU corner with the golden triangle matches the socket corner with a small triangle.

Step 3. Carefully insert the CPU into the socket until it fits in place.

The CPU fits only in one correct orientation. DO NOT force the CPU into the socket to avoid bending of the pins.

Step 4. When the CPU is in place, press it firmly on the socket while you push down the socket lever to secure the CPU. The lever clicks on the side tab to indicate that it is locked.

Lever 90° Up

 

 

 

CPU Golden Triangle

 

 

Socker Corner Small Triangle

 

STEP 1:

STEP 2 / STEP 3:

STEP 4:

Lift Up The Socket Lever

Match The CPU Golden Triangle

Push Down And Lock

 

To The Socket Corner Small

The Socket Lever

 

Triangle

 

2.2 Installation of CPU Fan and Heatsink

After you install the CPU into this motherboard, it is necessary to install a larger heatsink and cooling fan to dissipate heat. You also need to spray thermal grease between the CPU and the heatsink to improve heat dissipation. Make sure that the CPU and the heatsink are securely fastened and in good contact with each other. Then connect the CPU fan to the CPU FAN connector (CPU_FAN1, see Page 2, No. 6). For proper installation, please kindly refer to the instruction manuals of the CPU fan and the heatsink.

English

1 2

ASRock 760GM-GS3 / 760GM-S3 Motherboard

2.3 Installation of Memory Modules (DIMM)

760GM-GS3 / 760GM-S3 motherboard provides two 240-pin DDR3 (Double Data Rate 3) DIMM slots, and supports Dual Channel Memory Technology. For dual channel configuration, you always need to install two identical (the same brand, speed, size and chip-type) memory modules in the DDR3 DIMM slots to activate Dual Channel Memory Technology. Otherwise, it will operate at single channel mode.

1.It is not allowed to install a DDR or DDR2 memory module into DDR3 slot;otherwise, this motherboard and DIMM may be damaged.

2.If you install only one memory module or two non-identical memory modules, it is unable to activate the Dual Channel Memory Technology.

Installing a DIMM

Please make sure to disconnect power supply before adding or removing DIMMs or the system components.

Step 1. Unlock a DIMM slot by pressing the retaining clips outward.

Step 2. Align a DIMM on the slot such that the notch on the DIMM matches the break on the slot.

The DIMM only fits in one correct orientation. It will cause permanent damage to the motherboard and the DIMM if you force the DIMM into the slot at incorrect orientation.

Step 3. Firmly insert the DIMM into the slot until the retaining clips at both ends fully snap back in place and the DIMM is properly seated.

1 3

English

ASRock 760GM-GS3 / 760GM-S3 Motherboard

2.4 Expansion Slots (PCI and PCI Express Slots)

There are 2 PCI slots and 2 PCI Express slots on this motherboard.

PCI slots: PCI slots are used to install expansion cards that have the 32-bit PCI interface.

PCIE slots:

PCIE1 (PCIE x1 slot; Blue) is used for PCI Express cards with x1 lane width cards, such as Gigabit LAN card, SATA2 card, etc.

PCIE2 (PCIE x16 slot; Blue) is used for PCI Express cards with x16 lane width graphics cards.

Installing an expansion card

Step 1. Before installing the expansion card, please make sure that the power supply is switched off or the power cord is unplugged. Please read the documentation of the expansion card and make necessary hardware settings for the card before you start the installation.

Step 2. Remove the bracket facing the slot that you intend to use. Keep the screws for later use.

Step 3. Align the card connector with the slot and press firmly until the card is completely seated on the slot.

Step 4. Fasten the card to the chassis with screws.

English

1 4

ASRock 760GM-GS3 / 760GM-S3 Motherboard

2.5 Multi Monitor Feature

This motherboard supports multi monitor feature. With the internal VGA output support and the external add-on PCI Express VGA card, you can easily enjoy the benefits of multi monitor feature.

Please refer to the following steps to set up a surround display environment:

1.Install the ATITM PCI Express VGA cards on PCIE2 slot. Please refer to page 14 for proper expansion card installation procedures for details.

2.Connect D-Sub monitor cable to VGA port on the I/O panel. And connect other monitor cables to the corresponding connectors of the add-on PCI Express VGA cards on PCIE2 slot.

VGA port

3.Boot your system. Press <F2> to enter BIOS setup. Enter “Share Memory” option to adjust the memory capability to [32MB], [64MB], [128MB] [256MB] or [512MB] to enable the function of VGA. Please make sure that the value

you select is less than the total capability of the system memory. If you do not adjust the BIOS setup, the default value of “Share Memory”, [Auto], will disable VGA function when the add-on VGA card is inserted to this motherboard.

4.Install the onboard VGA driver and the add-on PCI Express VGA card driver to your system. If you have installed the drivers already, there is no need to install them again.

5.Set up a multi-monitor display.

For Windows® XP / XP 64-bit OS:

Right click the desktop, choose “Properties”, and select the “Settings” tab so that you can adjust the parameters of the multi-monitor according to the steps below.

A.Click the “Identify” button to display a large number on each monitor.

B.Right-click the display icon in the Display Properties dialog that you wish to be your primary monitor, and then select “Primary”. When you use multiple monitors with your card, one monitor will always be Primary, and all additional monitors will be designated as Secondary.

C.Select the display icon identified by the number 2.

D.Click “Extend my Windows desktop onto this monitor”.

English

1 5

ASRock 760GM-GS3 / 760GM-S3 Motherboard

E.Right-click the display icon and select “Attached”, if necessary.

F.Set the “Screen Resolution” and “Color Quality” as appropriate for the second monitor. Click “Apply” or “OK” to apply these new values.

G.Repeat steps C through E for the diaplay icon identified by the number one, two and three.

For Windows® 7 / 7 64-bit / VistaTM / VistaTM 64-bit OS:

Right click the desktop, choose “Personalize”, and select the “Display Settings” tab so that you can adjust the parameters of the multi-monitor according to the steps below.

A.Click the number ”2” icon.

B.Click the items “This is my main monitor” and “Extend the desktop onto this monitor”.

C.Click “OK” to save your change.

D.Repeat steps A through C for the display icon identified by the number three.

6.Use multi monitor feature. Click and drag the display icons to positions representing the physical setup of your monitors that you would like to use. The placement of display icons determines how you move items from one monitor to another.

English

1 6

ASRock 760GM-GS3 / 760GM-S3 Motherboard

Jumper
PS2_USB_PW1
(see p.2, No. 1)

2.6Jumpers Setup

The illustration shows how jumpers are setup. When the jumper cap is placed on pins, the jumper is “Short”. If no jumper cap is placed on pins, the jumper is “Open”. The illustration shows a 3-pin jumper whose pin1 and

pin2 are “Short” when jumper cap is placed on Short Open these 2 pins.

Setting

Short pin2, pin3 to enable +5VSB (standby) for PS/2 or

USB wake up events. Note: To select +5VSB, it requires 2 Amp and higher standby current provided by

power supply.

Clear CMOS Jumper

(CLRCMOS1)

(see p.2, No. 9) Default Clear CMOS

Note: CLRCMOS1 allows you to clear the data in CMOS. The data in CMOS includes system setup information such as system password, date, time, and system setup parameters. To clear and reset the system parameters to default setup, please turn off the computer and unplug the power cord from the power supply. After waiting for 15 seconds, use a jumper cap to short pin2 and pin3 on CLRCMOS1 for 5 seconds. However, please do not clear the CMOS right after you update the BIOS. If you need to clear the CMOS when you just finish updating the BIOS, you must boot up the system first, and then shut it down before you do the clearCMOS action.

English

1 7

ASRock 760GM-GS3 / 760GM-S3 Motherboard

English

2.7 Onboard Headers and Connectors

Onboard headers and connectors are NOT jumpers. Do NOT place jumper caps over these headers and connectors. Placing jumper caps over the headers and connectors will cause permanent damage of the motherboard!

Floppy Connector

(33-pin FLOPPY1)

(see p.2 No. 21)

the red-striped side to Pin1

Note: Make sure the red-striped side of the cable is plugged into Pin1 side of the connector.

Primary IDE connector (Blue)

(39-pin IDE1, see p.2 No. 10)

connect the blue end

connect the black end

to the motherboard

to the IDE devices

80-conductor ATA 66/100/133 cable

Note: Please refer to the instruction of your IDE device vendor for the details.

Serial ATAII Connectors

(SATAII_1 (PORT 0):

 

 

see p.2, No. 17)

 

 

(SATAII_2 (PORT 1):

 

SATAII_3 SATAII_4

 

 

see p.2, No. 16)

 

(PORT 2) (PORT 3)

(SATAII_3 (PORT 2):

 

 

see p.2, No. 13)

SATAII_1

SATAII_2

(SATAII_4 (PORT 3):

(PORT 0)

(PORT 1)

see p.2, No. 14)

 

 

These four Serial ATAII (SATAII) connectors support SATAII

or SATA hard disk for internal storage devices. The current SATAII interface allows up to 3.0 Gb/s data transfer rate.

Serial ATA (SATA)

Either end of the SATA data cable

Data Cable

can be connected to the SATA /

(Optional)

SATAII hard disk or the SATAII

 

connector on this motherboard.

1 8

ASRock 760GM-GS3 / 760GM-S3 Motherboard

USB 2.0 Headers

Besides four default USB 2.0

(9-pin USB6_7)

ports on the I/O panel, there are

(see p.2 No. 19)

two USB 2.0 headers on this

 

motherboard. Each USB 2.0

 

header can support two USB

 

2.0 ports.

(9-pin USB4_5)

 

(see p.2 No. 18)

 

Print Port Header

This is an interface for print

(25-pin LPT1)

port cable that allows

(see p.2 No. 22)

convenient connection of printer

 

devices.

Front Panel Audio Header

This is an interface for the front

(9-pin HD_AUDIO1)

panel audio cable that allows

(see p.2, No. 23)

convenient connection and

 

control of audio devices.

1.High Definition Audio supports Jack Sensing, but the panel wire on the chassis must support HDA to function correctly. Please follow the instruction in our manual and chassis manual to install your system.

2.If you use AC’97 audio panel, please install it to the front panel audio header as below:

A.Connect Mic_IN (MIC) to MIC2_L.

B.Connect Audio_R (RIN) to OUT2_R and Audio_L (LIN) to OUT2_L.

C.Connect Ground (GND) to Ground (GND).

D.MIC_RET and OUT_RET are for HD audio panel only. You don’t need to connect them for AC’97 audio panel.

E.To activate the front mic.

For Windows® XP / XP 64-bit OS:

Select “Mixer”. Select “Recorder”. Then click “FrontMic”. For Windows® 7 / 7 64-bit / VistaTM / VistaTM 64-bit OS:

Go to the "FrontMic" Tab in the Realtek Control panel. Adjust “Recording Volume”.

English

1 9

ASRock 760GM-GS3 / 760GM-S3 Motherboard

English

System Panel Header

This header accommodates

(9-pin PANEL1)

several system front panel

(see p.2 No. 15)

functions.

Chassis Speaker Header

 

Please connect the chassis

(4-pin SPEAKER 1)

 

speaker to this header.

(see p.2 No. 8)

 

 

 

 

Chassis and Power Fan Connectors

Please connect the fan cables

(3-pin CHA_FAN1)

 

to the fan connectors and

(see p.2 No. 20)

 

match the black wire to the

(3-pin PWR_FAN1)

 

 

(see p.2 No. 28)

 

 

 

 

 

CPU Fan Connector

1

Please connect the CPU fan

(4-pin CPU_FAN1)

cable to this connector and

2

(see p.2 No. 6)

3

match the black wire to the

4

ground pin.

Though this motherboard provides 4-Pin CPU fan (Quiet Fan) support, the 3-Pin CPU fan still can work successfully even without the fan speed control function. If you plan to connect the 3-Pin CPU fan to the CPU fan connector on this motherboard, please connect it to Pin 1-3.

 

 

 

 

Pin 1-3 Connected

 

 

 

 

 

 

3-Pin Fan Installation

 

 

 

 

 

 

ATX Power Connector

12

24

Please connect an ATX power

(24-pin ATXPWR1)

 

 

supply to this connector.

 

(see p.2 No. 7)

 

 

 

 

 

 

 

1

13

 

 

 

 

 

 

 

 

Though this motherboard provides 24-pin ATX power connector,

12

24

 

it can still work if you adopt a traditional 20-pin ATX power supply.

 

 

 

 

To use the 20-pin ATX power supply, please plug your power

 

 

 

supply along with Pin 1 and Pin 13.

 

 

 

 

 

 

20-PinATX Power Supply Installation

1

13

 

 

 

 

 

 

 

 

 

 

 

 

2 0

ASRock 760GM-GS3 / 760GM-S3 Motherboard

ATX 12V Power Connector

Please connect an ATX 12V

(4-pin ATX12V1)

power supply to this connector.

(see p.2 No. 2)

 

2.8 Driver Installation Guide

To install the drivers to your system, please insert the support CD to your optical drive first. Then, the drivers compatible to your system can be auto-detected and listed on the support CD driver page. Please follow the order from up to bottom side to install those required drivers. Therefore, the drivers you install can work properly.

2.9Installing Windows® 7 / 7 64-bit / VistaTM /

VistaTM 64-bit / XP / XP 64-bit With RAID Functions

If you want to install Windows® 7 / 7 64-bit / VistaTM / VistaTM 64-bit / XP / XP 64-bit on your SATA / SATAII HDDs with RAID functions, please refer to the document at the following path in the Support CD for detailed procedures:

..\ RAID Installation Guide

2.10 Installing Windows® 7 / 7 64-bit / VistaTM /

VistaTM 64-bit / XP / XP 64-bit Without RAID Functions

If you want to install Windows® 7 / 7 64-bit / VistaTM / VistaTM 64-bit / XP / XP 64-bit OS on your SATA / SATAII HDDs without RAID functions, please follow below procedures according to the OS you install.

2.10.1 Installing Windows® XP / XP 64-bit Without RAID Functions

If you want to install Windows® XP / XP 64-bit on your SATA / SATAII HDDs without RAID functions, please follow below steps.

Using SATA / SATAII HDDs without NCQ and Hot Plug functions (IDE mode) STEP 1: Set up BIOS.

A.

Enter BIOS SETUP UTILITY

 

Advanced screen

 

Storage

 

 

Configuration.

B.Set the “SATA Operation Mode” option to [IDE].

STEP 2: Install Windows® XP / XP 64-bit OS on your system.

2 1

English

ASRock 760GM-GS3 / 760GM-S3 Motherboard

2.10.2 Installing Windows® 7 / 7 64-bit / VistaTM / VistaTM 64-bit Without RAID Functions

If you want to install Windows® 7 / 7 64-bit / VistaTM / VistaTM 64-bit on your SATA / SATAII HDDs without RAID functions, please follow below steps.

Using SATA / SATAII HDDs without NCQ and Hot Plug functions (IDE mode) STEP 1: Set up BIOS.

A.

Enter BIOS SETUP UTILITY

 

Advanced screen

 

Storage

 

 

Configuration.

B.Set the “SATA Operation Mode” option to [IDE].

STEP 2: Install Windows® 7 / 7 64-bit / VistaTM / VistaTM 64-bit OS on your system.

Using SATA / SATAII HDDs with NCQ and Hot Plug functions (AHCI mode)

STEP 1: Set Up BIOS.

A.

Enter BIOS SETUP UTILITY

 

Advanced screen

 

Storage

 

 

Configuration.

B.Set the “SATA Operation Mode” option to [AHCI].

STEP 2: Install Windows® 7 / 7 64-bit / VistaTM / VistaTM 64-bit OS on your system.

2.11 Untied Overclocking Technology

This motherboard supports Untied Overclocking Technology, which means during overclocking, FSB enjoys better margin due to fixed PCI / PCIE buses. Before you enable Untied Overclocking function, please enter “Overclock Mode” option of BIOS setup to set the selection from [Auto] to [Manual]. Therefore, CPU FSB is untied during overclocking, but PCI / PCIE buses are in the fixed mode so that FSB can operate under a more stable overclocking environment.

Please refer to the warning on page 8 for the possible overclocking risk before you apply Untied Overclocking Technology.

English

2 2

ASRock 760GM-GS3 / 760GM-S3 Motherboard

3. BIOS Information

The Flash Memory on the motherboard stores BIOS Setup Utility. When you start up the computer, please press <F2> during the Power-On-Self-Test (POST) to enter BIOS Setup utility; otherwise, POST continues with its test routines. If you wish to enter BIOS Setup after POST, please restart the system by pressing <Ctl> + <Alt> + <Delete>, or pressing the reset button on the system chassis. The BIOS Setup program is designed to be user-friendly. It is a menu-driven program, which allows you to scroll through its various sub-menus and to select among the predetermined choices. For the detailed information about BIOS Setup, please refer to the User Manual (PDF file) contained in the Support CD.

4. Software Support CD information

This motherboard supports various Microsoft® Windows® operating systems: 7 / 7 64-bit / VistaTM / VistaTM 64-bit / XP / XP Media Center / XP 64-bit. The Support CD that came with the motherboard contains necessary drivers and useful utilities that will enhance motherboard features. To begin using the Support CD, insert the CD into your CD-ROM drive. It will display the Main Menu automatically if “AUTORUN” is enabled in your computer. If the Main Menu does not appear automatically, locate and double-click on the file “ASSETUP.EXE” from the “BIN” folder in the Support CD to display the menus.

English

2 3

ASRock 760GM-GS3 / 760GM-S3 Motherboard

1. Einführung

Wir danken Ihnen für den Kauf des ASRock 760GM-GS3 / 760GM-S3 Motherboard, ein zuverlässiges Produkt, welches unter den ständigen, strengen Qualitätskontrollen von ASRock gefertigt wurde. Es bietet Ihnen exzellente Leistung und robustes Design, gemäß der Verpflichtung von ASRock zu Qualität und Halbarkeit.

Diese Schnellinstallationsanleitung führt in das Motherboard und die schrittweise Installation ein. Details über das Motherboard finden Sie in der Bedienungsanleitung auf der Support-CD.

Da sich Motherboard-Spezifikationen und BIOS-Software verändern können, kann der Inhalt dieses Handbuches ebenfalls jederzeit geändert werden. Für den Fall, dass sich Änderungen an diesem Handbuch ergeben, wird eine neue Version auf der ASRock-Website, ohne weitere Ankündigung, verfügbar sein. Die neuesten Grafikkarten und unterstützten CPUs sind auch auf der ASRock-Website aufgelistet.

ASRock-Website: http://www.asrock.com

Wenn Sie technische Unterstützung zu Ihrem Motherboard oder spezifische Informationen zu Ihrem Modell benötigen, besuchen Sie bitte unsere Webseite:

www.asrock.com/support/index.asp

1.1 Kartoninhalt

ASRock 760GM-GS3 / 760GM-S3 Motherboard

(Micro ATX-Formfaktor: 24.4 cm x 18.3 cm; 9.6 Zoll x 7.2 Zoll) ASRock 760GM-GS3 / 760GM-S3 Schnellinstallationsanleitung ASRock 760GM-GS3 / 760GM-S3 Support-CD

Zwei Seriell-ATA- (SATA) Datenkabel (Option) Ein I/O Shield

Deutsch

2 4

ASRock 760GM-GS3 / 760GM-S3 Motherboard

1.2Spezifikationen

Plattform

- Micro ATX-Formfaktor: 24.4 cm x 18.3 cm; 9.6 Zoll x 7.2 Zoll

CPU

- Unterstützung von Socket AM3-Prozessoren: AMD PhenomTM

 

II X6 / X4 / X3 / X2 (außer 920 / 940) / Athlon X4 / X3 / X2 /

 

Sempron-Prozessor

 

- Sechs-Kern-CPU-bereit

 

- Unterstützt AMD OverDriveTM mit ACC-Funktion (Advanced

 

Clock Calibration, Erweiterte Taktkalibrierung)

 

- AMD LIVE!TM-bereit

 

- Unterstützt Cool ‘n’ QuietTM-Technologie von AMD

 

- FSB 2600 MHz (5.2 GT/s)

 

- Unterstützt Untied-Übertaktungstechnologie

 

(siehe VORSICHT 1)

 

- Unterstützt Hyper-Transport- 3.0 Technologie (HT 3.0)

Chipsatz

- Northbridge: AMD 760G

 

- Southbridge: AMD 710

Speicher

- Unterstützung von Dual-Kanal-Speichertechnologie

 

(siehe VORSICHT 2)

 

- 2 x Steckplätze für DDR3

 

- Unterstützt DDR3 1800(OC)/1600(OC)/1333/1066/800

 

non-ECC, ungepufferter Speicher (siehe VORSICHT 3)

 

- Max. Kapazität des Systemspeichers: 8GB

 

(siehe VORSICHT 4)

Erweiterungs-

- 1 x PCI Express 2.0 x16-Steckplatz (blau für x16-Modus)

steckplätze

- 1 x PCI Express 2.0 x1-Steckplatz

 

- 2 x PCI -Steckplätze

Onboard-VGA

- Integrierte AMD Radeon HD 3000-Grafik

 

- DX10 Klasse iGPU, Pixel Shader 4.0

 

- Maximal gemeinsam genutzter Speicher 512 MB

 

(siehe VORSICHT 5)

 

- Unterstützt D-Sub mit einer maximalen Auflösung von

 

2048 x 1536 bei 60 Hz

 

 

Audio

- 5.1 CH HD Audio (Realtek ALC662 Audio Codec)

LAN

- 760GM-GS3

 

Realtek PCIE x1 Gigabit LAN RTL8111E,

 

speed 10/100/1000 Mb/s

 

- 760GM-S3

 

Realtek PCIEx1 LAN 8105EL, speed 10/100 Mb/s

 

- Unterstützt Wake-On-LAN

 

 

Deutsch

2 5

ASRock 760GM-GS3 / 760GM-S3 Motherboard

Deutsch

2 6

 

E/A-Anschlüsse

I/O Panel

 

an der

- 1 x PS/2 Mouse Port

 

Rückseite

- 1 x PS/2 Keyboard Port

 

 

- 1 x Serieller port: COM 1

 

 

- 1 x VGA Port

 

 

- 4 x Ready-to-Use USB 2.0 Ports

 

 

- 1 x RJ-45 LAN Port mit LED (ACT/LINK LED und SPEED LED)

 

 

- Audioanschlüsse: Line In / Line Out / Mikrofon

 

Anschlüsse

- 4 x SATAII-Anschlüsse, unterstützt bis 3.0 Gb/s

 

 

Datenübertragungsrate, unterstützt RAID (RAID 0, RAID 1,

 

 

RAID 10 und JBOD), NCQ, AHCI und “Hot Plug” Funktionen

 

 

(siehe VORSICHT 6)

 

 

- 1 x ATA133 IDE-Anschlüsse (Unterstützt bis 2 IDE-Geräte)

 

 

- 1 x FDD-Anschlüsse

 

 

- 1 x Druckerport-Anschlussleiste

 

 

- CPU/Gehäuse/Strom-Lüfteranschluss

 

 

- 24-pin ATX-Netz-Header

 

 

- 4-pin anschluss für 12V-ATX-Netzteil

 

 

- Anschluss für Audio auf der Gehäusevorderseite

 

 

- 2 x USB 2.0-Anschlüsse (Unterstützung 4 zusätzlicher

 

 

USB 2.0-Anschlüsse)

 

 

 

 

BIOS

- 8Mb AMI BIOS

 

 

- AMI legal BIOS mit Unterstützung für “Plug and Play”

 

 

- ACPI 1.1-Weckfunktionen

 

 

- JumperFree-Modus

 

 

- SMBIOS 2.3.1

 

 

- CPU, VCCM, NB Stromspannung Multianpassung

 

 

 

 

Support-CD

- Treiber, Dienstprogramme, Antivirussoftware

 

 

(Probeversion), AMD OverDriveTM-Dienstprogramm,

 

 

ASRock-Software-Suite (CyberLink DVD Suite und Creative

 

 

Sound Blaster X-Fi MB) (OEMund Testversion)

 

Einzigartige

- ASRock OC Tuner (siehe VORSICHT 7)

 

Eigenschaft

- Intelligent Energy Saver (Intelligente Energiesparfunktion)

 

 

(siehe VORSICHT 8)

 

 

- Sofortstart

 

 

- ASRock Instant Flash (siehe VORSICHT 9)

 

 

- ASRock OC DNA (siehe VORSICHT 10)

 

 

- ASRock AIWI (siehe VORSICHT 11)

 

 

- ASRock APP Charger (siehe VORSICHT 12)

 

 

- Hybrid Booster:

 

 

- Schrittloser CPU-Frequenz-Kontrolle

 

 

(siehe VORSICHT 13)

 

 

 

ASRock 760GM-GS3 / 760GM-S3 Motherboard

-ASRock U-COP (siehe VORSICHT 14)

-Boot Failure Guard (B.F.G. – Systemstartfehlerschutz)

Hardware Monitor - CPU-Temperatursensor

 

- Motherboardtemperaturerkennung

 

- Drehzahlmessung für CPU/Gehäuse/Stromlüfter

 

- CPU-Lüftergeräuschdämpfung

 

- Spannungsüberwachung: +12V, +5V, +3.3V, Vcore

Betriebssysteme

- Unterstützt Microsoft® Windows® 7 / 7 64-Bit / VistaTM /

 

VistaTM 64-Bit / XP / XP Media Center / XP 64-Bit

Zertifizierungen

- FCC, CE, WHQL

-Gemäß Ökodesign-Richtlinie (ErP/EuP) (Stromversorgung gemäß Ökodesign-Richtlinie (ErP/EuP) erforderlich)

(siehe VORSICHT 15)

*Für die ausführliche Produktinformation, besuchen Sie bitte unsere Website: http://www.asrock.com

WARNUNG

Beachten Sie bitte, dass Overclocking, einschließlich der Einstellung im BIOS, Anwenden der Untied Overclocking-Technologie oder Verwenden von Overclocking-Werkzeugen von Dritten, mit einem gewissen Risiko behaftet ist. Overclocking kann sich nachteilig auf die Stabilität Ihres Systems auswirken oder sogar Komponenten und Geräte Ihres Systems beschädigen. Es geschieht dann auf eigene Gefahr und auf Ihre Kosten. Wir übernehmen keine Verantwortung für mögliche Schäden, die aufgrund von Overclocking verursacht wurden.

VORSICHT!

1.Dieses Motherboard unterstützt die Untied-Übertaktungstechnologie. Unter “Entkoppelte Übertaktungstechnologie” auf Seite 22 finden Sie detaillierte Informationen.

2.Dieses Motherboard unterstützt Dual-Kanal-Speichertechnologie. Vor Implementierung der Dual-Kanal-Speichertechnologie müssen Sie die Installationsanleitung für die Speichermodule auf Seite 13 zwecks richtiger Installation gelesen haben.

3.Ob die Speichergeschwindigkeit 1800/1600 MHz unterstützt wird, hängt von der von Ihnen eingesetzten AM3-CPU ab. Schauen Sie bitte auf unseren Internetseiten in der Liste mit unterstützten Speichermodulen nach, wenn Sie DDR3 1800/1600-Speichermodule einsetzen möchten.

ASRock-Internetseite: http://www.asrock.com

4.Durch Betriebssystem-Einschränkungen kann die tatsächliche Speichergröße weniger als 4 GB betragen, da unter Windows® 7 / Vista™ / XP etwas Speicher zur Nutzung durch das System reserviert wird. Unter Windows® OS mit 64-Bit-CPU besteht diese Einschränkung nicht.

2 7

Deutsch

ASRock 760GM-GS3 / 760GM-S3 Motherboard

Deutsch

2 8

5.Die Maximalspeichergröße ist von den Chipshändler definiert und umgetauscht. Bitte überprüfen Sie AMD website für die neuliche Information.

6.Vor Installation der SATAII-Festplatte an den SATAII-Anschluss lesen Sie bitte “Setup-Anleitung für SATAII-Festplatte” auf Seite 25 der “Bedienungsanleitung” auf der Support-CD, um Ihre SATAII-Festplatte dem SATAII-Modus anzugleichen. Sie können die SATA-Festplatte auch direkt mit dem SATAII-Anschluss verbinden.

7.Es ist ein benutzerfreundlicher ASRock Übertaktenswerkzeug, das erlaubt, dass Sie Ihr System durch den Hardware-Monitor Funktion zu überblicken und Ihre Hardware-Geräte übertakten, um die beste Systemleistung unter der Windows® Umgebung zu erreichen. Besuchen Sie bitte unsere Website für die Operationsverfahren von ASRock OC Tuner. ASRock-Website: http://www.asrock.com

8.Mit einer eigenen, modernen Hardware und speziellem Softwaredesign, bietet der Intelligent Energy Saver eine revolutionäre Technologie zur bisher unerreichten Energieeinsparung. Ein Spannungsregler kann die Anzahl von Ausgangsphasen zur Effektivitätsverbessserung reduzieren, wenn sich die CPU im Leerlauf befindet. Mit anderen Worten: Sie genießen außergewöhnliche Energieeinsparung und verbesserten Wirkungsgrad ohne Leistungseinschränkungen. Wenn Sie die Intelligent Energy Saver-Funktion nutzen möchten, aktivieren Sie zuvor die „Cool ‘n’ Quiet“-Option im BIOS. Weitere Bedienungshinweise zum Intelligent Energy Saver finden Sie auf unseren Internetseiten. ASRock-Internetseite: http://www.asrock.com

9.ASRock Instant Flash ist ein im Flash-ROM eingebettetes BIOS-Flash- Programm. Mithilfe dieses praktischen BIOS-Aktualisierungswerkzeugs können Sie das System-BIOS aktualisieren, ohne dafür zuerst Betriebssysteme wie MS-DOS oder Windows® aufrufen zu müssen. Mit diesem Programm bekommen Sie durch Drücken der <F6>-Taste während des POST-Vorgangs oder durch Drücken der <F2>-Taste im BIOS-Setup-Menü Zugang zu ASRock Instant Flash. Sie brauchen dieses Werkzeug einfach nur zu starten und die neue BIOS-Datei auf Ihrem USB-Flash-Laufwerk, Diskettenlaufwerk oder der Festplatte zu speichern, und schon können Sie Ihr BIOS mit nur wenigen Klickvorgängen ohne Bereitstellung einer zusätzlichen Diskette oder eines anderen komplizierten Flash-Programms aktualisieren. Achten Sie darauf, dass das USB-Flash-Laufwerk oder die Festplatte das Dateisystem FAT32/16/12 benutzen muss.

10.Allein der Name – OC DNA* – beschreibt es wörtlich, was die Software zu leisten vermag. OC DNA ist ein von ASRock exklusiv entwickeltes Dienstprogramm, das Nutzern eine bequeme Möglichkeit bietet, Übertaktungseinstellungen aufzuzeichnen und sie Anderen mitzuteilen. Es hilft Ihnen, Ihre Übertaktungsaufzeichnung im Betriebssystem zu speichern und vereinfacht den komplizierten Aufzeichnungsvorgang von Übertaktungseinstellungen. Mit OC DNA können Sie Ihre Übertaktungseinstellungen als Profil abspeichern und Ihren Freunden

ASRock 760GM-GS3 / 760GM-S3 Motherboard

zugänglich machen! Ihre Freunde können dann das Übertaktungsprofil auf ihren eigenen Systemen laden, um dieselben Übertaktungseinstellungen. Mit OC DNA können Sie Ihre Übertaktungseinstellungen als Profil abspeichern und Ihren Freunden zugänglich machen! Ihre Freunde können dann das Übertaktungsprofil auf ihren eigenen Systemen laden, um dieselben Übertaktungseinstellungen wie Sie zu erhalten! Beachten Sie bitte, dass das Übertaktungsprofil nur bei einem identischen Motherboard gemeinsam genutzt und funktionsfähig gemacht werden kann. Übertaktungseinstellungen wie Sie zu erhalten! Beachten Sie bitte, dass das Übertaktungsprofil nur bei einem identischen Motherboard gemeinsam genutzt und funktionsfähig gemacht werden kann.

11.Das Erlebnis intuitiver, bewegungsgesteuerter Spiele ist nicht mehr nur noch an der Wii möglich. Das ASRock AIWI-Dienstprogramm führt eine neue Möglichkeit der PC-Spielsteuerung ein. ASRock AIWI ist das weltweit erste Dienstprogramm, mit dem Sie Ihr iPhone/iPod touch in einen Joystick zur Steuerung Ihrer PC-Spiele verwandeln können. Sie müssen lediglich das ASRock AIWI-Dienstprogramm – entweder von der offiziellen ASRock-Webseite oder der ASRock-Software-CD Ihres Motherboards – installieren sowie das kostenlose AIWI Lite vom App Store auf Ihr iPhone/iPod touch herunterladen. Verbinden Sie Ihren PC und das Apple-Gerät via Bluetooth oder Wi-Fi-Netzwerk – schon können Sie die bewegungsgesteuerten Spiele genießen. Bitte denken Sie außerdem daran, regelmäßig einen Blick auf die offizielle ASRockWebseite zu werfen; wir bieten stets topaktuelle Informationen über die unterstützten Spiele!

ASRock-Webseite: http://www.asrock.com/Feature/Aiwi/index.asp

12.Wenn Sie nach einer schnelleren, weniger eingeschränkten Möglichkeit zur Aufladung Ihrer Apple-Geräte (z. B. iPhone/iPad/iPod touch) suchen, bietet ASRock Ihnen eine wunderbare Lösung – den ASRock APP Charger. Installieren Sie einfach den ASRock APP Charger-Treiber; dadurch lädt sich Ihr iPhone wesentlich schneller über einen Computer auf – genaugenommen bis zu 40 % schneller als zuvor. Der ASRock APP Charger ermöglicht Ihnen die schnelle Aufladung mehrerer AppleGeräte gleichzeitig; der Ladevorgang wird sogar dann fortgesetzt, wenn der PC den Ruhezustand (S1), Suspend to RAM-Modus (S3) oder Tiefschlafmodus (S4) aufruft oder ausgeschaltet wird (S5). Nach der Installation des APP Charger-Treibers können Sie im Handumdrehen das großartigste Ladeerlebnis überhaupt genießen. ASRock-Webseite: http:// www.asrock.com/Feature/AppCharger/index.asp

13.Obwohl dieses Motherboard stufenlose Steuerung bietet, wird Overclocking nicht empfohlen. Frequenzen, die von den empfohlenen CPU-Busfrequenzen abweichen, können Instabilität des Systems verursachen oder die CPU beschädigen.

Deutsch

2 9

ASRock 760GM-GS3 / 760GM-S3 Motherboard

14.Wird eine Überhitzung der CPU registriert, führt das System einen automatischen Shutdown durch. Bevor Sie das System neu starten, prüfen Sie bitte, ob der CPU-Lüfter am Motherboard richtig funktioniert, und stecken Sie bitte den Stromkabelstecker aus und dann wieder ein. Um die Wärmeableitung zu verbessern, bitte nicht vergessen, etwas Wärmeleitpaste zwischen CPU und Kühlkörper zu sprühen.

15.EuP steht für Energy Using Product und kennzeichnet die ÖkodesignRichtlinie, die von der Europäischen Gemeinschaft zur Festlegung des Energieverbrauchs von vollständigen Systemen in Kraft gesetzt wurde. Gemäß dieser Ökodesign-Richtlinie (EuP) muss der gesamte Netzstromverbrauch von vollständigen Systemen unter 1,00 Watt liegen, wenn sie ausgeschaltet sind. Um dem EuP-Standard zu entsprechen, sind ein EuP-fähiges Motherboard und eine EuP-fähige Stromversorgung erforderlich. Gemäß einer Empfehlung von Intel muss eine EuP-fähige Stromversorgung dem Standard entsprechen, was bedeutet, dass bei einem Stromverbrauch von 100 mA die 5-Volt-Standby-Energieeffizienz höher als 50% sein sollte. Für die Wahl einer EuP-fähigen Stromversorgung empfehlen wir Ihnen, weitere Details beim Hersteller der Stromversorgung abzufragen.

Deutsch

3 0

ASRock 760GM-GS3 / 760GM-S3 Motherboard

Loading...
+ 125 hidden pages