Asko W6661 Design Guide
Planning and Design Guide
2002 Vrs 2.0
DISHWASHERS WASHERS DRYERS ACCESSORIES INSTALLATION
ASKO DISHWASHERS
Dimensions & Technical Data
D1706 ..............................................................................2
D1716...............................................................................3
D1776...............................................................................4
D1976...............................................................................5
Changing Standard Front Panels.............................................6
D1796FI and D1996FI.........................................................7
Fitting the D1796FI and D1996FI Custom Door Panel ..............8
D1796FI and D1996FI Custom Panel Installation Options..........9
D1996HNDL.....................................................................10
D1996SS.........................................................................11
Optional Accessories............................................................12
Fully Integrated Fill Strip Installations................................13
ASKO LAUNDRY
Washers: Dimensions & Technical Data
W6021 ............................................................................15
W6441 ............................................................................16
W6661 ............................................................................17
Dryers: Dimensions & Technical Data
T701 ...............................................................................18
T721 ...............................................................................19
T731 ...............................................................................20
T761 ...............................................................................21
T781 ...............................................................................22
Stacked Pair Installations
W6021/W6441 and T701 .................................................23
W6021/W6441 and T721 .................................................24
W6441 and T731 .............................................................25
W6661 and T761 .............................................................26
W6661 and T781 .............................................................27
Cabinet/Closet Installations
Stacked Installations ...........................................................28
Single Unit Installations........................................................29
Side-by-side Installations.....................................................30
Optional Accessories............................................................31
This planning guide provides unit dimensions, cutout
dimensions, and utility locations only. For more
details, refer to the installation instructions that are
supplied with the unit.
Specifications are subject to change without notice. See installation instructions for additional details.
15
UNIT DIMENSIONS
US Metric
Height 33-1/2"–34-1/2" 850–876 mm
Width 23-7/16" 595 mm
Depth 24-7/16" 621 mm
Weight 167 lb 73 kg
MODEL W6021
TECHNICAL DATA
Supply voltage Single-phase 230 V, 60 Hz
Water Pressure 15-146 psi
Heating element 2000 W
Internal Fuse 15 A
Power cord (attached) 220 V, 20 Amp
ASKO WASHER
Every ASKO washer is delivered ready-fitted with a plug and is
intended for connection to an ASKO dryer, which is equipped with
a matching receptacle. If the washer is used separately or with
another dryer, it must be on a separate 220 V, 20 Amp singlephase circuit.
Second-floor (above grade) installations must meet all local
building codes.
When placing the washer next to a wall or cabinet, be sure to
leave 1/2" (12 mm) of space between the washer and the wall
or cabinet.
See pages 23–25 for stacked washer/dryer dimensions.
See pages 28–30 for cutout dimensions for closet and undercabinet installations.
Specifications are subject to change without notice. See installation instructions for additional details.
16
MODEL W6441
ASKO WASHER
UNIT DIMENSIONS
US Metric
Height 33-1/2"–34-1/2" 850–876 mm
Width 23-7/16" 595 mm
Depth 24-7/16" 621 mm
Weight 167 lb 73 kg
TECHNICAL DATA
Supply voltage Single-phase 230 V, 60 Hz
Water Pressure 15-146 psi
Heating element 2000 W
Internal Fuse 15 A
Power cord (attached) 220 V, 20 Amp
Every ASKO washer is delivered ready-fitted with a plug and is
intended for connection to an ASKO dryer, which is equipped with
a matching receptacle. If the washer is used separately or with
another dryer, it must be on a separate 220 V, 20 Amp singlephase circuit.
Second-floor (above grade) installations must meet all local
building codes.
When placing the washer next to a wall or cabinet, be sure to
leave 1/2" (12 mm) of space between the washer and the wall or
cabinet.
See pages 23–25 for stacked washer/dryer dimensions.
See pages 28–30 for cutout dimensions for closet and undercabinet installations.
Stain
Programs
Heavy
Normal
Perma
press
Quick
Super quick
Drain
Spin
Rinse
Hand/
Delicate
Wool
Specifications are subject to change without notice. See installation instructions for additional details.
17
ASKO WASHER
MODEL W6661
UNIT DIMENSIONS
US Metric
Height 33-1/2"–34-1/2" 850–876 mm
Width 23-7/16" 595 mm
Depth 23-7/16" 595 mm
Weight 174 lb 79 kg
TECHNICAL DATA
Supply voltage Single-phase 230 V, 60 Hz
Water Pressure 15-146 psi
Heating element 2000 W
Internal Fuse 15 A
Power cord (attached) 220 V, 20 Amp
Every ASKO washer is delivered ready-fitted with a plug and is
intended for connection to an ASKO dryer, which is equipped with
a matching receptacle. If the washer is used separately or with
another dryer, it must be on a separate 220 V, 20 Amp single-
phase circuit.
Second-floor (above grade) installations must meet all local
building codes.
When placing the washer next to a wall or cabinet, be sure to
leave 1/2" (12 mm) of space between the washer and the wall
or cabinet.
See pages 26–27 for stacked washer/dryer dimensions.
See pages 28–30 for cutout dimensions for closet and undercabinet installations.
Specifications are subject to change without notice. See installation instructions for additional details.
18
UNIT DIMENSIONS
US Metric
Height 33-1/2"–34-1/2 850–876 mm
Width 23-7/16" 595 mm
Depth 24-7/16" 621 mm
Weight 86 lb 39 kg
MODEL T701 VENTED DRYER
TECHNICAL DATA
Supply voltage Single-phase 230 V, 60 Hz
Heating element 2500 W
Internal Fuse 15 A
NOTE: When on a separate outlet, use 220 V, 15 Amp
single-phase circuit. When an ASKO washer is
connected, use 220 V, 30 Amp single-phase circuit.
The door hinges on ASKO dryers are shipped left-hinged, but they
are reversible. See the Dryer Use and Care Guide for more
information.
When placing the dryer next to a wall or cabinet, be sure to leave
1/2" (12 mm) of space between the dryer and the wall or cabinet.
See page 23 for stacked washer/dryer dimensions.
See pages 28–30 for cutout dimensions for closet and undercabinet installations.
Venting Requirements
WARNING! To reduce the risk of fire, vented dryers
must be exhausted OUTDOORS or the equivalent.
Never cover the end of the dryer stub or vent hose with
anything to catch lint, except for a UL-approved vent
basket.
The hose should be run with as few bends as possible to the point
of discharge. If necessary, it can be extended to a maximum of 20
feet (610 mm) of 4 in (10 cm) diameter ridged pipe. Make any
bends as gentle as possible. A maximum of four 90˚ bends may
Subtract 4 feet (660 mm)
for every 90˚ elbow.
be fitted in the hose, otherwise the performance of the dryer will
be impeded. Subtract 4 feet of hose for every 90˚ elbow.
If the hose is taken to a wall outlet, a ventilation grill should be
fitted to prevent reverse flow of cold air. Fit the ventilation grill to
the outside or inside of the wall.
This appliance should not be exhausted into a chimney, a wall, a
ceiling, or a concealed space of a building. Only a metal ventilation
grill should be used.
ASKO DRYER
Installation Examples
Specifications are subject to change without notice. See installation instructions for additional details.
19
ASKO DRYER
UNIT DIMENSIONS
US Metric
Height 33-1/2"–34-1/2 850–876 mm
Width 23-7/16" 595 mm
Depth 24-7/16" 621 mm
Weight 103 lb 47 kg
MODEL T721 CONDENSER DRYER
TECHNICAL DATA
Supply voltage Single-phase 230 V, 60 Hz
Heating element 2500 W
Internal Fuse 15 A
NOTE: When on a separate outlet, use 220 V, 15 Amp
single-phase circuit. When an ASKO washer is
connected, use 220 V, 30 Amp single-phase circuit.
The door hinges on ASKO dryers are shipped left-hinged, but they
are reversible. See the Dryer Use and Care Guide for more
information.
When placing the dryer next to a wall or cabinet, be sure to leave
1/2" (12 mm) of space between the dryer and the wall or cabinet.
See page 24 for stacked washer/dryer dimensions.
See pages 28–30 for cutout dimensions for closet and undercabinet installations.
Condensation Drain Requirements
If possible, you should install the dryer so the condensed water
will continuously flow into a drain or sink. To do this, follow the
instructions below:
1. Disconnect the short hose (1) from the blue connection.
(It’s okay to let the hose hang down.)
2. Connect the rubber hose supplied with the dryer to the blue
nipple (2).
3. Run the hose to a drain or sink, as illustrated.
NOTE: The drain hose must not be more than 40" above the floor
or the bottom of the unit.
Back of dryer
1
3
3
40"
(1016 mm)
maximum
height
2
Loading...